- BASE PROFILE - PPC GALVANISED
- FULL SYSTEM HEAVY DUTY BASE BEAD
- Base Track - Base Rail - Starter Profile
- External Wall Insulation Systems
- Insulated Render Systems EWI
In Stock
- Brand: WEMICO®
- Model: Galvanised Steel
- Dimensions: 2,500mm x 70mm x 0.85mm
- SKU: HD PPC Base Track
- Product code: P1-1630
- MPN: WE67
Options available
70mm Heavy Duty Base Track PPC is a special starter profile for External Wall Insulation (EWI) systems and thin coat rendering made from polyester powder coated Galvanised Steel which is less expensive than stainless steel.
HD Base Track 70mm is used in insulated render systems as a cover for the lower part of the thermal insulation boards (Expanded Polystyrene Grey and White (EPS), Kingspan K5 or Mineral Wool) against mechanical damage, abrasion, corrosion and pests.
Heavy Duty Starter Bead is a box shaped profile designed for various thicknesses of insulating panels (from 10mm up to 240mm) that provides a protective layer against the combination of moisture and oxygen.
This bottom bead is a 2500mm long profile made from 0.85mm thick polyester powder coated galvanised steel to meet the recommendations of insulated render systems manufacturers.
Polyester powder coating is a robust alternative to conventional paint, providing an essential strong finish, it can be applied to any surface that will not be affected by heat.
Easy to handle and install Heavy Duty Base Beads are available in: 25mm, 30mm, 40mm, 50mm, 60mm, 70mm, 80mm, 90mm, 100mm, 110mm, 120mm, 130mm, 140mm, 150mm, 160mm, 170mm, 180mm, 190mm, 200mm, 210mm, 220mm, 230mm, 240mm and 250mm widths.
Installation:
· Before starting the external wall insulation works, the height of the plinth should be determined and it should be marked with a horizontal line.
· The Heavy Duty Bottom Bead should be installed at a height of approximately 350-400mm from the ground level.
· Heavy Duty Starter Track is fastened to the base with a expansion plug, using at least 10 fixings per 2500mm length.
· The batten should always be fastened in the first and last holes.
· Level the unevenness of the walls with the spacers.
· The end of the Heavy Duty Profiles at the wall corners, where two profiles connect, should be cut at an angle of 45 degrees.
· The Heavy Duty Base Track must be installed perfectly horizontally to facilitate the correct installation of the thermal insulation boards.
· Any deviation from the horizontal will result in gaps between the insulation boards.
Key points:
· Robust polyester powder coating.
· Easily machined and cast.
· Highly durable.
· Less expensive than stainless steel.
· Protection against abrasion and corrosion.
· Good heat conductor.
· High quality.
· Easy to install.
· Can have an indefinite life.
*Further information may be found in our Downloads section.
Fairly easy access to all PDF files.
Datasheet ǀ Declaration of Performance - DoP ǀ BBA Certificate ǀ Installation Guide ǀ Certificates ǀ Brochure ǀ SPEC Sheet
specification | |
Length | 2500mm |
lmetres | 2.5 |
Material | Galvanised Steel |
Profile | Box Shaped |
Thickness | 0.85mm |
Width | 70mm |
Dim A | for 60mm thick boards |
Finish | Polyester Powder Coated ǀ PPC |
Shipping method | Courier |
Applications | External Wall Insulation Systems |
ETA Notification | Yes |
Features | Robust ǀ Full System Base Bead |
Manufacturer | Protektor UK® |
We deliver insulation materials to Mainland UK only. Deliveries to Highlands, Northern Ireland, Isle of Wight etc.. might be possible at additional cost.
We offer free delivery on most of the orders above £300 (excluding VAT) (except special products - shipping cost via courier - products marked ''Request A Quote'')
Delivery of some insulation materials might be extended due to the current situation (Covid-19, stock shortages, allocations).
If you need materials quickly please contact us - we will do our best to help you source materials needed.
We do not deliver on weekends and bank holidays. Sometimes we can deliver on Saturdays - please check with us before placing the order.
If you need any further information please contact us tel. 02081910776
We can help to calculate price per m2 or linear meter (one meter in length) cost, please just contact us via phone 02081910776, email or live chat. Alternatively, you can work it out yourself quickly and easily: to get cost per meter square please divide price shown in orange area by ''Required area (m2)'' Example price of £28.80 divided by board coverage 2.88m2 = cost of £10.00 per m2.
INSTALLERS
No matter whether you choose a local installer or a national company, there’s a few tips to help you find the right installer for your home insulation improvements, such as asking for recommendations and making sure that they’re part of a certification scheme. This makes sure that they have the right skills and standards of workmanship to carry out the installation, and you can be sure that they know exactly what they are doing.
4 TIPS FOR CHOOSING THE BEST INSULATION INSTALLER
1. Thermal inspection picture in portfolio
It’s worth seeing a installer’s previous work. There’s no harm asking if you can see any properties nearby that they’ve installed insulation in. Best way would be to see Infrared Thermal Imaging Inspections. Thermal cameras spot small, but key changes in temperature in different areas of a house, identifying problematic areas that the human eye never could and some that a visual inspection could only hypothesize.
2. Reviews
Along with checking recommendations and previous work, finding reviews online can often be a great way to find out if they provide a good service or not. However, it’s best not to solely rely on reviews you may find or review websites, as there’s no controlling who writes them.
3. Compare prices
Comparing prices will also ensure companies can’t take advantage of you and give you a fair price.
4. Word of Mouth
The best way to find a great insulation installer is through recommendations. Make sure you ask friends and family. They will most likely give you their honest opinion and can tell you from first hand experience.
Whether you require a wall, cladding, external wall, loft or floor insulation fitted, you can find and hire your local insulation installers from popular UK web pages. A simple internet search will return thousands of potential installers near your area.
https://www.nia-uk.org/find-an-installer/
https://www.ratedpeople.com/local-thermal-insulation
STOCKIST
We are the stockist of construction materials and related products for both trade and DIY from most recognizable brands in the UK like Cordek, RCM, Promat, Rockwool, Isover, Celotex, Xtratherm, Ursa, Low-E, Cedral, Kingspan, Dufaylite, British Gypsum, K-rend, Ecotherm, Iko enertherm, Kay-Metzeler, Terrawool to allow you to complete your insulation job on time at competitive prices and the highest standards.