Menu
Your Cart

Tenmat Ventilated Cavity Fire Barrier FF102/50 (50mm cavities)

Tenmat Ventilated Cavity Fire Barrier FF102/50 (50mm cavities)
  • Tenmat FF102/50 Ventilated Cavity Fire Barrier for 50mm cavities
  • Provided in strips of 1000mm long by 75mm wide and 6mm thick
  • Fire Rated for up to 120 minutes for both integrity and insulation
  • High expansion intumescent seal used as a fire protection barrier
  • Lightweight - designed to be easily and quickly installed on site
Estimated delivery:
In Stock
£ 37.50
Ex VAT: £ 31.25
  • Brand: Tenmat
  • Model: Tenmat FF102/50 for 50mm Cavities
  • Weight: 0.88kg
  • Dimensions: 1,000mm x 75mm x 6mm
  • SKU: for 50mm cavities
  • Product code: P1-2762
  • MPN: Tenmat FF102/50 for 50mm Cavities

Options available

6mm Tenmat FF102/50 Ventilated Cavity Fire Barrier is an ultimate fire protection barrier designed to reinstate fire resistance performance within external wall cavities that require permanent ventilation in non-fire conditions.

In the event of a fire the FF102/50 Tenmat will expand to close the external wall cavity, providing effective fire resistance, for integrity and insulation for up to 120 minutes depending upon the construction of the walls.

FF102/50 Tenmat Cavity Fire Barrier is manufactured from a rigid intumescent material allowing it to be provided in a strip format, it is also covered with a protective layer of aluminium foil for ease of handling.

The FF102/50 is designed for use within cavities of up to 50mm and once installed will close the remaining free air gap in front of the 6mm cavity barrier of up to a maximum of 44mm (depending on construction type). 

Tenmat Ventilated Cavity Fire Barrier is used in 50mm wide cavities in combustible and non-combustible constructions including brick, block, masonry, timber frame, timber batten and aerated concrete block.

This product comes in strips of 1000mm long, 75mm wide and 6mm thick, providing up to 120 minutes for both integrity and insulation when tested to the general principles of BS EN 1363-1 following ASFP TGD 19 guidance.

The Ventilated Cavity Fire Barrier can be mechanically fixed horizontally within ventilated cavities behind rainscreen or cladding systems to act as a cavity fire barrier.

Tenmat FF102/50 is a versatile system to be specified with confidence and provide the installer with a simple, time saving and site friendly solution.

 

Specification:

 

Thickness: 6mm

Length: 1000mm

Width: 75mm

Colour: Silver

Finish: Aluminium Foil

Cavity width: 50mm

 

Tenmat FF102/50 Ventilated Cavity Fire Barrier Features:

 · Ultimate fire protection barrier.

 · Providing effective fire resistance.

 · No maintenance required after installation.

 · Covered with a protective layer of aluminium foil.

 · Suitable for 'open-state' ventilated cavities up to 50mm wide.

 · Provided in strips of 1000mm long, 75mm wide and 6mm thick.

 · Lightweight - designed to be easily and quickly installed.

 · An 'open state' cavity fire barrier for use horizontally within uninsulated, ventilated and drained cavities.

 · Ventilated design – developed to allow maximum ventilation and drainage of cavities reducing the need for cavity trays or weep holes.

 · Can be used in a wide range of constructions including brick, block, masonry, timber frame, timber batten and aerated concrete block.

 · Fire Rated for up to 120 minutes for both integrity and insulation when tested to the general principles of BS EN 1363-1 following ASFP TGD 19 guidance.

 

*Further information may be found in our Downloads section.

Fairly easy access to all PDF files.

