Largely manufactured from recycled glass (e.g. windscreens) and mineral base materials such as sand and without the use of binding agents. The ingredients are melted into molten glass, which is cooled and crushed into a fine powder. The powdered glass is poured into molds and heated (below the melting point) in a "sintering" process that causes the particles to adhere to one another. Next, a small amount of finely ground carbon-black is added and the material is heated in a "cellulation" process. Here, the carbon reacts with oxygen, creating carbon dioxide, which creates the insulating bubbles in the (material). CO2 accounts for more than 99% of the gas in the cellular spaces.
Cellulose insulation is a material made from recycled newspaper. The paper is shredded and inorganic salts, such as boric acid, are added for resistance to fire, mould, insects and vermin. The insulation is installed either blown or damp-sprayed depending on application.
Wood fibre
The success of wood fibre insulation derives from an attractive environmental profile combined with a whole bag of functions including rigid insulation, sheathing and sarking for timber frames, roofs and flooring as well as flexible insulation for studs and rafters.
Wood of course is renewable, it sequesters carbon during its growth and product production is relatively free from pollution. The insulation value of wood fibre boards is not as dimensionally efficient as some of the orthodox petro-chemical materials - but it's no slouch either - typically coming in with a 'k value' range of between 0.038-0.043 W/mK depending on format.
Hemp
Hemp fibres are produced from hemp straw of the hemp plant. Most hemp is imported, but an increasing amount of home-grown crop is becoming available. Hemp grows up to a height of nearly 4 metres within a period of 100-120 days. Because the plants shade the soil, no chemical protection or toxic additives are required for hemp cultivation. The product is composed of, usually, 85% hemp fibre with the ballance made up of polyester binding and 3-5% soda added for fire proofing.
Straw
Straw is an agricultural by-product, the dry stalks of cereal plants, after the grain and chaff have been removed. Straw makes up about half of the yield of cereal crops such asbarley, oats, rice, rye and wheat.
Cordek® has provided technical solutions for a wide range of construction requirements since formation in 1973. The Cordek® range of ground heave solutions is designed to protect suspended floor slabs, piled ground beams and pile caps from the effects associated with ground heave. In addition to ground heave protection, the product range includes systems which incorporate permanent formwork, insulation and passive ground gas venting options. Both standard and bespoke solutions are available to meet the specific ground heave protection requirements of the foundation design.
Cordek® company HX S and HX B products has been specially designed to protect reinforced suspended floor slabs, piled ground beams and pile caps from upward forces. Each grade of product offers different safe and fail loads to allow a specific level of pressure before the boards collapse and create a void around the affected area. On the other hand, HX Plus provides combined ground heave protection and integral insulation in a single product.
A compressible, low density Heaveguard EPS offered by Cordek® protects foundations against lateral heave.
Cordek® Filcor Structural Fill Solution
Soon Cordek® company came up with great non-degradable, structural fill solution called Filcor. This void former replaces traditional heavyweight construction materials. Made from polystyrene, Filcor 20 is commonly used as a lightweight material for forming voids and openings within concrete structures. Because of that, it became the most common product in everyday "groundworks" life. Though its low weight and price is most widely recognized as being the best price-value Cordek® product. Moreover, Filcor 20 price is the lowest compared to the other manufacturers. Wide range of higher Filcor grades can withstand thicker concrete slabs.
275mm Cellcore HX Plus Grade 18/24 (EPS) Insulated Heave Protection is a two in one solution designed for use beneath reinforced concrete floor slabs to protect against the potential effects of ground heave with the additional Filcor EPS100 insulation layer protected by a ultra thin polypropylene sh..
275mm Cellcore HX Plus thermal resistance is 3.47m2c/w
290mm Cellcore HX Plus EPS Grade 18/24 Insulated Heave Protection Board is a two in one product designed for use beneath reinforced concrete floor slabs to protect against the potential effects of ground heave with the additional Filcor EPS100 insulation layer protected by a ultra thin polypropylene..
290mm Cellcore HX Plus thermal resistance is 2.08m2c/w
300mm Cellcore HX Plus Grade 18/24 (EPS) Insulated Heave Protection is a two in one solution designed for use beneath reinforced concrete floor slabs to protect against the potential effects of ground heave with the additional Filcor EPS100 insulation layer protected by a ultra thin polypropylene sh..
