Largely manufactured from recycled glass (e.g. windscreens) and mineral base materials such as sand and without the use of binding agents. The ingredients are melted into molten glass, which is cooled and crushed into a fine powder. The powdered glass is poured into molds and heated (below the melting point) in a "sintering" process that causes the particles to adhere to one another. Next, a small amount of finely ground carbon-black is added and the material is heated in a "cellulation" process. Here, the carbon reacts with oxygen, creating carbon dioxide, which creates the insulating bubbles in the (material). CO2 accounts for more than 99% of the gas in the cellular spaces.
Cellulose insulation is a material made from recycled newspaper. The paper is shredded and inorganic salts, such as boric acid, are added for resistance to fire, mould, insects and vermin. The insulation is installed either blown or damp-sprayed depending on application.
Wood fibre
The success of wood fibre insulation derives from an attractive environmental profile combined with a whole bag of functions including rigid insulation, sheathing and sarking for timber frames, roofs and flooring as well as flexible insulation for studs and rafters.
Wood of course is renewable, it sequesters carbon during its growth and product production is relatively free from pollution. The insulation value of wood fibre boards is not as dimensionally efficient as some of the orthodox petro-chemical materials - but it's no slouch either - typically coming in with a 'k value' range of between 0.038-0.043 W/mK depending on format.
Hemp
Hemp fibres are produced from hemp straw of the hemp plant. Most hemp is imported, but an increasing amount of home-grown crop is becoming available. Hemp grows up to a height of nearly 4 metres within a period of 100-120 days. Because the plants shade the soil, no chemical protection or toxic additives are required for hemp cultivation. The product is composed of, usually, 85% hemp fibre with the ballance made up of polyester binding and 3-5% soda added for fire proofing.
Straw
Straw is an agricultural by-product, the dry stalks of cereal plants, after the grain and chaff have been removed. Straw makes up about half of the yield of cereal crops such asbarley, oats, rice, rye and wheat.
100x225x1200mm Hyfloor Strip Foundation System Unilin XT/HYF is an engineered floor insulation used to achieve Future Homes Standard and passive floor performance.
The Hyfloor Strip Foundation System provides effective insulation that has been detailed and installed professionally at the initial ..
100x225x1200mm Hyfloor Strip Foundation System Unilin XT/HYF
Engineered floor insulation with high performance foundation riser panels
Used to achieve Future Homes Standard and passive floor performance
Hyfloor System that provides thermal performance and robust detailing
Suitable for use with built-in full fill and partial fill wall insulation
12.7mm Promat PROMATECT®-MST Fire Resistant Board is a rigid non-combustible insulation board specifically formulated without asbestos and mineral fibres used as a thermal break in process plants and as single skin insulation in ovens and dryers.
Fire Protection Board Promatect-MST 12.7mm is an e..
Promat PROMATECT®-MST A1 Fire Resistant Board 12.7mm
Effective and stable fire insulation solution for demanding applications
Good rigidity properties even when exposed to high temperatures of 1000ºC
Rigid fire insulation board with up to 240 minutes fire resistance (protection)
12mm Promat PROMATECT®-250 is a mineral bound lightweight calcium-silicate fire protection board made with PROMAXON® technology, used for the fire protection of structural steel ‘H’ or ‘I’ shaped beams and columns and mezzanine floors.
Promat PROMATECT 250 is a 2500mm long by 1200mm wide calcium ..
12mm Promat PROMATECT 250 Fire Protection Board
A1 non-combustible low density calcium-silicate insulation board
PROMATECT®-250 is made with special PROMAXON® technology
Used for protection of steel structures and mezzanine floors
Provides up to 150 minutes fire protection to structural steelwork
15mm PIR Rigid Insulation Board Xtratherm (Unilin) 1200mm x 1200mm is a thinnest rigid foil faced polyisocyanurate (PIR) thermal foam insulation board designed for roofs, walls, floors, timber and steel framed systems.
Unilin (Xtratherm) PIR insulation boards are stable, rot proof and will remain..
