Largely manufactured from recycled glass (e.g. windscreens) and mineral base materials such as sand and without the use of binding agents. The ingredients are melted into molten glass, which is cooled and crushed into a fine powder. The powdered glass is poured into molds and heated (below the melting point) in a "sintering" process that causes the particles to adhere to one another. Next, a small amount of finely ground carbon-black is added and the material is heated in a "cellulation" process. Here, the carbon reacts with oxygen, creating carbon dioxide, which creates the insulating bubbles in the (material). CO2 accounts for more than 99% of the gas in the cellular spaces.
Cellulose insulation is a material made from recycled newspaper. The paper is shredded and inorganic salts, such as boric acid, are added for resistance to fire, mould, insects and vermin. The insulation is installed either blown or damp-sprayed depending on application.
Wood fibre
The success of wood fibre insulation derives from an attractive environmental profile combined with a whole bag of functions including rigid insulation, sheathing and sarking for timber frames, roofs and flooring as well as flexible insulation for studs and rafters.
Wood of course is renewable, it sequesters carbon during its growth and product production is relatively free from pollution. The insulation value of wood fibre boards is not as dimensionally efficient as some of the orthodox petro-chemical materials - but it's no slouch either - typically coming in with a 'k value' range of between 0.038-0.043 W/mK depending on format.
Hemp
Hemp fibres are produced from hemp straw of the hemp plant. Most hemp is imported, but an increasing amount of home-grown crop is becoming available. Hemp grows up to a height of nearly 4 metres within a period of 100-120 days. Because the plants shade the soil, no chemical protection or toxic additives are required for hemp cultivation. The product is composed of, usually, 85% hemp fibre with the ballance made up of polyester binding and 3-5% soda added for fire proofing.
Straw
Straw is an agricultural by-product, the dry stalks of cereal plants, after the grain and chaff have been removed. Straw makes up about half of the yield of cereal crops such asbarley, oats, rice, rye and wheat.
Fire accessories are used to limit fire spread through penetrations in a fire barrier. Fire stopping products include products that can strengthen and seal any joins and junctions between fire-resistance building materials. These fire materials include:
intumescent sealants
flexible intumescent gap seals
dynamic acrylic sealers
putty pads
Flexible fire foam solutions are ideal to firestop cable, pipe or mixed penetrations in small to medium-sized openings.
To create a comprehensive passive fire protection system, all gaps in walls, floors and ceilings need to be fire stopped to prevent the spread of flames, smoke and toxic gases. If the penetration is not properly sealed and protected with an appropriate firestop system, the fire barrier is rendered less effective, and fire will spread beyond the compartment of origin.
If the worst happens and a fire breaks out in your building, your due diligence will pay off when the fire is contained - people will have time to evacuate, and you will be back in business much sooner than if no protection was in place. Generally speaking fire stopping in commercial and industrial buildings can be achieved through sub-diving larger spaces into smaller rooms. The price of saving lives, property, and assets is incalculable. Life safety should be your No. 1 concern.
FIRE RATING CLASSIFICATION
Before you choose your product, it’s important to understand the classification process and what each level means in terms of fire resistance and protection.
The BS EN 13501-1 classification comprises three ratings.
CONTRIBUTION TO FIRE
The first is the main Euroclass rating, which will be the letter A1, A2, B, C, D, E or F.A1 is the highest level of performance, while F is the lowest.
Flooring materials are followed by the abbreviation ‘fl’ (for example, A1fl).
Linear pipe thermal insulation products are followed by the abbreviation ‘L’ (for example, A1L).
A1 products are classified as non-combustible. A2 products are classified as limited combustibility, and B to F are classified as combustible in ascending order.
SMOKE
The second classification relates to smoke emission during combustion. This is indicated by a rating of s1, s2 or s3, from highest to lowest performance. Smoke emission classifications are not provided for products with an E or F overall rating.
