Largely manufactured from recycled glass (e.g. windscreens) and mineral base materials such as sand and without the use of binding agents. The ingredients are melted into molten glass, which is cooled and crushed into a fine powder. The powdered glass is poured into molds and heated (below the melting point) in a "sintering" process that causes the particles to adhere to one another. Next, a small amount of finely ground carbon-black is added and the material is heated in a "cellulation" process. Here, the carbon reacts with oxygen, creating carbon dioxide, which creates the insulating bubbles in the (material). CO2 accounts for more than 99% of the gas in the cellular spaces.
Cellulose insulation is a material made from recycled newspaper. The paper is shredded and inorganic salts, such as boric acid, are added for resistance to fire, mould, insects and vermin. The insulation is installed either blown or damp-sprayed depending on application.
Wood fibre
The success of wood fibre insulation derives from an attractive environmental profile combined with a whole bag of functions including rigid insulation, sheathing and sarking for timber frames, roofs and flooring as well as flexible insulation for studs and rafters.
Wood of course is renewable, it sequesters carbon during its growth and product production is relatively free from pollution. The insulation value of wood fibre boards is not as dimensionally efficient as some of the orthodox petro-chemical materials - but it's no slouch either - typically coming in with a 'k value' range of between 0.038-0.043 W/mK depending on format.
Hemp
Hemp fibres are produced from hemp straw of the hemp plant. Most hemp is imported, but an increasing amount of home-grown crop is becoming available. Hemp grows up to a height of nearly 4 metres within a period of 100-120 days. Because the plants shade the soil, no chemical protection or toxic additives are required for hemp cultivation. The product is composed of, usually, 85% hemp fibre with the ballance made up of polyester binding and 3-5% soda added for fire proofing.
Straw
Straw is an agricultural by-product, the dry stalks of cereal plants, after the grain and chaff have been removed. Straw makes up about half of the yield of cereal crops such asbarley, oats, rice, rye and wheat.
2-3mm White Angle Bead for Rendering is a versatile PVC corner bead profile for use on all external and internal rendering and plastering applications where a true, strong and sharp corner is required.
The PVC Angle Bead profile is a 2500mm trim designed for external corners, around window and do..
3mm PVC Mesh Wing Corner Bead with Extended Arris is an easy to install PVC angle beading for 3mm render thickness designed for external corners, around window and door reveals within a thin coat rendering or composite external wall insulation (EWI) systems.
Corner Profile with Extended Arris hel..
4-6mm Movement Bead and Expansion Joint Profile is a smart PVC White trim designed to protect the render from cracking and to allow the top-coat to expand and contract in changing weather conditions and the building movements over the years.
PVC Movement beading and expansion joint profile can be..
6-12mm External Bellcast Bead with Drip Nosing for Rendering is a strong PVC trim designed to protect the render against impact damage and water penetration in external wall insulation and thin coat render systems.
Bellcast beads with drip nose are designed to provide a stop to the render above t..
Asymmetric Corner and Window Reveal Profile for Cedral Lap White C01 Cladding is an universal aluminium trim that can be used to secure external corners and for use on the uprights of windows and doors (surround and support of the window and door units).
White C01 Window Reveal Asymmetric Corner ..
Length: 3000mm
Thickness: 0.9mm
Material: Aluminium (PPC)
External Corners - Window and Door Reveal applications
Symmetric Corner Profile for Cedral Lap White C01 Cladding Board is a comprehensive non-corrosive PPC aluminium trim that can be used vertically on 90 degree external corners of a build where the planks are lapped either side of the corner and for stop profile applications.
Cedral Lap Symmetric ..
Corner Bead with Mesh (External Wall Insulation) is an easy to install PVC profile with thin coat fibreglass mesh bonded to 90 degrees PVC angle beading designed for external corners, around window and door reveals within a thin coat rendering and EWI systems.
Corner Bead with Mesh 2500mm helps t..
White C01 Internal Corner Profile for Cedral Lap Cladding is an universal aluminium trim that can be used to finish the corner where Cedral plank meets an internal corner creating a seal between the profile and the corner.
Aluminium Internal Corner Trim White C01 is a 3000mm long Cedral Lap Weath..
