- Insulation and Decking in one Fix
- Rapid Weather Proofing - OSB Deck
- For New Build and Refurbishment Roofs
- R-Value: 2.28m2K/W
- Thermal Conductivity: 0.022 W/mk
In Stock
- Brand: Xtratherm®
- Model: 59mm OSB
- Weight: 27.58kg
- Dimensions: 2,400mm x 1,200mm x 59mm
- SKU: 59mm
- Product code: P1-237
- MPN: 59mm-Ply-Deck
Options available
59mm Plydeck Xtratherm (PIR with OSB Board) Flat Roof Insulation Decking is a three-in-one solution designed to provide decking, vapour control layer and high levels of thermal insulation in one easy applicable flat roof product.
Xtratherm Plydeck is a composite board of enhanced PIR (polyisocyanurate) core faced with foil on one side and 9mm OSB board on the other side which is very useful when applying hot bitumen on a flat roof without damaging the insulation.
Wide range of thicknesses available: 24mm, 29mm, 34mm, 39mm, 44mm, 49mm, 54mm, 59mm, 69mm, 74mm, 79mm, 84mm, 89mm, 99mm, 109mm, 119mm, 129mm, 139mm, 149mm, 159mm, 174mm.
High-efficiency polyisocyanurate (polyiso) foam insulation core is a commonly used material in the construction industry, produced as a foam and used as rigid thermal insulation.
The insulation core and composite foil facings resist attack by mould, fungi, bacteria and microbial growth.
The roof construction is a critical element in the building fabric and is an area at high risk of heat loss.
Using Xtratherm Plydeck Thin-R will reduce heat loss while also delivering excellent thermal bridging details.
Specification:
Thickness: 59mm overall
Size: 1200mm x 2400mm
Board coverage: 2.88m2
Density (Foam Core): 32 Kg/m3
Weight: approx. 27.58kg
Thermal Conductivity: 0.022 W/mk
R-Value: 2.28m2K/W
Compressive Strength: >150 kPa
Water Vapour Resistivity: >100 MNs/gm
Key Points
· Insulation & decking in one fix
· For new & refurbishment roofs
· Rapid weather proofing
· Easy to Install
OSB Insulation Deck Flat Roof Insulation
All edges should be supported - add noggings where necessary.
Stagger fixings where boards are butted.
Boards should be embedded in vapour resistant mastic to provide a vapour control layer in conjunction with foil facing.
Mastic should be laid wide enough to facilitate 2 panel edges and be continuous around all edges.
OSB Insulation Deck should be staggered and butted.
Each edge should have a minimum bearing of 20mm on joist.
*Further information may be found in our Downloads section.
Fairly easy access to all PDF files.
Datasheet ǀ Declaration of Performance - DoP ǀ BBA Certificate ǀ Installation Guide ǀ Certificates ǀ Brochure ǀ SPEC Sheet
*Thermal conductivity is dependent on facings and product thickness.
*Special Product - Non returnable cancelable.
specification | |
Board covarage | 2.88 m2 |
Compressive Strength | 150 kPa |
Density | 32 Kg/m3 |
Length | 2400mm |
Material | Polyisocyanurate PIR ǀ OSB |
R-Value | 2.28m2K/W |
Size | 1200mm x 2400mm |
Thermal Conductivity | 0.022 W/mk |
Thickness | 59mm overall |
Water Vapour Resistivity | 100 MNs/gm |
Weight | approx. 27.58kg |
Width | 1200mm |
Vapour Resistivity | 100 MNs/gm |
Finish | Aluminium foil face ǀ OSB reverse face |
Shipping method | Articulated Vehicle ǀ Courier |
Applications | Flat Roof ǀ Hot Bitumen ǀ Decking |
ETA Notification | Yes |
Features | Highly-durable three-in-one solution |
Manufacturer | Xtratherm® |
We deliver insulation materials to Mainland UK only. Deliveries to Highlands, Northern Ireland, Isle of Wight etc.. might be possible at additional cost.
We offer free delivery on most of the orders above £300 (excluding VAT) (except special products - shipping cost via courier - products marked ''Request A Quote'')
Delivery of some insulation materials might be extended due to the current situation (Covid-19, stock shortages, allocations).
If you need materials quickly please contact us - we will do our best to help you source materials needed.
We do not deliver on weekends and bank holidays. Sometimes we can deliver on Saturdays - please check with us before placing the order.
If you need any further information please contact us tel. 02081910776
We can help to calculate price per m2 or linear meter (one meter in length) cost, please just contact us via phone 02081910776, email or live chat. Alternatively, you can work it out yourself quickly and easily: to get cost per meter square please divide price shown in orange area by ''Required area (m2)'' Example price of £28.80 divided by board coverage 2.88m2 = cost of £10.00 per m2.
INSTALLERS
No matter whether you choose a local installer or a national company, there’s a few tips to help you find the right installer for your home insulation improvements, such as asking for recommendations and making sure that they’re part of a certification scheme. This makes sure that they have the right skills and standards of workmanship to carry out the installation, and you can be sure that they know exactly what they are doing.
4 TIPS FOR CHOOSING THE BEST INSULATION INSTALLER
1. Thermal inspection picture in portfolio
It’s worth seeing a installer’s previous work. There’s no harm asking if you can see any properties nearby that they’ve installed insulation in. Best way would be to see Infrared Thermal Imaging Inspections. Thermal cameras spot small, but key changes in temperature in different areas of a house, identifying problematic areas that the human eye never could and some that a visual inspection could only hypothesize.
2. Reviews
Along with checking recommendations and previous work, finding reviews online can often be a great way to find out if they provide a good service or not. However, it’s best not to solely rely on reviews you may find or review websites, as there’s no controlling who writes them.
3. Compare prices
Comparing prices will also ensure companies can’t take advantage of you and give you a fair price.
4. Word of Mouth
The best way to find a great insulation installer is through recommendations. Make sure you ask friends and family. They will most likely give you their honest opinion and can tell you from first hand experience.
Whether you require a wall, cladding, external wall, loft or floor insulation fitted, you can find and hire your local insulation installers from popular UK web pages. A simple internet search will return thousands of potential installers near your area.
https://www.nia-uk.org/find-an-installer/
https://www.ratedpeople.com/local-thermal-insulation
STOCKIST
We are the stockist of construction materials and related products for both trade and DIY from most recognizable brands in the UK like Cordek, RCM, Promat, Rockwool, Isover, Celotex, Xtratherm, Ursa, Low-E, Cedral, Kingspan, Dufaylite, British Gypsum, K-rend, Ecotherm, Iko enertherm, Kay-Metzeler, Terrawool to allow you to complete your insulation job on time at competitive prices and the highest standards.