Menu
Your Cart

Adhesive for Brick Slips ANTHRACITE 6m² (15kg)

Adhesive for Brick Slips ANTHRACITE 6m² (15kg)
Adhesive for Brick Slips ANTHRACITE 6m² (15kg)
Adhesive for Brick Slips ANTHRACITE 6m² (15kg)
Adhesive for Brick Slips ANTHRACITE 6m² (15kg)
Adhesive for Brick Slips ANTHRACITE 6m² (15kg)
Adhesive for Brick Slips ANTHRACITE 6m² (15kg)
Adhesive for Brick Slips ANTHRACITE 6m² (15kg)
  • Brick Slips Adhesive Colour ANTHRACITE
  • Ready-to-use 15kg Tub - 6m2 coverage
  • External Wall Insulation (EWI) systems
  • For laying and securing brick slips to your walls
  • Extremely strong and easy to apply product
Estimated delivery:
In Stock
£ 120.88
Ex VAT: £ 100.73
  • Brand: Elastolith®
  • Model: Brick Slip Adhesive - Anthracite
  • Weight: 15.00kg
  • Dimensions: 320mm x 170mm x 160mm
  • SKU: Anthracite
  • Product code: P1-2326
  • MPN: Brick Slip Adhesive - Anthracite

Adhesive for Brick Slips ANTHRACITE 15kg Tub (6m²) is ready-to-use all-in-one Brick Slip adhesive and grout made from mineral raw materials used for laying and securing brick slips to your exterior and interior walls.

Special Brick Slip Exterior and Interior Adhesive is an extremely strong and easy to apply product specifically designed for Elastolith Brick Slips, available in 4 most popular colours: White, Cement Grey, Light Grey and Anthracite.

Brick Slips Adhesive is only suitable for laying Elastolith brick slips, the adhesive hardens after processing and forms a single layer with the brick slip.

The adhesive can be used on any firm, clean and dry surface that is able to take the load, free of stresses and slightly absorbent.

Using a layer to promote adhesion (a primer) may be required in some cases.

Highly absorbent surfaces must be pre-treated with a absorbency-regulating primer.

Elastolith systems require no special tools, and you can install brick slips even if you are an inexperienced DIY-er.

Brick Slips Adhesive Anthracite Colour Elastolith (also doubles up as grout) 15kg Tub should cover approx. 6m2.

 

Specification:

 

Weight: 15kg

Length: 320mm

Width: 170mm

Thickness: 1.5-2mm

Application: EWI – External Wall Insulation systems, Facade design

Colour: Anthracite

 

Elastolith Special Brick Slip Adhesive (Anthracite) Installation:

 · Special Adhesive is applied vertically using a toothed trowel: layer thickness approx. 1.5 to 2.0 mm.

 · Depending on the circumstances (temperature, air humidity, etc.), it should not be applied to large surfaces in order to prevent film formation on the adhesive layer.

 · The brick slip is pressed into the wet adhesive with a slight sliding movement.

 · The brick slip must be fully embedded in the adhesive.

 · This can be checked by removing a tiling strip from the facade and checking that the back of the brick slip is fully covered with adhesive.

 · The adhesive at the joins should be smoothed off with a slightly damp brush immediately after installation.

 · The head (outer) joins are smoothed first, after which the bed (inner) joins are smoothed with a long stroke.

 · Make sure that sufficient adhesive is in contact with the sides of the brick slip so that water cannot get behind it.

 · When used outside, the brick slips must be protected against wind and rain for at least 3 days after laying (the time required depends on the temperature and air humidity). 

 · Can be used on interior and exterior walls.

 

Elastolith Brick Slips and Corner Brick Slip Installation:

 · Use a notched trowel (4 mm) to spread the special brick slip adhesive to approximately 1sq.metre area.

 · Used to embed the brick slips, you should also aim to have a layer of adhesive approximately 2mm thick.

 · Then, fix the brick slips to the wall in a staggered formation (like standard brickwork) with a 10mm gap between vertical and horizontal bricks.

 · Elastolith brick slips can be bent around corners with minimal fuss and cut with a sharp pair of scissors.

 · Once the bricks are all installed, a 10mm brush can be used to ‘grout’ the brickwork.

 · Ideally, wet the brush slightly and brush the grout to smooth it out.

 

*Further information may be found in our Downloads section.

Fairly easy access to all PDF files.