Internal Corner Profile for White C01 Cedral Click Cladding Board is an universal aluminium W-shape vertical system trim that can be used to finish the corner where Cedral Weatherboard meets an internal corner forming a seal between the internal trim and the corner.
Aluminium Internal Corner Prof..
L-Corner Trim for Bison Batten Cladding (Ash Grey colour) is a 2500mm long profile with offset legs at 56mm and 51mm, an external corner trim used to finish corners or window and door reveals.
Wood Plastic Bison Cladding L Corners can be utilised for a wide variety of projects including but not l..
L-Corner Trim for Bison Batten Cladding (Ash Grey colour)
2500mm long profile with offset legs at 56mm and 51mm
External corner used to finish corners or window and door reveals
Ash Grey colour matched to suit Bison batten cladding planks
Offering modern design and easy installation - low maintenance
Steel Drip Trim 2000mm for Bison Batten Cladding (Ash Grey colour) is a powder coated steel drip flashing profile used above the window and door reveals to carry water away from the building.
Bison Cladding Steel Drip Trims should be cut to the width of the window or door and fitted to the joists..
Steel Drip Trim 2000mm for Bison Batten Cladding - Ash Grey
Steel drip flashing used above the window and door reveals
Use screw fixings at 300mm centres to fix the steel drip trim
Can also be used at the bottom of cladding to create drip edge
Hard-wearing colour matched powder coat finish system trim
4-6mm White Angle Bead for Rendering is a special PVC corner bead profile for use on all external and internal rendering and plastering applications where a true, strong and sharp corner is required.
The PVC Angle Bead profile is 2500mm plastic trim designed for external corners, around window an..
6-12mm Ivory (Magnolia) External Bellcast Bead with Drip Nosing is a strong PVC trim designed to protect the render against impact damage and water penetration in external wall insulation and thin coat render systems.
Bellcast beads with drip nose are designed to provide a stop to the render abov..
6-8mm White PVC Movement Bead and Expansion Joint Profile is a smart trim designed to protect the render from cracking and to allow the top-coat to expand and contract in changing weather conditions and the building movements over the years.
PVC Movement beading and expansion joint profile can be..
6mm Mesh Wing Corner Bead Extended Arris is a 2500mm x 120mm x 80mm Corner Profile with Extended Arris and alkali resistant fibreglass mesh attached to 90 degrees PVC angle bead for 6mm render thickness designed for external corners, around window and door reveals within a thin coat rendering or com..
6mm White Movement Corner Bead Joint Expansion Profile with Mesh is a special PVC angle trim used where minor movement and expansion in the top-coat structure is expected within External Wall Insulation (EWI) Systems.
Easy to handle and install plastic trim can be cut using metal snips or a fine ..
Asymmetric Corner and Window Reveal Profile for Cedral Lap Beige C02 Cladding is an universal aluminium trim that can be used to secure external corners and for use on the uprights of windows and doors (surround and support of the window and door units).
Beige C02 Window Reveal Asymmetric Corner ..
Length: 3000mm
Thickness: 0.9mm
Material: Aluminium (PPC)
External Corners - Window and Door Reveal applications
Beige C02 Internal Corner Profile for Cedral Click Cladding Board is an universal aluminium W-shape vertical system trim that can be used to finish the corner where Cedral Weatherboard meets an internal corner forming a seal between the internal trim and the corner.
Aluminium Internal Corner Prof..
Internal Corner Profile for Cedral Lap Beige C02 Cladding is a W-shape comprehensive non-corrosive PPC aluminium trim that can be used to finish the corner where Cedral plank meets an internal corner creating a seal between the profile and the corner.
Beige C02 Aluminium Internal Corner Trim is a..
L-Corner Profile for Bison Batten Cladding (Oak colour) is a 2.5m long system trim with offset legs at 56mm and 51mm, an external corner trim used to finish corners or window and door reveals.
Wood Plastic Bison Cladding L Corners can be utilised for a wide variety of projects including but not l..
