Bison Composite Batten Cladding Plank (Ash Grey colour) is a wood plastic based slatted cladding board fitted vertically or horizontally, an easy to fit system as only two trims and screws are needed.

Batten Cladding is a simple and easy to use system with minimal need for cutting, offering modern design and easy installation of cedar or siberian larch cladding with all the benefits of a composite material.

Wood Plastic Bison Cladding can be utilised for a wide variety of projects including but not limited to cladding, slatted fencing, internal feature walls or even planters.

Bison’s hard-wearing capping ensures the material stands up to all weather conditions, is UV stable, scratch resistant and nonporous.

Composite Batten Cladding Planks are environmentally friendly manufactured from 82% recycled material (wood fibre and HDPE plastic).

Each Bison composite batten cladding board comes in 2700mm length x 219mm width x 26mm thickness and 10-year product warranty.

Bison composite batten cladding offers the low maintenance, high quality and robust finish expected for a composite cladding building board.

Being a composite material ensures it is resistant to rot, mould and insects.

Low maintenance cladding product that will not need staining or painting.

Bison cladding planks can be simply hose or jet wash clean when required.

Specification:

Colour: Ash Grey

Thickness: 26mm

Length: 2700mm

Width: 219mm

Coverage: 0.54m²

Boards per m²: 1.85

Weight: 8.01kg per board

Weight per m²: 14.83kg

Cover Width: 200mm

Finish: timber effect

Life Expectancy: 10+ years

Fire Rating: B f1-S1

Bison Composite Batten Cladding Features:

 · Wood plastic based.

 · Offering modern design.

 · Minimal need for cutting.

 · Easy to use system.

 · Looks like a timber effect.

 · Will not rot.

 · Lightweight.

 · Hidden fixings.

 · UV Colour Stability.

 · 95% recyclable.

 · Scratch Resistant.

 · Unaffected by insects.

 · Low maintenance.

 · Non-Porous.

 · 10-year product warranty.

 · Two trims and screws are needed.

 · Can be fitted vertically or horizontally.

Bison Composite Batten Cladding Installation Guide:

 · As for any external cladding system it is recommended that you check with the planning office within your local council to ensure whether you need to submit a planning application.

 · Note that Composite Batten Cladding is a class B fire rating and so not suitable for external cladding above the height of 18m on residential buildings.

 · The diagrams and instructions outlined in this guide are for illustration purposes only and are not meant or implied to replace a licensed professional.

 · When dealing with any type of construction project, it is necessary to wear appropriate safety equipment to reduce risk of severe injury.

 · When handling, cutting, and installing, the following safety equipment is recommended at the very least: gloves, a respiratory protection mask, long sleeves, long trousers, and safety glasses.

 · Standard woodworking tools may be used.

 · It is recommended that all circular saw blades have carbide tips and that all fixings are stainless steel.

 · Bison Composite Batten Cladding should be stored on a flat surface either fully supported or on timber bearers at maximum 400mm spacing.

 · Careful layout planning and preparation is required before starting installation to ensure the best possible cladding effect of your project.

 · Consideration for how the boards will finish at corners, window & door reveals can ensure a better finish, reduce wastage, reduce rip cuts or additional joints.

 · We recommend drawing out a site plan of your proposed project to minimize errors.

 · Bison Cladding products are NOT intended for use as columns, support posts, beams, joist stringers or other primary load-bearing members.

 · WPC products must be supported by a code-compliant substructure.

 · While WPC products are great for retrofits, they CANNOT be installed on existing cladding boards.

 · Bison Cladding products CANNOT be directly installed onto close boarding like OSB or MDF.

 · It must be installed onto a substructure, so there is adequate and unobstructed air flow under the cladding to prevent excessive water absorption.

 · A minimum of 25mm (1 inch) of continuous net free area under the cladding surface is required for adequate ventilation on all wall cladding, so air can circulate between adjacent members to promote drainage and drying.

*Further information may be found in our Downloads section.

Fairly easy access to all PDF files.

Datasheet ǀ Declaration of Performance - DoP ǀ BBA Certificate ǀ Installation Guide ǀ Certificates ǀ Brochure ǀ SPEC Sheets