Datasheet ǀ Declaration of Performance - DoP ǀ BBA Certificate ǀ Installation Guide ǀ Certificates ǀ Brochure ǀ SDS ǀ SPEC Sheet 

specification
Board covarage 6 m2
Colour ANTHRACITE
Consistancy Ready-to-use product
Density ±1.7 g/cm³
Length 320mm
Material Water-based polymer dispersion
Profile Special Brick Slips Adhesive
Storage +10°C and dry
Thickness 1.5-2mm
Width 170mm
Fire Classification B - s1, d0
Coverage 6m2
Dimensions 320x170x160mm
Quantity 15kg tub
Application Temperature from +5 °C to +25 °C
Shipping method Rigid Vehicle ǀ Courier
Applications External Wall Insulation | Façade Design
ETA Notification Yes
Features Ready-to-use adhesive for laying and securing brick slips
Manufacturer Elastolith Adhesive®

Write a review

Note: HTML is not translated!
Bad Good

We deliver insulation materials to Mainland UK only. Deliveries to Highlands, Northern Ireland, Isle of Wight etc.. might be possible at additional cost.
We offer free delivery on most of the orders above £300 (excluding VAT) (except special products - shipping cost via courier - products marked ''Request A Quote'')

Delivery of some insulation materials might be extended due to the current situation (Covid-19, stock shortages, allocations).
If you need materials quickly please contact us - we will do our best to help you source materials needed.

We do not deliver on weekends and bank holidays. Sometimes we can deliver on Saturdays - please check with us before placing the order.
If you need any further information please contact us tel. 02081910776

We can help to calculate price per m2 or linear meter (one meter in length) cost, please just contact us via phone 02081910776, email or live chat. Alternatively, you can work it out yourself quickly and easily: to get cost per meter square please divide price shown in orange area by ''Required area (m2)'' Example price of £28.80 divided by board coverage 2.88m2 = cost of £10.00 per m2.

INSTALLERS

No matter whether you choose a local installer or a national company, there’s a few tips to help you find the right installer for your home insulation improvements, such as asking for recommendations and making sure that they’re part of a certification scheme. This makes sure that they have the right skills and standards of workmanship to carry out the installation, and you can be sure that they know exactly what they are doing.

4 TIPS FOR CHOOSING THE BEST INSULATION INSTALLER

1. Thermal inspection picture in portfolio

It’s worth seeing a installer’s previous work. There’s no harm asking if you can see any properties nearby that they’ve installed insulation in. Best way would be to see Infrared Thermal Imaging Inspections. Thermal cameras spot small, but key changes in temperature in different areas of a house, identifying problematic areas that the human eye never could and some that a visual inspection could only hypothesize.

2. Reviews

Along with checking recommendations and previous work, finding reviews online can often be a great way to find out if they provide a good service or not. However, it’s best not to solely rely on reviews you may find or review websites, as there’s no controlling who writes them.

3. Compare prices

Comparing prices will also ensure companies can’t take advantage of you and give you a fair price. 

4. Word of Mouth

The best way to find a great insulation installer is through recommendations. Make sure you ask friends and family. They will most likely give you their honest opinion and can tell you from first hand experience.

 

Whether you require a wall, cladding, external wall, loft or floor insulation fitted, you can find and hire your local insulation installers from popular UK web pages. A simple internet search will return thousands of potential installers near your area.

 

https://www.nia-uk.org/find-an-installer/

https://www.checkatrade.com/

https://www.mybuilder.com/

https://www.ratedpeople.com/local-thermal-insulation

 

STOCKIST

We are the stockist of construction materials and related products for both trade and DIY from most recognizable brands in the UK like Cordek, RCM, Promat, Rockwool, Isover, Celotex, Xtratherm, Ursa, Low-E, Cedral, Kingspan, Dufaylite, British Gypsum, K-rend, Ecotherm, Iko enertherm, Kay-Metzeler, Terrawool to allow you to complete your insulation job on time at competitive prices and the highest standards.

 

Whether you are a large company or a DIYer, if you need a large amount of insulation materials, we can offer quantity discounts at the best prices. Please contact us and our friendly customer service will try to find the best and cheapest solutions for you. We value your time and we will try to deliver the products as soon as possible at a reasonable price to your construction site or house. The UK's leading insulation supplier near you and your needs. Price List available upon request.
Adhesive for Brick Slips ANTHRACITE 6m² (15kg)
Adhesive for Brick Slips ANTHRACITE 6m² (15kg)
£ 120.88