Largely manufactured from recycled glass (e.g. windscreens) and mineral base materials such as sand and without the use of binding agents. The ingredients are melted into molten glass, which is cooled and crushed into a fine powder. The powdered glass is poured into molds and heated (below the melting point) in a "sintering" process that causes the particles to adhere to one another. Next, a small amount of finely ground carbon-black is added and the material is heated in a "cellulation" process. Here, the carbon reacts with oxygen, creating carbon dioxide, which creates the insulating bubbles in the (material). CO2 accounts for more than 99% of the gas in the cellular spaces.
Cellulose insulation is a material made from recycled newspaper. The paper is shredded and inorganic salts, such as boric acid, are added for resistance to fire, mould, insects and vermin. The insulation is installed either blown or damp-sprayed depending on application.
Wood fibre
The success of wood fibre insulation derives from an attractive environmental profile combined with a whole bag of functions including rigid insulation, sheathing and sarking for timber frames, roofs and flooring as well as flexible insulation for studs and rafters.
Wood of course is renewable, it sequesters carbon during its growth and product production is relatively free from pollution. The insulation value of wood fibre boards is not as dimensionally efficient as some of the orthodox petro-chemical materials - but it's no slouch either - typically coming in with a 'k value' range of between 0.038-0.043 W/mK depending on format.
Hemp
Hemp fibres are produced from hemp straw of the hemp plant. Most hemp is imported, but an increasing amount of home-grown crop is becoming available. Hemp grows up to a height of nearly 4 metres within a period of 100-120 days. Because the plants shade the soil, no chemical protection or toxic additives are required for hemp cultivation. The product is composed of, usually, 85% hemp fibre with the ballance made up of polyester binding and 3-5% soda added for fire proofing.
Straw
Straw is an agricultural by-product, the dry stalks of cereal plants, after the grain and chaff have been removed. Straw makes up about half of the yield of cereal crops such asbarley, oats, rice, rye and wheat.
Fischer DIPK 8/20-40 Render Only Fixing (boxed in 200's) is a drive anchor consisting of a white fixing sleeve with an integrated plate and a glass-fibre reinforced plastic nail used in render-only EWI systems.
Render Only Fixings Fischer DIPK 8 are suitable for a wide range of building materials..
100mm Knauf Earthwool Loft Roll 44 Combi-Cut is a flexible highly-durable non-combustible glass mineral wool loft insulation roll manufactured using Knauf ECOSE Technology with Euroclass A1 reaction to fire classification used for insulation between and over the joists in cold lofts where pitched ro..
100mm Unilin ECO/MA 360 Floor Insulation is a bio-enhanced, superior performance PIR rigid foam insulation board suitable for underfloor heating, solid and suspended floors.
It is lightweight, easy to install and combines high compressive strength with low thermal conductivity, providing a high p..
Unilin ECO/MA 360 Premium Floor PIR Insulation Board (Floorboard)
High performance - Thermal conductivity (lambda value) of 0.020 W/mK
100mm Unilin ECO360 meets U-Values specified in the Building Regulations
RIBA/RIAI Climate Challenge 2030, LETI Standards, Future Homes Hub targets
Bio-enhanced board will significantly improve the U-Value of new and existing floors
100mm Unilin ECO/MA 360 Roof Insulation is a bio-enhanced, superior performance PIR rigid foam insulation board suitable for sloped roofs (ventilated, hybrid or warm roof).
Using pioneering environmentally conscious technology, ECO360 MA in roof applications will reduce heat loss while also deliv..
100mm Unilin ECO/MA 360 Bio-enhanced Roof PIR Insulation Board
High performance - Thermal conductivity (lambda value) of 0.020 W/mK
Unilin ECO360 Roofs meets U-Values specified in the Building Regulations
RIBA/RIAI Climate Challenge 2030, LETI Standards, Future Homes Hub targets
Bio-enhanced board will significantly improve the U-Value of new and existing roofs
100mm Unilin ECO/MA 360 (Sarking) Pitched Warm Roof Insulation is a bio-enhanced, superior performance PIR (polyisocyanurate) rigid foam insulation board suitable for pitched roofs.
Unilin Sarking Warm Roof Construction Board has the strength and thermal properties required to reach the high perf..
100mm URSA 10 Diverso Loft Insulation Roll is a lightweight easy to install, non-combustible, unfaced glass mineral wool loft insulation roll used as a loft insulation in cold pitched roofs.
URSA 10 Glass Mineral Wool Insulation Roll 100mm is perforated to allow it to be split into either 2 x 570..
100x225x1200mm Hyfloor Strip Foundation System Unilin XT/HYF is an engineered floor insulation used to achieve Future Homes Standard and passive floor performance.
The Hyfloor Strip Foundation System provides effective insulation that has been detailed and installed professionally at the initial ..
100x225x1200mm Hyfloor Strip Foundation System Unilin XT/HYF
Engineered floor insulation with high performance foundation riser panels
Used to achieve Future Homes Standard and passive floor performance
Hyfloor System that provides thermal performance and robust detailing
Suitable for use with built-in full fill and partial fill wall insulation
10mm Grey EPS for External Wall Insulation (Graphite Expanded Polystyrene) is an insulating material with about 20-25% better thermal insulation properties than basic white EPS that can effectively reduce heating costs and improve the appearance of the building.
Complete external wall insulation ..
External Wall Insulation Systems
Lightweight - Cost efficient - Durable
High Resistance to Mold Growth
Thermal Conductivity: 0.031W/mK
Easily cut with a sharp knife to any size and shape
110mm Celotex XR4000 PIR Insulation Board (XR4110) is an easy to cut and install multi-purpose polyisocyanurate rigid foam insulation board featuring a low emissivity foil facings that is suitable for floor, wall, roof and ceiling cut-to-fit applications.
Celotex Insulation Board is an excellent ..
110mm Unilin ECO/CT CavityTherm 360 is an engineered full fill cavity insulation system providing added resilience against increases in wind-driven rain resulting from climate change.
When built into a traditional 110-150mm cavity using standard foundation widths and local building materials ECO/..
110mm CavityTherm ECO/CT Unilin Full Fill Cavity Insulation Board
Unilin ECO/CT 360 (CavityTherm) achieves U-Values down to 0.12 W/m2K
Lambda value of 0.020 W/mK with pioneering environmentally sensitive features
Minimising the threat of Thermal Bridging and improving the U-Value of the wall
Meets both the Climate Challenge 2030 and Low Energy Transformation Initiative
110mm Fire Rated Fixing MLN (diameter 8mm) is an universal metal façade fixing with high corrosion resistance used for Rainscreen Insulation in Ventilated Cladding Systems to fix and secure insulation panels.
MLN Fire Rated Fixings are suitable for mineral wool (MW) boards, glass wool, lightweigh..
