10mm Fermacell Firepanel is a homogeneous fibre-reinforced gypsum based dry lining fire protection board reinforced with non-flammable fibres for superior fire protection.

Firepanel A1 is a new dimension in fire protection for dry linings, an innovative development of the original Fermacell Gypsum Fibreboard.

Fermacell fire protection panel fully complies with construction building materials class A1 non-combustible to DIN EN 13501-1.

A1 classification for linings are increasingly being specified throughout the UK for public buildings where dry construction methods are used.

Fire safety and fire protection classification have resulted in more stringent national requirements for construction materials and building elements.

The Fermacell Firepanel surface contains an imprint of production data and approvals on the rear side, imprint of Firepanel A1 lettering on the front side.

Gypsum based Firepanel board partition system performance to EN 1364-1 provides 60 minutes fire rated lining.

Specification:

Thickness: 10mm    

Length: 2400mm

Width: 1200mm  

Size: 10mm x 1200mm x 2400mm

Board Coverage: 2.88m2

Thermal Conductivity: 0.38 W/mK 

Material: Homogeneous fibre-reinforced gypsum

Sound performance: 22dB

Density: 1200 kg/m³

Fire Reaction Class: A1, non-combustible

Nominal moisture content ambient: 1.30 %

Flexural Strength Longitudinal: 5.8 N/mm²

Water vapour diffusion resistance: 16μ

Compressive Strength: 18 N/mm²

Elasticity: 4500 N/mm²

pH value: 7-8

Fermacell Firepanel A1 Features:

 · Class A1 Non-combustible.

 · Homogeneous fibre-reinforced gypsum board.

 · With inherent moisture resistance.

 · Used in internal applications for structural fire protection.

 · Complies with the highest building material class A1 (EN 13501-1).

 · Provides even more efficient and slimmer components in fire protection.

 · Installation is just as quick as the standard fibre gypsum board.

Fermacell Firepanel Certification and Approvals:

 · CE Marking Document.

 · ISO 9001 Certificate.

 · BBA Certificate no. 90/2439.

 · Emission dans l'air intérieur class A+.

 · Labelling in accordance with DIN EN 15283-2.

 · Building material class DIN EN 13501-1, non-combustible A1.

 · IMO FTPC part 1: non-combustible classification.

 · Component classifications: National.

 · ECO Institut Tested product ID 1211-13701-016.

 · European Technical Assessment ETA-03/0050.

Fermacell Firepanel A1 Installation Guidelines:

 · With conventional wood processing machines, carbide-tipped tools should generally be used when cutting.

 · As is customary when processing gypsum and gypsum fibre boards, it's recommended wearing a respirator mask, filter FFP1, if dust is generated.

 · For system and application details please also refer to the Fermacell Orange Book.

 · Fermacell recommendations are based on extensive testing and practical experiences.

 · They do not replace guidelines, standards, approvals and applicable technical data sheets.

 · Due to the large number of possible influences for processing and application, we recommend that you carry out trial processing and application.

 · No claims for compensation may be derived from the information provided.

 · Delivery, processing and the warranty on features assured by Fermacell will be in accordance with our General Terms and Conditions.

*Further information may be found in our Downloads section.

Fairly easy access to all PDF files.

Datasheet ǀ Declaration of Performance - DoP ǀ BBA Certificate ǀ Installation Guide ǀ Certificates ǀ Brochure ǀ SPEC Sheet 

*Special Product - Non returnable cancelable.