80mm XPS300 Sundolitt® Extruded Polystyrene Insulation Sheet is a 300kPa rigid thermal insulation board made of extruded polystyrene used in high moisture environments such as inverted roofs, flat or zero pitch roofs and green roofs systems.

XPS 300 Sundolitt is a lightweight, easy to cut extruded polystyrene insulation board that doesn't require any special equipment or tools, so can be stored and installed in severe wet weather conditions with no deterioration during its life.

Sundolitt XPS300 80mm, an extremely strong XPS provides a cost effective, low maintenance inverted roof solution where high strength of 300kPa and very good thermal performance are required.

XPS Sundolitt® is a closed cell insulation with high water resistance, an insulation board with exceptional thermal performance and versatility able to withstand extreme loads.

Extruded Polystyrene Sundolitt XPS is designed specifically to meet the needs of high performance insulation in the construction and civil engineering sectors particularly where it may be required to withstand extreme loads.

This insulation board can be used in solid flooring, foundation applications, industrial floors including cold stores and chilled storage facilities.

XPS is not affected by rain, snow or frost and its closed-cell formulation means it retains its insulation performance even in the event that it is installed in a moist environment or in buildings which may be subjected to leakage, precipitation or ingress of water.

Sundolitt® XPS provides excellent thermal performance and high compressive strength of 300kPa in domestic and non-domestic ground floor applications.

XPS is an ideal solution for use as a basement insulation, below ground to insulate the floors and walls ensuring long term performance below ground, even when installed below the water table.

Using XPS within a green roof provides extra cooling during hot summer months and significantly reduced heat loss in the winter.

Specification:

Thickness: 80mm

Length: 1250mm

Width: 600mm

Size: 80mm x 600mm x 1250mm

Board coverage: 0.75m2

Pack coverage: 3.75m2

Density: 33kg/m3

Weight: 2.17kg / board

Thermal Conductivity: 0.036 W/mk

R-Value: 2.20m2K/W

Commpressive Strength: 300kPa

Edge profile: Rebate Edge

Surface: Smooth

Tensile strength: TR200(kPa)

Water vapour permeability: 150(µ)

Sundolitt® XPS300 Board Features:

 · Cost effective solution.

 · Low maintenance product.

 · Extremely lightweight sheets.

 · Easy to cut and customise on site.

 · Extremely strong and durable.

 · Requires no special equipment or tools.

 · Can be stored and installed in severe wet weather conditions.

 · Absorbs a minimum of water.

 · Has a long service life.

 · High compressive strength of 300kPa.

 · Very good thermal performance.

XPS 300 Sundolitt Applications:

 · Car parks.

 · Ports and docks.

 · Civil engineering.

 · Solid flooring.

 · Foundation applications.

 · Industrial floors.

 · Airports and runways.

 · Roads and motorways.

 · Large void fill.

 · Commercial and domestic flooring insulation.

 · Inverted roofing systems.

 · Cold stores and chilled storage facilities.

 · Flat or zero pitched roofs.

 · External wall insulation systems below DPC level.

 · Below ground to insulate the floors and walls.

 · Landscaping and groundworks.

*Further information may be found in our Downloads section.

Fairly easy to access to all PDF files.

Datasheet ǀ Declaration of Performance - DoP ǀ BBA Certificate ǀ Installation Guide ǀ Certificates ǀ Brochure ǀ SPEC Sheet ǀ