300mm Cellcore HX Plus thermal resistance is 4.17m2c/w
315mm Cellcore HX Plus EPS Grade 18/24 Insulated Heave Protection Board is a two in one product designed for use beneath reinforced concrete floor slabs to protect against the potential effects of ground heave with the additional Filcor EPS100 insulation layer protected by a ultra thin polypropylene..
315mm Cellcore HX Plus thermal resistance is 2.78m2c/w
340mm Cellcore HX Plus EPS Grade 18/24 Insulated Heave Protection Board is a two in one product designed for use beneath reinforced concrete floor slabs to protect against the potential effects of ground heave with the additional Filcor EPS100 insulation layer protected by a ultra thin polypropylene..
340mm Cellcore HX Plus thermal resistance is 3.47m2c/w
365mm Cellcore HX Plus EPS Grade 18/24 Insulated Heave Protection Board is a two in one solution designed for use beneath reinforced concrete floor slabs to protect against the potential effects of ground heave with the additional Filcor EPS100 insulation layer protected by a ultra thin polypropylen..
365mm Cellcore HX Plus thermal resistance is 4.17m2c/w
For use beneath reinforced concrete floor slab insulation
365mm Cellcore HX PLUS Insulated Heave Protection
Cellcore HX Plus range is BBA certified (no.11/4862)
2 in 1 Solution - Insulation and Heave Protection Board
Cordek Heaveguard 600x600x220mm Pile Collars are compressible low density Expanded Polystyrene products, used when foundations need to be protected against ground heave.
The Heaveguard (Claymaster) pile collar is an engineered material in green or pink color designed to safeguard piles against up..
600x600x85mm Cordek Heaveguard Pile Collars are compressible low density Expanded Polystyrene products, used when foundations need to be protected against ground heave.
The Heaveguard (Claymaster) pile collar is an engineered material in green or pink color designed to safeguard piles against upl..
Cordek Cellcore HX B Under Beam 18/24 is a 85mm thick lightweight expanded polystyrene board designed for use beneath reinforced concrete ground beams and pile caps to protect against the potential effects of ground heave.
Cellcore HX B Grade 18/24 is calculated and calibrated for concrete thick..
90mm Cordek Cellcore HX S Under Slab 18/24 is a lightweight expanded polystyrene (EPS) block designed for use beneath reinforced concrete floor slabs to protect against the potential effects of ground heave by reducing the upward force transmitted to the structure from ground heave.
Grade 18/24 i..
155x600x2400mm HX B Under Beam Grade 18-24 is used beneath reinforced concrete ground beams and pile caps, an unique hollow construction polystyrene block with moulded legs.
Cellcore HX B Grade 18-24 is fully tested, calculated and calibrated for concrete thickness up to 660mm to protect ground b..
155mm thick Cellcore Under Beam HX B Board cut to 600mm widths
HX B Ground Beams Grade 18-24 max. concrete depth up to 660mm
Protects ground beams against the potential effects of ground heave
Used beneath reinforced concrete ground beams and pile caps
Special hollow construction expanded polystyrene (EPS) block
HX B Under Beam 85mm x 2400mm x 600mm Grade 18-24 is an ultimate moisture resistant hollow construction EPS used beneath reinforced concrete ground beams and pile caps.
Cellcore HX B Grade 18-24 is fully tested, calculated and calibrated for concrete thickness up to 660mm to protect ground beams ..
85mm thick Cellcore Under Beam HX B Board cut to 600mm widths
HX B Ground Beams Grade 18-24 for concrete thickness up to 660mm
Protects ground beams against the potential effects of ground heave
Used beneath reinforced concrete ground beams and pile caps
Special hollow construction expanded polystyrene (EPS) block
Filcor 70 Cordek is a lightweight structural fill material used as a void former for forming openings and voids within concrete structures in Hard and Soft Landscaping, Podium Slabs, Swimming Pools, Steps, ramps and shapes.
Cordek Filcor Grade 70 is calculated and calibrated for concrete thicknes..