DROPLETS
The third classification relates to the level of production of flaming droplets/particles during combustion. This is indicated by a rating of d0, d1 or d2, from highest to lowest performance. E-rated products receive a d2 flaming droplet classification. F-rated products receive none. A1-rated products are not given smoke emission or flaming droplet ratings, on the assumption that they make no contribution to fire growth or spread. Occasionally, a building insulation product may focus on a Class 0 or Class 1 rating. However, these classifications do not indicate the combustibility of the product, referring only to limited surface fire performance characteristics. Class 0 is a rating defined in Approved Document B of the Building Regulations 1991. It combines two tests in the British Standard BS 476. The first assesses a surface’s contribution to fire propagation (BS 476-6) and the second assesses the spread of flames across a surface, including distance and time (BS 476-7). Class 1 is a limited classification based on the test in BS 476-7 only. It is important to recognise the limited application of these classifications.
FIRE ACCESORIES MANUFACTURERS | PRODUCTS
Fire accessories are manufactured by leading brands and are suitable for use in any project where additional fire proofing measures might need to be taken. In terms of fire accessories, Promat, Kemwell, British Gypsum, Rockwool, Vitcas and Knauf are the commonly recognised brands.
PROMAFOUR-HT JOINT-FILLER
1.5kg Promat PROMAFOUR-HT JOINT-FILLER is a greyish-yellow, ready to use filling and levelling compound made of refractory boards, mix of clay and an inorganic binder. It is especially developed for filling and levelling out PROMAFOUR construction boards for mantelpieces. Due to its consistency, PROMAFOUR-HT JOINT-FILLER can be easily caulked or troweled, depending on the application.
PROMAT PROMAFOUR GLUE-100
310ml Promat PROMAFOUR GLUE-1000 is a versatile non-combustible ready for use refractory silicate based glue which resists temperatures up to 1000 °C, used in construction of a PROMAFOUR mantelpiece and is the ideal solution for fireplaces. PROMAFOUR GLUE-1000 bonds permanently with glass fibre, mineral wool and calcium silicate as well as metal, stone or plasterboard – can also be used for bonding ropes and insulation materials.
PROMAT PROMAFOUR-PRIMER
3l Promat PROMAFOUR-PRIMER is a versatile non-combustible priming paint based on liquid calcium silicate and small quantities of organic additives designed for walls, wood and other materials. PROMAFOUR PRIMER bonds permanently with mineral substrates, is extremely water vapour permeable, highly resistant to weathering and fungal and mould growth. Used typically as a preparatory coating for PROMAFOUR mantelpiece before painting and finishing.
20mm Lamella Mat (45kg/m3) is manufactured from non-combustible mineral wool faced with aluminium foil used for heating pipe, ventilation pipe, duct work, air ducts and water or oil storage vessels.
HVAC Lamella Mat is manufactured with a density of 45kg/m3 with excellent fire performance, classi..
20mm Foil Faced Mineral Wool Roll (Density 45kg/m3) Lamella Mat A1
A1 class non-combustible mineral wool roll faced with aluminium foil
Used for heating and ventilation pipes, ducts and water/oil storage vessels
Acoustic, thermal and fire insulation (anti condensation and anti moisture)
Help to prevent condensation from forming on the pipes and ducts
20mm Lamella Mat (60kg/m3) is manufactured from non-combustible mineral wool faced with foil used for heating pipe, ventilation pipe, duct work, air ducts and water or oil storage vessels.
60kg Density Foil Backed Lamella Mat is a high performance insulation which provides acoustic, thermal and f..
20mm Foil Faced Mineral Wool Roll (Density 60kg/m3) Lamella Mat A1
A1 class non-combustible mineral wool roll faced with aluminium foil
Used for heating and ventilation pipes, ducts and water/oil storage vessels
Acoustic, thermal and fire insulation (anti condensation and anti moisture)
Help to prevent condensation from forming on the pipes and ducts
310ml Promat PROMAFOUR GLUE 1000 is a versatile non-combustible ready for use refractory silicate based glue which resists temperatures up to 1000 °C, used in construction of a PROMAFOUR mantelpiece and is the ideal solution for fireplaces.
PROMAFOUR GLUE-1000 bonds permanently with glass fibre, ..
Colour: White-Grey
Classification temperature 1000 °C
Hardening Between: 12 - 24 h
Fire-resistance: Non-combustible
Promat Glue-1000 is the ideal solution for fireplaces
3l Promat PROMAFOUR PRIMER is a versatile non-combustible priming paint based on liquid calcium silicate and small quantities of organic additives designed for walls, wood and other materials.
