100mm Unilin ECO/MA 360 (Sarking) Pitched Warm Roof Insulation is a bio-enhanced, superior performance PIR (polyisocyanurate) rigid foam insulation board suitable for pitched roofs.

Unilin Sarking Warm Roof Construction Board has the strength and thermal properties required to reach the high performance U-Values specified in the Building Regulations.

Using pioneering environmentally conscious technology, ECO360 in pitched roof applications will reduce heat loss while also delivering excellent thermal bridging details.

It is lightweight, easy to install and combines high compressive strength with low thermal conductivity, providing a high performance solution for pitched roof insulation.

ECO360 MA Bio Enhanced Insulation for sarking warm roofs offers excellent insulation performance with a thermal conductivity (lambda value) of 0.020 W/mK.

Detailing with breather membranes and vapour control membranes can be more accurately achieved with insulation in a single plane.

Adding an additional layer of Unilin ECO/MA between the counter battens minimises fixing length and improves the overall U-Value of the roof.

This bio-enhanced insulation will significantly improve the U-Value of new and existing roofs.

The product packaging is biodegradable and the overall content has been reduced significantly.

Unilin ECO360 Sarking Roof Board offers a bio-enhanced formulation which is halogen free.

ECO360 is a part of a design solution to achieve RIBA/RIAI Climate Challenge 2030, LETI Standards and the Future Homes Hub targets.

Specification:

Thickness: 100mm

Width: 1200mm

Length: 2400mm

Size: 100mm x 1200mm x 2400mm

Board Coverage: 2.88m2

Pack Coverage: 11.52m2

Profile: Square Edge

R-Value: 5.00m2K/W

Thermal Conductivity: 0.020 W/mK

Reaction to Fire: NPD

Compressive Strength: >150 (kPa)

Unilin ECO360 Sarking Warm Roof Construction Features:

 · Halogen free.

 · Suitable for warm roofs.

 · Biodegradable packaging.

 · High compressive strength.

 · Suitable for pitched roofs.

 · Suitable for sarking roof construction.

 · Bio-enhanced PIR rigid foam insulation.

 · Achieve RIBA/RIAI Climate Challenge 2030

 · Enhanced performance lambda as low as 0.020 W/mK.

 · Improves the U-Value of new and existing roofs.

 · Meets U-Values specified in the Building Regulations.

 · Achieve LETI Standards and the Future Homes Hub targets.

Unilin ECO/MA (SARKING) Warm Roof Construction Installation Guidelines:

 · Ensure cavity wall insulation has continued to roof height to meet with the roof insulation.

 · Fix a treated timber stop rail to the end of the rafter at the eaves.

 · Lay ECO/MA Sarking over the rafters ensuring the boards are fully engaged and positioned in a staggered pattern.

 · Joints should be fully supported by rafters.

 · Fill any gaps with expanding foam.

 · Use large headed clout nails to hold boards temporarily in place until they are secured by the counter battens.

 · Fix 38mm x 50mm counter battens with approved helical type fixings through the ECO/MA Sarking into the rafter.

 · The amount of fixings is determined by the fixing manufacturer who can also provide wind load calculations.

 · A breathable sarking membrane should be fitted; refer to manufacturer’s Agrément certification.

 · Ventilation may have to be provided subject to that certification and minimises the risk of interstitial condensation forming on the underside of the membrane.

 · Providing an unventilated void under the membrane can improve the thermal performance.

 · Secure 50mm x 25mm tiling battens through the counterbatten and ECO/MA Sarking to the rafter.

Certification and standards:

 · BBA Certification No.12/4956.

 · BS EN ISO 9001 Quality Management System.

 · BS EN ISO 14001 Environmental Management System.

 · BS EN 13165.

*Further information may be found in our Downloads section.

Fairly easy access to all PDF files.

Datasheet ǀ Declaration of Performance - DoP ǀ BBA Certificate ǀ Installation Guide ǀ Certificates ǀ Brochure ǀ SPEC Sheet 

*Special Product - Non returnable cancelable.