1200mm x 1200mm x 15mm
Foil Faced PIR Rigid Foam Insulation Board
Certified thermal conductivity as low as 0.022W/mK!
15mm Promat PROMATECT-XW is an A1 non‑combustible and moisture resistant Fire Protection Board used for the protection of structural steel giving up to 60 minutes fire protection to structural steel columns and beams.
PROMATECT-XW is used to provide one, two, three or four sided encasements to: c..
15mm Promat PROMATECT-XW A1 Fire Protection Board
Fully tested at limiting temperatures from 300ºC to 650ºC
60 minutes fire protection to structural steel columns and beams
Thinner solution in comparison with other fire‑resistant constructions
Quick, easy to cut and install saving time and reducing installed cost
15mm Unilin XT/PR Thin-R Pitched Roof PIR Insulation Board is a thinnest PIR rigid thermal foam insulation board used in roof construction to achieve Future Home and Passive House Standards.
XT/PR Unilin PIR Board is a high performance foil faced rigid insulation foam with a certified thermal con..
15mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
15mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
15mm Unilin XT/TF Thin-R Timber Frame Insulation Board is a thinnest PIR rigid thermal foam insulation board used in wall construction to achieve Future Home and Passive House Standards.
XT/TF Unilin PIR Board is a high performance foil faced rigid insulation foam with a certified thermal conduct..
15mm Unilin XT/UF Thin-R Floor Insulation Board is a thinnest PIR rigid thermal foam insulation board used in floor construction to achieve Future Home and Passive House Standards.
XT/UF Underfloor Unilin PIR Board is a high performance insulation with a certified thermal conductivity of 0.022W/m..
15mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
15mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
15mm Unilin (Xtratherm) Thin-R Insulation Board (2400mm x 1200mm x 15mm) is an ultra thin rigid foil faced polyisocyanurate (PIR) thermal foam multi-application insulation board designed for roofs, walls, floors, timber and steel framed systems.
Xtratherm (Unilin) Thin-R range is a high-efficienc..
20mm Kingspan Kooltherm K5 Wall Board is a high-performance masonry wall insulation board, with a fibre-free rigid thermoset phenolic core used for external wall insulation behind traditional, lightweight thin coat rendering and dry cladding systems.
Kooltherm K5 External Wall Board 20mm is a pre..
20mm Kooltherm K5 Kingspan External Wall Board
Certified Thermal Conductivity of 0.022 W/mK
Fire Rating (Reaction to Fire) Euroclass C-s2,d0
Resistant to the passage of Water Vapour
For use behind traditional and lightweight polymer Renders
20mm Promat VERMICULUX-S is an A1 class non-combustible calcium silicate board which provides up to 240 minutes fire protection for buildings storing high value items or assets, including museums, data centres and bonded warehouses.
VERMICULUX-S is used to protect one, two, three or four sided en..
21mm Unilin FR/TP Warm Roof Insulation Decking is an insulated panel made of 15mm PIR rigid foam insulation core bonded to 6mm WBP grade plywood used for new and refurbishment flat roof applications.
Unilin FR/TP Thermal Ply Flat Roof Insulation Board is faced to the under side with a gas-tight f..
24.5mm (15mm) Unilin XT/TL Insulated Plasterboard is made of 15mm Unilin PIR insulation core bonded to 9.5mm plasterboard used for internal walls, ceilings, pitched and flat roof applications.
Unilin XT/TL Insulation and Drylining Board provides an effective vapour control layer and is suitable..
15mm Unilin PIR insulation core bonded to 9.5mm plasterboard
Used for internal walls, ceilings, pitched and flat roof applications
Suitable for a variety of wall types for both refurbishment and new build
Unilin XT/TL thermal laminate incorporates an integral vapour barrier
Improves energy efficiency of your home by reducing energy costs
24.5mm Unilin XT/TL-MF (Mech Fix) is a foil backed insulated plasterboard made of 15mm Unilin PIR insulation core bonded to 9.5mm plasterboard used for internal walls, sloped roofs and ceilings.
The composite foil facing on Unilin XT/TL-MF Insulation and Drylining Board provides a gas and vapour ..
