- Internal Walls, Sloped Roofs and Ceilings
- Provides Continuous Vapour Control Layer
- Reaction to Fire Euroclass B-s1, d0
- Insulation & Drylining in one Application
- BBA Certification No.10/4803.
In Stock
- Brand: Xtratherm®
- Model: 52.5mm SR/TB-MF
- Dimensions: 2,400mm x 1,200mm x 52.50mm
- SKU: 52.5mm MF
- Product code: P1-1111
- MPN: 52.5mm SR/TB-MF Safe-R
Options available
52.5mm Safe-R SR/TB-MF Thermal Liner Mech-Fix Insulated Plasterboard is a combination of 40mm premium phenolic foam insulation core with a composite foil facing bonded to 12.5mm tapered edge plasterboard for dry lining internal walls, sloped roofs and ceilings.
Safe-R Xtratherm SR/TB-MF Thermal Liner range is a high-efficiency thermal insulation with a certified thermal conductivity (lambda value) as low as 0.021W/mK.
SR/TB-MF is an easy to install and decorate 3 in 1 solution which provides high-levels of insulation, dry-lining and vapour control layer in 2400mm x 1200mm x 52.5mm insulated board.
Safe-R Xtratherm SR/TB-MF 'Mech Fix' is suitable for new build and refurbishment projects to save money by reducing the heat loss from buildings.
The composite facings on both sides of the SR/TB-MF thermal liner board incorporate an integral vapour barrier, which helps to reduce the risk of condensation.
Xtratherm products are stable, rot proof and will remain effective for the life span of the building (depending on specification and installation).
Care should be taken to avoid contact with acids, petrol, alkalis and mineral oil, when contact is made, clean materials in a safe manner before installation.
Ensure tight fitting of the insulation boards to achieve continuity of insulation as asked for within the ACDs.
The insulation boards can be readily cut using a sharp knife or fine toothed saw.
When it comes to health and safety, Xtratherm boards are chemically inert and safe to use.
Safe-R SR/TB-MF Thermal Laminate is only suitable for mechanically fixed applications.
Specification:
Width: 1200mm
Length: 2400mm
Pack Quantity: 7
Pack Coverage: 20.16m2
R-Value: 1.75m2K/W
Thermal Conductivity: 0.021W/mK
Compressive Strength: >120 (kPa)
Reaction to Fire: Euroclass B-s1, d0
Key points:
· Three-in-one solution.
· Integral vapour control layer.
· Reduced insulation thickness.
· Mechanical fix applications.
· Highly responsive insulation system.
· High levels of insulation and drylining in one fix.
· Euroclass B-s1 d0 fire classification.
· Suitable for newbuild, retrofit and refurbishment.
· Thermal conductivity (lambda value) of 0.021 W/mK.
· Suitable for drylining internal walls, sloped roofs and ceilings.
· Standard size 2400mm x 1200mm (8 x 4) boards.
· Superior performance phenolic insulation.
· Insulation, drylining and vapour barrier in one board.
· Easy to handle and install.
Integral vapour control layer:
· The composite glass tissue facing on SR/TB-MF provides a gas and vapour tight barrier, reducing the condensation risk.
· A continuous vapour control layer is created when the Xtratherm Safe-R SR/TB-MF joints are sealed and taped in accordance with drylining good practice.
· Thanks to its low emissivity foil facings SR/TB-MF, facing into an unventilated air void between battens, will improve the U-Value of the wall.
Handling, Cutting and Storage:
· Xtratherm insulation should be stored off the ground, on a clean flat surface and must be stored under cover.
· The polythene wrapping is not considered adequate protection for outside exposure.
· Care should be taken to protect the insulation in storage and during the build process.
· Appropriate PPE should be worn when handling insulation.
Certification:
· BBA Certification No.10/4803.
· BS EN ISO 9001 Quality Management System.
· BS EN ISO 14001 Environmental Management System.
· Standard - BS EN 13166.
*Further information may be found in our Downloads section.
Fairly easy access to all PDF files.