PROMAFOUR PRIMER bonds permanently with mineral substrates, is extremely water vapour permeable, highly ..
Colour: Milky
Classification temperature 1000 °C
Drying time: At least 12h
PROMAFOUR PRIMER bonds permanently
Excellent bonding on masonry and concrete surfaces
1.5kg Promat PROMAFOUR-HT JOINT-FILLER is a greyish-yellow, ready to use filling and levelling compound made of refractory boards, mix of clay and an inorganic binder for filling and levelling out PROMAFOUR construction boards for mantelpieces.
Due to its consistency, PROMAFOUR-HT JOINT-FILLER ca..
Colour - Beige
Classification temperature 1000 °C
Density 1700 kg/m3
Processing temperature > 10 °C
Excellent bonding on masonry and concrete surfaces
4mm Tenmat FF102/25 Fire Barrier is a high expansion intumescent seal used as a fire protection barrier designed to reinstate fire resistance performance within external wall cavities that require permanent ventilation.
In the event of a fire the FF102/25 Tenmat will expand to close the external ..
Tenmat FF102/25 Ventilated Cavity Fire Barrier for 25mm cavities
Provided in strips of 1000mm long by 35mm wide and 4mm thick
Fire Rated for up to 60 minutes for both integrity and insulation
High expansion intumescent seal used as a fire protection barrier
Lightweight - designed to be easily and quickly installed on site
25mm Foil Faced Mineral Wool (45kg/m3) Roll is an A1 class non-combustible mineral wool faced with aluminium foil used for heating and ventilation pipes, ductwork and water or oil storage vessels.
HVAC Lamella Mat is manufactured with a density of 45kg/m3 with excellent fire performance, classifi..
25mm Foil Faced Mineral Wool Roll (Density 45kg/m3) Lamella Mat A1
A1 class non-combustible mineral wool roll faced with aluminium foil
Used for heating and ventilation pipes, ducts and water/oil storage vessels
Acoustic, thermal and fire insulation (anti condensation and anti moisture)
Help to prevent condensation from forming on the pipes and ducts
25mm Foil Faced Mineral Wool (60kg/m3) Roll is an A1 class non-combustible mineral wool faced with foil used for heating and ventilation pipes, ductwork and water or oil storage vessels.
60kg Density Foil Backed Lamella Mat is a high performance insulation which provides acoustic, thermal and fir..
25mm Foil Faced Mineral Wool Roll (Density 60kg/m3) Lamella Mat A1
A1 class non-combustible mineral wool roll faced with aluminium foil
Used for heating and ventilation pipes, ducts and water/oil storage vessels
Acoustic, thermal and fire insulation (anti condensation and anti moisture)
Help to prevent condensation from forming on the pipes and ducts
6mm Tenmat FF102/50 Ventilated Cavity Fire Barrier is an ultimate fire protection barrier designed to reinstate fire resistance performance within external wall cavities that require permanent ventilation in non-fire conditions.
In the event of a fire the FF102/50 Tenmat will expand to close the ..
Tenmat FF102/50 Ventilated Cavity Fire Barrier for 50mm cavities
Provided in strips of 1000mm long by 75mm wide and 6mm thick
Fire Rated for up to 120 minutes for both integrity and insulation
High expansion intumescent seal used as a fire protection barrier
Lightweight - designed to be easily and quickly installed on site
30mm Foil Faced A1 Lamela Mat is a flexible fire, acoustic (45kg/m3) and thermal insulation solution used for heating pipe, ventilation pipe, duct work, air ducts and water or oil storage vessels.
HVAC Lamella Mat is manufactured with a density of 45kg/m3 with excellent fire performance, classifi..
30mm Foil Faced Mineral Wool Roll (Density 45kg/m3) Lamella Mat A1
A1 class non-combustible mineral wool roll faced with aluminium foil
Used for heating and ventilation pipes, ducts and water/oil storage vessels
Acoustic, thermal and fire insulation (anti condensation and anti moisture)
Help to prevent condensation from forming on the pipes and ducts
30mm Foil Faced A1 Lamela Mat is a flexible fire, acoustic (60kg/m3) and thermal insulation used for heating pipe, ventilation pipe, duct work, air ducts and water or oil storage vessels.
