Menu
Your Cart

200mm Ancon Teplo BF2 Cavity Wall Tie Type 2 Masonry General Purpose

200mm Teplo BF-2 Wall Tie Cavity (Masonry General Purpose) Type 2
200mm Ancon Teplo BF2 Cavity Wall Tie Type 2 Masonry General Purpose
  • 200mm - Cavity width: 50mm - 75mm
  • Thermal Conductivity of 0.7W/mK
  • Type 2 Teplo BF-2 is BBA approved
  • Embedment - between 62.5mm and 75mm in each leaf
  • BF-2 Can be used only up to 15meters height
Estimated delivery:
In Stock
£ 4.94
Ex VAT: £ 4.12
  • Brand: Leviat-Ancon®
  • Model: Type-2 BF-2
  • Dimensions: 200mm x 1mm x 1mm
  • SKU: 200mm BF-2
  • Product code: P1-1532
  • MPN: 200mm Ancon Teplo-BF-2

200mm Ancon Teplo BF2 Cavity Wall Tie is a Masonry General Purpose Type BF 2 composite wall tie manufactured from pultruded basalt fibres with very low thermal conductivity of 0.7W/mK.

The Type 2 Teplo BF 2 is a BBA certified product and can be used in line with NHBC standards to prevent heat escape from the buildings.

Teplo BF2 wall ties are available in: 200mm, 225mm, 250mm, 275mm, 300mm, 325mm, 350mm, 375mm, 400mm and 425mm lengths to suit cavities from 50mm up to 300mm.

The 200mm Ancon Teplo-BF-2 General Purpose Type 2 Ties are suitable for 50mm to 75mm cavities.

Ancon Teplo BF-2 has professional moulded safety ends which offer improved buildability and mortar bond strength.

The enhanced bond makes it ideal for use in slow drying lime mortars.

Teplo-BF-2 has innovative movable 'O' ring drip to prevent water crossing the cavity.

Masonry General Purpose Type 2 cavity wall tie is designed for domestic and small commercial buildings.

Suitable for flat sites where the basic wind speed is up to 31m/s and altitude is not more than 150meters above the sea level.

Teplo BF-2 tie can be used in external walls of domestic houses up to 15meters in height. 

Recommended design embedment of the tie is between 62.5mm and 75mm in each leaf.

 

Specification:

 

Tie Length: 200mm

Cavity width: 50mm - 75mm

Teplo BF-2 : BBA-approved (GP)

 

Key points:

 · Thermal conductivity of 0.7W/mK.

 · Masonry to masonry wall tie.

 · Teplo BF 2 Wall Tie general purpose.

 · Can be used up to 15m height.

 · BBA certified product.

 · Ancon Teplo-BF-2 has moulded safety end.

 · Movable 'O' ring drip to prevent water crossing the cavity.

 · In line with NHBC standards.

 · For domestic and small commercial buildings.

 

*Further information may be found in our Downloads section.

Fairly easy access to all PDF files.

Datasheet ǀ Declaration of Performance - DoP ǀ BBA Certificate ǀ Installation Guide ǀ Certificates ǀ Brochure ǀ SPEC Sheet

specification
Cavity width from 50mm to 75mm
Length 200mm
Material Pultruded basalt fibres
Profile Buildings up to 15m in height
Thermal Conductivity 0.7W/mK
Design Embedment Resin/Mortar 62.5mm - 75mm
Shipping method Courier
Applications Cavities ǀ Domestic Buildings
BBA Certified Yes
Type 2 ǀ Masonry General Purpose
ETA Notification Yes
Features Moulded safety ends ǀ 'O' ring
Manufacturer Ancon® ǀ Leviat®

Write a review

Note: HTML is not translated!
Bad Good

We deliver insulation materials to Mainland UK only. Deliveries to Highlands, Northern Ireland, Isle of Wight etc.. might be possible at additional cost.
We offer free delivery on most of the orders above £300 (excluding VAT) (except special products - shipping cost via courier - products marked ''Request A Quote'')

Delivery of some insulation materials might be extended due to the current situation (Covid-19, stock shortages, allocations).
If you need materials quickly please contact us - we will do our best to help you source materials needed.

We do not deliver on weekends and bank holidays. Sometimes we can deliver on Saturdays - please check with us before placing the order.
If you need any further information please contact us tel. 02081910776

We can help to calculate price per m2 or linear meter (one meter in length) cost, please just contact us via phone 02081910776, email or live chat. Alternatively, you can work it out yourself quickly and easily: to get cost per meter square please divide price shown in orange area by ''Required area (m2)'' Example price of £28.80 divided by board coverage 2.88m2 = cost of £10.00 per m2.

INSTALLERS

No matter whether you choose a local installer or a national company, there’s a few tips to help you find the right installer for your home insulation improvements, such as asking for recommendations and making sure that they’re part of a certification scheme. This makes sure that they have the right skills and standards of workmanship to carry out the installation, and you can be sure that they know exactly what they are doing.

4 TIPS FOR CHOOSING THE BEST INSULATION INSTALLER

1. Thermal inspection picture in portfolio

It’s worth seeing a installer’s previous work. There’s no harm asking if you can see any properties nearby that they’ve installed insulation in. Best way would be to see Infrared Thermal Imaging Inspections. Thermal cameras spot small, but key changes in temperature in different areas of a house, identifying problematic areas that the human eye never could and some that a visual inspection could only hypothesize.

2. Reviews

Along with checking recommendations and previous work, finding reviews online can often be a great way to find out if they provide a good service or not. However, it’s best not to solely rely on reviews you may find or review websites, as there’s no controlling who writes them.

3. Compare prices

Comparing prices will also ensure companies can’t take advantage of you and give you a fair price. 

4. Word of Mouth

The best way to find a great insulation installer is through recommendations. Make sure you ask friends and family. They will most likely give you their honest opinion and can tell you from first hand experience.

 

Whether you require a wall, cladding, external wall, loft or floor insulation fitted, you can find and hire your local insulation installers from popular UK web pages. A simple internet search will return thousands of potential installers near your area.

 

https://www.nia-uk.org/find-an-installer/

https://www.checkatrade.com/

https://www.mybuilder.com/

https://www.ratedpeople.com/local-thermal-insulation

 

STOCKIST

We are the stockist of construction materials and related products for both trade and DIY from most recognizable brands in the UK like Cordek, RCM, Promat, Rockwool, Isover, Celotex, Xtratherm, Ursa, Low-E, Cedral, Kingspan, Dufaylite, British Gypsum, K-rend, Ecotherm, Iko enertherm, Kay-Metzeler, Terrawool to allow you to complete your insulation job on time at competitive prices and the highest standards.

 

Whether you are a large company or a DIYer, if you need a large amount of insulation materials, we can offer quantity discounts at the best prices. Please contact us and our friendly customer service will try to find the best and cheapest solutions for you. We value your time and we will try to deliver the products as soon as possible at a reasonable price to your construction site or house. The UK's leading insulation supplier near you and your needs. Price List available upon request.
200mm Teplo BF-2 Wall Tie Cavity (Masonry General Purpose) Type 2
200mm Ancon Teplo BF2 Cavity Wall Tie Type 2 Masonry General Purpose
£ 4.94