- Brand: Novia®
- Model: VC2 AVCL 75m2
- Dimensions: 50,000mm x 1,500mm x 0mm
- SKU: VC2
- Product code: P1-1225
- MPN: Novia VC2 AVCL 75m2
Novia VC2 is an innovative, flame resistant, scrim reinforced and airtight vapour check membrane for use in insulated walls, floors and roofs.
Air Leakage and Vapour Control Layer is a extra tough material providing good tensile and nail tear strength.
It is lightweight and easy to handle and install translucent flame resistant to EN 13501-1 material.
Novia VC2 improves the insulation performance and minimizes interstitial condensation risk.
This high-performance, economical solution helps buildings meet the requirements of BS 5250.
The flame resistant additives mean that the membrane will not readily ignite or continue to burn in small fires, which adds an extra level of safety to building designs.
To provide an airtight seal, it must be installed in conjunction with the Novia two-tape sealing system.
The product is CE-approved and CPR compliant.
Air-leak barrier and vapour control layer (AVCL)
CE approved and CPR compliant
Complies with BS EN 13984
Easy to install, can see battens (translucent)
Tough, tear-resistant (scrim reinforced)
Minimizes interstitial condensation
Improves the insulation performance
High quality, low cost solution
Flame resistant to EN 13501-1, class E
Helps buildings meet the requirements of BS 5250
Install with Novia two tape sealing system
Ideal for use with Novia Breather Membranes in insulated frame applications
All Novia VCL products should be 100% fully sealed to the structure using a Novia double-sided butyl tape and one of the foil or BOPP lap tapes. The wider the tape used, the stronger
the final seal will be and the easier it will be to install.
Novia recommends the 30mm wide butyl tape and 60mm metallized BOPP tape for all standard VCL installations.
To BS EN 13984; CE approved and CPR compliant
Purpose: Reinforced and airtight vapour check membrane
Tear resistance: MD/CD: 215/195 N
Elongation to break: (MD/CD): 27/21%
Water vapour resistance (minimum): 10-30 MNs/g
Fire performance: Class E
Weight (minimum): 116 gsm
Width (minimum): 1.5 m
Roll length (minimum): 50 m
Roll weight: 9 kg
Nominal weight: 116 g/m²
Tensile strength MD: 345 N/50 mm
Tensile strength CD: 320 N/50 mm
Water vapour permeability in SD: 2-6 m
Water permeability after ageing: Pass
Resistance to water penetration: W1 class
Temperature resistance: -40– +80°C
Novia VC2 Air Leakage and Vapour Control Layer VCL – FULL SET – COMPLETE DIY KIT – CLICK HERE >
*Further information may be found in our Downloads section.
Fairly easy access to all PDF files.
Datasheet ǀ Declaration of Performance - DoP ǀ BBA Certificate ǀ Installation Guide ǀ Certificates ǀ Brochure ǀ SPEC Sheet
|Board covarage||75.00 m2|
|Colour||Translucent grey tint|
|Material||Strong ǀ Tear-resistant ǀ Scrim reinforced|
|Fire Classification||Class E|
|Vapour Resistivity||10-30 MNs/g|
|Applications||Insulated Walls ǀ Floors ǀ Roofs|
|Tensile Strength||High - 320 N/50 mm|
|Vapour Control Layer||Minimizes interstitial condensation risk|
|Features||Flame Resistant ǀ Reinforced ǀ Airtight|
We deliver insulation materials to Mainland UK only. Deliveries to Highlands, Northern Ireland, Isle of Wight etc.. might be possible at additional cost.
We offer free delivery on most of the orders above £300 (excluding VAT) (except special products - shipping cost via courier - products marked ''Request A Quote'')
Delivery of some insulation materials might be extended due to the current situation (Covid-19, stock shortages, allocations).
If you need materials quickly please contact us - we will do our best to help you source materials needed.
We do not deliver on weekends and bank holidays. Sometimes we can deliver on Saturdays - please check with us before placing the order.
If you need any further information please contact us tel. 02081910776
We can help to calculate price per m2 or linear meter (one meter in length) cost, please just contact us via phone 02081910776, email or live chat. Alternatively, you can work it out yourself quickly and easily: to get cost per meter square please divide price shown in orange area by ''Required area (m2)'' Example price of £28.80 divided by board coverage 2.88m2 = cost of £10.00 per m2.
No matter whether you choose a local installer or a national company, there’s a few tips to help you find the right installer for your home insulation improvements, such as asking for recommendations and making sure that they’re part of a certification scheme. This makes sure that they have the right skills and standards of workmanship to carry out the installation, and you can be sure that they know exactly what they are doing.
4 TIPS FOR CHOOSING THE BEST INSULATION INSTALLER
1. Thermal inspection picture in portfolio
It’s worth seeing a installer’s previous work. There’s no harm asking if you can see any properties nearby that they’ve installed insulation in. Best way would be to see Infrared Thermal Imaging Inspections. Thermal cameras spot small, but key changes in temperature in different areas of a house, identifying problematic areas that the human eye never could and some that a visual inspection could only hypothesize.
Along with checking recommendations and previous work, finding reviews online can often be a great way to find out if they provide a good service or not. However, it’s best not to solely rely on reviews you may find or review websites, as there’s no controlling who writes them.
3. Compare prices
Comparing prices will also ensure companies can’t take advantage of you and give you a fair price.
4. Word of Mouth
The best way to find a great insulation installer is through recommendations. Make sure you ask friends and family. They will most likely give you their honest opinion and can tell you from first hand experience.
Whether you require a wall, cladding, external wall, loft or floor insulation fitted, you can find and hire your local insulation installers from popular UK web pages. A simple internet search will return thousands of potential installers near your area.
We are the stockist of construction materials and related products for both trade and DIY from most recognizable brands in the UK like Cordek, RCM, Promat, Rockwool, Isover, Celotex, Xtratherm, Ursa, Low-E, Cedral, Kingspan, Dufaylite, British Gypsum, K-rend, Ecotherm, Iko enertherm, Kay-Metzeler, Terrawool to allow you to complete your insulation job on time at competitive prices and the highest standards.