60kg Density Foil Backed Lamella Mat is a high performance insulation which provides acoustic, thermal and fi..
30mm Foil Faced Mineral Wool Roll (Density 60kg/m3) Lamella Mat A1
A1 class non-combustible mineral wool roll faced with aluminium foil
Used for heating and ventilation pipes, ducts and water/oil storage vessels
Acoustic, thermal and fire insulation (anti condensation and anti moisture)
Help to prevent condensation from forming on the pipes and ducts
35mm HVAC Mineral Wool Lamella Mat is used for heating and ventilation pipe or duct work and water/oil storage vessels, an A1 class non-combustible (45kg/m3) mineral wool faced with aluminium foil.
HVAC Lamella Mat is manufactured with a density of 45kg/m3 with excellent fire performance, classif..
35mm Foil Faced Mineral Wool Roll (Density 45kg/m3) Lamella Mat A1
A1 class non-combustible mineral wool roll faced with aluminium foil
Used for heating and ventilation pipes, ducts and water/oil storage vessels
Acoustic, thermal and fire insulation (anti condensation and anti moisture)
Help to prevent condensation from forming on the pipes and ducts
35mm HVAC Lamella Mat is used for heating and ventilation pipe or duct work and water/oil storage vessels, an A1 class non-combustible (60kg/m3) mineral wool faced with aluminium foil.
60kg Density Foil Backed Lamella Mat is a high performance insulation which provides acoustic, thermal and fire ..
35mm Foil Faced Mineral Wool Roll (Density 60kg/m3) Lamella Mat A1
A1 class non-combustible mineral wool roll faced with aluminium foil
Used for heating and ventilation pipes, ducts and water/oil storage vessels
Acoustic, thermal and fire insulation (anti condensation and anti moisture)
Help to prevent condensation from forming on the pipes and ducts
40mm Duct Wrap Foil Backed 45kg/m3 Roll is a fire, acoustic and thermal HVAC solution, an A1 class roll used for heating pipe, ventilation pipe, duct work, air ducts and water or oil storage vessels.
HVAC Lamella Mat is manufactured with a density of 45kg/m3 with excellent fire performance, class..
40mm Foil Faced Mineral Wool Roll (Density 45kg/m3) Lamella Mat A1
A1 class non-combustible mineral wool roll faced with aluminium foil
Used for heating and ventilation pipes, ducts and water/oil storage vessels
Acoustic, thermal and fire insulation (anti condensation and anti moisture)
Help to prevent condensation from forming on the pipes and ducts
40mm Duct Wrap Foil Backed 60kg/m3 Roll is a fire, acoustic and thermal HVAC solution, an A1 class roll used for heating and ventilation pipes, ducts and water or oil storage vessels.
60kg Density Foil Backed Lamella Mat is a high performance insulation which provides acoustic, thermal and fire p..
40mm Foil Faced Mineral Wool Roll (Density 60kg/m3) Lamella Mat A1
A1 class non-combustible mineral wool roll faced with aluminium foil
Used for heating and ventilation pipes, ducts and water/oil storage vessels
Acoustic, thermal and fire insulation (anti condensation and anti moisture)
Help to prevent condensation from forming on the pipes and ducts
45mm Duct Work Lamella Roll is made from non-combustible class A1 mineral wool (45kg/m3) faced with foil used for heating pipe, ventilation pipe, duct work, air ducts and water or oil storage vessels.
HVAC Lamella Mat is manufactured with a density of 45kg/m3 with excellent fire performance, clas..
45mm Foil Faced Mineral Wool Roll (Density 45kg/m3) Lamella Mat A1
A1 class non-combustible mineral wool roll faced with aluminium foil
Used for heating and ventilation pipes, ducts and water/oil storage vessels
Acoustic, thermal and fire insulation (anti condensation and anti moisture)
Help to prevent condensation from forming on the pipes and ducts
45mm Duct Work Lamella Roll is made from non-combustible class A1 mineral wool (60kg/m3) faced with foil used for heating and ventilation pipes, duct work, and water/oil storage vessels.
