- 125mm Unilin ECO/MA 360 Bio-enhanced Roof PIR Insulation Board
- High performance - Thermal conductivity (lambda value) of 0.020 W/mK
- Unilin ECO360 Roofs meets U-Values specified in the Building Regulations
- RIBA/RIAI Climate Challenge 2030, LETI Standards, Future Homes Hub targets
- Bio-enhanced board will significantly improve the U-Value of new and existing roofs
In Stock
- Brand: Unilin Insulation (UK) known as Xtratherm
- Model: 125mm Unilin ECO360 Roofs
- Weight: 30.00kg
- Dimensions: 2,400mm x 1,200mm x 125mm
- SKU: 125mm Unilin ECO360 Roofs
- Product code: P1-3352
- MPN: 125mm Unilin ECO360 Roofs
Options available
125mm Unilin ECO360 Roof PIR Board, a rigid foam bio-enhanced PIR core with textured robust low emissivity foil facings, used for sloped roofs (ventilated, hybrid or warm).
Using pioneering environmentally conscious technology, ECO360 MA in roof applications will reduce heat loss while also delivering excellent thermal bridging details.
ECO/MA Roof is a lightweight, easy to install and combines high compressive strength with low thermal conductivity, providing a high performance solution for roof insulation.
Unilin ECO360 MA (Roof board) has the strength and thermal properties required to reach the high performance U-Values specified in the Building Regulations.
ECO360 MA Bio Enhanced Insulation for roofs offers excellent insulation performance with a thermal conductivity (lambda value) of 0.020 W/mK.
This bio-enhanced insulation will significantly improve the U-Value of new and existing roofs.
The product packaging is biodegradable and the overall content has been reduced significantly.
Unilin ECO360 Roof Board offers a bio-enhanced formulation which is halogen free.
ECO360 is a part of a design solution to achieve RIBA/RIAI Climate Challenge 2030, LETI Standards and the Future Homes Hub targets.
Specification:
Thickness: 125mm
Width: 1200mm
Length: 2400mm
Size: 125mm x 1200mm x 2400mm
Board Coverage: 2.88m2
Pack Coverage: 8.64m2
Profile: Square Edge
R-Value: 6.25m2K/W
Thermal Conductivity: 0.020 W/mK
Reaction to Fire: NPD
Compressive Strength: >150 (kPa)
Unilin ECO360 Roof Insulation Features:
· Halogen free.
· Suitable for sloped roofs.
· Suitable for ventilated roofs.
· Suitable for hybrid roofs.
· Suitable for warm roofs.
· Biodegradable packaging.
· High compressive strength.
· Bio-enhanced PIR rigid foam insulation.
· Achieve RIBA/RIAI Climate Challenge 2030
· Enhanced performance lambda as low as 0.020 W/mK.
· Improves the U-Value of new and existing roofs.
· Meets U-Values specified in the Building Regulations.
· Achieve LETI Standards and the Future Homes Hub targets.
Unilin ECO360 Roof Board Installation Guidelines:
Ventilated Roof Installation:
· Position and fix battens to the inner face of rafters, flush with the top edge of the timber.
· Allow for ventilation gaps, normally 50mm, (May be reduced depending on breather membrane certification).
· Cut boards with fine toothed saw to fit tightly between rafters, flush with the bottom of the rafter.
· Allow slight oversize of cut to achieve ‘friction fit’ and seal any gaps with expanding foam.
· A second continuous layer of insulation should be fixed to the underside of the rafter.
· Run the second layer transverse to the first with joints tightly butted.
· Fix with clout nails to hold insulation in place until plasterboard is installed.
· Provide a separate vapour control layer between insulation and plasterboard or alternatively, tape the joints of the insulation with an aluminium foil tape.
· Finish with plasterboard fixed with dry lining screws.
· Screw fix every 150mm, 12mm from edge of boards, ensuring a minimum 25mm penetration into the rafter or alternatively follow plasterboard manufacturer installations guidance.
Hybrid Roof Installation:
· Follow the same procedure as in the ventilated roof except a breather membrane is used above the rafter allowing the 50mm ventilation space to be dispensed with.
· Typically, a 25mm unventilated void should be maintained; Agrément certification covering the membrane should be consulted.
Warm Roof Installation:
· Ensure cavity wall insulation has continued to roof height to meet with the roof insulation.
· Fix a treated timber stop rail to the end of the rafter at the eaves.
· Lay ECO360 MA Roofs staggered jointed over the rafters.
· Ensure joints are tightly butted and fill any gaps with expanding foam.
· Joints should be fully supported by rafters.
· Boards can be temporarily fixed with nails.
· Fix 38mm x 50mm counter battens with approved fixings through the insulation board into the rafter.
· The amount of fixings is determined by the fixing manufacturer who can also provide wind load calculations.
· A breathable sarking membrane should be fitted; refer to manufacturer’s Agrément certification.
· Ventilation may have to be provided subject to that certification and minimises the risk of interstitial condensation forming on the underside of the membrane.
· Providing an unventilated void under the membrane can improve thermal performance.
· Secure 50mm x 25mm tiling battens through counterbatten and ECO360 MA Roofs to the rafter.