L-Corner Trim for Bison Batten Cladding (Oak colour)
2500mm long profile with offset legs at 56mm and 51mm
External corner used to finish corners or window and door reveals
Oak colour matched to suit Bison batten cladding planks
Offering modern design and easy installation - low maintenance
Mesh Corner Bead PVC EWI Profile 2500mm is a universal plastic trim with thin coat fibre-glass rendering mesh (100/150mm) bonded to 90 degrees PVC angle beading designed for external corners, around window and door reveals within a thin coat rendering or composite external wall insulation (EWI) syst..
Steel Drip Profile for Bison Composite Cladding (Brown Oak colour) is a 2000mm long steel drip flashing trim used above the window and door reveals to carry water away from the building.
Bison Cladding Steel Drip Trims should be cut to the width of the window or door and fitted to the joists abov..
Steel Drip Trim 2m for Bison Batten Cladding - Brown Oak
Steel drip flashing used above the window and door reveals
Use screw fixings at 300mm centres to fix the steel drip trim
Can also be used at the bottom of cladding to create drip edge
Hard-wearing colour matched powder coat finish system trim
Beige C02 Symmetric Corner Profile for Cedral Lap Cladding is a comprehensive non-corrosive PPC aluminium trim that can be used vertically on 90 degree external corners of a build where the planks are lapped either side of the corner and for stop profile applications.
Symmetric Corner Profile Bei..
10-17mm External Bellcast Bead with Drip Nose is a special PVC White trim designed to protect the render against impact damage and water penetration in external wall insulation and thin coat render systems.
Bellcast beads with drip nose are designed to provide a stop to the render above the doors..
6-8mm Ivory (Magnolia) PVC Movement Bead and Expansion Joint Profile is a smart 2500mm trim designed to protect the render from cracking and to allow the top-coat to expand and contract in changing weather conditions and the building movements over the years.
PVC Movement beading and expansion jo..
6-8mm White Angle Beading for Rendering is a highly durable PVC corner bead profile for use on all external and internal rendering and plastering applications where a true, strong and sharp corner is required.
The PVC Angle Bead profile is a special 2500mm trim designed for external corners, arou..
6mm PVC Mesh Wing Corner Bead with Extended Arris is a 2500mm Angle Profile with Extended Arris and alkali resistant fibreglass mesh (100mm and 150mm) attached to 90 degrees PVC angle bead for 6mm render thickness.
Angle Mesh Wing Bead 6mm is designed for external corners, around window and door ..
Aluminium Corner Bead with Mesh 2500mm is a non-corrosive profile with thin coat fibreglass mesh (80mm both sides) bonded to 90° aluminium angle bead designed for external corners, around window and door reveals.
Mesh Corner Bead is an aluminium profile designed to get strong and sharp reinforced..
Asymmetric Corner and Window Reveal Profile for Cedral Lap Grey Brown C03 Cladding is a comprehensive non-corrosive PPC aluminium trim that can be used to secure external corners and for use on the uprights of windows and doors (surround and support of the window and door units).
Grey Brown C03 W..
Length: 3000mm
Thickness: 0.9mm
Material: Aluminium (PPC)
External Corners - Window and Door Reveal applications
Grey Brown C03 Internal Corner Profile for Cedral Lap Cladding is an universal aluminium trim that can be used to finish the corner where Cedral plank meets an internal corner creating a seal between the profile and the corner.
Aluminium Internal Corner Trim Grey Brown C03 is a 3000mm long Cedral..
Internal Corner Profile for Grey Brown C03 Cedral Click Cladding Board is a comprehensive non-corrosive aluminium W-shape vertical system trim used to finish the corner where Cedral Weatherboard meets an internal corner forming a seal between the internal trim and the corner.
Grey Brown C03 Alumi..
Grey Brown C03 Symmetric Corner Profile for Cedral Lap Cladding is an universal non-corrosive PPC aluminium trim that can be used vertically on 90 degree external corners of a build where the planks are lapped either side of the corner and for stop profile applications.
Symmetric Corner Profile G..
10-12mm White Movement Bead and Expansion Joint Profile is a smart PVC trim designed to protect the render from cracking and to allow the top-coat to expand and contract in changing weather conditions and the building movements over the years.
PVC Movement beading and expansion joint profile can ..
