Wallrock Fireliner FR (545mm x 20m - 10.90m2 roll) is a Class 0, fire rated lining paper that provides protection to vulnerable surfaces from fire.

FireLiner Lining Paper produces a very strong base on problem surfaces that cannot be covered by conventional wall coverings.

Wallrock can be used for covering plaster, plasterboard, insulating wallpapers and thermal boards without having to apply a plaster skim.

Once dry, Wallrock Fireliner FR Lining Paper can be easily emulsion painted or overhung with another wallcovering products.

Wallrock contains fire retardant additives so fire risk is limited even when the paper is peeling or has been applied over normally flammable surfaces.

Engineered within the product are other class leading Wallrock features, a no nonsense paper - strong, durable and easy to hang.

Wallrock Fireliner FR can be used on a whole variety of problematic walls and ceilings, adding fire protection to cracked and damaged surfaces.

Using Wallrock walls can be covered quickly and easily, and because of its class leading strength and durability it will also help to reinforce wall surfaces.

Developed with the best modern materials and technology to enable old and tired walls to be smooth once more for years to come.

Recommended adhesive (consumption 0.3kg per m2) Wallrock Power Adhesive, or for ultimate protection use Wallrock Thermal Liner FR Adhesive.

Specification:

Thickness: 1mm

Roll Width: 545mm

Roll Length: 20000mm

Roll Coverage: 10.90m²

Material: FR Lining Paper

Profile: Class 0 fire rated

Applications: walls, ceilings, plaster, plasterboard, insulating wallpapers and thermal boards.

Wallrock Fireliner FR Lining Paper Features:

 · Contains no PVC.

 · Class 0 fire rated.

 · Allows walls to breathe.

 · Paste the wall or the paper.

 · Produces a very strong base.

 · No need to apply a plaster skim.

 · Strong, durable and easy to hang.

 · Contains active fire retardants.

 · Reinforces vulnerable and damaged surfaces.

 · Available in 2 roll sizes: 55cm x 10m or 55cm x 20m.

 · Contains textile fibres for strength and durability.

 · Helps protect vulnerable surfaces in the event of a fire.

 · Can be emulsion painted or overhung with another wallcovering products.

 · Can be used for covering plaster, plasterboard, wallpapers and thermal boards.

Wallrock Fireliner FR Lining Paper Installation Guide:

 · Cut all lengths required allowing extra for trim at each end, or simply hang directly from the roll onto a pre-pasted wall or ceiling.

 · Apply the inner surface to the wall.

 · Please note Wallrock Fireliner can also be hung horizontally, especially useful if you intend to overhang with a decorative wallpaper.

 · Mark a guideline with a pencil for the first length, using a plumbline as a guide for vertical drops or a spirit level for horizontal application.

 · If applying the adhesive directly to the wall or ceilings, apply enough to hang one or two lengths at a time, ensuring the paste exceeds the width of the second length.

 · If pasting the material (either side) make sure all edges are covered.

 · With both methods, hang Wallrock Fireliner immediately - no soaking is required.

 · Apply the first length along the guideline and smooth out with a wallpaper brush then trim the ends.

 · Butt join all subsequent lengths being careful not to overlap the edges.

 · Allow Wallrock to dry thoroughly before decorating with emulsion paint or overhanging with another wallcovering (normally 24 hours is sufficient).

 · Wallrock Fireliner is also ‘dry strippable’ in many applications.

 · We strongly recommend the use of a good quality ready mixed adhesive.

 · Recommended adhesive (consumption 0.3kg per m2) Wallrock Power Adhesive, for application of this product.

 · For extra fire protection use Wallrock Thermal Liner FR Adhesive.

*Further information may be found in our Downloads section.

Fairly easy access to all PDF files.

Datasheet ǀ Declaration of Performance - DoP ǀ BBA Certificate ǀ Installation Guide ǀ Certificates ǀ Brochure ǀ SPEC Sheet