110mm x 8mm Fire Rated Fixing MLN (pack of 50 fixings)
Universal metal façade fixing with high corrosion resistance
For Rainscreen Insulation in Ventilated Cladding Systems
For fixing and securing insulation panels (substrates: A, B, D, E)
115mm Metal Pin Insulation Board Screw Fixing is a plastic body fixing with metal pin, used to fix the thermal insulation boards to the wide range of substrates like concrete, brick and other blockwork in an External Wall Insulation (EWI) system.
WKTHERM metal mechanical fixing 115mm is made from..
115mm Metal Pin Insulation Board Fixings
Metal screw with plastic bodies
Keeps the thermal bridging down to a minimum
Drill the hole, Mount the fastener and Hammer in the metal pin
For substrates: Concrete, Brick and other Blockwork
115mm RAWLPLUG R-TFIX-8S Metal Screw Fixing (box of 200) is a highly durable, versatile screw-in facade fixing that offers quick, easy and precise installation in all substrates (categories A, B, C, D and E) with its unique sleeve compression zone.
Metal Screw Fixing 115mm is designed for Externa..
115mm RAWLPLUG (R-TFIX-8S)
Quick and easy installation
Unique sleeve compression zone
Easy installation in all substrates (categories A, B, C, D, E)
External Thermal Insulation Composite Systems (ETICS)
12.7mm Promat PROMATECT®-MST Fire Resistant Board is a rigid non-combustible insulation board specifically formulated without asbestos and mineral fibres used as a thermal break in process plants and as single skin insulation in ovens and dryers.
Fire Protection Board Promatect-MST 12.7mm is an e..
Promat PROMATECT®-MST A1 Fire Resistant Board 12.7mm
Effective and stable fire insulation solution for demanding applications
Good rigidity properties even when exposed to high temperatures of 1000ºC
Rigid fire insulation board with up to 240 minutes fire resistance (protection)
12mm Celotex TB4000 PIR Insulation Board (TB4012) is an easy to cut and install multi-purpose polyisocyanurate rigid foam insulation board featuring a low emissivity foil facings that is suitable for floor, wall, ceiling and roof cut-to-fit applications.
Celotex Board is an excellent high-perform..
12mm Promat PROMATECT®-250 is a mineral bound lightweight calcium-silicate fire protection board made with PROMAXON® technology, used for the fire protection of structural steel ‘H’ or ‘I’ shaped beams and columns and mezzanine floors.
Promat PROMATECT 250 is a 2500mm long by 1200mm wide calcium ..
12mm Promat PROMATECT 250 Fire Protection Board
A1 non-combustible low density calcium-silicate insulation board
PROMATECT®-250 is made with special PROMAXON® technology
Used for protection of steel structures and mezzanine floors
Provides up to 150 minutes fire protection to structural steelwork
15mm PIR Rigid Insulation Board Xtratherm (Unilin) 1200mm x 1200mm is a thinnest rigid foil faced polyisocyanurate (PIR) thermal foam insulation board designed for roofs, walls, floors, timber and steel framed systems.
Unilin (Xtratherm) PIR insulation boards are stable, rot proof and will remain..
1200mm x 1200mm x 15mm
Foil Faced PIR Rigid Foam Insulation Board
Certified thermal conductivity as low as 0.022W/mK!
15mm Promat PROMATECT-XW is an A1 non‑combustible and moisture resistant Fire Protection Board used for the protection of structural steel giving up to 60 minutes fire protection to structural steel columns and beams.
PROMATECT-XW is used to provide one, two, three or four sided encasements to: c..
15mm Promat PROMATECT-XW A1 Fire Protection Board
Fully tested at limiting temperatures from 300ºC to 650ºC
60 minutes fire protection to structural steel columns and beams
Thinner solution in comparison with other fire‑resistant constructions
Quick, easy to cut and install saving time and reducing installed cost
15mm Unilin XT/PR Thin-R Pitched Roof PIR Insulation Board is a thinnest PIR rigid thermal foam insulation board used in roof construction to achieve Future Home and Passive House Standards.
XT/PR Unilin PIR Board is a high performance foil faced rigid insulation foam with a certified thermal con..
15mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
15mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
15mm Unilin XT/TF Thin-R Timber Frame Insulation Board is a thinnest PIR rigid thermal foam insulation board used in wall construction to achieve Future Home and Passive House Standards.
XT/TF Unilin PIR Board is a high performance foil faced rigid insulation foam with a certified thermal conduct..
15mm Unilin XT/UF Thin-R Floor Insulation Board is a thinnest PIR rigid thermal foam insulation board used in floor construction to achieve Future Home and Passive House Standards.
XT/UF Underfloor Unilin PIR Board is a high performance insulation with a certified thermal conductivity of 0.022W/m..
15mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
15mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
15mm Unilin (Xtratherm) Thin-R Insulation Board (2400mm x 1200mm x 15mm) is an ultra thin rigid foil faced polyisocyanurate (PIR) thermal foam multi-application insulation board designed for roofs, walls, floors, timber and steel framed systems.
Xtratherm (Unilin) Thin-R range is a high-efficienc..
20mm Aluminium Base Track is a high-quality resistant to corrosion and atmospheric factors baserail profile designed for external wall insulation systems and thin coat rendering.
Base Bead is used in EWI systems as a cover for the lower part of the thermal insulation material of Expanded Polystyr..
20mm Aluminium Vented Base Track Timber Frame is a high-quality resistant to corrosion and atmospheric factors ventilated profile designed for external wall insulation systems and thin coat rendering as a cover for the lower part of the thermal insulation boards: Expanded Polystyrene (EPS), Kingspan..
20mm Aluminium Vented Base Track SF is a high quality resistant to corrosion and weather conditions ventilated profile designed for External Wall Insulation (EWI) systems and thin coat rendering.
Ventilated Base Track 20mm is used in insulated render systems as a cover for the lower part of the 2..
20mm White EPS External Wall Insulation Board (EPS70) is an easy to handle and install Expanded Polystyrene Insulation material used as a main component of external wall insulation systems and thin coat rendering.
White EPS (Polystyrene) 20mm is a lightweight basic insulation material available a..
External Wall Insulation Systems - EWI
Easily cut with a sharp knife to any size and shape
20mm Kingspan ThermaFloor TF70 Floor Board is a fibre-free rigid thermoset foam insulation board used to insulate solid concrete, suspended ground floors and for use with underfloor heating systems.
Thermafloor TF70 Kingspan is a high performance flooring insulation suitable for use below the scr..
Thermal conductivity of 0.022 W/mK
Easy to handle and install
BBA Certificate 14/5133
NSAI Agrément Certificate 03/0196
INSULATION FOR SOLID CONCRETE AND SUSPENDED GROUND FLOORS
Kingspan ThermaPitch TP10 Board 20mm is a high performance pitched roof insulation board with fibre-free rigid thermoset PIR foam core used for under rafter or between and over joist applications.