10-17mm Ivory (Magnolia) Bellcast Bead with Drip Nosing is a strong PVC trim designed to protect the render against impact damage and water penetration in external wall insulation and thin coat render systems.
Bellcast beads with drip nose are designed to provide a stop to the render above the do..
10mm PVC Mesh Wing Corner Bead with Extended Arris is a 2500m Corner Profile with Extended Arris and alkali resistant fibreglass mesh (100mm and 150mm) attached to 90 degrees PVC angle bead for 10mm render thickness designed for external corners, around window and door reveals within a thin coat ren..
6-8mm Ivory (Magnolia) Angle Bead for Rendering is a versatile PVC corner bead profile for use on all external and internal rendering and plastering applications where a true, strong and sharp corner is required.
The Ivory PVC Angle Bead profile is a 2500mm special trim designed for external corn..
Grey C05 Asymmetric Corner and Window Reveal Profile for Cedral Lap Cladding is an universal aluminium system trim that can be used to secure external corners and for use on the uprights of windows and doors (surround and support of the window and door units).
Window Reveal Asymmetric Corner Prof..
Length: 3000mm
Thickness: 0.9mm
Material: Aluminium (PPC)
External Corners - Window and Door Reveal applications
Grey C05 Internal Corner Profile for Cedral Lap Cladding is an universal aluminium system trim that can be used to finish the corner where Cedral plank meets an internal corner creating a seal between the profile and the corner.
Aluminium Internal Corner Trim Grey C05 is a 3000mm long Cedral Lap ..
Internal Corner Profile for Grey C05 Cedral Click Cladding Board is an universal aluminium W-shape vertical system trim used to finish the corner where Cedral Weatherboard meets an internal corner forming a seal between the internal trim and the corner.
Grey C05 Aluminium Internal Corner Profile ..
Grey C05 Symmetric Corner Profile for Cedral Lap Cladding is a comprehensive non-corrosive PPC aluminium trim that can be used vertically on 90 degree external corners of a build where the planks are lapped either side of the corner and for stop profile applications.
Symmetric Corner Profile Grey..
10-12mm Ivory (Magnolia) Movement Bead and Expansion Joint Profile is a smart PVC trim designed to protect the render from cracking and to allow the top-coat to expand and contract in changing weather conditions and the building movements over the years.
PVC Movement beading and expansion joint p..
13-22mm White Bellcast Bead with Drip Nosing is a strong PVC trim designed to protect the render against impact damage and water penetration in external wall insulation and thin coat render systems.
Bellcast beads with drip nose are designed to provide a stop to the render above the doors, damp p..
14mm Mesh Wing Corner Bead with Extended Arris is a 2500mm Corner Profile with Extended Arris and alkali resistant fibreglass mesh (100mm and 150mm) attached to 90 degrees PVC angle bead for 14mm render thickness designed for external corners, around window and door reveals within a thin coat render..
8-10mm White Angle Bead 2500mm is a versatile PVC corner bead profile for use on all external and internal rendering and plastering applications where a true, strong and sharp corner is required.
The PVC Angle Bead profile is designed for external corners, around window and door reveals within a ..
Internal Corner Profile for Cream White C07 Cedral Lap Cladding is an universal aluminium PPC trim that can be used to finish the corner where Cedral plank meets an internal corner creating a seal between the profile and the corner.
Cream White C07 Aluminium Internal Corner Trim is a 3000mm long ..
Aluminium Asymmetric Corner and Window Reveal Profile for Cream White C07 Cedral Lap Cladding is an universal aluminium system trim that can be used to secure external corners and for use on the uprights of windows and doors (surround and support of the window and door units).
Cream White C07 Win..
Length: 3000mm
Thickness: 0.9mm
Material: Aluminium (PPC)
External Corners - Window and Door Reveal applications
Cream White C07 Aluminium Internal Corner Profile for Cedral Click Cladding Board is an universal W-shape vertical system trim used to finish the corner where Cedral Weatherboard meets an internal corner forming a seal between the internal trim and the corner.
Aluminium Internal Corner Profile Cr..
