Wallrock Ready-Mixed Power Adhesive 10kg is a high performance extra strength ready-to-use wallcovering adhesive powered by Wallrock.

Power Adhesive is already mixed glue suitable for hanging all types of wallpapers - no mixing is required as it’s already mixed.

The smooth, easy to use adhesive has excellent wet tack properties and slides easily for perfect hanging and pattern matching.

Wallrock Power Adhesive consumption 0.2kg - 0.4kg per m2 for application of Wallrock Fireliner Fire Rated Lining Paper.

Using Wallrock walls can be covered quickly and easily, and because of its class leading strength and durability it will also help to reinforce wall surfaces.

Developed with the best modern materials and technology to enable old and tired walls to be smooth once more for years to come.

Specification:

Coverage: 0.2kg – 0.4kg per m²

Material: Power Adhesive

Profile: Ready-to-use

Applications: Walls and ceilings

Wallrock Power Adhesive Features:

 · Suitable for most types of wallpaper.

 · High performance aqueous paste based on a blend of natural starches.

 · Thick, smooth, easy to use formula - roll or brush straight from tub.

 · Low splatter, high wet tack, easy to slide and position.

 · Added PVA for increased strength, resistance to moisture and humidity.

 · Contains an inhibitor to prevent mould, yeast and fungal grow.

Wallrock Ready-Mixed Power Adhesive Installation Guide:

 · Surface Preparation - surfaces should be clean, dry, sound and free from loose paint, plaster, dust and mould.

 · Drywall and other absorbent surfaces must be sized and completely left to dry.

 · Sizing should be completed at least 4 hours before. Pasting And Hanging - Paste-The-Wall

 · Refer to wallpaper manufacturers label for specific instructions. Ensure wallpaper is suitable for Paste-The-Wall application.

 · For best results use a roller to apply Wallrock Power Adhesive generously and evenly to the wall. Ensure coverage of the wall from floor to ceiling is complete.

 · A coverage rate of 1Kg per 5m2 (2.2lb per 53ft2) is suitable for most products.

 · Paste up to two widths of wallpaper at once to reduce decoration time and apply paper to the pasted wall.

 · Simply position the wallpaper sheet by sliding and smooth into the final place under pressure using a squeegee, wallpaper brush or damp sponge.

 · Complete hanging and trimming as normal.

 · Pasting And Hanging - Paste-The-Paper and refer to wallpaper manufacturers label for specific instructions - eg. soak time etc.

 · Protect surrounding areas (floor coverings and furniture etc) from splashes and drips.

 · Paste wallpaper generously, ensuring that edges are fully covered with the paste, allow heavyweight papers to soak until supple, (unless Paste-The-Wall products ie. Wallrock).

 · A coverage rate of 1Kg per 5m2 (2.2lb per 53ft2) is suitable for most products.

 · Ensure edges are stuck to the wall.

 · Remove any paste from the face of the wallpaper and surrounding area immediately with a damp cloth or sponge.

 · Clean tools and equipment in warm soapy water.

 · Important - Do not thin or add water to the adhesive.

 · Not suitable for hanging borders or overlapping seams on vinyl wallpapers.

 · For best results use vinyl to vinyl adhesive for hanging borders, overlapping seams, and for repairs.

 · Contains fungicide and biocide to inhibit mould, yeast and bacteria. Keep away from children and animals. Wash hands thoroughly after use.

 · Do not empty into drains or watercourses. Waste should be disposed of using authorised disposal routes and sites.

*Further information may be found in our Downloads section.

Fairly easy access to all PDF files.

Datasheet ǀ Declaration of Performance - DoP ǀ BBA Certificate ǀ Installation Guide ǀ Certificates ǀ Brochure ǀ SPEC Sheet