20mm Thermapitch TP10 Kingspan PIR 2400mm x 1200mm board is an insulation sheet suitable for tiled o..
Thermal conductivity of 0.022 W/mK
Easy to handle and install
BBA Certificate 14/5133
NSAI Agrément Certificate 03/0196
INSULATION FOR TILED OR SLATED PITCHED WARM ROOF SPACES
20mm Kingspan Thermawall TW55 Insulation Board is a rigid insulation board used between studs or as an insulating sheathing material for steel and timber framing wall applications.
Thermawall TW55 Kingspan is a high performance insulation board suitable for use with timber frame and steel frame w..
20mm Kingspan Kooltherm K5 Wall Board is a high-performance masonry wall insulation board, with a fibre-free rigid thermoset phenolic core used for external wall insulation behind traditional, lightweight thin coat rendering and dry cladding systems.
Kooltherm K5 External Wall Board 20mm is a pre..
20mm Kooltherm K5 Kingspan External Wall Board
Certified Thermal Conductivity of 0.022 W/mK
Fire Rating (Reaction to Fire) Euroclass C-s2,d0
Resistant to the passage of Water Vapour
For use behind traditional and lightweight polymer Renders
20mm Lamella Mat (45kg/m3) is manufactured from non-combustible mineral wool faced with aluminium foil used for heating pipe, ventilation pipe, duct work, air ducts and water or oil storage vessels.
HVAC Lamella Mat is manufactured with a density of 45kg/m3 with excellent fire performance, classi..
20mm Foil Faced Mineral Wool Roll (Density 45kg/m3) Lamella Mat A1
A1 class non-combustible mineral wool roll faced with aluminium foil
Used for heating and ventilation pipes, ducts and water/oil storage vessels
Acoustic, thermal and fire insulation (anti condensation and anti moisture)
Help to prevent condensation from forming on the pipes and ducts
20mm Lamella Mat (60kg/m3) is manufactured from non-combustible mineral wool faced with foil used for heating pipe, ventilation pipe, duct work, air ducts and water or oil storage vessels.
60kg Density Foil Backed Lamella Mat is a high performance insulation which provides acoustic, thermal and f..
20mm Foil Faced Mineral Wool Roll (Density 60kg/m3) Lamella Mat A1
A1 class non-combustible mineral wool roll faced with aluminium foil
Used for heating and ventilation pipes, ducts and water/oil storage vessels
Acoustic, thermal and fire insulation (anti condensation and anti moisture)
Help to prevent condensation from forming on the pipes and ducts
20mm Promat VERMICULUX-S is an A1 class non-combustible calcium silicate board which provides up to 240 minutes fire protection for buildings storing high value items or assets, including museums, data centres and bonded warehouses.
VERMICULUX-S is used to protect one, two, three or four sided en..
20mm Stylite Plustherm Grey EPS EWI 70 External Wall Insulation Board is a high performance thermal insulation board manufactured from Expanded Polystyrene (EPS), used in External Wall Insulation (EWI) systems to meet Building Regulations for thermal performance.
Stylite Expanded Polystyrene Insu..
21mm Xtratherm FR/TP Thin-R Thermal Ply Composite Board for Flat Roof is an insulated panel consist of PIR (polyisocyanurate) core with a composite foil facings, bonded to 6mm WBP grade plywood designed for new and refurbishment flat roofs.
FR/TP PIR and Plywood For Flat Roof is a three-in-one so..
21mm Unilin FR/TP Warm Roof Insulation Decking is an insulated panel made of 15mm PIR rigid foam insulation core bonded to 6mm WBP grade plywood used for new and refurbishment flat roof applications.
Unilin FR/TP Thermal Ply Flat Roof Insulation Board is faced to the under side with a gas-tight f..
24.5mm (15mm) Unilin XT/TL Insulated Plasterboard is made of 15mm Unilin PIR insulation core bonded to 9.5mm plasterboard used for internal walls, ceilings, pitched and flat roof applications.
Unilin XT/TL Insulation and Drylining Board provides an effective vapour control layer and is suitable..
15mm Unilin PIR insulation core bonded to 9.5mm plasterboard
Used for internal walls, ceilings, pitched and flat roof applications
Suitable for a variety of wall types for both refurbishment and new build
Unilin XT/TL thermal laminate incorporates an integral vapour barrier
Improves energy efficiency of your home by reducing energy costs
24.5mm Unilin XT/TL-MF (Mech Fix) is a foil backed insulated plasterboard made of 15mm Unilin PIR insulation core bonded to 9.5mm plasterboard used for internal walls, sloped roofs and ceilings.
The composite foil facing on Unilin XT/TL-MF Insulation and Drylining Board provides a gas and vapour ..
24.5mm Xtratherm XT/TL Thermal Liner Composite Insulated Plasterboard Dot & Dab is an insulated panel combined of polyisocyanurate (PIR) rigid insulation foam core bonded to 9.5mm or 12.5mm tapered edge plasterboard that is suitable for internal applications, fixed with adhesive dot and dab direct b..
24.5mm Xtratherm Thin-R XT/TL-MF Thermal Liner Mech Fix is an insulated panel combined of PIR rigid insulation foam core bonded to 9.5mm plasterboard suitable for internal masonry walls, sloped rafters and ceilings.
Xtratherm XT/TL-MF Mechanically Fixed Drylining Board is a highly versatile and d..
Provides Effective Vapour Control Layer
Reducing Energy Consumption and Costs
For a Variety of Wall Types - Internal Walls, Sloped Roofs, Ceilings
Insulation & Drylining in one Application - Refurbishment & New Build
XT/TL-MF is only suitable for mechanically fixed applications
24mm Plydeck Xtratherm (PIR with OSB Board) Flat Roof Insulation Decking is a three-in-one solution designed to provide decking, vapour control layer and high levels of thermal insulation in one easy applicable flat roof product.
Xtratherm Plydeck is a composite board of enhanced PIR (polyisocyan..
25mm URSA Acoustic Partition Insulation Roll APR is a lightweight non-combustible glass mineral wool insulation, offering high level of sound absorption and noise reduction in timber or metal framed internal partition walls, timber or metal framed separating walls and timber separating floors.
UR..
25mm Black Foil Faced Two Sides Knauf RS45 Slab is a semi rigid rock mineral wool black foil backed on both sides insulation slab with an excellent class A1 fire performance.
Knauf RS45 Black foil backed on both sides slab provides outstanding fire, thermal and acoustic performance for both new b..
25mm Black Foil Faced x2 Sides Knauf RS45 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 45kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (x2 Foil Faced RS45)
Double Sides Black Foil Faced Slab accumulates heat on one side of the slab
25mm Knauf RS60 Black Foil Backed Two Sides Slab is an insulation solution specially designed for concrete soffits, an A1 class non-combustible rock mineral wool slab.
Black foil backed and faced 60kg density insulation slab is less visible than the silver foil which is handy specially during the..