60kg Density Foil Backed Lamella Mat is a high performance insulation which provides acoustic, thermal and fir..
45mm Foil Faced Mineral Wool Roll (Density 60kg/m3) Lamella Mat A1
A1 class non-combustible mineral wool roll faced with aluminium foil
Used for heating and ventilation pipes, ducts and water/oil storage vessels
Acoustic, thermal and fire insulation (anti condensation and anti moisture)
Help to prevent condensation from forming on the pipes and ducts
50mm Duct and Pipe Wrap (45kg/m3) Roll is a reinforced aluminium foil faced mineral wool non-combustible class A1 roll used for heating and ventilation pipe or duct work and liquid storage vessels.
HVAC Lamella Mat is manufactured with a density of 45kg/m3 with excellent fire performance, classif..
50mm Foil Faced Mineral Wool Roll (Density 45kg/m3) Lamella Mat A1
A1 class non-combustible mineral wool roll faced with aluminium foil
Used for heating and ventilation pipes, ducts and water/oil storage vessels
Acoustic, thermal and fire insulation (anti condensation and anti moisture)
Help to prevent condensation from forming on the pipes and ducts
50mm Duct and Pipe Wrap (60kg/m3) Roll is a reinforced foil faced mineral wool non-combustible class A1 roll used for heating and ventilation pipe or duct work and liquid storage vessels.
60kg Density Foil Backed Lamella Mat is a high performance insulation which provides acoustic, thermal and fi..
50mm Foil Faced Mineral Wool Roll (Density 60kg/m3) Lamella Mat A1
A1 class non-combustible mineral wool roll faced with aluminium foil
Used for heating and ventilation pipes, ducts and water/oil storage vessels
Acoustic, thermal and fire insulation (anti condensation and anti moisture)
Help to prevent condensation from forming on the pipes and ducts
55mm Fire Rated Lamella (45kg/m3) Roll, a duct wrap foil faced class A1 non-combustible mineral wool roll used for heating pipe, ventilation pipe, duct work, air ducts and water or oil storage vessels.
HVAC Lamella Mat is manufactured with a density of 45kg/m3 with excellent fire performance, cla..
55mm Foil Faced Mineral Wool Roll (Density 45kg/m3) Lamella Mat A1
A1 class non-combustible mineral wool roll faced with aluminium foil
Used for heating and ventilation pipes, ducts and water/oil storage vessels
Acoustic, thermal and fire insulation (anti condensation and anti moisture)
Help to prevent condensation from forming on the pipes and ducts
55mm Fire Rated Lamella (60kg/m3) Roll is a duct wrap foil faced class A1 non-combustible mineral wool roll used for heating and ventilation pipes, ducts, and water/oil storage vessels.
60kg Density Foil Backed Lamella Mat is a high performance insulation which provides acoustic, thermal and fire..
55mm Foil Faced Mineral Wool Roll (Density 60kg/m3) Lamella Mat A1
A1 class non-combustible mineral wool roll faced with aluminium foil
Used for heating and ventilation pipes, ducts and water/oil storage vessels
Acoustic, thermal and fire insulation (anti condensation and anti moisture)
Help to prevent condensation from forming on the pipes and ducts
60mm Class A1 Lamella Roll 45kg/m3, a mineral wool roll with a reinforced aluminium foil facing designed for heating pipe, ventilation pipe, duct work, air ducts and water or oil storage vessels.
HVAC Lamella Mat is manufactured with a density of 45kg/m3 with excellent fire performance, classifie..
60mm Foil Faced Mineral Wool Roll (Density 45kg/m3) Lamella Mat A1
A1 class non-combustible mineral wool roll faced with aluminium foil
Used for heating and ventilation pipes, ducts and water/oil storage vessels
Acoustic, thermal and fire insulation (anti condensation and anti moisture)
Help to prevent condensation from forming on the pipes and ducts
60mm Class A1 Lamella Roll (60kg/m3) is an insulation roll with a reinforced foil facing designed for heating pipe, ventilation pipe, duct work, air ducts and water or oil storage vessels.
60kg Density Foil Backed Lamella Mat is a high performance insulation which provides acoustic, thermal and f..
