Menu
Your Cart

25mm EPS70 Floor Polystyrene Insulation Jablite Jabfloor ǀ pack of 12

25mm EPS70 Floor Polystyrene Insulation Jablite Jabfloor ǀ pack of 12
25mm EPS70 Floor Polystyrene Insulation Jablite Jabfloor ǀ pack of 12
25mm EPS70 Floor Polystyrene Insulation Jablite Jabfloor ǀ pack of 12
25mm EPS70 Floor Polystyrene Insulation Jablite Jabfloor ǀ pack of 12
25mm EPS70 Floor Polystyrene Insulation Jablite Jabfloor ǀ pack of 12
  • 8ft by 4ft sheets (8' x 4')
  • Compressive Strength: <70kPa
  • Suitable above a concrete slab or a precast concrete
  • EPS70 is rot proof - unaffected by bacteria moulds or fungi
  • EPS70 is Moisture resistant - non irritant and odourless non-toxic
Estimated delivery:
In Stock
£ 128.93
Ex VAT: £ 107.44
  • Brand: Jablite®
  • Model: 25mm EPS 70
  • Dimensions: 2,400mm x 1,200mm x 25mm
  • SKU: 25mm
  • Product code: P1-965
  • MPN: 25mm Jabfloor EPS 70

Options available

25mm Expanded Polystyrene EPS70 Jablite Jabfloor Insulation Board is an economical, long lasting, thermally efficient, easy to cut and install universal EPS insulation board suitable for insulating floors, walls and roofs.

Expanded Polystyrene EPS 70 25mm is an excellent permanent insulating material for the lifetime of the building which demonstrates consistent thermal performance over the range of temperatures normally encountered in buildings.

EPS70 2400mm x 1200mm x 25mm Sheets are moisture resistant, rot proof, unaffected by bacteria, mould or fungi and is non-toxic, non irritant and odourless polystyrene insulation board, compatible with most building products.

Jablite EPS Polystyrene is available in sheets or blocks in various grades from EPS70, EPS100, EPS150 up to EPS500 and EPS E with flame-retardant additive.

EPS70 and EPS100 are premium expanded polystyrene products which have outstanding thermal insulation properties with thermal conductivity of 0.032 and 0.031 W/mk respectively.

Jablite EPS Polystyrene insulation board is a highly versatile, lightweight, cellular closed cell plastic material suitable for a wide range of building-insulation applications.

EPS Jablite Insulation is completely CFC and HCFC free and comprises expandable beads of polystyrene pre-foamed and fused together in a steam-heated mould under pressure.

Expanded Polystyrene is suitable above a concrete slab or a precast concrete floor in domestic ground-floor constructions, then finished with a wearing layer of chipboard to satisfy the Building Regulations' U-value requirements.

The material should be stored under cover protected from direct sunlight and out of contact with ground moisture.

EPS 70 Jablite is a 100% recyclable insulating panel, easy to handle and cut without the need of special tools.

 

Specification:

 

Width: 1200mm

Length: 2400mm

Edging: Square Edge

Pack Coverage: 34.56m2

Density: 15kg/m3

R-Value: 0.68m2K/W

Thermal Conductivity: 0.038W/mK

Compressive Strength: <70kPa

Fire Rating (Reaction to Fire): F

 

Applications:

 · Flooring.

 · Precast concrete floor.

 · Domestic ground-floor constructions.

 · Thermal insulation subject to low mechanic loads.

 · Thermal insulation of walls and ceilings from the bottom.

 · Insulation performed in a light-wet method.

 · Insulation of walls with cladding, ventilated by air slots.

 · Thermal crown insulation made under the plaster and as insulation of lintels and door frames.

 · Insulation of ceilings made of reinforced concrete as lost planking.

 · Insulation of steep roofs laid under the bearing structure.

 

Storage:

 · The panels should be stored in the original wrapping, under cover and protected from direct sunlight. 

 · Panels should be kept above ground level and out of contact with solvents and materials containing volatile organic compounds such as coal tar, pitch or timber recently treated with creosote. 

 · Do not expose to naked flame or other ignition sources during storage or installation.

 

Certification:

 · Jablite products are produced to the requirements of BS EN 13163.

 · Manufactured and approved to BS EN ISO 9001:2000 Quality systems.

 

*Further information may be found in our Downloads section.

Fairly easy access to all PDF files.

