Menu
Your Cart

15mm Promat PROMATECT-XW A1 Fire Protection Board

15mm Promat PROMATECT-XW A1 Fire Protection Board (60 minutes fire protection to structural steel)
15mm Promat PROMATECT-XW A1 Fire Protection Board (60 minutes fire protection to structural steel)
15mm Promat PROMATECT-XW A1 Fire Protection Board (60 minutes fire protection to structural steel)
15mm Promat PROMATECT-XW A1 Fire Protection Board (60 minutes fire protection to structural steel)
15mm Promat PROMATECT-XW A1 Fire Protection Board (60 minutes fire protection to structural steel)
15mm Promat PROMATECT-XW A1 Fire Protection Board (60 minutes fire protection to structural steel)
15mm Promat PROMATECT-XW A1 Fire Protection Board
  • 15mm Promat PROMATECT-XW A1 Fire Protection Board
  • Fully tested at limiting temperatures from 300ºC to 650ºC
  • 60 minutes fire protection to structural steel columns and beams
  • Thinner solution in comparison with other fire‑resistant constructions
  • Quick, easy to cut and install saving time and reducing installed cost
Estimated delivery:
In Stock
£ 179.88
Ex VAT: £ 149.90
  • Brand: Promat®
  • Model: 15mm PROMATECT-XW
  • Weight: 44.10kg
  • Dimensions: 2,500mm x 1,200mm x 15mm
  • SKU: 15mm XW
  • Product code: P1-2602
  • MPN: 15mm PROMATECT-XW

Options available

15mm Promat PROMATECT-XW is an A1 non‑combustible and moisture resistant Fire Protection Board used for the protection of structural steel giving up to 60 minutes fire protection to structural steel columns and beams.

PROMATECT-XW is used to provide one, two, three or four sided encasements to: columns, beams, joists, floors with profiled metal decking, hollow sections, partially exposed members, wind posts, bracing, perimeter and lattice beams.

This water repellent, fire protection board is typically used in any project where there is a requirement for up to 60 minutes fire protection or where space is limited, and speed of installation is important.

Promat PROMATECT®-XW has permanent dimensional stability, so in the event of a fire it reduces the speed at which the steelwork will heat up, allowing it to maintain its load bearing capacity for longer.

Fire Protection Board Promat Promatect-XW is manufactured at the ETEX plant in Germany and is fully tested at limiting temperatures from 300ºC to 650ºC.

Promat Promatect-XW provides a clean, impact resistant finish and is used where the fire protection system is in full view and where it is hidden.

It offers the specifier a clean, boxed appearance and can be applied on unpainted steelwork, it can also accept a decorative finish and therefore be used where aesthetics are important.

Promatect-XW by Promat is often a thinner solution in comparison with other fire‑resistant constructions.

This Board can be installed up to 6 months before the building is weather tight (can be left exposed for up to 6 months on site).

 

Specification:

 

Thickness: 15mm

Width: 1200mm

Length: 2500mm

Board Coverage: 3.00m2

Thermal Conductivity: 0.264W/mK (at 20ºC)

Colour: off-white

Density: 935kg/m³

Classification temperature: 300ºC to 650ºC

Fire Rating: A1 Non-combustible

Fire Protection: 60 minutes

Reaction to Fire: Class 1 (Surface Spread of Flame)

Resistance to Fire: Class 0 (Building Regulations)

 

Promat PROMATECT®-XW Fire Protection Board Features:

 · A1 non‑combustible.

 · Dimensionally stable.

 · 60 minutes fire protection to structural steel.

 · Quick, easy to cut and install saving time and reducing installed cost.

 · Tested at limiting temperatures from 300ºC to 650ºC.

 · Frameless system minimises space.

 · Single board thickness for ease of ordering and stocking.

 · No requirement for adhesive or joint fillers.

 · Smooth, impact resistant surface.

 · Water, weather and mould resistant.

 · Can be installed and left exposed for up to 6 months on site.

 · Tested to BS 476:Part 21:1987.

 · Third Party assessed by Certifire CF5942.

 · High levels of fire protection to structural steelwork.

 

*Further information may be found in our Downloads section.

Fairly easy access to all PDF files.