60mm Foil Faced Mineral Wool Roll (Density 60kg/m3) Lamella Mat A1
A1 class non-combustible mineral wool roll faced with aluminium foil
Used for heating and ventilation pipes, ducts and water/oil storage vessels
Acoustic, thermal and fire insulation (anti condensation and anti moisture)
Help to prevent condensation from forming on the pipes and ducts
65mm 45kg/m3 Lamella Mat A1 is a fire, thermal and condensation insulation roll, made from non-combustible class A1 mineral wool faced with reinforced foil used for pipes, ductwork and storage vessels.
HVAC Lamella Mat is manufactured with a density of 45kg/m3 with excellent fire performance, cla..
65mm Foil Faced Mineral Wool Roll (Density 45kg/m3) Lamella Mat A1
A1 class non-combustible mineral wool roll faced with aluminium foil
Used for heating and ventilation pipes, ducts and water/oil storage vessels
Acoustic, thermal and fire insulation (anti condensation and anti moisture)
Help to prevent condensation from forming on the pipes and ducts
65mm 60kg/m3 Lamella Mat Class A1 is a fire, thermal and condensation insulation roll, made from non-combustible class A1 mineral wool faced with foil used for pipes, ducts and vessels.
60kg Density Foil Backed Lamella Mat is a high performance insulation which provides acoustic, thermal and fire..
65mm Foil Faced Mineral Wool Roll (Density 60kg/m3) Lamella Mat A1
A1 class non-combustible mineral wool roll faced with aluminium foil
Used for heating and ventilation pipes, ducts and water/oil storage vessels
Acoustic, thermal and fire insulation (anti condensation and anti moisture)
Help to prevent condensation from forming on the pipes and ducts
70mm Mineral Wool Roll (45kg/m3) for Duct Work is used as a fire, thermal and condensation insulation solution for heating pipe, ventilation pipe, duct work, air ducts and water or oil storage vessels.
HVAC Lamella Mat is manufactured with a density of 45kg/m3 with excellent fire performance, cla..
70mm Foil Faced Mineral Wool Roll (Density 45kg/m3) Lamella Mat A1
A1 class non-combustible mineral wool roll faced with aluminium foil
Used for heating and ventilation pipes, ducts and water/oil storage vessels
Acoustic, thermal and fire insulation (anti condensation and anti moisture)
Help to prevent condensation from forming on the pipes and ducts
70mm Mineral Wool Class A1 Roll (60kg/m3) for Duct Work is used as a fire, thermal and condensation insulation for heating and ventilation pipes, air ducts and water or oil storage vessels.
60kg Density Foil Backed Lamella Mat is a high performance insulation which provides acoustic, thermal and ..
70mm Foil Faced Mineral Wool Roll (Density 60kg/m3) Lamella Mat A1
A1 class non-combustible mineral wool roll faced with aluminium foil
Used for heating and ventilation pipes, ducts and water/oil storage vessels
Acoustic, thermal and fire insulation (anti condensation and anti moisture)
Help to prevent condensation from forming on the pipes and ducts
75mm Class A1 Foil Faced (45kg/m3) Roll is a non-combustible mineral wool roll faced with reinforced aluminium foil used for heating and ventilation pipes, ductwork and water or oil storage vessels.
HVAC Lamella Mat is manufactured with a density of 45kg/m3 with excellent fire performance, classi..
75mm Foil Faced Mineral Wool Roll (Density 45kg/m3) Lamella Mat A1
A1 class non-combustible mineral wool roll faced with aluminium foil
Used for heating and ventilation pipes, ducts and water/oil storage vessels
Acoustic, thermal and fire insulation (anti condensation and anti moisture)
Help to prevent condensation from forming on the pipes and ducts
75mm Class A1 Foil Faced (60kg/m3) Roll, a non-combustible mineral wool faced with aluminium foil used mainly for heating and ventilation pipes, ductwork and water or oil storage vessels.
60kg Density Foil Backed Lamella Mat is a high performance insulation which provides acoustic, thermal and fi..