Cream White C07 Symmetric Corner Profile for Cedral Lap Cladding is an universal non-corrosive PPC aluminium trim that can be used vertically on 90 degree external corners of a build where the planks are lapped either side of the corner and for stop profile applications.
Symmetric Corner Profile ..
13-15mm White Movement Bead and Expansion Joint Profile is a smart PVC trim designed to protect the render from cracking and to allow the top-coat to expand and contract in changing weather conditions and the building movements over the years.
PVC Movement beading and expansion joint profile can ..
13-22mm Ivory (Magnolia) External Bellcast Bead with Drip for Rendering is a strong PVC profile designed to protect the render against impact damage and water penetration in external wall insulation (EWI) systems.
EWI Bellcast beads with drip nose are designed to provide a stop to the render abov..
8-10mm Ivory (Magnolia) Angle Bead 2500mm is a special PVC corner bead trim for use on all external and internal rendering and plastering applications where a true, strong and sharp corner is required.
The PVC Angle Bead profile is designed for external corners, around window and door reveals wit..
Dark Grey C15 Asymmetric Corner and Window Reveal Profile for Cedral Lap Cladding is an universal aluminium trim that can be used to secure external corners and for use on the uprights of windows and doors (surround and support of the window and door units).
Window Reveal Asymmetric Corner Profil..
Length: 3000mm
Thickness: 0.9mm
Material: Aluminium (PPC)
External Corners - Window and Door Reveal applications
Dark Grey C15 Internal Corner Profile for Cedral Lap Cladding is a W-shape non-corrosive PPC aluminium trim that can be used to finish the corner where Cedral plank meets an internal corner creating a seal between the profile and the corner.
Aluminium Internal Corner Trim Dark Grey C15 is a 3000m..
Internal Corner Profile for Cedral Click Cladding Dark Grey C15 is a comprehensive non-corrosive aluminium W-shape vertical system trim that can be used to finish the corner where Cedral Weatherboard meets an internal corner forming a seal between the internal trim and the corner.
Dark Grey C15 A..
Dark Grey C15 Symmetric Corner Profile for Cedral Lap Cladding is a comprehensive non-corrosive PPC aluminium trim that can be used vertically on 90 degree external corners of a build where the planks are lapped either side of the corner and for stop profile applications.
Symmetric Corner Profile..
10-12mm White Angle Bead 2500mm is a versatile PVC corner bead profile for use on all external and internal rendering and plastering applications where a true, strong and sharp corner is required.
The PVC Angle Bead profile is designed for external corners, around window and door reveals within a..
13-15mm Ivory (Magnolia) Movement Bead and Expansion Joint Profile 2500mm is a special PVC trim designed to protect the render from cracking and to allow the top-coat to expand and contract in changing weather conditions and the building movements over the years.
PVC Movement beading and expansio..
Asymmetric Corner Window Reveal Profile for Slate Grey C18 Cedral Lap Cladding is an universal aluminium trim that can be used to secure external corners and for use on the uprights of windows and doors (surround and support of the window and door units).
Slate Grey C18 Window Reveal Asymmetric C..
Length: 3000mm
Thickness: 0.9mm
Material: Aluminium (PPC)
External Corners - Window and Door Reveal applications
Internal Corner Profile for Slate Grey C18 Cedral Lap Cladding is an uniersal aluminium trim used to finish the corner where Cedral plank meets an internal corner creating a seal between the profile and the corner.
Slate Grey C18 Aluminium Internal Corner Trim is a 3000mm long Cedral Lap Weather..
Internal Corner Aluminium Profile for Cedral Click Cladding Slate Grey C18 is an universal vertical system trim that can be used to finish the corner where Cedral Weatherboard meets an internal corner forming a seal between the internal trim and the corner.
Aluminium Internal Corner Profile is a ..
Slate Grey C18 Symmetric Corner Profile for Cedral Lap Cladding is a special aluminium system trim that can be used vertically on 90 degree external corners of a build where the planks are lapped either side of the corner and for stop profile applications.
Symmetric Corner Profile Slate Grey C18 ..
10-12mm Ivory (Magnolia) Angle Bead 2500mm is a versatile PVC corner bead profile for use on all external and internal rendering and plastering applications where a true, strong and sharp corner is required.