24.5mm Xtratherm XT/TL Thermal Liner Composite Insulated Plasterboard Dot & Dab is an insulated panel combined of polyisocyanurate (PIR) rigid insulation foam core bonded to 9.5mm or 12.5mm tapered edge plasterboard that is suitable for internal applications, fixed with adhesive dot and dab direct b..
24.5mm Xtratherm Thin-R XT/TL-MF Thermal Liner Mech Fix is an insulated panel combined of PIR rigid insulation foam core bonded to 9.5mm plasterboard suitable for internal masonry walls, sloped rafters and ceilings.
Xtratherm XT/TL-MF Mechanically Fixed Drylining Board is a highly versatile and d..
Provides Effective Vapour Control Layer
Reducing Energy Consumption and Costs
For a Variety of Wall Types - Internal Walls, Sloped Roofs, Ceilings
Insulation & Drylining in one Application - Refurbishment & New Build
XT/TL-MF is only suitable for mechanically fixed applications
24mm Plydeck Xtratherm (PIR with OSB Board) Flat Roof Insulation Decking is a three-in-one solution designed to provide decking, vapour control layer and high levels of thermal insulation in one easy applicable flat roof product.
Xtratherm Plydeck is a composite board of enhanced PIR (polyisocyan..
Knauf RS60 Black Tissue Faced 2 Sides Insulation Slab is a 25mm thick fire and acoustic rock mineral wool insulation slab, used for providing fire resistance and thermal insulation for roofs, concrete car park soffits and similar applications.
Rocksilk RS60 Slab (25mm x 600mm x 1200mm) faced with..
25mm Celotex CW4000 Partial Fill Cavity Wall Insulation Board (CW4025) is an easy to install PIR (polyisocyanurate) rigid insulation board, featuring a low emissivity foil facings with excellent thermal conductivity of 0.022 W/mk that is suitable for partial fill masonry cavity wall applications.
..
25mm EcoTherm EcoVersal PIR Insulation Board 5 in 1 Solution is a universal multi-purpose fibre free rigid polyisocyanurate insulation core faced with an aluminium foil composite on both sides designed for insulating pitched roofs, floors, walls, ceilings and dormer cheeks.
Ecotherm Eco-Versal 24..
25mm EPS 70 Expanded Polystyrene Kay-Metzeler Kay-Cel Flooring Insulation Board is a universal cost-effective, long lasting, thermally efficient and completely CFC and HCFC free standard eps insulation board suitable for multiple applications primarily used in residential buildings.
Kay-Metzeler ..
8ft by 4ft sheets (8' x 4')
Compressive Strength: <70kPa
Suitable above a concrete slab or a precast concrete
EPS70 is rot proof - unaffected by bacteria moulds or fungi
EPS70 is Moisture resistant - non irritant and odourless non-toxic
25mm Expanded Polystyrene EPS70 Jablite Jabfloor Insulation Board is an economical, long lasting, thermally efficient, easy to cut and install universal EPS insulation board suitable for insulating floors, walls and roofs.
Expanded Polystyrene EPS 70 25mm is an excellent permanent insulating mate..
8ft by 4ft sheets (8' x 4')
Compressive Strength: <70kPa
Suitable above a concrete slab or a precast concrete
EPS70 is rot proof - unaffected by bacteria moulds or fungi
EPS70 is Moisture resistant - non irritant and odourless non-toxic
25mm EPS70 Polystyrene Insulation Board Stylite is a cost-effective, quick and easy to install thermally efficient standard EPS insulation board which will remain effective for the life span of the building.
Stylite SPI Expanded Polystyrene Insulation Board 25mm is suitable above a concrete slab ..
25mm Xtratherm FR/ALU Flat Roof PIR Insulation Board Thin-R is a top-class polyisocyanurate foam core insulation board with vapour resistant gas-tight foil facers suitable for loose laid ballasted and mechanically fixed single ply waterproofing systems.
Thin-R FR/ALU is a thermally efficient roof..