25mm Black Foil Faced x2 Sides Knauf RS60 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 60kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (x2 Foil Faced RS60)
Double Sides Black Foil Faced Slab accumulates heat on one side of the slab
25mm Black Foil Faced Knauf Rocksilk RS45 Insulation Slab is a non-combustible rock mineral wool black foil backed insulation slab with an excellent class A1 fire performance.
Knauf RS45 1200mm x 600mm x 25mm black foil backed slab provides outstanding fire, thermal and acoustic performance for b..
25mm Black Foil Faced Knauf Rocksilk RS45 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 45kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (Foil Faced RS45)
Black Foil Faced Insulation Slab accumulates heat on one side of the board
25mm Aluminium Black Foil Backed Knauf RS60 60kg Slab is a rigid class A1 non-combustible rock mineral wool insulation slab faced with a reinforced black aluminium foil.
The black aluminium foil faced insulation slab accumulates heat on one side of the board, unlike the aluminium silver foil that..
25mm Black Foil Faced Knauf Rocksilk RS60 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 60kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (Foil Faced RS60)
Black Foil Faced Insulation Slab accumulates heat on one side of the board
Knauf RS60 Black Tissue Faced 2 Sides Insulation Slab is a 25mm thick fire and acoustic rock mineral wool insulation slab, used for providing fire resistance and thermal insulation for roofs, concrete car park soffits and similar applications.
Rocksilk RS60 Slab (25mm x 600mm x 1200mm) faced with..
Black Tissue Faced 2 Sides Knauf Rocksilk RS45 Insulation Slab is a 25mm thick rock mineral wool based, class A1 non-combustible insulation slab, used for structural elements such as roofs, concrete car park soffits and similar applications.
The black tissue facings on two sides helps to avoid th..
25mm Black Tissue Faced 2 Sides Knauf RS45 Insulation Slab
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Provides from 30 minutes up to 240 minutes fire protection
Density 45kg/m3 Thermal conductivity (lambda) of 0.035W/mK
Used for structural elements such as concrete car park soffits
25mm Black Tissue Faced Knauf RS45 Insulation Slab is a rock mineral wool based, class A1 non-combustible insulation slab, used for structural elements such as roofs, concrete car park soffits and similar applications.
Rocksilk RS45 is a high-efficiency insulation slab with a certified lambda val..
25mm Black Tissue Faced Knauf Rocksilk RS45 Insulation Slab A1
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Provides from 30 minutes up to 240 minutes fire protection
Density 45kg/m3 Thermal conductivity (lambda) of 0.035W/mK
Used for structural elements such as concrete car park soffits
25mm Celotex CW4000 Partial Fill Cavity Wall Insulation Board (CW4025) is an easy to install PIR (polyisocyanurate) rigid insulation board, featuring a low emissivity foil facings with excellent thermal conductivity of 0.022 W/mk that is suitable for partial fill masonry cavity wall applications.
..
25mm Double Sided Aluminum Foil Slab Rockwool RW5 (100kg) is a foil faced on both sides stone wool resin bonded slab developed to prevent the spread of flames and inhibit heat and smoke through concealed spaces in buildings.
Rockwool RW5 Foil Faced Two Sides Fire Barrier Slab 25mm x 600mm x 1200m..
25mm Double Sided Foil Faced Fire Slab Rockwool RW5
100kg density - Foil Faced on Both Sides Fire Barrier Slab
Developed to prevent the spread of flames and inhibit heat
Conform with the Building Regulations Approved Document B
Excellent fire performance classified as Euroclass A1 | Class 'O'
25mm Foil Faced on Both Sides Rocksilk RS45 Knauf Fire Insulation Slab is a standard density (45kg/m3) non-combustible rock mineral wool two-sided foil-faced slab with a great fire performance (Class A1) suitable for use in multiple applications.
Knauf RS45 1200mm x 600mm x 25mm double sided alum..
FOIL FACED BOTH SIDES Slab - FFx2
Class ‘O’ to the Building Regulations - Euroclass A1
Density: 45kg/m3 - Excellent thermal and acoustic properties
Class 1 Surface Spread of Flame - Non-combustible - Odourless, Rot Proof, Non-Hygroscopic
Durability: do not sustain vermin and will not encourage the growth of fungi, mould or bacteria.
25mm EcoTherm EcoVersal PIR Insulation Board 5 in 1 Solution is a universal multi-purpose fibre free rigid polyisocyanurate insulation core faced with an aluminium foil composite on both sides designed for insulating pitched roofs, floors, walls, ceilings and dormer cheeks.
Ecotherm Eco-Versal 24..
25mm EPS 70 Expanded Polystyrene Kay-Metzeler Kay-Cel Flooring Insulation Board is a universal cost-effective, long lasting, thermally efficient and completely CFC and HCFC free standard eps insulation board suitable for multiple applications primarily used in residential buildings.
Kay-Metzeler ..
8ft by 4ft sheets (8' x 4')
Compressive Strength: <70kPa
Suitable above a concrete slab or a precast concrete
EPS70 is rot proof - unaffected by bacteria moulds or fungi
EPS70 is Moisture resistant - non irritant and odourless non-toxic
25mm Expanded Polystyrene EPS70 Jablite Jabfloor Insulation Board is an economical, long lasting, thermally efficient, easy to cut and install universal EPS insulation board suitable for insulating floors, walls and roofs.
Expanded Polystyrene EPS 70 25mm is an excellent permanent insulating mate..
8ft by 4ft sheets (8' x 4')
Compressive Strength: <70kPa
Suitable above a concrete slab or a precast concrete
EPS70 is rot proof - unaffected by bacteria moulds or fungi
EPS70 is Moisture resistant - non irritant and odourless non-toxic
25mm EPS70 Polystyrene Insulation Board Stylite is a cost-effective, quick and easy to install thermally efficient standard EPS insulation board which will remain effective for the life span of the building.
Stylite SPI Expanded Polystyrene Insulation Board 25mm is suitable above a concrete slab ..
25mm Foil Backed Double Sided Insulation Slab RW3 (11.52m²/pack) is an aluminium foil faced on both sides stone wool resin bonded slab developed to prevent the spread of flames and inhibit heat and smoke through concealed spaces in buildings.
Rockwool RW3 Foil Faced Two Sides Fire Barrier Slab 25..
Double Sided Foil Facing Fire Slab Rockwool RW3 - 25mm
Aluminium Foil Faced on Both Sides Fire Barrier Slab
Developed to prevent the spread of flames and inhibit heat
Conform with the Building Regulations Approved Document B
Excellent fire performance classified as Euroclass A1 | Class 'O'
25mm Foil Faced 1 Side Fire Insulation Slab Rockwool RW5 is a high performance foil faced fire and acoustic stone wool core insulation slab used where fire resistant walls need to be continued above a ceiling into the roof void.
