- 380mm Teplo BFL-7 Ancon Cavity Wall Tie Suitable for 301-325mm cavities
- An ultra-low thermal conductivity cavity wall tie (restraint fixing for cavities)
- Teplo-BFL-7 can be fixed to concrete, masonry, steel and timber substrates
- Minimise heat loss across an insulated cavity, improving the energy efficiency
- Ribbed shank acts as an integral water drip, preventing water from crossing the cavity
In Stock
- Brand: Leviat-Ancon®
- Model: 380mm Teplo-BFL-7 Wall Tie
- Dimensions: 380mm x 7mm x 1mm
- SKU: 380mm Teplo-BFL-7 Wall Tie
- Product code: P1-3667
- MPN: 380mm Teplo-BFL-7 Wall Tie
380mm Teplo-BFL-7 Ancon Cavity Wall Tie (7mm diameter) is suitable for 301-325mm cavities, an ultra-low thermal conductivity wall tie that can be fixed to concrete, masonry, steel and timber.
Teplo BFL Tie is an ideal where a low thermal conductivity restraint fixing is required to minimise heat loss across an insulated cavity, improving the energy efficiency.
BFL-7 Tie offers the same benefits as Teplo-BF ties with an additional stainless steel upstand which is mechanically fixed to one end of the tie to allow for a secondary fixing.
The load performance will depend on the substrate and on-site pull out tests are recommended to confirm the strength of uncertain or old substrates.
The 7mm diameter hole in the upstand suits a variety of fixings, typically an M6 expansion bolt for concrete, a plug and screw for either masonry or concrete.
BFL-Tie product range comprises 18 standard products which meet the performance of Tie Types 2 or 3 when installed at a standard spacing of 2.5 ties per square metre.
Ancon Teplo-BFL-7 unique ribbed shank acts as an integral water drip, preventing water from crossing the cavity.
The Teplo-BFL-7-Tie can be used with the black Teplo-Clip where insulation is to be retained.
For fixing to timber frames it is recommended to use a 5 x 30 countersunk woodscrew.
Teplo-BFL-Tie product range is suitable for cavities from 76mm to 400mm.
Specification:
Diameter: 7mm
Length: 380mm
Cavity width: 301mm - 325mm
BBA Approved: Yes (14/5160)
Masonry fixings: Plug and Screw
Concrete fixings: M6 Expansion Bolt
Steel Frame fixings: Set Screw, Self-drilling
Timber Frame fixings: 5x30 Countersunk Screws
Substrates: Concrete, Masonry, Steel and Timber
Teplo-BFL-7 Ancon Cavity Wall Tie Features:
· 7mm diameter wall tie.
· BBA approved no.14/5160.
· Preventing water crossing the cavity.
· Ultra-low thermal conductivity wall tie.
· Suitable for cavities from 76mm to 400mm.
· Meet the performance of Tie Types 2 or 3.
· Minimises heat loss across an insulated cavity.
· Unique ribbed shank acts as an integral water drip.
· Improving the energy efficiency of a masonry cavity wall.
· Can be fixed to concrete, masonry, steel and timber substrates.
Teplo-BFL-7 Cavity Wall Tie (7mm diameter) Installation Suitable Fixings:
· Masonry: Plug and Screw.
· Timber: 5 x 30 Countersunk Wood Screw.
· Steel: Set Screw, Self-drilling Screw.
· Concrete: Plug and Screw, M6 Expansion Bolt.
· Meet the performance of Wall Tie Type 2 or Type 3.
· Should be installed at a standard spacing of 2.5 ties per m2.
*Further information may be found in our Downloads section.
Fairly easy access to all PDF files.
Datasheet ǀ Declaration of Performance - DoP ǀ BBA Certificate ǀ Installation Guide ǀ Certificates ǀ Brochure ǀ SPEC Sheet
specification | |
Cavity width | from 301mm to 325mm |
Diameter | 7mm |
Length | 380mm |
Material | Basalt fibres |
Thermal Conductivity | Ultra-low |
Shipping method | Courier |
Applications | Cavity Walls |
BBA Certified | Yes, no. 14/5160 |
ETA Notification | Yes |
Features | Unique ribbed shank acts as an integral water drip |
Manufacturer | Ancon® |
We deliver insulation materials to Mainland UK only. Deliveries to Highlands, Northern Ireland, Isle of Wight etc.. might be possible at additional cost.
We offer free delivery on most of the orders above £300 (excluding VAT) (except special products - shipping cost via courier - products marked ''Request A Quote'')
Delivery of some insulation materials might be extended due to the current situation (Covid-19, stock shortages, allocations).
If you need materials quickly please contact us - we will do our best to help you source materials needed.
We do not deliver on weekends and bank holidays. Sometimes we can deliver on Saturdays - please check with us before placing the order.
If you need any further information please contact us tel. 02081910776
We can help to calculate price per m2 or linear meter (one meter in length) cost, please just contact us via phone 02081910776, email or live chat. Alternatively, you can work it out yourself quickly and easily: to get cost per meter square please divide price shown in orange area by ''Required area (m2)'' Example price of £28.80 divided by board coverage 2.88m2 = cost of £10.00 per m2.
INSTALLERS
No matter whether you choose a local installer or a national company, there’s a few tips to help you find the right installer for your home insulation improvements, such as asking for recommendations and making sure that they’re part of a certification scheme. This makes sure that they have the right skills and standards of workmanship to carry out the installation, and you can be sure that they know exactly what they are doing.
4 TIPS FOR CHOOSING THE BEST INSULATION INSTALLER
1. Thermal inspection picture in portfolio
It’s worth seeing a installer’s previous work. There’s no harm asking if you can see any properties nearby that they’ve installed insulation in. Best way would be to see Infrared Thermal Imaging Inspections. Thermal cameras spot small, but key changes in temperature in different areas of a house, identifying problematic areas that the human eye never could and some that a visual inspection could only hypothesize.
2. Reviews
Along with checking recommendations and previous work, finding reviews online can often be a great way to find out if they provide a good service or not. However, it’s best not to solely rely on reviews you may find or review websites, as there’s no controlling who writes them.
3. Compare prices
Comparing prices will also ensure companies can’t take advantage of you and give you a fair price.
4. Word of Mouth
The best way to find a great insulation installer is through recommendations. Make sure you ask friends and family. They will most likely give you their honest opinion and can tell you from first hand experience.
Whether you require a wall, cladding, external wall, loft or floor insulation fitted, you can find and hire your local insulation installers from popular UK web pages. A simple internet search will return thousands of potential installers near your area.
https://www.nia-uk.org/find-an-installer/
https://www.ratedpeople.com/local-thermal-insulation
STOCKIST
We are the stockist of construction materials and related products for both trade and DIY from most recognizable brands in the UK like Cordek, RCM, Promat, Rockwool, Isover, Celotex, Xtratherm, Ursa, Low-E, Cedral, Kingspan, Dufaylite, British Gypsum, K-rend, Ecotherm, Iko enertherm, Kay-Metzeler, Terrawool to allow you to complete your insulation job on time at competitive prices and the highest standards.