BBA Certification No. 11/4817
Vapour resistant foil facers
Loose laid ballasted systems
Thermal Conductivity: 0.022W/mK
Compatible with mechanically fixed single ply systems
25mm Xtratherm Thin-R FR/MG Flat Roof Insulation is a high-quality polyisocyanurate foam core (PIR) insulation board with mineral coated glass facers designed for use below single ply fully adhered roof membranes, single ply waterproofing systems and partially bonded built-up felt.
Xtratherm Flat..
25mm Kingspan Kooltherm K103 Floorboard is an advanced floor insulation board with a glass tissue facings designed for suspended floors, ground supported floors and underfloor heating systems (UFH).
Kingspan Kooltherm K103 25mm x 1200mm x 2400mm Flooring Board is an approved insulation with therm..
Kingspan Kooltherm K103 (previously K3)
Phenolic insulation thermal conductivity of 0.019 W/mK
Easy to handle and install - Non-deleterious material
25mm Kingspan Kooltherm K107 Pitched Roof Insulation Board is an advanced pitched roof insulation board with certified thermal conductivity of 0.019 W/mK across all thicknesses.
K107 Insulation Board is an ideal solution for insulating your roof and can be simply retrofitted when converting an at..
25mm Kingspan Thermaroof TR26 LPC/FM is a high performance PIR insulation board for flat roofs, fully compatible with most mechanically fixed single-ply waterproofing systems and green roof systems.
The Thermaroof® TR26 LPC/FM Boards are manufactured with Nilflam® technology, a high performance r..
25mm Kingspan TR26 Flat Roof PIR Rigid Insulation Board
TR26 Thermal Conductivity (lambda) as low as 0.022W/mK
Compatible with mechanically fixed single-ply waterproofing
High performance PIR Rigid Insulation board for flat roofs
Fully compatible with green roof systems (2400mm x 1200mm)
25mm Kingspan Thermaroof TR27 is a flat roof insulation board used on roofs waterproofed with fully-adhered, single-ply, partially-bonded, built-up felt, mastic asphalt or cold liquid applied waterproofing.
Kingspan TR27 is manufactured to the highest standards offering a thermal conductivity of ..
25mm Knauf RS60 Black Tissue Faced Insulation Slab is an acoustic rock mineral wool based, class A1 non-combustible insulation slab, used for structural elements such as roofs, concrete car park soffits and similar applications.
Knauf Rocksilk RS60 is a medium density (60kg/m3) insulation slab wi..
Black Tissue Faced Knauf Rocksilk RS60 Insulation Slab A1 (25mm)
Density 60kg/m3 Thermal conductivity (lambda) of 0.034W/mK
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Provides from 30 minutes up to 240 minutes fire protection
Used for structural elements such as concrete car park soffits
25mm Promat PROMASIL-1000L Fire Insulation Board 1000°C is a large-size, lightweight fire insulation board with very good thermal properties and thermal stability up to 1000°C, used in the fireplaces and stoves systems.
Promat PROMASIL-1000L Boards are often used in heavy industry for anode bakin..
25mm Promat PROMASIL-1100 SUPER Insulation Board 1050°C is a lightweight fire insulation board with very good thermal properties and thermal stability up to 1050°C, used in the fireplaces and stoves construction.
Promat PROMASIL-1100 SUPER Boards are suitable for multiple uses in single layer sys..
25mm Promat PROMASIL-1100 SUPER Insulation Board 1050°C
Fireplaces, Wood Burning Stoves, PROMAFOUR® fireplace systems
Very good thermal properties and thermal stability up to 1050°C
Extra low thermal conductivity calcium-silicate fire insulation board
Multiple uses in single layer systems for penetration seals in walls and slabs
25mm Knauf RS100 Insulation Slab Black Tissue Faced One Side is a rigid A1 class, non-combustible fire resistant insulation slab, used for structural elements such as roofs, concrete car park soffits and similar applications.
Knauf Rocksilk RS100 is a high density (100kg/m3) insulation slab with ..
