BASF Styrodur® 3000 XPS 120mm is a waterproof and compression resistant XPS foam insulation board used in commercial, industrial and cold storage areas like floors, underground constructions, basements, swimming pools, flat and pitched roofs.

Extruded Polystyrene (XPS) differs from Expanded Polystyrene (EPS), XPS closed-cell structure prevents moisture-absorption and results in very low lambda values and impressive compressive loading capabilities.

Styrodur is the XPS with the most officially approved uses that offers the most flexible XPS portfolio for meeting virtually any thermal or practical requirement in construction, from floors all the way to flat roofs.

Extruded Polystyrene (XPS) Styrodur is dimensionally stable, resistant to decay, and low water absorption, this versatile insulation is especially well-suited for implementing perimeter insulation.

Thanks to its high compressive strength of 300kPa, Styrodur from BASF is the best choice for all applications that involve pressure (Technology “made in Germany”). 

This next generation extruded polystyrene is the preferred XPS for those who are environmentally aware, Styrodur is ODP chemical free as its cells are filled with air.

Styrodur® 3000CS has been the first choice of architects and engineers for protecting buildings from extremes of temperature and from moisture.

BASF XPS Styrodur conforms to building standards and regulations all over Europe and fulfills the demands of different weather conditions.

120mm Styrodur® XPS 100mm comes in 1265mm long by 615mm wide sheets.

Specification:

Thickness: 120mm

Length: 1265mm

Width: 615mm

Size: 120mm x 615mm x 1265mm

Board coverage: 0.78m2

Pack coverage: 2.34m2 (3 sheets)

Density: 32kg/m3

Weight: 8.88kg

Thermal Conductivity: 0.033 W/mk

R-Value: 3.60m2K/W

Commpressive Strength: 300kPa

Edge profile: Ship-lap

Surface: Smooth

Tensile strength: TR200(kPa)

Water vapour permeability: 150(µ)

Styrodur® 3000CS XPS Insulation Board Features:

 · Extremely durable.

 · Excellent insulation properties.

 · Low water absorption.

 · Resistance to aging and decay.

 · Simple and practical

 · Easy to cut and handle.

 · Lightweight foam sheets.

 · Technology “made in Germany”.

 · Raises the value of the structure.

 · Environmentally friendly.

 · Free from harmful blowing agents.

 · Excellent insulation thermal performance.

 · Protects the building construction.

 · Increases the lifespan of the building.

 · High compressive strength (300kPa).

 · Long-lasting solution (if correctly installed).

 · Can be installed in all weather conditions.

 · Reduction of energy costs for heating and cooling.

 · No dust hazardous to health during mechanical processing.

 · Fulfils all structural-physical and building construction requirements.

 · Quick amortisation of the insulation investment with rising energy costs.

XPS Styrodur 3000 CS Extruded Polystyrene Applications:

 · Car parks.

 · Ports and docks.

 · Civil engineering.

 · Solid flooring.

 · Foundation applications.

 · Industrial floors.

 · Airports and runways.

 · Roads and motorways.

 · Large void fill.

 · Commercial and domestic flooring insulation.

 · Inverted roofing systems.

 · Cold stores and chilled storage facilities.

 · Flat or zero pitched roofs.

 · External wall insulation systems below DPC level.

 · Below ground to insulate the floors and walls.

 · Landscaping and groundworks.

*Further information may be found in our Downloads section.

Fairly easy to access to all PDF files.

Datasheet ǀ Declaration of Performance - DoP ǀ BBA Certificate ǀ Installation Guide ǀ Certificates ǀ Brochure ǀ SPEC Sheet ǀ