Swimming Pools, Podium Slabs
Hard and Soft Landscaping, Steps, Ramps and Shapes
130mm Cellcore HX Plus Grade 24/32 (EPS) Insulated Heave Protection is a two in one solution designed for use beneath reinforced concrete floor slabs to protect against the potential effects of ground heave with the additional Filcor EPS100 insulation layer protected by a ultra thin polypropylene sh..
Under Concrete Floor Slab Insulation Board
HX Plus range is BBA certified (no.11/4862)
Cellcore HX Plus Insulated Heave Protection Board
Beneath reinforced concrete floor slab insulation
130mm Cellcore HX Plus thermal resistance is 1.39m2c/w
155mm Cordek Cellcore HX B Under Beam EPS Block 24/32 is a special board designed for use beneath reinforced concrete ground beams and pile caps to protect against the potential effects of ground heave.
HX B (Concrete Piled Ground Beams Board) Grade 24/32 is calculated and calibrated for concret..
155mm Cellcore HX Plus Grade 24/32 (EPS) Insulated Heave Protection is a two in one solution designed for use beneath reinforced concrete floor slabs to protect against the potential effects of ground heave with the additional Filcor EPS100 insulation layer protected by a ultra thin polypropylene sh..
Under Concrete Floor Slab Insulation Board
HX Plus range is BBA certified (no.11/4862)
Cellcore HX Plus Insulated Heave Protection Board
Beneath reinforced concrete floor slab insulation
155mm Cellcore HX Plus thermal resistance is 2.08m2c/w
155mm x 600mm x 800mm Heaveguard Pile Collars are compressible low density Expanded Polystyrene products, used when foundations need to be protected against ground heave.
The Heaveguard (Claymaster) pile collar is an engineered material in green or pink color designed to safeguard piles against u..
155mm Cordek Cellcore HX B for Ground Beams Grade 24-32 is a non-collapsible EPS void former board used beneath reinforced concrete ground beams and pile caps.
Cellcore HX B Grade 24-32 is fully tested, calculated and calibrated for concrete thickness up to 900mm to protect ground beams against t..
155mm thick Cellcore Under Beam HX B Board cut to 600mm widths
HX B Ground Beams Grade 24-32 max. concrete depth up to 900mm
Protects ground beams against the potential effects of ground heave
Used beneath reinforced concrete ground beams and pile caps
Special hollow construction expanded polystyrene (EPS) block
160mm Cellcore HX S Under Slab 24/32 is a lightweight board designed for use beneath reinforced concrete floor slabs to protect against the potential effects of ground heave by reducing the upward force transmitted to the structure from ground heave.
Grade 24/32 is calculated and calibrated for c..
180mm Cellcore HX Plus Grade 24/32 (EPS) Insulated Heave Protection is a two in one solution designed for use beneath reinforced concrete floor slabs to protect against the potential effects of ground heave with the additional Filcor EPS100 insulation layer protected by a ultra thin polypropylene sh..
Under Concrete Floor Slab Insulation Board
HX Plus range is BBA certified (no.11/4862)
Cellcore HX Plus Insulated Heave Protection Board
Beneath reinforced concrete floor slab insulation
180mm Cellcore HX Plus thermal resistance is 2.78m2c/w
200mm Cellcore HG Grade 40/50 is a lightweight expanded polystyrene (EPS) insulation board designed for use in ground heave protection applications where the specification of the project mean that the standard Cellcore HX S Under Floor Slabs and Cellcore HX B Under Ground Beams products are not suit..
200mm Cellcore HX Plus Grade 24/32 (EPS) Insulated Heave Protection is a two in one solution designed for use beneath reinforced concrete floor slabs to protect against the potential effects of ground heave with the additional Filcor EPS100 insulation layer protected by a ultra thin polypropylene sh..
200mm Cellcore HX Plus thermal resistance is 1.39m2c/w
205mm Cellcore HX Plus Grade 24/32 (EPS) Insulated Heave Protection is a two in one solution designed for use beneath reinforced concrete floor slabs to protect against the potential effects of ground heave with the additional Filcor EPS100 insulation layer protected by a ultra thin polypropylene sh..