Rockwool RW5 Foil Backed Slab is an A1 class, non-combustible alumin..
25mm Foil Faced 1 Side Insulation Slab Rockwool RW5
100kg density - Foil Faced on One Side Fire Barrier Slab
Developed to prevent the spread of flames and inhibit heat
Conform with the Building Regulations Approved Document B
Excellent fire performance classified as Euroclass A1 | Class 'O'
25mm Foil Faced Fire Slab Rockwool RW3 (11.52m² / pack) is a high performance foil faced fire and acoustic stone wool core insulation slab developed to prevent the spread of flames and inhibit heat and smoke through concealed spaces in buildings.
Rockwool RW3 Foil Faced Slabs (60kg per m3) are si..
Rockwool RW3 Foil Faced Fire Slab 25mm (60kg/m3)
Aluminium foil faced fire and acoustic stone wool slab
Developed to prevent the spread of flames and inhibit heat
Conform with the Building Regulations Approved Document B
Great fire performance classified as Euroclass A1 | Class 'O'
25mm Foil Faced Rocksilk RS100 Knauf Insulation Slab is a high-density (100kg/m3) non-combustible rock mineral wool foil backed rigid insulation slab with a great fire performance classified as Euroclass A1, suitable for use in multiple applications.
Knauf RS100 1200mm x 600mm aluminium foil slab..
25mm Foil Faced Rocksilk RS45 Knauf Insulation Slab is a standard density (45kg/m3) non-combustible rock mineral wool foil backed building slab with a great fire performance classified as Euroclass A1, suitable for use in multiple applications.
Knauf RS45 1200mm x 600mm foil backed slab provides ..
25mm Foil Faced Rocksilk RS60 Knauf Insulation Slab is a medium density (60kg/m3) non-combustible rock mineral wool foil backed building slab with a great fire performance classified as Euroclass A1, suitable for use in multiple applications.
Knauf RS60 1200mm x 600mm aluminium foil insulation sl..
25mm Foil Faced on Both Sides Rocksilk RS100 Knauf Insulation Slab is a high-density (100kg/m3) non-combustible rock mineral wool foil-faced two-sides rigid insulation slab with a great fire performance (Class A1) suitable for use in multiple applications.
Knauf RS100 1200mm x 600mm aluminium foi..
FOIL FACED BOTH SIDES Slab - FFx2
Class ‘0’ to the Building Regulations Euroclass A1
Density: 100kg/m3 Excellent thermal and acoustic properties
Class 1 Surface Spread of Flame Non-combustible
Provides excellent fire, thermal and acoustic performance.
25mm Foil Faced on Both Sides Rocksilk RS60 Knauf Fire Insulation Slab is a medium density (60kg/m3) non-combustible rock mineral wool foil-faced two-sides slab with a great fire performance (Class A1) suitable for use in multiple applications.
Knauf RS60 1200mm x 600mm aluminium foil insulation ..
FOIL FACED BOTH SIDES Slab - FFx2
Class ‘0’ to the Building Regulations - Euroclass A1
Density: 60kg/m3 Excellent thermal and acoustic properties
Class 1 Surface Spread of Flame - Non-combustible
Durability: will not encourage the growth of fungi, mould or bacteria.
25mm Xtratherm FR/ALU Flat Roof PIR Insulation Board Thin-R is a top-class polyisocyanurate foam core insulation board with vapour resistant gas-tight foil facers suitable for loose laid ballasted and mechanically fixed single ply waterproofing systems.
Thin-R FR/ALU is a thermally efficient roof..
BBA Certification No. 11/4817
Vapour resistant foil facers
Loose laid ballasted systems
Thermal Conductivity: 0.022W/mK
Compatible with mechanically fixed single ply systems
25mm Xtratherm Thin-R FR/MG Flat Roof Insulation is a high-quality polyisocyanurate foam core (PIR) insulation board with mineral coated glass facers designed for use below single ply fully adhered roof membranes, single ply waterproofing systems and partially bonded built-up felt.
Xtratherm Flat..
25mm Heavy Duty Full System Stop Bead with PVC Drip-Nosing is a perforated full system stop profile designed for External Wall Insulation (EWI) and thin coat rendering made from PPC Galvanised Steel used on the sides of insulated render systems as a cover for the thermal insulation boards: Expanded ..
Stop System - Galvanised Steel - PVC NOSE
FULL SYSTEM HEAVY DUTY STOP BEAD with Nose
Stop Track - Stop Rail - Stop Profile - Drip bead
External Wall Insulation Systems - Full Stop Bead
Provides additional protection against Abrasion and Corrosion
25mm Stainless Steel Full System Stop Bead with PVC Drip-Nosing is a special perforated full system stop profile designed for External Wall Insulation (EWI) and thin coat rendering made from resistant to corrosion and staining, low maintenance stainless steel.
The Stop T-Tracks are used on the si..
Stop System - PVC NOSE - STAINLESS STEEL TRACK
SS FULL SYSTEM HEAVY DUTY STOP BEAD with Nose
Stainless Steel: Stop Track - Stop Rail - Stop Profile with nose
External Wall Insulation System - Full Stop Bead Stainless Steel
Provides additional protection against Abrasion and Corrosion
25mm Galvanised Steel Heavy Duty Base Track with PVC Drip Bead 2500mm is a special full system starter profile designed for External Wall Insulation (EWI) and thin coat rendering made from PPC Galvanised Steel.
It is used in insulated render systems as a cover for the lower part of the thermal in..
BASE PROFILE - PPC GALVANISED - PVC NOSE
FULL SYSTEM HEAVY DUTY BASE BEAD with Nose
Base Track - Base Rail - Starter Profile - Drip bead
25mm Heavy Duty Base Track PPC is a starter profile for External Wall Insulation (EWI) systems and thin coat rendering made from polyester powder coated Galvanised Steel which is less expensive than stainless steel.
HD Base Track 25mm is used in insulated render systems as a cover for the lower p..
Heavy Duty Base Track with PVC Nosing Drip Bead 25mm is a professional full system starter profile specially designed for External Wall Insulation (EWI) and thin coat rendering made from resistant to corrosion and staining, low maintenance stainless steel.
It is used in insulated render systems a..
Premium Stainless Steel - PVC NOSE
FULL SYSTEM HEAVY DUTY BASE BEAD with Nose
Base Track - Base Rail - Starter Profile - Drip bead
External Wall Insulation Systems - Stainless Steel
Provides additional protection against Abrasion and Corrosion
25mm Kingspan Kooltherm K103 Floorboard is an advanced floor insulation board with a glass tissue facings designed for suspended floors, ground supported floors and underfloor heating systems (UFH).
Kingspan Kooltherm K103 25mm x 1200mm x 2400mm Flooring Board is an approved insulation with therm..