Datasheet ǀ Declaration of Performance - DoP ǀ BBA Certificate ǀ Installation Guide ǀ Certificates ǀ Brochure ǀ SPEC Sheet
*Special Product - Non returnable cancelable.
specification | |
Board covarage | 20.16 m2 |
Length | 2400mm |
Material | Phenolic core ǀ Gypsum plasterboard |
Pack Coverage | 20.16m2 |
Pack Quantity | 7 |
R-Value | 1.75m2K/W |
Thermal Conductivity | 0.021W/mK |
Thickness | 52.5mm |
Width | 1200mm |
Coverage | 20.16m2 |
Finish | Glass tissue facing |
Quantity | 7 |
Shipping method | Articulated Vehicle ǀ Courier |
Applications | Internal Walls ǀ Ceilings ǀ Sloped Roof |
BBA Certified | Yes (no. 10/4803) |
Vapour Control Layer | Yes, build in |
Fixing method | Mechanically Fixed |
Decoration | Skim plaster |
ETA Notification | Yes |
Features | Integral vapour barrier thermal-liner |
Manufacturer | Xtratherm Safe-R® |
We deliver insulation materials to Mainland UK only. Deliveries to Highlands, Northern Ireland, Isle of Wight etc.. might be possible at additional cost.
We offer free delivery on most of the orders above £300 (excluding VAT) (except special products - shipping cost via courier - products marked ''Request A Quote'')
Delivery of some insulation materials might be extended due to the current situation (Covid-19, stock shortages, allocations).
If you need materials quickly please contact us - we will do our best to help you source materials needed.
We do not deliver on weekends and bank holidays. Sometimes we can deliver on Saturdays - please check with us before placing the order.
If you need any further information please contact us tel. 02081910776
We can help to calculate price per m2 or linear meter (one meter in length) cost, please just contact us via phone 02081910776, email or live chat. Alternatively, you can work it out yourself quickly and easily: to get cost per meter square please divide price shown in orange area by ''Required area (m2)'' Example price of £28.80 divided by board coverage 2.88m2 = cost of £10.00 per m2.
INSTALLERS
No matter whether you choose a local installer or a national company, there’s a few tips to help you find the right installer for your home insulation improvements, such as asking for recommendations and making sure that they’re part of a certification scheme. This makes sure that they have the right skills and standards of workmanship to carry out the installation, and you can be sure that they know exactly what they are doing.
4 TIPS FOR CHOOSING THE BEST INSULATION INSTALLER
1. Thermal inspection picture in portfolio
It’s worth seeing a installer’s previous work. There’s no harm asking if you can see any properties nearby that they’ve installed insulation in. Best way would be to see Infrared Thermal Imaging Inspections. Thermal cameras spot small, but key changes in temperature in different areas of a house, identifying problematic areas that the human eye never could and some that a visual inspection could only hypothesize.
2. Reviews
Along with checking recommendations and previous work, finding reviews online can often be a great way to find out if they provide a good service or not. However, it’s best not to solely rely on reviews you may find or review websites, as there’s no controlling who writes them.
3. Compare prices
Comparing prices will also ensure companies can’t take advantage of you and give you a fair price.
4. Word of Mouth
The best way to find a great insulation installer is through recommendations. Make sure you ask friends and family. They will most likely give you their honest opinion and can tell you from first hand experience.
Whether you require a wall, cladding, external wall, loft or floor insulation fitted, you can find and hire your local insulation installers from popular UK web pages. A simple internet search will return thousands of potential installers near your area.
https://www.nia-uk.org/find-an-installer/
https://www.ratedpeople.com/local-thermal-insulation
STOCKIST
We are the stockist of construction materials and related products for both trade and DIY from most recognizable brands in the UK like Cordek, RCM, Promat, Rockwool, Isover, Celotex, Xtratherm, Ursa, Low-E, Cedral, Kingspan, Dufaylite, British Gypsum, K-rend, Ecotherm, Iko enertherm, Kay-Metzeler, Terrawool to allow you to complete your insulation job on time at competitive prices and the highest standards.