Datasheet ǀ Declaration of Performance - DoP ǀ BBA Certificate ǀ Installation Guide ǀ Certificates ǀ Brochure ǀ SPEC Sheet 

specification
Board covarage 34.56 m2
Colour White with grey dots
Compressive Strength 70kPa
Density 15kg/m3
Length 2400mm
Material Expanded Polystyrene - EPS
Pack Coverage 34.56m2
R-Value 0.68m2K/W
Thermal Conductivity 0.038W/mK
Thickness 25mm
Width 1200mm
Building Regulations Compliant
Coverage 34.56m2
Edging Square Edge
Shipping method Articulated Vehicle
Applications Flooring ǀ Walls ǀ Construction
ETA Notification Yes
Features Versatile EPS ǀ Polystyrene Board
Manufacturer Jablite Jabfloor EPS®

Write a review

Note: HTML is not translated!
Bad Good

We deliver insulation materials to Mainland UK only. Deliveries to Highlands, Northern Ireland, Isle of Wight etc.. might be possible at additional cost.
We offer free delivery on most of the orders above £300 (excluding VAT) (except special products - shipping cost via courier - products marked ''Request A Quote'')

Delivery of some insulation materials might be extended due to the current situation (Covid-19, stock shortages, allocations).
If you need materials quickly please contact us - we will do our best to help you source materials needed.

We do not deliver on weekends and bank holidays. Sometimes we can deliver on Saturdays - please check with us before placing the order.
If you need any further information please contact us tel. 02081910776

We can help to calculate price per m2 or linear meter (one meter in length) cost, please just contact us via phone 02081910776, email or live chat. Alternatively, you can work it out yourself quickly and easily: to get cost per meter square please divide price shown in orange area by ''Required area (m2)'' Example price of £28.80 divided by board coverage 2.88m2 = cost of £10.00 per m2.

INSTALLERS

No matter whether you choose a local installer or a national company, there’s a few tips to help you find the right installer for your home insulation improvements, such as asking for recommendations and making sure that they’re part of a certification scheme. This makes sure that they have the right skills and standards of workmanship to carry out the installation, and you can be sure that they know exactly what they are doing.

4 TIPS FOR CHOOSING THE BEST INSULATION INSTALLER

1. Thermal inspection picture in portfolio

It’s worth seeing a installer’s previous work. There’s no harm asking if you can see any properties nearby that they’ve installed insulation in. Best way would be to see Infrared Thermal Imaging Inspections. Thermal cameras spot small, but key changes in temperature in different areas of a house, identifying problematic areas that the human eye never could and some that a visual inspection could only hypothesize.

2. Reviews

Along with checking recommendations and previous work, finding reviews online can often be a great way to find out if they provide a good service or not. However, it’s best not to solely rely on reviews you may find or review websites, as there’s no controlling who writes them.

3. Compare prices

Comparing prices will also ensure companies can’t take advantage of you and give you a fair price. 

4. Word of Mouth

The best way to find a great insulation installer is through recommendations. Make sure you ask friends and family. They will most likely give you their honest opinion and can tell you from first hand experience.

 

Whether you require a wall, cladding, external wall, loft or floor insulation fitted, you can find and hire your local insulation installers from popular UK web pages. A simple internet search will return thousands of potential installers near your area.

 

https://www.nia-uk.org/find-an-installer/

https://www.checkatrade.com/

https://www.mybuilder.com/

https://www.ratedpeople.com/local-thermal-insulation

 

STOCKIST

We are the stockist of construction materials and related products for both trade and DIY from most recognizable brands in the UK like Cordek, RCM, Promat, Rockwool, Isover, Celotex, Xtratherm, Ursa, Low-E, Cedral, Kingspan, Dufaylite, British Gypsum, K-rend, Ecotherm, Iko enertherm, Kay-Metzeler, Terrawool to allow you to complete your insulation job on time at competitive prices and the highest standards.

 

Whether you are a large company or a DIYer, if you need a large amount of insulation materials, we can offer quantity discounts at the best prices. Please contact us and our friendly customer service will try to find the best and cheapest solutions for you. We value your time and we will try to deliver the products as soon as possible at a reasonable price to your construction site or house. The UK's leading insulation supplier near you and your needs. Price List available upon request.
25mm EPS70 Floor Polystyrene Insulation Jablite Jabfloor ǀ pack of 12
25mm EPS70 Floor Polystyrene Insulation Jablite Jabfloor ǀ pack of 12
£ 128.93