32.5mm K118 Kingspan Kooltherm (30mm) Insulated Plasterboard is an advanced 3 in 1 product for internal wall insulation used as mechanically fixed and adhesively bonded 'dot and dab' thermal insulated plasterboard.

Kingspan Kooltherm K118 range is a fibre-free rigid phenolic thermoset insulation core with a certified thermal conductivity (lambda value) of 0.019W/mK bonded to a premium 12.5mm plasterboard.

K118 Insulated Plasterboard (previously Kingspan Kooltherm K18 and K17) provides high-levels of insulation, dry-lining and vapour control layer in one easily applicable 8 x 4 sheets.

Kingspan Kooltherm is a durable thermal insulated plasterboard designed to save money by reducing the heat loss from buildings.

These easy to install and decorate premium insulation panels are suitable for new build and refurbishment projects.

The insulation core and facings used in the manufacture of Kingspan K118 resist attack by mould, fungi, bacteria and microbial growth.

K118 is a high-performance rigid thermoset fibre-free phenolic insulation manufactured with a blowing agent that has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP).

The front facing of Kooltherm K118 is a 12.5mm tapered edge gypsum plasterboard which easily accepts dry jointing materials and plaster skim finish.

The reverse facing of Kingspan Kooltherm K118 is a low emissivity composite foil, autohesively bonded to the phenolic insulation core during manufacture. 

This reflective, low emissivity surface improves the thermal resistance of any unventilated cavity adjacent to the product.

If correctly installed, Kingspan Kooltherm K118 can have an indefinite life (durability depends on the supporting structure).

Specification:

Width: 1200mm

Length: 2400mm

Pack Quantity: 24

Pack Coverage: 69.12m2

Board Coverage: 2.88m2

R-Value: 1.15m2K/W

Thermal Conductivity: 0.019W/mK

Compressive Strength: >100 (kPa)

Reaction to Fire: Euroclass C-s1, d0

Key points:

 · Premium performance rigid thermoset phenolic insulation.

 · Thermal conductivity (lambda value) of 0.019 W/mK!

 · Insulation, dry-lining and vapour barrier in one board.

 · Allows quick response heating.

 · Unaffected by air infiltration.

 · Standard size 2400mm x 1200mm (8 x 4) boards.

 · Resistant to the passage of water vapour.

 · Easy to handle and install.

 · Ideal for new build, retrofit and refurbishment.

 · Non-deleterious material.

 · Manufactured with a blowing agent that has zero ODP and low GWP.

Resistance to Solvents, Fungi and Rodents:

The insulation core is resistant to short-term contact with petrol and with most dilute acids, alkalis and mineral oils. 

However, it is recommended that any spills be cleaned off fully before the boards are installed. 

Ensure that safe methods of cleaning are used, as recommended by the suppliers of the spilt liquid. 

The insulation core is not resistant to some solvent-based adhesive systems, particularly those containing methyl ethyl ketone. 

Adhesives containing such solvents should not be used in association with this product. 

Damaged boards or boards that have been in contact with harsh solvents or acids should not be used. 

Water Vapour Resistance:

The non-plasterboard component of the product typically achieves a resistance far greater than 100 MNs/g, when tested in accordance with BS EN 12086: 2013 .

For the purposes of calculation of condensation risk, the resistivity of the plasterboard component of the product should be taken as 50 MNs/gm.

Standards and approvals:

 · BBA Certificate 16/5299.

 · ISO 9001: 2015 (Quality Management Systems. Requirements).

 · ISO 14001: 2015 (Environmental Management Systems. Requirements).

 · BS OHSAS 18001: 2007 (Occupational Health & Safety Management Systems. Requirements).

 · ISO 50001: 2011 (Energy Management Systems. Requirements with guidance for use). 

*Further information may be found in our Downloads section.

Fairly easy access to all PDF files.

Datasheet ǀ Declaration of Performance - DoP ǀ BBA Certificate ǀ Installation Guide ǀ Certificates ǀ Brochure ǀ SPEC Sheet 

*Special Product - Non returnable cancelable.