Under Concrete Floor Slab Insulation Board
HX Plus range is BBA certified (no.11/4862)
Cellcore HX Plus Insulated Heave Protection Board
Beneath reinforced concrete floor slab insulation
205mm Cellcore HX Plus thermal resistance is 3.47m2c/w
205mm Cellvent HX Grade 7/10 used to limit the pressure exerted on in-situ reinforced suspended concrete floors or piled ground beams by expansion of clay soils (clay heave) or ground recovery.
Cellvent HX is available in a range of specifications and can be used in conjunction with gas membranes..
205mm Cordek Cellcore Cellvent HX Cellular EPS Void Former
Cellvent HX Grade 7/10 Maximum Concrete Depth 220mm
Reinforced ground floor slabs where subsidence is not expected
Used to alleviate the effects of ground heave and gas venting
Combined ground heave protection and passive gas venting system
220mm Cordek Cellcore HX B Under Beam (Concrete Ground Beams Protection Board) 24/32 is designed for use beneath reinforced concrete ground beams and pile caps to protect against the potential effects of ground heave.
HX B (Ground Heave Solution) Grade 24/32 is calculated and calibrated for conc..
225mm Cellcore HX Plus Grade 24/32 (EPS) Insulated Heave Protection is a two in one solution designed for use beneath reinforced concrete floor slabs to protect against the potential effects of ground heave with the additional Filcor EPS100 insulation layer protected by a ultra thin polypropylene sh..
225mm Cellcore HX Plus thermal resistance is 2.08m2c/w
225mm Cellcore HX S Under Slab 24/32 is designed for use beneath reinforced concrete floor slabs to protect against the potential effects of ground heave by reducing the upward force transmitted to the structure from ground heave.
Grade 24/32 is calculated and calibrated for concrete thickness up..
230mm Cellcore HX Plus Grade 24/32 (EPS) Insulated Heave Protection is a two in one solution designed for use beneath reinforced concrete floor slabs to protect against the potential effects of ground heave with the additional Filcor EPS100 insulation layer protected by a ultra thin polypropylene sh..
Under Concrete Floor Slab Insulation Board
HX Plus range is BBA certified (no.11/4862)
Cellcore HX Plus Insulated Heave Protection Board
Beneath reinforced concrete floor slab insulation
230mm Cellcore HX Plus thermal resistance is 4.17m2c/w
250mm Cellcore HX Plus Grade 24/32 (EPS) Insulated Heave Protection is a two in one solution designed for use beneath reinforced concrete floor slabs to protect against the potential effects of ground heave with the additional Filcor EPS100 insulation layer protected by a ultra thin polypropylene sh..
250mm Cellcore HX Plus thermal resistance is 2.78m2c/w
265mm Cellcore HX Plus EPS Grade 24/32 Insulated Heave Protection Board is a two in one product designed for use beneath reinforced concrete floor slabs to protect against the potential effects of ground heave with the additional Filcor EPS100 insulation layer protected by a ultra thin polypropylene..
265mm Cellcore HX Plus thermal resistance is 1.39m2c/w
275mm Cellcore HX Plus Grade 24/32 (EPS) Insulated Heave Protection is a two in one solution designed for use beneath reinforced concrete floor slabs to protect against the potential effects of ground heave with the additional Filcor EPS100 insulation layer protected by a ultra thin polypropylene sh..
275mm Cellcore HX Plus thermal resistance is 3.47m2c/w
290mm Cellcore HX Plus EPS Grade 24/32 Insulated Heave Protection Board is a two in one product designed for use beneath reinforced concrete floor slabs to protect against the potential effects of ground heave with the additional Filcor EPS100 insulation layer protected by a ultra thin polypropylene..
290mm Cellcore HX Plus thermal resistance is 2.08m2c/w
300mm Cellcore HX Plus Grade 24/32 (EPS) Insulated Heave Protection is a two in one solution designed for use beneath reinforced concrete floor slabs to protect against the potential effects of ground heave with the additional Filcor EPS100 insulation layer protected by a ultra thin polypropylene sh..
300mm Cellcore HX Plus thermal resistance is 4.17m2c/w
300mm Cordek Heaveguard Protection Against Ground Heave is a lightweight, compressible-fill expanded polystyrene (EPS) material designed to protect foundations against effects of ground heave, typically on the inside face of piled ground beams or deep trench fill foundations.