Kingspan Kooltherm K103 (previously K3)
Phenolic insulation thermal conductivity of 0.019 W/mK
Easy to handle and install - Non-deleterious material
25mm Kingspan Kooltherm K107 Pitched Roof Insulation Board is an advanced pitched roof insulation board with certified thermal conductivity of 0.019 W/mK across all thicknesses.
K107 Insulation Board is an ideal solution for insulating your roof and can be simply retrofitted when converting an at..
25mm Kingspan Thermaroof TR26 LPC/FM is a high performance PIR insulation board for flat roofs, fully compatible with most mechanically fixed single-ply waterproofing systems and green roof systems.
The Thermaroof® TR26 LPC/FM Boards are manufactured with Nilflam® technology, a high performance r..
25mm Kingspan TR26 Flat Roof PIR Rigid Insulation Board
TR26 Thermal Conductivity (lambda) as low as 0.022W/mK
Compatible with mechanically fixed single-ply waterproofing
High performance PIR Rigid Insulation board for flat roofs
Fully compatible with green roof systems (2400mm x 1200mm)
25mm Kingspan Thermaroof TR27 is a flat roof insulation board used on roofs waterproofed with fully-adhered, single-ply, partially-bonded, built-up felt, mastic asphalt or cold liquid applied waterproofing.
Kingspan TR27 is manufactured to the highest standards offering a thermal conductivity of ..
25mm Knauf Earthwool APR Acoustic Insulation Roll is a flexible and durable non-combustible glass mineral wool sound insulation roll which offers high level of sound absorption and noise reduction in internal wall, partitions and floor applications.
Knauf APR Sound Insulation Roll 25mm is manufac..
White Tissue Faced 2 Sides Knauf RS45 Insulation Slab is a 25mm thick rock mineral wool based, class A1 non-combustible insulation slab, used for structural elements such as roofs and concrete car park soffits.
25mm Rocksilk RS45 is a standard density (45kg/m3) insulation slab with a certified th..
25mm White Tissue Faced 2 Sides Knauf RS45 Insulation Slab
From 30 up to 240 minutes fire protection (1200x600x25mm slab)
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Density 45kg/m3 Thermal conductivity (lambda) of 0.035W/mK
Used for structural elements such as concrete car park soffits
25mm Knauf RS60 Black Tissue Faced Insulation Slab is an acoustic rock mineral wool based, class A1 non-combustible insulation slab, used for structural elements such as roofs, concrete car park soffits and similar applications.
Knauf Rocksilk RS60 is a medium density (60kg/m3) insulation slab wi..
Black Tissue Faced Knauf Rocksilk RS60 Insulation Slab A1 (25mm)
Density 60kg/m3 Thermal conductivity (lambda) of 0.034W/mK
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Provides from 30 minutes up to 240 minutes fire protection
Used for structural elements such as concrete car park soffits
25mm Rocksilk RS60 (Rock Mineral Wool Slab) Knauf Insulation Building Slab is a medium density (60kg/m3) non-combustible rock mineral wool unfaced slab designed for use in multiple applications with a great fire performance classified as Euroclass A1, which is the highest fire rating for non-combust..
Class 1 Surface Spread of Flame - Non-combustible
Class ‘O’ to the Building Regulations - Euroclass A1
Density: 60kg/m3 - Excellent thermal and acoustic properties
25mm Promat PROMASIL-1000L Fire Insulation Board 1000°C is a large-size, lightweight fire insulation board with very good thermal properties and thermal stability up to 1000°C, used in the fireplaces and stoves systems.
Promat PROMASIL-1000L Boards are often used in heavy industry for anode bakin..
25mm Promat PROMASIL-1100 SUPER Insulation Board 1050°C is a lightweight fire insulation board with very good thermal properties and thermal stability up to 1050°C, used in the fireplaces and stoves construction.
Promat PROMASIL-1100 SUPER Boards are suitable for multiple uses in single layer sys..
25mm Promat PROMASIL-1100 SUPER Insulation Board 1050°C
Fireplaces, Wood Burning Stoves, PROMAFOUR® fireplace systems
Very good thermal properties and thermal stability up to 1050°C
Extra low thermal conductivity calcium-silicate fire insulation board
Multiple uses in single layer systems for penetration seals in walls and slabs
25mm Recticel Eurothane General Purpose Insulation Board is an easy to cut and fit PIR rigid insulation board faced with a gas diffusion tight multilayer foil on both sides that is suitable for pitched roof, timber and steel framed walls, ceilings and floor applications.
Recticel Eurothane GP 240..
25mm Rocksilk RS100 Knauf (Rock Mineral Wool) Insulation Building Slab is a high-density (100kg/m3) non-combustible rock mineral wool unfaced rigid slab designed for use in multiple applications with a great fire performance classified as Euroclass A1, which is the highest fire rating for non-combus..
Class 1 Surface Spread of Flame - Non-combustible
Class ‘0’ to the Building Regulations - Euroclass A1
Density: 100kg/m3 Excellent thermal and acoustic properties
25mm Rocksilk RS45 Knauf Rock Mineral Wool Insulation Slab is a standard density (45kg/m3) non-combustible rock mineral wool building slab designed for use in multiple applications with a great fire performance classified as Euroclass A1, which is the highest fire rating for non-combustible material..
Class 1 Surface Spread of Flame - Non-combustible
Class ‘O’ to the Building Regulations - Euroclass A1
Density: 45kg/m3 - Excellent thermal and acoustic properties
25mm White Tissue Faced 2 Sides Rockwool Rockwool RW3 is a highly-durable class A1 fire resistant resin bonded wool insulation slab, used for structural elements such as roofs, concrete car park soffits and similar applications.
An unique white tissue facings on both sides helps to avoid the slab..
25mm Rockwool RW3 White Tissue Faced 2 Sides Insulation Slab
Strong A1 class, non-combustible fire resistant resin bonded slab
Provides from 30 minutes up to 240 minutes fire protection
Density 60kg/m3 Thermal conductivity (lambda) of 0.034 W/mK
For structural elements such as roofs, concrete car park soffits
25mm White Tissue Faced 1 Side Rockwool RW3 is a strong A1 class, non-combustible fire resistant resin bonded wool insulation slab, used for structural elements such as roofs, concrete car park soffits and similar applications.
This individual white tissue facing helps to avoid the slab edges fro..
25mm Rockwool RW3 White Tissue Faced 1 Side Insulation Slab
Strong A1 class, non-combustible fire resistant resin bonded slab
Provides from 30 minutes up to 240 minutes fire protection
Density 60kg/m3 Thermal conductivity (lambda) of 0.034 W/mK
For structural elements such as roofs, concrete car park soffits
25mm Black Tissue Faced Both Sides RW5 is a highly durable A1 class, non-combustible fire resistant resin bonded stone wool insulation slab, used for structural elements such as concrete car park soffits and similar applications.
Black Tissue Faced Both Sides Rockwool RW5 (Formerly ProRox® SL 960..
