Menu
Your Cart

125mm Unilin ECO/MA Solid and Suspended Floor Board (pack of 3)

125mm Unilin ECO/MA Solid and Suspended Floor Board (pack of 3)
125mm Unilin ECO/MA Solid and Suspended Floor Board (pack of 3)
125mm Unilin ECO/MA Solid and Suspended Floor Board (pack of 3)
125mm Unilin ECO/MA Solid and Suspended Floor Board (pack of 3)
125mm Unilin ECO/MA Solid and Suspended Floor Board (pack of 3)
125mm Unilin ECO/MA Solid and Suspended Floor Board (pack of 3)
125mm Unilin ECO/MA Solid and Suspended Floor Board (pack of 3)
125mm Unilin ECO/MA Solid and Suspended Floor Board (pack of 3)
125mm Unilin ECO/MA Solid and Suspended Floor Board (pack of 3)
  • 125mm Unilin ECO 360 Premium Floor PIR Insulation Board (Floorboard)
  • High performance - Thermal conductivity (lambda value) of 0.020 W/mK
  • Unilin ECO360 meets U-Values specified in the Building Regulations
  • RIBA/RIAI Climate Challenge 2030, LETI Standards, Future Homes Hub targets
  • Bio-enhanced board will significantly improve the U-Value of new and existing floors
Estimated delivery:
In Stock
£ 635.88
Ex VAT: £ 529.90
  • Brand: Unilin Insulation (UK) known as Xtratherm
  • Model: 125mm Unilin ECO360 Floor
  • Weight: 30.00kg
  • Dimensions: 2,400mm x 1,200mm x 125mm
  • SKU: 125mm Unilin ECO360 Floor
  • Product code: P1-3349
  • MPN: 125mm Unilin ECO360 Floor

Options available

125mm Unilin ECO360 Floor Board, a rigid foam bio-enhanced PIR core with textured robust low emissivity foil facings, used for underfloor heating, solid and suspended floors.

It is lightweight, easy to install and combines high compressive strength with low thermal conductivity, providing a high performance solution for floor insulation.

Unilin ECO360 MA (Floorboard) has the strength and thermal properties required to reach the high performance U-Values specified in the Building Regulations.

ECO360 MA Bio Enhanced Insulation for Floors offers excellent insulation performance with a thermal conductivity (lambda value) of 0.020 W/mK.

Using pioneering environmentally conscious technology, ECO360 MA in floor applications will reduce heat loss while also delivering excellent thermal bridging details.

This bio-enhanced insulation will significantly improve the U-Value of new and existing floors.

The product packaging is biodegradable and the overall content has been reduced significantly.

Unilin ECO360 Floor Board offers a bio-enhanced formulation which is halogen free.

ECO360 is a part of a design solution to achieve RIBA/RIAI Climate Challenge 2030, LETI Standards and the Future Homes Hub targets.

 

Specification:

 

Thickness: 125mm

Width: 1200mm

Length: 2400mm

Size: 125mm x 1200mm x 2400mm

Board Coverage: 2.88m2

Pack Coverage: 8.64m2

Profile: Square Edge

R-Value: 6.25m2K/W

Thermal Conductivity: 0.020 W/mK

Reaction to Fire: NPD

Compressive Strength: >150 (kPa)

 

Unilin ECO360 Floorboard Features:

 · Halogen free.

 · Biodegradable packaging.

 · High compressive strength.

 · Suitable for underfloor heating.

 · Suitable for solid and suspended floors.

 · Bio-enhanced PIR rigid foam insulation.

 · Achieve RIBA/RIAI Climate Challenge 2030

 · Enhanced performance lambda as low as 0.020 W/mK.

 · Improves the U-Value of new and existing floors.

 · Meets U-Values specified in the Building Regulations.

 · Achieve LETI Standards and the Future Homes Hub targets.

 

Unilin ECO360 Floorboard Installation:

Below Concrete Slab:

 · Lay and level the hardcore in layers 150mm min/250mm max and compact well.

 · Sand blind base to create a level surface and to protect DPM.

