- Length: 2500mm
- Material: Aluminium
- Base Track - Base Rail - Base Bead
- External Wall Insulation Systems
- 0.6mm thick
In Stock
- Brand: WEMICO®
- Model: 50mm (53mm)
- Dimensions: 2,500mm x 53mm x 0.60mm
- SKU: 90605
- Product code: P1-1292
- MPN: 90605
Options available
50mm Aluminium Base Track is a high-quality resistant to corrosion and atmospheric factors baserail profile designed for external wall insulation systems and thin coat rendering.
Base Bead 50mm is used in EWI systems as a cover for the lower part of the thermal insulation material of Expanded Polystyrene (EPS), Kingspan K5 or Mineral Wool against mechanical damage and pests.
Starter trim is an aluminium plain mill finish box shaped bead designed for various thicknesses of insulating panels.
This bottom bead is a 2500mm long profile made from 0.6mm thick raw aluminium to meet the recommendations of insulated render systems manufacturers.
50mm Base Rail is made of a self-hardening aluminium alloy with magnesium and silicon additives.
It is distinguished by its excellent formability and high corrosion resistance.
Eco-friendly and recyclable in line with the concept of sustainable development.
Aluminium is 100% recycled with no loss of quality and is the most frequently recovered metal!
Easy to handle and install starter/base track is available in: 20mm, 25mm, 30mm, 40mm, 50mm, 60mm, 70mm, 80mm, 90mm, 100mm, 110mm, 120mm, 130mm, 140mm, 150mm, 160mm, 170mm, 180mm, 190mm, 200mm widths.
Installation:
· Before starting the insulation works, the height of the plinth should be determined and it should be marked with a horizontal line.
· The skirting board should be installed at a height of approximately 400mm from the ground level.
· Starter profile is fastened to the base with a properly selected expansion plug, using at least 5 pins per 1m.
· The batten should always be fastened in the first and last holes.
· Level the unevenness of the walls with PD spacers.
· The end of the profiles at the wall corners, where two profiles connect, should be cut at an angle of 45 degrees.
· The starter profile must be installed perfectly horizontally to facilitate the correct installation of the insulation boards later on.
· Any deviation from the horizontal will result in gaps between the insulation boards.
Key points:
· Doesn't rust.
· Easily machined and cast.
· Lightweight yet durable.
· Recyclable material.
· Non-magnetic.
· Non-sparking.
· Good heat conductor.
· High quality.
· Easy to install.
· Can have an indefinite life.
*Further information may be found in our Downloads section.
Fairly easy access to all PDF files.
Datasheet ǀ Declaration of Performance - DoP ǀ BBA Certificate ǀ Installation Guide ǀ Certificates ǀ Brochure ǀ SPEC Sheet
*Special Product - Non returnable cancelable.
specification | |
Length | 2500mm |
lmetres | 2.5 |
Material | Aluminium |
Profile | Box Shaped |
Thickness | 0.6mm |
Width | 50mm |
Dim A | 53mm |
Finish | Plain Mill |
Shipping method | Courier |
Applications | External Wall Insulation Systems |
ETA Notification | Yes |
Features | High Corrosion Resistance |
Manufacturer | Protektor UK® |
We deliver insulation materials to Mainland UK only. Deliveries to Highlands, Northern Ireland, Isle of Wight etc.. might be possible at additional cost.
We offer free delivery on most of the orders above £300 (excluding VAT) (except special products - shipping cost via courier - products marked ''Request A Quote'')
Delivery of some insulation materials might be extended due to the current situation (Covid-19, stock shortages, allocations).
If you need materials quickly please contact us - we will do our best to help you source materials needed.
We do not deliver on weekends and bank holidays. Sometimes we can deliver on Saturdays - please check with us before placing the order.
If you need any further information please contact us tel. 02081910776
We can help to calculate price per m2 or linear meter (one meter in length) cost, please just contact us via phone 02081910776, email or live chat. Alternatively, you can work it out yourself quickly and easily: to get cost per meter square please divide price shown in orange area by ''Required area (m2)'' Example price of £28.80 divided by board coverage 2.88m2 = cost of £10.00 per m2.
INSTALLERS
No matter whether you choose a local installer or a national company, there’s a few tips to help you find the right installer for your home insulation improvements, such as asking for recommendations and making sure that they’re part of a certification scheme. This makes sure that they have the right skills and standards of workmanship to carry out the installation, and you can be sure that they know exactly what they are doing.
4 TIPS FOR CHOOSING THE BEST INSULATION INSTALLER
1. Thermal inspection picture in portfolio
It’s worth seeing a installer’s previous work. There’s no harm asking if you can see any properties nearby that they’ve installed insulation in. Best way would be to see Infrared Thermal Imaging Inspections. Thermal cameras spot small, but key changes in temperature in different areas of a house, identifying problematic areas that the human eye never could and some that a visual inspection could only hypothesize.
2. Reviews
Along with checking recommendations and previous work, finding reviews online can often be a great way to find out if they provide a good service or not. However, it’s best not to solely rely on reviews you may find or review websites, as there’s no controlling who writes them.
3. Compare prices
Comparing prices will also ensure companies can’t take advantage of you and give you a fair price.
4. Word of Mouth
The best way to find a great insulation installer is through recommendations. Make sure you ask friends and family. They will most likely give you their honest opinion and can tell you from first hand experience.
Whether you require a wall, cladding, external wall, loft or floor insulation fitted, you can find and hire your local insulation installers from popular UK web pages. A simple internet search will return thousands of potential installers near your area.
https://www.nia-uk.org/find-an-installer/
https://www.ratedpeople.com/local-thermal-insulation
STOCKIST
We are the stockist of construction materials and related products for both trade and DIY from most recognizable brands in the UK like Cordek, RCM, Promat, Rockwool, Isover, Celotex, Xtratherm, Ursa, Low-E, Cedral, Kingspan, Dufaylite, British Gypsum, K-rend, Ecotherm, Iko enertherm, Kay-Metzeler, Terrawool to allow you to complete your insulation job on time at competitive prices and the highest standards.