The PVC Angle Bead profile is designed for external corners, around window and door revea..
15-17mm White Movement Bead and Expansion Joint Profile is a smart PVC trim designed to protect the render from cracking and to allow the top-coat to expand and contract in changing weather conditions and the building movements over the years.
PVC Movement beading and expansion joint profile can ..
Black C50 Aluminium Asymmetric Corner and Window Reveal Profile for Cedral Lap Cladding is an universal aluminium PPC trim that can be used to secure external corners and for use on the uprights of windows and doors (surround and support of the window and door units).
Window Reveal Asymmetric Cor..
Length: 3000mm
Thickness: 0.9mm
Material: Aluminium (PPC)
External Corners - Window and Door Reveal applications
Internal Corner Profile for Cedral Click Cladding Black C50 is an universal aluminium W-shape vertical system trim that can be used to finish the corner where Cedral Weatherboard meets an internal corner forming a seal between the internal trim and the corner.
Black C50 Aluminium Internal Corner ..
Black C50 Internal Corner Profile for Cedral Lap Cladding is an universal aluminium system trim used to finish the corner where Cedral plank meets an internal corner creating a seal between the profile and the corner.
Aluminium Internal Corner Trim Black C50 is a 3000mm long Cedral Lap Weatherboa..
Black C50 Symmetric Corner Profile for Cedral Lap Cladding is an universal non-corrosive PPC aluminium trim that can be used vertically on 90 degree external corners of a build where the planks are lapped either side of the corner and for stop profile applications.
Symmetric Corner Profile Black ..
13-15mm White Angle Bead for Rendering is a 2500mm versatile PVC corner bead profile for use on all external and internal rendering and plastering applications where a true, strong and sharp corner is required.
The PVC Angle Bead White profile is designed for external corners, around window and d..
15-17mm Ivory (Magnolia) Movement Bead and Expansion Joint Profile is a smart PVC trim designed to protect the render from cracking and to allow the top-coat to expand and contract in changing weather conditions and the building movements over the years.
PVC Movement beading and expansion joint p..
Cedral Lap Asymmetric Corner Profile Silver Grey C51 is an universal aluminium trim that can be used to secure external corners and for use on the uprights of windows and doors (surround and support of the window and door units).
Silver Grey C51 Window Reveal Asymmetric Corner Profile is a diamon..
Length: 3000mm
Thickness: 0.9mm
Material: Aluminium (PPC)
External Corners - Window and Door Reveal applications
Internal Corner Profile for Silver Grey C51 Cedral Lap Cladding is an universal non-corrosive PPC aluminium trim that can be used to finish the corner where Cedral plank meets an internal corner creating a seal between the profile and the corner.
Silver Grey C51 Aluminium Internal Corner Trim is..
Internal Corner Aluminium Profile for Cedral Click Cladding Silver Grey C51 is a comprehensive non-corrosive W-shape vertical system trim that can be used to finish the corner where Cedral Weatherboard meets an internal corner forming a seal between the internal trim and the corner.
Silver Grey C..
Silver Grey C51 Symmetric Corner Profile for Cedral Lap Cladding is a comprehensive non-corrosive PPC aluminium trim that can be used vertically on 90 degree external corners of a build where the planks are lapped either side of the corner and for stop profile applications.
Symmetric Corner Profi..
13-15mm Ivory (Magnolia) Angle Bead 2500mm is a versatile PVC corner bead profile for use on all external and internal rendering and plastering applications where a true, strong and sharp corner is required.
The PVC Angle Bead profile is designed for external corners, around window and door revea..
20-22mm White Movement Bead and Expansion Joint Profile is a smart PVC trim designed to protect the render from cracking and to allow the top-coat to expand and contract in changing weather conditions and the building movements over the years.
PVC Movement beading and expansion joint profile can ..
Internal Corner Profile for Pewter C54 Cedral Lap Cladding is an universal aluminium system profile that can be used to finish the corner where Cedral plank meets an internal corner creating a seal between the profile and the corner.
Pewter C54 Aluminium Internal Corner Profile is a 3000mm long C..