Cordek Heaveguard 30..
Clay Heave Protection
Board coverage: 2.88m2
Soil heave potential: Medium
BBA Agrement Certificate No. 17/5448
Low density compressible expanded polystyrene (EPS)
315mm Cellcore HX Plus EPS Grade 24/32 Insulated Heave Protection Board is a two in one product designed for use beneath reinforced concrete floor slabs to protect against the potential effects of ground heave with the additional Filcor EPS100 insulation layer protected by a ultra thin polypropylene..
315mm Cellcore HX Plus thermal resistance is 2.78m2c/w
340mm Cellcore HX Plus EPS Grade 24/32 Insulated Heave Protection Board is a two in one product designed for use beneath reinforced concrete floor slabs to protect against the potential effects of ground heave with the additional Filcor EPS100 insulation layer protected by a ultra thin polypropylene..
340mm Cellcore HX Plus thermal resistance is 3.47m2c/w
365mm Cellcore HX Plus EPS Grade 24/32 Insulated Heave Protection Board is a two in one solution designed for use beneath reinforced concrete floor slabs to protect against the potential effects of ground heave with the additional Filcor EPS100 insulation layer protected by a ultra thin polypropylen..
365mm Cellcore HX Plus thermal resistance is 4.17m2c/w
For use beneath reinforced concrete floor slab insulation
365mm Cellcore HX PLUS Insulated Heave Protection
Cellcore HX Plus range is BBA certified (no.11/4862)
2 in 1 Solution - Insulation and Heave Protection Board
85mm Cordek Cellcore HX B Under Beam 24/32 is an expanded polystyrene block designed for use beneath reinforced concrete ground beams and pile caps to protect against the potential effects of ground heave.
Cellcore HX B Grade 24/32 is calculated and calibrated for concrete thickness up to 900mm (..
85mm HX B for Reinforced Concrete Ground Beams Grade 24-32 is a non-collapsible Cordek void former EPS board used beneath reinforced concrete ground beams and pile caps.
Cellcore HX B Grade 24-32 is fully tested, calculated and calibrated for concrete thickness up to 900mm to protect ground beams..
85mm thick Cellcore Under Beam HX B Board cut to 600mm widths
HX B Ground Beams Grade 24-32 for concrete thickness up to 900mm
Protects ground beams against the potential effects of ground heave
Used beneath reinforced concrete ground beams and pile caps
Special hollow construction expanded polystyrene (EPS) block
85mm x 600mm x 800mm Heaveguard Pile Collars are compressible low density Expanded Polystyrene products, used when foundations need to be protected against ground heave.
The Heaveguard (Claymaster) pile collar is an engineered material in green or pink color designed to safeguard piles against up..
90mm Cellcore HX S Under Slab Grade 24/32 is an EPS board designed for use beneath reinforced concrete floor slabs to protect against the potential effects of ground heave by reducing the upward force transmitted to the structure from ground heave.
HX S Grade 24/32 is calculated and calibrated fo..
90mm Cordek Cellcore HX S Under Slab EPS 24/32
HX S Grade 24/32 - Maximum Concrete Depth 900mm
Designed for use beneath reinforced concrete floor slabs
Protection against the potential effects of ground heave
Ground Heave Solutions - Cellcore HX S Under Slab EPS
220mm x 600mm x 2400mm Cellcore HX B Under Beam 24-32 is a special hollow core construction EPS block used beneath reinforced concrete ground beams and pile caps.
Cordek Cellcore HX B Grade 24-32 is calculated and calibrated for concrete thickness up to 900mm to protect ground beams against the e..
220mm thick Cellcore Under Beam HX B Board cut to 600mm widths
HX B Ground Beams Grade 24-32 max. concrete depth up to 900mm
Protects ground beams against the potential effects of ground heave
Used beneath reinforced concrete ground beams and pile caps
Special hollow construction expanded polystyrene (EPS) block
Filcor 90 EPS Cordek (EPS) is a lightweight structural fill material used as a void former solution for forming openings and voids within concrete structures in Hard Landscaping, Soft Landscaping, Podium Slabs, Swimming Pools, Steps, ramps and shapes.