25mm Black Tissue Faced Rockwool RW5 is a highly durable A1 class, non-combustible fire resistant resin bonded stone wool insulation slab, used for structural elements such as concrete car park soffits and similar applications.
Rockwool RW5 Insulation Slab 25mm x 600mm x 1200mm with black tissue ..
25x600x1200mm Rockwool RW5 Black Tissue Faced Slab A1
Formerly ProRox® SL960 Thermal conductivity of 0.034W/mK
Used for structural elements such as concrete car park soffits
A1 class, non-combustible fire resistant stone wool insulation slab
Provides from 30 minutes up to 240 minutes fire protection
25mm White Tissue Faced 2 Sides Rockwool RWA45 is a strong non-combustible fire resistant resin bonded wool insulation slab, used for structural elements such as roofs, concrete car park soffits and similar applications.
White Tissue Faced Two Sides RWA45 (Formerly ProRox® SL 920) is a standard d..
25mm Rockwool RWA45 White Tissue Faced Two Sides Slab x2
Semi-rigid, A1 non-combustible fire resistant insulation slab
Provides from 30 minutes up to 240 minutes fire protection
Density 45kg/m3 Thermal conductivity (lambda) of 0.035W/mK
Used for structural elements such as concrete car park soffits
25mm White Tissue Faced Rockwool RWA45 is a tough A1 class, non-combustible fire resistant resin bonded wool insulation slab, used for structural elements such as roofs, concrete car park soffits and similar applications.
Rockwool RWA45 Insulation Slab 25x600x1200mm faced with white tissue on 1 s..
25mm Rockwool RWA45 White Tissue Faced One Side Slab x1
Semi-rigid, A1 non-combustible fire resistant insulation slab
Provides from 30 minutes up to 240 minutes fire protection
Density 45kg/m3 Thermal conductivity (lambda) of 0.035W/mK
Used for structural elements such as concrete car park soffits
25mm Knauf RS100 Insulation Slab Black Tissue Faced One Side is a rigid A1 class, non-combustible fire resistant insulation slab, used for structural elements such as roofs, concrete car park soffits and similar applications.
Knauf Rocksilk RS100 is a high density (100kg/m3) insulation slab with ..
25mm Knauf RS100 Black Tissue Faced 1 Side Insulation Slab A1
High density 100kg/m3 Thermal conductivity (lambda) 0.034W/mK
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Provides from 30 minutes up to 240 minutes fire protection
Used for structural elements such as concrete car park soffits
White Tissue Faced 1 Side Knauf RS100 Insulation Board 25mm is a rigid fire, thermal and acoustic class A1 insulation slab, used for structural elements such as roofs, concrete soffits and similar applications.
Rocksilk RS100 is a high density (100kg/m3) insulation slab with a certified thermal c..
25mm Knauf RS100 White Tissue Faced 1 Side Insulation Slab - 100kg
From 30 up to 240 minutes fire protection (1200x600x25mm slab)
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Density 100kg/m3 Thermal conductivity (lambda) of 0.034W/mK
Used for structural elements such as concrete car park soffits
25mm White Tissue Faced 1 Side Knauf RS45 Insulation Slab is a rock mineral wool based, class A1 non-combustible insulation slab, used for structural elements such as roofs, concrete car park soffits and similar applications.
The white tissue facing on one side helps to avoid the slab edges from ..
White Tissue Faced Knauf RS45 Insulation Slab 25x600x1200mm
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Provides from 30 minutes up to 240 minutes fire protection
Density 45kg/m3 Thermal conductivity (lambda) of 0.035W/mK
Used for structural elements such as concrete car park soffits
25mm RW3 Double Sided Black Tissue Faced Soffit Slab is a thermal, fire and acoustic insulation slab particularly suited for providing fire resistance and thermal insulation through concrete car park soffits and similar applications.
Black Tissue Faced Both Sides Rockwool RW3 (Formerly ProRox® SL..
Black Tissue Faced 2 Sides 25mm Insulation Slab Rockwool RW3
Soffit Slab for providing fire resistance and thermal insulation
Used for structural elements such as concrete car park soffits
A1 class, non-combustible fire resistant stone wool insulation slab
Provides from 30 minutes up to 240 minutes fire protection
25mm Rockwool RW3 Black Tissue Faced Soffit Slab is a strong rigid, 60kg density non-combustible fire resistant resin bonded stone wool insulation slab, used for structural elements such as concrete car park soffits.
Black Tissue Faced Rockwool RW3 (Formerly ProRox® SL 930) is a medium-density 60..
25mm Rockwool RW3 Black Tissue Faced Insulation Slab A1
A1, non-combustible fire resistant resin bonded stone wool
Provides from 30 minutes up to 240 minutes fire protection
Density 60kg/m3 Thermal conductivity (lambda) of 0.034W/mK
Used for structural elements such as concrete car park soffits
25mm Rockwool RW3 Acoustic Insulation Slab (Prorox SL930) is a robust, medium-density (60kg/m3) non-combustible resin bonded semi-rigid fire resistant insulation slab designed for use in floors, roofs at rafter level, partitions, ceilings, timber and steel frame walls.
Using RW3 Insulation in cei..
RW3 is rated Euroclass A1 non-combustible
Excellent thermal, acoustic and fire performance
RW3 insulation slabs achieve Lambda 0.034W/mK
RW3 is a robust insulation solution for a range of general building applications
Durable insulation solution which will maintain high performance over the lifetime of the building
25mm Rockwool RW5 Slab Acoustic, Fire and Thermal Insulation (Prorox SL960) is a strong, high-density (100kg/m3) non-combustible resin bonded rigid fire resistant insulation slab designed for use in floors, roofs at rafter level, partitions, ceilings, timber and steel frame walls.
Using Rockwool ..
RW5 is rated Euroclass A1 non-combustible
Excellent thermal, Acoustic (100kg density) and fire performance
25mm White Tissue Faced 1 Side Rockwool RW5 is a rigid A1 class, non-combustible fire resistant resin bonded stone wool insulation slab, used for structural elements such as roofs, concrete car park soffits and similar applications.
The white tissue facing on one side helps to avoid the slab edge..
25mm White Tissue Faced 1 Side Rockwool RW5 Insulation Slab
High-density 100kg/m3 and an excellent sound absorbing qualities
Provides from 30 minutes up to 240 minutes fire protection
Certified thermal conductivity (lambda value) of 0.034 W/mK
For structural elements such as roofs, concrete car park soffits
25mm Rockwool RWA45 Acoustic Insulation Slab (Prorox SL920) is a robust, standard density (45kg/m3) non-combustible resin bonded semi-rigid fire resistant insulation slab designed for use in floors, roofs at rafter level, partitions, ceilings, steel and timber frame walls.
Using RWA45 Acoustic In..
