Menu
Your Cart

27.5mm Insulated Plasterboard XT/TL-FR Fire Liner

27.5mm Insulated Plasterboard XT/TL-FR Fire Liner
27.5mm Insulated Plasterboard XT/TL-FR Fire Liner
27.5mm Insulated Plasterboard XT/TL-FR Fire Liner
27.5mm Insulated Plasterboard XT/TL-FR Fire Liner
27.5mm Insulated Plasterboard XT/TL-FR Fire Liner
27.5mm Insulated Plasterboard XT/TL-FR Fire Liner
27.5mm Insulated Plasterboard XT/TL-FR Fire Liner
  • 27.5mm (28mm) XT/TL-FR Fire Liner Insulated Plasterboard
  • Fire plasterboard used in drylining applications where fire rating is crucial
  • Pink Paper Front Face offers 30 minutes fire protection in a single layer
  • Provides an effective vapour control layer (integral vapour barrier build in)
  • FR Insulated Plasterboard can be readily cut using a sharp knife or fine toothed saw
Estimated delivery:
In Stock
£ 116.36
Ex VAT: £ 96.97

Options available

27.5mm (28mm) XT/TL-FR is an insulated plasterboard made of 15mm Unilin PIR foam insulation core bonded to 12.5mm fire plasterboard used in drylining applications where fire rating is crucial.

FR Insulated Plasterboard with a Pink Paper Face offers 30 minutes fire protection in a single layer and is an ideal solution for receiving a plaster finish or for direct decoration.

XT/TL-FR Fire Rated Pink Plasterboard improves fire protection and thermal performance in kitchens, bathrooms, toilets, walls and ceilings.

This Drylining Board provides an effective vapour control layer and is suitable for a variety of wall types for both refurbishment and new build projects.

The composite kraft facing on both sides of the XT/TL-FR Thermal Laminate incorporates an integral vapour barrier, which helps to reduce the risk of condensation.

Fire Plasterboard can provide up to 60 minutes fire resistance, which can be achieved with a double layer application of pink plasterboard.

If you need a 60 minutes fire rating you can use a second layer of fire plasterboard over the installed XT/TL-FR insulated plasterboard.

This fire insulated plasterboard can be readily cut using a sharp knife or fine toothed saw.

Appropriate PPE should be worn when handling XT/TL-FR Insulated Plasterboard.

Thermal conductivity of PIR (polyisocyanurate) foam core is 0.022 W/mK.

Thermal conductivity of fire shield plasterboard is 0.24 W/mK.

 

Specification:

 

Thickness: 27.5mm

Length: 2400mm

Width: 1200mm

Size: 27.5mm x 1200mm x 2400mm

Board coverage: 2.88m2

R-Value: 0.80 m2K/W

Thermal Conductivity: 0.022 W/mk

Density (Foam Core): 30-32 Kg/m3

Compressive Strength: >150 kPa

Water Vapour Resistivity: >100 MNs/gm

Reaction to Fire PIR Core: Euroclass B s1 d0

Reaction to Fire Plasterboard: 30 minutes Fire Rated

 

XT/TL-FR Insulated Plasterboard Features:

 · Used in drylining applications where fire rating is crucial.

 · Pink Paper Face offers 30 minutes fire protection in a single layer.

 · Can be readily cut using a sharp knife or fine toothed saw.

 · Improving fire resistance and thermal performance.

 · Applications: kitchen and bathroom, walls and ceilings.

 · Strong fire resistant paperliners - 30 minutes fire rated.

 · Insulation and drylining in one easy applicable product.

 · Provides effective Vapour Control Layer (VCL).

 · Thermal conductivity of PIR core as low as 0.022W/mK.

 · Reduced insulation thickness.

 · Helps to reduce the risk of condensation.

 · Suitable for a variety of wall types.

 · Cost effective 3 in 1 solution. 

 · Suitable for refurbishment and new build.

 · Improving living conditions.

 · Easy to install and decorate.

 

Insulated Plasterboard XT/TL-FR (Fire Resistant) Installation:

 · Ensure the wall is dry and free from any protrusions / wall paper etc.

 · Mark the position of XT/TL-FR fire resistant insulated plasterboard on the wall. 

 · Setting out and planning board positioning is essential.

 · Apply adhesive dabs to the wall in accordance with BS8212, ensuring a 50mm continuous ribbon of adhesive is created at the top and bottom of each board and around all openings. 

 · Follow adhesive manufacturer’s guidelines.

 · General recommendation is to apply vertical dabs at 300mm centres, 25mm in from the edge. 

 · Dabs should be 50-75mm wide and approximately 25mm deep to allow for tamping. 

 · Total contact with board area should be minimum 20%. 

 · Maximum height installation for this system is 3m.

 · Lift the XT/TL-FR fire resistant insulated plasterboard into position using wedges on the floor.

 · Align XT/TL-FR fire resistant insulated plasterboard squarely on wall. 

 · Apply pressure to the board to level and embed it into the adhesive. 

 · Allow a 15mm expansion joint at the top and bottom of the panel, and fill with foam filler. 

 · Insulation should be cut back to accommodate an adjoining panel at external corners. 

 · Joints should be tightly butted.