 · The damp proof membrane (DPM), normally 1200g polythene or radon barrier, should be laid over the blinding, tape lapped joints to prevent passage of ground moisture.

 · Carry DPM up to the wall to meet and seal with the DPC course (contact the membrane manufacturer for further guidance on installation and best practice).

 · Lay the ECO360 MA for floors across the DPM.

 · If two layers are required, lay the boards in a staggered jointed pattern.

 · Closely butt all edges.

 · Place Unilin Perimeter Strips (XO/STR) around floor perimeter to provide robust detailing in order to reduce Thermal Bridging.

 · Ensure the top of the perimeter strip is level with the top of the floor finish.

 · Seal around any service penetrations.

 · Lay a thin gauge polythene sheet, to act as a separating layer, over the insulation with 150mm lap joints.

 · VCL should be taped at the joints to ensure a continuous separating layer, as per BRE GBG 45 “Insulating Ground Floors”.

 · If underfloor heating is required, lay pipes and clip to the insulation boards through the separating layer.

 · Follow UFH manufacturer’s guidelines.

 · Pour and compact concrete slab to required finish floor level.

Below Floor Screed:

 · Lay and level the concrete slab, allowing sufficient time to dry out, as per BS 8203.

 · Beam and block floors may need a levelling screed or grouting to ensure base level (refer to manufacturer’s guidelines).

 · The damp proof membrane (DPM), normally 1200g polythene or radon barrier, should be laid over the blinding, tape lapped joints to prevent passage of ground moisture.

 · Carry DPM up to the wall to meet and seal with the DPC course (contact the membrane manufacturer for further guidance on installation and best practice).

 · Lay the ECO360 MA for floors boards across the DPM.

 · If two layers are required, lay the boards in a staggered jointed pattern.

 · Closely butt all edges.

 · Place Unilin Perimeter Strips (XO/STR) around floor perimeter to provide robust detailing in order to prevent Thermal Bridging.

 · Ensure the top of the perimeter strip is level with top of floor finish.

 · Seal around any service penetrations.

 · Lay a thin gauge polythene sheet, to act as a separating layer, over the insulation with 150mm lap joints.

 · Separating layers should be taped at the joints to ensure a continuous separating layer, as per BRE GBG 45 “Insulating Ground Floors”.

 · If underfloor heating is required, lay pipes and clip to the insulation boards through the separating layer.

 · Follow manufacturer’s guidelines.

 · Pour screed according to screed manufacturer’s guidelines.

Suspended Timber Floor:

 · Install joists in the normal manner, ensuring adequate ventilation.

 · Measure gaps between joists and cut ECO360 MA for floors to size, allowing for variations in joist spacings.

 · Mechanically fasten treated timber battens to the joists, allowing for correct thickness of insulation.

 · Galvanised nails or saddle clips may also be used, ensuring nails are left 40mm proud of the joists.

 · Install ECO360 MA for floors between joists with joints tightly butted and seal any gaps with expanding foam.

 · If two insulation layers are required, lay the boards in a staggered jointed pattern, also sealing any gaps with expanding foam.

 · Floor boards should be laid directly to the joists.

 

Certification and standards:

 · BBA Certification No.12/4956.

 · BS EN ISO 9001 Quality Management System.

 · BS EN ISO 14001 Environmental Management System.

 · BS EN 13165.

 

*Further information may be found in our Downloads section.

Fairly easy access to all PDF files.

Datasheet ǀ Declaration of Performance - DoP ǀ BBA Certificate ǀ Installation Guide ǀ Certificates ǀ Brochure ǀ SPEC Sheet 

*Special Product - Non returnable cancelable.

specification
Board covarage 8.64 m2
Colour Light yellow
Compressive Strength 150 kPa (10% Compression)
Length 2400mm
Material Bio-enhanced PIR Rigid Foam
Pack Coverage 8.64m2
Profile Square Edge
R-Value 0.13 W/m²K
Size 125mm x 1200mm x 2400mm
Thermal Conductivity 0.020 W/mK
Thickness 125mm
Width 1200mm
Fire Classification NPD
Building Regulations Compatible
Coverage 8.64m2
Finish Textured robust low emissivity foil facings
Quantity 3 sheets
Shipping method Articulated Vehicle ǀ Courier
Applications Underfloor Heating ǀ Suspended and Solid Floors
BBA Certified Yes
Vapour Control Layer Yes
Fixing method Fixings, Laid, Glued, Concrete Blinding
Foil faced Yes, textured robust low emissivity foil facings
ETA Notification Yes
Features Meets U-Values specified in the Building Regulations
Manufacturer Unilin Insulation®

