32.5mm Ultra Liner Insulated Plasterboard is a high-performance PIR rigid insulation board bonded to 12.5mm tapered edge plasterboard used for walls, ceiling and pitched roof applications.

This ultimate thermal laminate insulation board provides high levels of insulation and drylining in one application for both newbuild and refurbishment projects.

Ultra Liner Insulated Plasterboard PIR insulation core has a thermal conductivity (lambda) of 0.022W/mK which can help improve U-values in certain constructions.

The rigid polyisocyanurate (PIR) insulation core is faced with kraft foil paper that is suitable to accept drywall adhesive but can be mechanically fixed as well.

Ultra Liner Insulated Plasterboards are designed to save money and time by reducing the heat loss from building in roof and wall applications.

The composite kraft foil paper facing on both sides of the ultra liner laminated board incorporates an integral vapour control layer.

Integral vapour control layer build in board helps to reduce the risk of condensation and improve thermal performance of the laminate board.

Ultra Liner Boards can be used as an alternative to Celotex PL4000, Quinn Therm Laminate, XT/TL Thermal Liner, Gyproc Thermaline and Knauf Laminates.

This insulated plasterboard can be readily cut using a sharp knife or fine toothed saw.

Appropriate PPE should be worn when handling Ultraliner Insulated Plasterboard.

Specification:

Thickness: 32.5mm

Length: 2400mm

Width: 1200mm

Board coverage: 2.88m2

R-Value:  1.07 m2K/W

Thermal Conductivity: 0.022 W/mk

Density (Foam Core): 30-32 Kg/m3

Compressive Strength: >120 kPa

Water Vapour Resistivity: >100 MNs/gm

Reaction to Fire: Euroclass B s1 d0

Ultra Liner PIR Insulated Plasterboard Features:

 · Saves money and time.

 · Reduced insulation thickness.

 · Reduce the risk of condensation.

 · Suitable for a variety of wall types.

 · Cost effective 3 in 1 solution.

 · Suitable for refurbishment and new build.

 · Easy to install and decorate.

 · Effective thermal insulation and drylining.

 · Insulation and drylining in one easy applicable board.

 · Provides an effective Vapour Control Layer (VCL).

 · Thermal conductivity (PIR core lambda) 0.022 W/mK.

Ultraliner PIR Insulated Plasterboard Installation Guidelines:

 · Ensure the wall is dry and free from any protrusions / wall paper etc.

 · Mark the position of Ultra Liner Insulated Plasterboard on the wall.

 · Setting out and planning board positioning is essential.

 · Apply adhesive dabs to the wall in accordance with BS8212.

 · Ensure a 50mm continuous ribbon of adhesive is created at the top and bottom of each board and around all openings.

 · Follow adhesive manufacturer’s guidelines.

 · General recommendation is to apply vertical dabs at 300mm centres, 25mm in from the edge.

 · Dabs should be 50-75mm wide and approximately 25mm deep to allow for tamping.

 · Total contact with the board area should be minimum 20%.

 · Maximum height installation for this system is 3000mm.

 · Lift the Ultra Liner Insulated Plasterboard into position using wedges on the floor.

 · Align Insulated Plasterboard squarely on wall.

 · Apply pressure to the board to level and embed it into the adhesive.

 · Allow a 15mm expansion joint at the top and bottom of the panel, and fill with foam filler.

 · Insulation should be cut back to accommodate an adjoining panel at external corners.

 · Joints should be tightly butted.

 · When the adhesive has dried, 3 mechanical fixings (thermally broken) should be fixed through the centre of the board.

 · Seal and tape the joints of Ultra Liner Insulated Plasterboard to ensure a continuous vapour control layer is created.

 · Plaster skim Ultra Liner Insulated Plasterboard to finish.

 · When upgrading existing properties, a professional should be engaged to assess the property for appropriate insulation treatments and effective detailing.

 · Walls should be dry and decoration stripped back to the wall substrate.

 · Appropriate ventilation strategies must be considered as part of the overall energy upgrade.

*Further information may be found in our Downloads section.

Fairly easy access to all PDF files.

Datasheet ǀ Declaration of Performance - DoP ǀ BBA Certificate ǀ Installation Guide ǀ Certificates ǀ Brochure ǀ SPEC Sheets

*Special Product - Non returnable cancelable.