Datasheet ǀ Declaration of Performance - DoP ǀ BBA Certificate ǀ Installation Guide ǀ Certificates ǀ Brochure ǀ SPEC Sheet

specification
Cavity width Ventilated cavities up to 50mm wide
Colour Silver
Covarage One Linear Meter per one Length
Length 1000mm
lmetres 1.00
Material Rigid intumescent material
Profile Rectangle
Size 6mm x 75mm x 1000mm
Storage Dry, ambient
Thickness 6mm
Width 75mm
Building Regulations Satisfies Building Regulations
Coverage One Linear Meter per one Length
Finish Protective layer of Aluminium Foil
Durability 60 years
Shipping method Courier
Applications Ventilated Cavities behind Rainscreen or Cladding Systems
Service Temperature -20°C to +70°C
Type Passive Fire Protection - Cavity Barrier
Fixing method Stainless steel countersunk head screws
Expansion zone 26:1 Ratio
Foil faced Both sides
ETA Notification Yes
Features Fire Rated for up to 120 minutes
Manufacturer Tenmat®

Write a review

Note: HTML is not translated!
Bad Good

We deliver insulation materials to Mainland UK only. Deliveries to Highlands, Northern Ireland, Isle of Wight etc.. might be possible at additional cost.
We offer free delivery on most of the orders above £300 (excluding VAT) (except special products - shipping cost via courier - products marked ''Request A Quote'')

Delivery of some insulation materials might be extended due to the current situation (Covid-19, stock shortages, allocations).
If you need materials quickly please contact us - we will do our best to help you source materials needed.

We do not deliver on weekends and bank holidays. Sometimes we can deliver on Saturdays - please check with us before placing the order.
If you need any further information please contact us tel. 02081910776

We can help to calculate price per m2 or linear meter (one meter in length) cost, please just contact us via phone 02081910776, email or live chat. Alternatively, you can work it out yourself quickly and easily: to get cost per meter square please divide price shown in orange area by ''Required area (m2)'' Example price of £28.80 divided by board coverage 2.88m2 = cost of £10.00 per m2.

INSTALLERS

No matter whether you choose a local installer or a national company, there’s a few tips to help you find the right installer for your home insulation improvements, such as asking for recommendations and making sure that they’re part of a certification scheme. This makes sure that they have the right skills and standards of workmanship to carry out the installation, and you can be sure that they know exactly what they are doing.

4 TIPS FOR CHOOSING THE BEST INSULATION INSTALLER

1. Thermal inspection picture in portfolio

It’s worth seeing a installer’s previous work. There’s no harm asking if you can see any properties nearby that they’ve installed insulation in. Best way would be to see Infrared Thermal Imaging Inspections. Thermal cameras spot small, but key changes in temperature in different areas of a house, identifying problematic areas that the human eye never could and some that a visual inspection could only hypothesize.

2. Reviews

Along with checking recommendations and previous work, finding reviews online can often be a great way to find out if they provide a good service or not. However, it’s best not to solely rely on reviews you may find or review websites, as there’s no controlling who writes them.

3. Compare prices

Comparing prices will also ensure companies can’t take advantage of you and give you a fair price. 

4. Word of Mouth

The best way to find a great insulation installer is through recommendations. Make sure you ask friends and family. They will most likely give you their honest opinion and can tell you from first hand experience.

 

Whether you require a wall, cladding, external wall, loft or floor insulation fitted, you can find and hire your local insulation installers from popular UK web pages. A simple internet search will return thousands of potential installers near your area.

 

https://www.nia-uk.org/find-an-installer/

https://www.checkatrade.com/

https://www.mybuilder.com/

https://www.ratedpeople.com/local-thermal-insulation

 

STOCKIST

We are the stockist of construction materials and related products for both trade and DIY from most recognizable brands in the UK like Cordek, RCM, Promat, Rockwool, Isover, Celotex, Xtratherm, Ursa, Low-E, Cedral, Kingspan, Dufaylite, British Gypsum, K-rend, Ecotherm, Iko enertherm, Kay-Metzeler, Terrawool to allow you to complete your insulation job on time at competitive prices and the highest standards.

 

Whether you are a large company or a DIYer, if you need a large amount of insulation materials, we can offer quantity discounts at the best prices. Please contact us and our friendly customer service will try to find the best and cheapest solutions for you. We value your time and we will try to deliver the products as soon as possible at a reasonable price to your construction site or house. The UK's leading insulation supplier near you and your needs. Price List available upon request.
Tenmat Ventilated Cavity Fire Barrier FF102/50 (50mm cavities)
Tenmat Ventilated Cavity Fire Barrier FF102/50 (50mm cavities)
£ 37.50