25mm Knauf RS100 Black Tissue Faced 1 Side Insulation Slab A1
High density 100kg/m3 Thermal conductivity (lambda) 0.034W/mK
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Provides from 30 minutes up to 240 minutes fire protection
Used for structural elements such as concrete car park soffits
25mm Single Board Kingspan Kooltherm® K5 Insulation is an advanced external wall insulation board for masonry walls, with a fibre-free rigid thermoset phenolic core, used for external wall insulation systems and thin coat rendering.
The K5 boards are suitable for use behind traditional and lightw..
Single Board 25mm Kingspan Kooltherm K5 External Wall Insulation
600mm x 1200mm Kooltherm K5 Thermal conductivity 0.022W/mK
Used for external wall thermal insulation systems, thin coat rendering
Perfect solution for buildings that can’t be insulated on the inside
The thinnest commonly used External Wall Insulation (EWI) Board
25mm Xtratherm Safe-R SR/UF Floor Insulation Board is a top-class rigid phenolic foam insulation board with a low emissivity aluminium foil facings designed for ground supported floors, suspended floors and underfloor heating (UFH).
Xtratherm SR/UF range is a BBA certified high-efficiency thermal..
25mm Unilin FR/ALU Thin-R Flat Roof Insulation Board comprising a rigid polyisocyanurate (PIR) insulation board with a composite gas-tight foil facings on both sides.
Flat Roof Board FR/ALU is used as a thermal insulation and to create or improve falls on limited access concrete, timber or metal ..
25mm Unilin FR/ALU Thin-R Flat Roof PIR Insulation Board
Rigid PIR Insulation Board with a gas-tight foil facings on both sides
Used as a thermal insulation on timber or metal flat roof decks
High Performance Board used in conjunction with a vapour control layer
Used with a single-ply mechanically fixed roof waterproofing membrane
The 25mm Unilin Thin-R FR/BGM Flat Roof Insulation Board is faced with a polypropylene fleece finished bitumen glass-fibre working surface and a mineral glass facing to the underside.
FR/BGM boards are suitable for use with most bitumen based, partially bonded waterproofing systems typically incl..
Unilin FR/BGM Flat Roof Insulation Board 25mm x 600mm x 1200mm
Faced with a polypropylene fleece finished bitumen glass-fibre working surface
Faced with a mineral glass facing to the underside insulation board surface
Used for partially bonded torched-on built-up bituminous felt systems
Can be used as a cheaper alternative to Celotex and Kingspan TR24 Insulation
25mm Unilin Flat Roof FR/MG is a high performance Polyisocyanurate with mineral coated glass facers suitable for use below single ply waterproofing systems and partially bonded built-up felt.
FR/MG Insulation Board for use as a thermal insulation layer and to create or improve falls on limited ac..
25mm x 600mm x 1200mm Unilin FR/MG Flat Roof Insulation Board
High Performance PIR Insulation Board with mineral coated glass facers
For concrete, timber or metal flat roof decks in domestic and non-domestic buildings
Used below single ply waterproofing systems and partially bonded built-up felt
Can be used as a cheaper alternative to Celotex and Kingspan Therma Roof Insulation
25mm Unilin SR/PR Safe-R, a rigid phenolic foam insulation board with a composite foil-facing on both sides, for use in warm pitched roofs in new and existing domestic and non-domestic buildings.
Safe-R Pitched Roof Unilin SR/PR on sloped roofs (ventilated, hybrid or warm roofs) provides the most..
25mm Unilin Thin-R XT/CW PIR Cavity Insulation Board is used in traditional masonry walls, built to the highest thermal standards whilst maintaining a residual cavity, offering protection from wind driven rain.
Unilin Cavity Wall (T&G) tongue and groove jointing offers a practical onsite solution..
25mm Unilin Thin-R XT/CW Partial Fill Cavity Wall Insulation Board
Reduced the Thermal Bridging and improved the U-Value of the wall
Low emissivity foil facing on XT/CW improves the thermal performance
Recommended residual cavity width is 50mm (Building Regulations)
Most effective method of preventing wind-driven rain penetrating a wall
25mm Unilin Xtroliner XO/PR is a warm roof construction board, comprising a rigid foam modified Polyisocyanurate (PIR) core with robust textured low emissivity aluminium foil facings.