Asymmetric Corner and Window Reveal Profile for Pewter C54 Cedral Click Cladding is a comprehensive PPC aluminium trim that can be used to secure external corners and for use on the uprights of windows and doors (surround and support of the window and door units).
Pewter C54 Window Reveal Asymme..
Length: 3000mm
Thickness: 0.9mm
Material: Aluminium (PPC)
External Corners - Window and Door Reveal applications
Internal Corner Profile for Cedral Click Cladding Pewter C54 is a comprehensive non-corrosive aluminium W-shape vertical system trim that can be used to finish the corner where Cedral Weatherboard meets an internal corner forming a seal between the internal trim and the corner.
Pewter C54 Alumini..
Pewter C54 Symmetric Corner Profile for Cedral Lap Cladding is a comprehensive non-corrosive PPC aluminium trim that can be used vertically on 90 degree external corners of a build where the planks are lapped either side of the corner and for stop profile applications.
Symmetric Corner Profile Pe..
15-17mm White Angle Bead 2500mm is a versatile PVC corner bead profile for use on all external and internal rendering and plastering applications where a true, strong and sharp corner is required.
The PVC Angle Bead profile is designed for external corners, around window and door reveals within a..
20-22mm Ivory (Magnolia) Movement Bead and Expansion Joint Profile 2500mm is a special PVC trim designed to protect the render from cracking and to allow the top-coat to expand and contract in changing weather conditions and the building movements over the years.
PVC Movement beading and expansio..
Cedral Lap Light Oak CL104 Asymmetric Corner and Window Reveal Profile is an universal aluminium cladding system trim that can be used to secure external corners and for use on the uprights of windows and doors (surround and support of the window and door units).
Window Reveal Asymmetric Corner P..
Length: 3000mm
Thickness: 0.9mm
Material: Aluminium (PPC)
External Corners - Window and Door Reveal applications
Internal Corner Profile for Light Oak CL104 Cedral Lap Cladding is an universal w-shape aluminium trim that can be used to finish the corner where Cedral plank meets an internal corner creating a seal between the profile and the corner.
Aluminium Internal Corner Trim is a 3000mm long Cedral Lap W..
Light Oak CL104 Symmetric Corner Profile for Cedral Lap Cladding is a comprehensive non-corrosive PPC aluminium trim that can be used vertically on 90 degree external corners of a build where the planks are lapped either side of the corner and for stop profile applications.
Symmetric Corner Profi..
15-17mm Ivory (Magnolia) Angle Bead 2500mm is a versatile PVC corner bead profile for use on all external and internal rendering and plastering applications where a true, strong and sharp corner is required.
The PVC Angle Bead profile is designed for external corners, around window and door revea..
Internal Corner Profile for Dark Oak CL105 Cedral Lap Cladding is an universal w-shape non-corrosive aluminium trim used to finish the corner where Cedral plank meets an internal corner creating a seal between the profile and the corner.
Dark Oak CL105 Aluminium Internal Corner Trim is a 3000mm l..
Asymmetric Corner and Window Reveal Profile for Cedral Lap Dark Oak CL105 Cladding is a comprehensive non-corrosive PPC aluminium trim that can be used to secure external corners and for use on the uprights of windows and doors (surround and support of the window and door units).
Dark Oak CL105 W..
Length: 3000mm
Thickness: 0.9mm
Material: Aluminium (PPC)
External Corners - Window and Door Reveal applications
Dark Oak CL105 Symmetric Corner Profile for Cedral Lap Cladding is a universal aluminium trim that can be used vertically on 90 degree external corners of a build where the planks are lapped either side of the corner and for stop profile applications.
Symmetric Corner Profile Dark Oak CL105 is a ..
20-23mm White Angle Bead 2500mm is a versatile PVC corner bead profile for use on all external and internal rendering and plastering applications where a true, strong and sharp corner is required.
The PVC Angle Bead profile is designed for external corners, around window and door reveals within a..
20-23mm Ivory (Magnolia) Angle Bead 2500mm is a versatile PVC corner bead profile for use on all external and internal rendering and plastering applications where a true, strong and sharp corner is required.
The PVC Angle Bead profile is designed for external corners, around window and door revea..