Write a review

Note: HTML is not translated!
Bad Good

We deliver insulation materials to Mainland UK only. Deliveries to Highlands, Northern Ireland, Isle of Wight etc.. might be possible at additional cost.
We offer free delivery on most of the orders above £300 (excluding VAT) (except special products - shipping cost via courier - products marked ''Request A Quote'')

Delivery of some insulation materials might be extended due to the current situation (Covid-19, stock shortages, allocations).
If you need materials quickly please contact us - we will do our best to help you source materials needed.

We do not deliver on weekends and bank holidays. Sometimes we can deliver on Saturdays - please check with us before placing the order.
If you need any further information please contact us tel. 02081910776

We can help to calculate price per m2 or linear meter (one meter in length) cost, please just contact us via phone 02081910776, email or live chat. Alternatively, you can work it out yourself quickly and easily: to get cost per meter square please divide price shown in orange area by ''Required area (m2)'' Example price of £28.80 divided by board coverage 2.88m2 = cost of £10.00 per m2.

INSTALLERS

No matter whether you choose a local installer or a national company, there’s a few tips to help you find the right installer for your home insulation improvements, such as asking for recommendations and making sure that they’re part of a certification scheme. This makes sure that they have the right skills and standards of workmanship to carry out the installation, and you can be sure that they know exactly what they are doing.

4 TIPS FOR CHOOSING THE BEST INSULATION INSTALLER

1. Thermal inspection picture in portfolio

It’s worth seeing a installer’s previous work. There’s no harm asking if you can see any properties nearby that they’ve installed insulation in. Best way would be to see Infrared Thermal Imaging Inspections. Thermal cameras spot small, but key changes in temperature in different areas of a house, identifying problematic areas that the human eye never could and some that a visual inspection could only hypothesize.

2. Reviews

Along with checking recommendations and previous work, finding reviews online can often be a great way to find out if they provide a good service or not. However, it’s best not to solely rely on reviews you may find or review websites, as there’s no controlling who writes them.

3. Compare prices

Comparing prices will also ensure companies can’t take advantage of you and give you a fair price. 

4. Word of Mouth

The best way to find a great insulation installer is through recommendations. Make sure you ask friends and family. They will most likely give you their honest opinion and can tell you from first hand experience.

 

Whether you require a wall, cladding, external wall, loft or floor insulation fitted, you can find and hire your local insulation installers from popular UK web pages. A simple internet search will return thousands of potential installers near your area.

 

https://www.nia-uk.org/find-an-installer/

https://www.checkatrade.com/

https://www.mybuilder.com/

https://www.ratedpeople.com/local-thermal-insulation

 

STOCKIST

We are the stockist of construction materials and related products for both trade and DIY from most recognizable brands in the UK like Cordek, RCM, Promat, Rockwool, Isover, Celotex, Xtratherm, Ursa, Low-E, Cedral, Kingspan, Dufaylite, British Gypsum, K-rend, Ecotherm, Iko enertherm, Kay-Metzeler, Terrawool to allow you to complete your insulation job on time at competitive prices and the highest standards.

 

Whether you are a large company or a DIYer, if you need a large amount of insulation materials, we can offer quantity discounts at the best prices. Please contact us and our friendly customer service will try to find the best and cheapest solutions for you. We value your time and we will try to deliver the products as soon as possible at a reasonable price to your construction site or house. The UK's leading insulation supplier near you and your needs. Price List available upon request.
125mm Unilin ECO/MA Solid and Suspended Floor Board (pack of 3)
125mm Unilin ECO/MA Solid and Suspended Floor Board (pack of 3)
£ 635.88