75mm Foil Faced Mineral Wool Roll (Density 60kg/m3) Lamella Mat A1
A1 class non-combustible mineral wool roll faced with aluminium foil
Used for heating and ventilation pipes, ducts and water/oil storage vessels
Acoustic, thermal and fire insulation (anti condensation and anti moisture)
Help to prevent condensation from forming on the pipes and ducts
80mm Mineral Wool A1 (45kg/m3) Lamella Mat, a HVAC foil backed non-combustible roll used for heating pipe, ventilation pipe, duct work, air ducts, air conditioning and water or oil storage vessels.
HVAC Lamella Mat is manufactured with a density of 45kg/m3 with excellent fire performance, classif..
80mm Foil Faced Mineral Wool Roll (Density 45kg/m3) Lamella Mat A1
A1 class non-combustible mineral wool roll faced with aluminium foil
Used for heating and ventilation pipes, ducts and water/oil storage vessels
Acoustic, thermal and fire insulation (anti condensation and anti moisture)
Help to prevent condensation from forming on the pipes and ducts
80mm Mineral Wool Class A1 (60kg/m3) Lamella Mat, a HVAC foil backed non-combustible insulation roll used for heating and ventilation pipes, ducts, air conditioning and storage vessels.
60kg Density Foil Backed Lamella Mat is a high performance insulation which provides acoustic, thermal and fire..
80mm Foil Faced Mineral Wool Roll (Density 60kg/m3) Lamella Mat A1
A1 class non-combustible mineral wool roll faced with aluminium foil
Used for heating and ventilation pipes, ducts and water/oil storage vessels
Acoustic, thermal and fire insulation (anti condensation and anti moisture)
Help to prevent condensation from forming on the pipes and ducts
90mm Foil Faced Roll, a 45kg/m3 density, class A1 non-combustible mineral wool mat with reinforced aluminium foil facing on one side used mainly for HVAC (heating, ventilation, and air conditioning).
HVAC Lamella Mat is manufactured with a density of 45kg/m3 with excellent fire performance, class..
90mm Foil Faced Mineral Wool Roll (Density 45kg/m3) Lamella Mat A1
A1 class non-combustible mineral wool roll faced with aluminium foil
Used for heating and ventilation pipes, ducts and water/oil storage vessels
Acoustic, thermal and fire insulation (anti condensation and anti moisture)
Help to prevent condensation from forming on the pipes and ducts
90mm Foil Faced Lamella Roll, a 60kg/m3 density, class A1 non-combustible insulation roll with reinforced foil facing on one side used for HVAC (heating, ventilation, and air conditioning).
60kg Density Foil Backed Lamella Mat is a high performance insulation which provides acoustic, thermal and ..
90mm Foil Faced Mineral Wool Roll (Density 60kg/m3) Lamella Mat A1
A1 class non-combustible mineral wool roll faced with aluminium foil
Used for heating and ventilation pipes, ducts and water/oil storage vessels
Acoustic, thermal and fire insulation (anti condensation and anti moisture)
Help to prevent condensation from forming on the pipes and ducts
100mm 45kg/m3 Mineral Wool Foil Faced Duct Roll, a non-combustible class A1 lamella mat backed with reinforced aluminium foil used for HVAC (heating, ventilation, and air conditioning).
HVAC Lamella Mat is manufactured with a density of 45kg/m3 with excellent fire performance, classified as Class..
100mm Foil Faced Mineral Wool Roll (Density 45kg/m3) Lamella Mat A1
A1 class non-combustible mineral wool roll faced with aluminium foil
Used for heating and ventilation pipes, ducts and water/oil storage vessels
Acoustic, thermal and fire insulation (anti condensation and anti moisture)
Help to prevent condensation from forming on the pipes and ducts
100mm 60kg/m3 Mineral Wool Foil Faced Roll, a non-combustible class A1 mineral wool roll backed with reinforced aluminium foil used for HVAC (heating, ventilation, and air conditioning).
60kg Density Foil Backed Lamella Mat is a high performance insulation which provides acoustic, thermal and fir..
100mm Foil Faced Mineral Wool Roll (Density 60kg/m3) Lamella Mat A1
A1 class non-combustible mineral wool roll faced with aluminium foil
Used for heating and ventilation pipes, ducts and water/oil storage vessels
Acoustic, thermal and fire insulation (anti condensation and anti moisture)
Help to prevent condensation from forming on the pipes and ducts