Datasheet ǀ Declaration of Performance - DoP ǀ BBA Certificate ǀ Installation Guide ǀ Certificates ǀ Brochure ǀ SPEC Sheet

specification
Board covarage 3.00 m2
Colour Off White
Density 935kg/m3
Length 2500mm
Material Fire Protective Board
Profile Square Edge
Size 15mm x 1200mm x 2500mm
Temperature resistance from 300ºC to 650ºC
Thermal Conductivity 0.264W/mK (at 20 ºC)
Thickness 15mm
Water Vapour Resistivity 20μ
Weight/m2 14.70kg
Width 1200mm
Fire Classification 300ºC - 650ºC
Building Regulations Class ‘0’ to UK Building Regulations
Fire performance 60 minutes (A1)
Finish Smooth face
Application Temperature from +5 °C to +25 °C
Shipping method Articulated Vehicle ǀ Courier
Applications Fire protection of structural steel
Features 60 minutes fire protection to structural steel
Manufacturer Promat PROMATECT®-XW

Write a review

Note: HTML is not translated!
Bad Good

We deliver insulation materials to Mainland UK only. Deliveries to Highlands, Northern Ireland, Isle of Wight etc.. might be possible at additional cost.
We offer free delivery on most of the orders above £300 (excluding VAT) (except special products - shipping cost via courier - products marked ''Request A Quote'')

Delivery of some insulation materials might be extended due to the current situation (Covid-19, stock shortages, allocations).
If you need materials quickly please contact us - we will do our best to help you source materials needed.

We do not deliver on weekends and bank holidays. Sometimes we can deliver on Saturdays - please check with us before placing the order.
If you need any further information please contact us tel. 02081910776

We can help to calculate price per m2 or linear meter (one meter in length) cost, please just contact us via phone 02081910776, email or live chat. Alternatively, you can work it out yourself quickly and easily: to get cost per meter square please divide price shown in orange area by ''Required area (m2)'' Example price of £28.80 divided by board coverage 2.88m2 = cost of £10.00 per m2.

INSTALLERS

No matter whether you choose a local installer or a national company, there’s a few tips to help you find the right installer for your home insulation improvements, such as asking for recommendations and making sure that they’re part of a certification scheme. This makes sure that they have the right skills and standards of workmanship to carry out the installation, and you can be sure that they know exactly what they are doing.

4 TIPS FOR CHOOSING THE BEST INSULATION INSTALLER

1. Thermal inspection picture in portfolio

It’s worth seeing a installer’s previous work. There’s no harm asking if you can see any properties nearby that they’ve installed insulation in. Best way would be to see Infrared Thermal Imaging Inspections. Thermal cameras spot small, but key changes in temperature in different areas of a house, identifying problematic areas that the human eye never could and some that a visual inspection could only hypothesize.

2. Reviews

Along with checking recommendations and previous work, finding reviews online can often be a great way to find out if they provide a good service or not. However, it’s best not to solely rely on reviews you may find or review websites, as there’s no controlling who writes them.

3. Compare prices

Comparing prices will also ensure companies can’t take advantage of you and give you a fair price. 

4. Word of Mouth

The best way to find a great insulation installer is through recommendations. Make sure you ask friends and family. They will most likely give you their honest opinion and can tell you from first hand experience.

 

Whether you require a wall, cladding, external wall, loft or floor insulation fitted, you can find and hire your local insulation installers from popular UK web pages. A simple internet search will return thousands of potential installers near your area.

 

https://www.nia-uk.org/find-an-installer/

https://www.checkatrade.com/

https://www.mybuilder.com/

https://www.ratedpeople.com/local-thermal-insulation

 

STOCKIST

We are the stockist of construction materials and related products for both trade and DIY from most recognizable brands in the UK like Cordek, RCM, Promat, Rockwool, Isover, Celotex, Xtratherm, Ursa, Low-E, Cedral, Kingspan, Dufaylite, British Gypsum, K-rend, Ecotherm, Iko enertherm, Kay-Metzeler, Terrawool to allow you to complete your insulation job on time at competitive prices and the highest standards.

 

Whether you are a large company or a DIYer, if you need a large amount of insulation materials, we can offer quantity discounts at the best prices. Please contact us and our friendly customer service will try to find the best and cheapest solutions for you. We value your time and we will try to deliver the products as soon as possible at a reasonable price to your construction site or house. The UK's leading insulation supplier near you and your needs. Price List available upon request.
15mm Promat PROMATECT-XW A1 Fire Protection Board (60 minutes fire protection to structural steel)
15mm Promat PROMATECT-XW A1 Fire Protection Board
£ 179.88