· If an additional second layer is required, this should be fixed between the rafters.
· Cut boards with fine toothed saw to fit tightly between rafters, flush with the top of the rafter.
· Allow slight oversize of cut to achieve ‘friction fit’ and seal any gaps with expanding foam.
· Provide a separate vapour control layer between the bottom of the rafter and plasterboard.
· Finish with plasterboard fixed with dry lining screws.
· Screw fix every 150mm, 12mm from edge of boards ensuring a minimum 25mm penetration into the rafter or alternatively follow plasterboard manufacturer installations guidance.
Certification and standards:
· BBA Certification No.12/4956.
· BS EN ISO 9001 Quality Management System.
· BS EN ISO 14001 Environmental Management System.
· BS EN 13165.
*Further information may be found in our Downloads section.
Fairly easy access to all PDF files.
Datasheet ǀ Declaration of Performance - DoP ǀ BBA Certificate ǀ Installation Guide ǀ Certificates ǀ Brochure ǀ SPEC Sheet
*Special Product - Non returnable cancelable.
specification | |
Board covarage | 8.64 m2 |
Colour | Light yellow |
Compressive Strength | 150 kPa (10% Compression) |
Length | 2400mm |
Material | Bio-enhanced PIR Rigid Foam |
Pack Coverage | 8.64m2 |
Profile | Square Edge |
R-Value | 0.13 W/m²K |
Size | 125mm x 1200mm x 2400mm |
Thermal Conductivity | 0.020 W/mK |
Thickness | 125mm |
Width | 1200mm |
Fire Classification | NPD |
Building Regulations | Compatible |
Coverage | 8.64m2 |
Finish | Textured robust low emissivity foil facings |
Quantity | 3 sheets |
Shipping method | Articulated Vehicle ǀ Courier |
Applications | Sloped Roofs, Ventilated Roofs, Hybrid Roofs, Warm Roofs |
BBA Certified | Yes |
Vapour Control Layer | Yes |
Fixing method | Fixings, Laid, Glued, Fitted |
Foil faced | Yes, textured robust low emissivity foil facings |
ETA Notification | Yes |
Features | Meets U-Values specified in the Building Regulations |
Manufacturer | Unilin Insulation® |
We deliver insulation materials to Mainland UK only. Deliveries to Highlands, Northern Ireland, Isle of Wight etc.. might be possible at additional cost.
We offer free delivery on most of the orders above £300 (excluding VAT) (except special products - shipping cost via courier - products marked ''Request A Quote'')
Delivery of some insulation materials might be extended due to the current situation (Covid-19, stock shortages, allocations).
If you need materials quickly please contact us - we will do our best to help you source materials needed.
We do not deliver on weekends and bank holidays. Sometimes we can deliver on Saturdays - please check with us before placing the order.
If you need any further information please contact us tel. 02081910776
We can help to calculate price per m2 or linear meter (one meter in length) cost, please just contact us via phone 02081910776, email or live chat. Alternatively, you can work it out yourself quickly and easily: to get cost per meter square please divide price shown in orange area by ''Required area (m2)'' Example price of £28.80 divided by board coverage 2.88m2 = cost of £10.00 per m2.
INSTALLERS
No matter whether you choose a local installer or a national company, there’s a few tips to help you find the right installer for your home insulation improvements, such as asking for recommendations and making sure that they’re part of a certification scheme. This makes sure that they have the right skills and standards of workmanship to carry out the installation, and you can be sure that they know exactly what they are doing.
4 TIPS FOR CHOOSING THE BEST INSULATION INSTALLER
1. Thermal inspection picture in portfolio
It’s worth seeing a installer’s previous work. There’s no harm asking if you can see any properties nearby that they’ve installed insulation in. Best way would be to see Infrared Thermal Imaging Inspections. Thermal cameras spot small, but key changes in temperature in different areas of a house, identifying problematic areas that the human eye never could and some that a visual inspection could only hypothesize.
2. Reviews
Along with checking recommendations and previous work, finding reviews online can often be a great way to find out if they provide a good service or not. However, it’s best not to solely rely on reviews you may find or review websites, as there’s no controlling who writes them.
3. Compare prices
Comparing prices will also ensure companies can’t take advantage of you and give you a fair price.
4. Word of Mouth
The best way to find a great insulation installer is through recommendations. Make sure you ask friends and family. They will most likely give you their honest opinion and can tell you from first hand experience.
Whether you require a wall, cladding, external wall, loft or floor insulation fitted, you can find and hire your local insulation installers from popular UK web pages. A simple internet search will return thousands of potential installers near your area.
https://www.nia-uk.org/find-an-installer/
https://www.ratedpeople.com/local-thermal-insulation
STOCKIST
We are the stockist of construction materials and related products for both trade and DIY from most recognizable brands in the UK like Cordek, RCM, Promat, Rockwool, Isover, Celotex, Xtratherm, Ursa, Low-E, Cedral, Kingspan, Dufaylite, British Gypsum, K-rend, Ecotherm, Iko enertherm, Kay-Metzeler, Terrawool to allow you to complete your insulation job on time at competitive prices and the highest standards.