Using XO/PR used above or between the roof rafters ensures that the structure is kept at or near the internal env..
25mm Unilin XO/PR XtroLiner Pitched Warm Roof PIR Insulation Board
Used above or between the rafters reducing thermal stress and condensation risk
Rigid foam modified Polyisocyanurate (PIR) core with textured robust facings
Lambda (thermal conductivity) of 0.021 W/mK and Euroclass C s2 d0 fire classification
Used on ventilated, hybrid or warm and sloped roofs to achieve most efficient U-values
25mm XtroDeck XO/XD Unilin is faced with an embossed aluminum facing on both sides high performance flat roof board used for partially bonded, self adhered built-up bituminous felt roof systems.
Flat Roof Insulation XO/XD is manufactured to EN 13165 by Unilin Insulation with a declared lambda (th..
25mm Unilin Xtroliner XtroDeck XO/XD Flat Roof PIR Insulation Board
Premium Rigid PIR Insulation Board with an embossed aluminum facings
Used for partially bonded, self adhered built-up bituminous felt roof systems
Lambda (thermal conductivity) of 0.021 W/mK and Euroclass C s2 d0 fire classification
Unilin XtroDeck XO/XD flat roof insulation board may also be fully bonded
27.5mm Celotex PL4000 PIR Thermal Insulation Board (PL4015) is an easy to install high-performance insulated plasterboard consist of polyisocyanurate rigid insulation foam core bonded to 12.5mm plasterboard that can be used in pitched roofs (underneath the rafters), flat roofs (underneath the joists..
Vapour Barrier build in
External walls – internal lining
Pitched roofs – underneath the rafters
Flat roofs – underneath the joists
Time saving 2 in 1 solution - insulate and dry line walls
27.5mm (28mm) XT/TL-FR is a fire resistant insulated plasterboard made of 15mm Unilin PIR foam insulation core bonded to 12.5mm fire plasterboard used in drylining applications where fire rating is crucial.
Fire Resistant Insulated Plasterboard with a Pink Paper Face offers 30 minutes fire protec..
27.5mm (28mm) XT/TL-FR Fire Resistant Insulated Plasterboard
Fire plasterboard used in drylining applications where fire rating is crucial
Pink Paper Front Face offers 30 minutes fire protection in a single layer
Provides an effective vapour control layer (integral vapour barrier build in)
FR Insulated Plasterboard can be readily cut using a sharp knife or fine toothed saw
27.5mm Unilin XT/TL-MR is a moisture resistant insulated plasterboard made of 15mm Unilin PIR foam insulation core bonded to 12.5mm moisture resistant plasterboard used in high humidity conditions.
Unilin XT/TL-MR Moisture Resistant Insulation Board improves moisture resistance and thermal perfor..
27.5mm Xtratherm XT/TL-MR Thermaliner PIR Moisture Resistant is an insulated plasterboard combined of PIR insulation core bonded to 12.5mm moisture resistant plasterboard designed for internal building areas of high humidity conditions.
XT/TL-MR Thermal Liner Unilin is designed to improve moistur..
Provides Effective Vapour Control Layer
Improving Moisture Resistance and Thermal Performance
Applications: Kitchen and Bathroom Walls and Ceiling Installations...
Insulation & Drylining in one Application - Refurbishment & New Build
Strong Moisture Resistant Paperliners - Water Repellent
Tapered Roof Unilin TR/ALU 30-50mm is the tapered version of Flat Roof FR/ALU, it is faced on both sides with composite gas tight foil facings bonded to a Polyisocyanurate (PIR) core during manufacture.
Unilin TR/ALU Tapered Roof systems address most flat roof failures i.e. ponding of rainwater c..
30-50mm Unilin TR/BGM (Torch-on) is a high performance PIR tapered roof insulation with a polypropylene fleece finished bitumen/glass fibre working surface and a mineral glass facing to the underside.
Unilin TR/BGM boards are not reversible, they are suitable for use below most bitumen based part..