 · When the adhesive has dried, 3 mechanical fixings (thermally broken) should be fixed through the centre of the board.

 · Seal and tape the joints of XT/TL-FR fire resistant insulated plasterboard to ensure a the continuous vapour control layer is created.

 · Plaster skim to finish. 

 · When upgrading existing properties, a professional should be engaged to assess the property for appropriate insulation treatments and effective detailing. 

 · Walls should be dry and decoration stripped back to the wall substrate. 

 · Appropriate ventilation strategies must be considered as part of the overall energy upgrade.

 

Special product - non returnable / cancellable.

specification
Board covarage 2.88 m2
Compressive Strength 150 kPa
Density 30-32 Kg/m3
Length 2400mm
Material PIR ǀ Fire resistant plasterboard
R-Value 0.80 m2K/W
Size 27.5mm x 1200mm x 2400mm
Thermal Conductivity 0.022 W/mk
Thickness 27.5mm overall
Water Vapour Resistivity 100 MNs/gm
Width 1200mm
Fire Classification 30 minutes
Vapour Resistivity 100 MNs/gm
Finish Pink Paper Face offers 30 minutes fire protection
Shipping method Articulated Vehicle ǀ Courier
Applications Kitchen ǀ Bathroom ǀ Walls ǀ Ceilings
Type Fire Resistant Insulated Plasterboard
Vapour Control Layer Yes, build in
Fixing method Adhesive bonding (Dot and Dab)
Decoration Accept drywall adhesive
ETA Notification Yes
Features 30 minutes fire protection in a single layer
Manufacturer Unilin Insulation + Knauf Drywall

Write a review

Note: HTML is not translated!
Bad Good

We deliver insulation materials to Mainland UK only. Deliveries to Highlands, Northern Ireland, Isle of Wight etc.. might be possible at additional cost.
We offer free delivery on most of the orders above £300 (excluding VAT) (except special products - shipping cost via courier - products marked ''Request A Quote'')

Delivery of some insulation materials might be extended due to the current situation (Covid-19, stock shortages, allocations).
If you need materials quickly please contact us - we will do our best to help you source materials needed.

We do not deliver on weekends and bank holidays. Sometimes we can deliver on Saturdays - please check with us before placing the order.
If you need any further information please contact us tel. 02081910776

We can help to calculate price per m2 or linear meter (one meter in length) cost, please just contact us via phone 02081910776, email or live chat. Alternatively, you can work it out yourself quickly and easily: to get cost per meter square please divide price shown in orange area by ''Required area (m2)'' Example price of £28.80 divided by board coverage 2.88m2 = cost of £10.00 per m2.

INSTALLERS

No matter whether you choose a local installer or a national company, there’s a few tips to help you find the right installer for your home insulation improvements, such as asking for recommendations and making sure that they’re part of a certification scheme. This makes sure that they have the right skills and standards of workmanship to carry out the installation, and you can be sure that they know exactly what they are doing.

4 TIPS FOR CHOOSING THE BEST INSULATION INSTALLER

1. Thermal inspection picture in portfolio

It’s worth seeing a installer’s previous work. There’s no harm asking if you can see any properties nearby that they’ve installed insulation in. Best way would be to see Infrared Thermal Imaging Inspections. Thermal cameras spot small, but key changes in temperature in different areas of a house, identifying problematic areas that the human eye never could and some that a visual inspection could only hypothesize.

2. Reviews

Along with checking recommendations and previous work, finding reviews online can often be a great way to find out if they provide a good service or not. However, it’s best not to solely rely on reviews you may find or review websites, as there’s no controlling who writes them.

3. Compare prices

Comparing prices will also ensure companies can’t take advantage of you and give you a fair price. 

4. Word of Mouth

The best way to find a great insulation installer is through recommendations. Make sure you ask friends and family. They will most likely give you their honest opinion and can tell you from first hand experience.

 

Whether you require a wall, cladding, external wall, loft or floor insulation fitted, you can find and hire your local insulation installers from popular UK web pages. A simple internet search will return thousands of potential installers near your area.

 

https://www.nia-uk.org/find-an-installer/

https://www.checkatrade.com/

https://www.mybuilder.com/

https://www.ratedpeople.com/local-thermal-insulation

 

STOCKIST

We are the stockist of construction materials and related products for both trade and DIY from most recognizable brands in the UK like Cordek, RCM, Promat, Rockwool, Isover, Celotex, Xtratherm, Ursa, Low-E, Cedral, Kingspan, Dufaylite, British Gypsum, K-rend, Ecotherm, Iko enertherm, Kay-Metzeler, Terrawool to allow you to complete your insulation job on time at competitive prices and the highest standards.

 

Whether you are a large company or a DIYer, if you need a large amount of insulation materials, we can offer quantity discounts at the best prices. Please contact us and our friendly customer service will try to find the best and cheapest solutions for you. We value your time and we will try to deliver the products as soon as possible at a reasonable price to your construction site or house. The UK's leading insulation supplier near you and your needs. Price List available upon request.
27.5mm Insulated Plasterboard XT/TL-FR Fire Liner
27.5mm Insulated Plasterboard XT/TL-FR Fire Liner
£ 116.36