RWA45 is rated Euroclass A1 non-combustible
Excellent thermal, acoustic and fire performance
RWA45 insulation slabs achieve Lambda 0.035W/mK
RWA45 is a robust insulation solution for a range of general building applications
Durable insulation solution which will maintain high performance over the lifetime of the building
25mm Black Tissue Faced 2 Sides Insulation Slab Rockwool RWA45 is an A1 class, non-combustible fire resistant resin bonded stone wool insulation slab, used for structural elements such as concrete car park soffits.
Rockwool RWA45 Insulation Slab 25x600x1200mm with black tissue on 2 sides can prov..
Black Tissue Faced 2 Sides 25mm Rockwool RWA45 Insulation Slab
Class A1, non-combustible fire resistant resin bonded stone wool slab
Density of 45kg/m3 and thermal conductivity (lambda) of 0.035W/mK
Black tissue on 2 sides can provide from 30min up to 240min fire protection
For structural elements such as concrete car park soffits and similar applications
25mm Single Board Kingspan Kooltherm® K5 Insulation is an advanced external wall insulation board for masonry walls, with a fibre-free rigid thermoset phenolic core, used for external wall insulation systems and thin coat rendering.
The K5 boards are suitable for use behind traditional and lightw..
Single Board 25mm Kingspan Kooltherm K5 External Wall Insulation
600mm x 1200mm Kooltherm K5 Thermal conductivity 0.022W/mK
Used for external wall thermal insulation systems, thin coat rendering
Perfect solution for buildings that can’t be insulated on the inside
The thinnest commonly used External Wall Insulation (EWI) Board
25mm Xtratherm Safe-R SR/PR Pitched Roof Insulation Board is a high-class rigid phenolic foam insulation board with a low emissivity foil facings designed for pitched roofs, sloped roofs, ventilated roofs, hybrid roofs and warm roofs.
Xtratherm SR/PR range is a BBA certified high-efficiency therm..
BBA Certification No. 10/4803
Thermal Conductivity: 0.021W/mK
Reaction to Fire Euroclass B-s1, d0
Reduced Thermal Bridging and Risk of Condensation
Lightweight and Easy to Install - Superior Performance Phenolic Insulation
25mm Xtratherm Safe-R SR/UF Floor Insulation Board is a top-class rigid phenolic foam insulation board with a low emissivity aluminium foil facings designed for ground supported floors, suspended floors and underfloor heating (UFH).
Xtratherm SR/UF range is a BBA certified high-efficiency thermal..
25mm Unilin FR/ALU Thin-R Flat Roof Insulation Board comprising a rigid polyisocyanurate (PIR) insulation board with a composite gas-tight foil facings on both sides.
Flat Roof Board FR/ALU is used as a thermal insulation and to create or improve falls on limited access concrete, timber or metal ..
25mm Unilin FR/ALU Thin-R Flat Roof PIR Insulation Board
Rigid PIR Insulation Board with a gas-tight foil facings on both sides
Used as a thermal insulation on timber or metal flat roof decks
High Performance Board used in conjunction with a vapour control layer
Used with a single-ply mechanically fixed roof waterproofing membrane
The 25mm Unilin Thin-R FR/BGM Flat Roof Insulation Board is faced with a polypropylene fleece finished bitumen glass-fibre working surface and a mineral glass facing to the underside.
FR/BGM boards are suitable for use with most bitumen based, partially bonded waterproofing systems typically incl..
Unilin FR/BGM Flat Roof Insulation Board 25mm x 600mm x 1200mm
Faced with a polypropylene fleece finished bitumen glass-fibre working surface
Faced with a mineral glass facing to the underside insulation board surface
Used for partially bonded torched-on built-up bituminous felt systems
Can be used as a cheaper alternative to Celotex and Kingspan TR24 Insulation
25mm Unilin Flat Roof FR/MG is a high performance Polyisocyanurate with mineral coated glass facers suitable for use below single ply waterproofing systems and partially bonded built-up felt.
FR/MG Insulation Board for use as a thermal insulation layer and to create or improve falls on limited ac..
25mm x 600mm x 1200mm Unilin FR/MG Flat Roof Insulation Board
High Performance PIR Insulation Board with mineral coated glass facers
For concrete, timber or metal flat roof decks in domestic and non-domestic buildings
Used below single ply waterproofing systems and partially bonded built-up felt
Can be used as a cheaper alternative to Celotex and Kingspan Therma Roof Insulation
25mm Unilin SR/PR Safe-R, a rigid phenolic foam insulation board with a composite foil-facing on both sides, for use in warm pitched roofs in new and existing domestic and non-domestic buildings.
Safe-R Pitched Roof Unilin SR/PR on sloped roofs (ventilated, hybrid or warm roofs) provides the most..
25mm Unilin Thin-R XT/CW PIR Cavity Insulation Board is used in traditional masonry walls, built to the highest thermal standards whilst maintaining a residual cavity, offering protection from wind driven rain.
Unilin Cavity Wall (T&G) tongue and groove jointing offers a practical onsite solution..
25mm Unilin Thin-R XT/CW Partial Fill Cavity Wall Insulation Board
Reduced the Thermal Bridging and improved the U-Value of the wall
Low emissivity foil facing on XT/CW improves the thermal performance
Recommended residual cavity width is 50mm (Building Regulations)
Most effective method of preventing wind-driven rain penetrating a wall
25mm Unilin Xtroliner XO/PR is a warm roof construction board, comprising a rigid foam modified Polyisocyanurate (PIR) core with robust textured low emissivity aluminium foil facings.
Using XO/PR used above or between the roof rafters ensures that the structure is kept at or near the internal env..
25mm Unilin XO/PR XtroLiner Pitched Warm Roof PIR Insulation Board
Used above or between the rafters reducing thermal stress and condensation risk
Rigid foam modified Polyisocyanurate (PIR) core with textured robust facings
Lambda (thermal conductivity) of 0.021 W/mK and Euroclass C s2 d0 fire classification
Used on ventilated, hybrid or warm and sloped roofs to achieve most efficient U-values
25mm Knauf RS60 White Tissue Faced 2 Sides Insulation Slab is a robust A1 non-combustible slab, used as a fire, thermal and acoustic insulation for structural elements such as roofs and concrete car park soffits.
Rocksilk RS60 is a medium density (60kg/m3) insulation slab with a certified thermal..
25mm RW5 White Tissue Faced Two Sides Slab is a 100kg/m3 density insulation slab faced with white tissue on both sides, used as a fire resistant, acoustic and thermal insulation for roofs, concrete car park soffits and similar applications.
This special white tissue facings on both sides helps to..
Rockwool RW5 White Tissue Faced 2 Sides Insulation Slab 25mm
Robust A1 class, non-combustible fire resistant resin bonded slab
Provides from 30 minutes up to 240 minutes fire protection
Density 100kg/m3 Thermal conductivity (lambda) of 0.034 W/mK
For structural elements such as roofs, concrete car park soffits