Cordek Filcor Grade 90 is calculated and cali..
Swimming Pools, Podium Slabs
Hard and Soft Landscaping, Steps, Ramps and Shapes
Heaveguard Pile Collars 220mm x 600mm x 800mm are compressible low density Expanded Polystyrene products, used when foundations need to be protected against ground heave.
The Heaveguard (Claymaster) pile collar is an engineered material in green or pink color designed to safeguard piles against u..
155mm x 700mm x 700mm Cordek Heaveguard Pile Collars are compressible low density Expanded Polystyrene products, used when foundations need to be protected against ground heave.
The Heaveguard (Claymaster) pile collar is an engineered material in green or pink color designed to safeguard piles ag..
155mm Cellcore HX B Under Beam EPS Block 32/42 is a ground beam protection board designed for use beneath reinforced concrete ground beams and pile caps to protect against the potential effects of ground heave.
HX B Under Beam for Concrete Piled Ground Beams Grade 32/42 is calculated and calibra..
155mm Cordek Cellcore HX B Under Beam EPS 32/42
155mm HX B Grade 32/42 - Max. Concrete Depth 1220mm
Provides protection against the potential effects of ground heave
Cordek HX B Under Beam (Grade 32-42) is a 155mm thick, 600mm wide and 2400mm long hollow core EPS block used beneath reinforced concrete ground beams and pile caps.
Cellcore HX B Grade 32-42 is fully tested, calculated and calibrated for concrete thickness up to 1220mm to protect ground beams aga..
155mm thick Cellcore Under Beam HX B Board cut to 600mm widths
HX B Ground Beams Grade 32-42 max. concrete depth up to 1220mm
Protects ground beams against the potential effects of ground heave
Used beneath reinforced concrete ground beams and pile caps
Special hollow construction expanded polystyrene (EPS) block
200mm Cellcore HG Grade 50/65 is a lightweight expanded polystyrene (EPS) insulation board designed for use in ground heave protection applications where the specification of the project mean that the standard Cellcore HX S Under Floor Slabs and Cellcore HX B Under Ground Beams products are not suit..
205mm Cellvent HX Grade 9/13, an expanded polystyrene (EPS) cellular void former, for use in limiting the pressure exerted on in-situ reinforced suspended concrete floors or piled ground beams.
Cellvent HX is available in a range of specifications and can be used in conjunction with gas membranes..
205mm Cordek Cellcore Cellvent HX Cellular EPS Void Former
Cellvent HX Grade 9/13 Maximum Concrete Depth 300mm
Reinforced ground floor slabs where subsidence is not expected
Used to alleviate the effects of ground heave and gas venting
Combined ground heave protection and passive gas venting system
700x700x220mm Cordek Heaveguard Pile Collars are compressible low density Expanded Polystyrene products, used when foundations need to be protected against ground heave.
The Heaveguard (Claymaster) pile collar is an engineered material in green or pink color designed to safeguard piles against up..
700x700x85mm Cordek Heaveguard Pile Collars are compressible low density Expanded Polystyrene products, used when foundations need to be protected against ground heave.
The Heaveguard (Claymaster) pile collar is an engineered material in green or pink color designed to safeguard piles against upl..
90mm Cellcore HX S Under Slab (32/42) is designed for use beneath reinforced concrete floor slabs to protect against the potential effects of ground heave by reducing the upward force transmitted to the structure from ground heave.
Cordek HX S Grade 32/42 is calculated and calibrated for concrete..
90mm Cordek Cellcore HX S Under Slab EPS 32/42
HX S Grade 32/42 - Maximum Concrete Depth 1220mm
Designed for use beneath reinforced concrete floor slabs
Protection against the potential effects of ground heave
Ground Heave Solutions - Cellcore HX S Under Slab EPS
HX B Under Beam 2400x600x85mm Grade 32-42, an unique polystyrene based board with hollow core and moulded legs used beneath reinforced concrete ground beams and pile caps.
Cellcore HX B Grade 32-42 is fully tested, calculated and calibrated for concrete thickness up to 1220mm to protect ground be..
85mm thick Cellcore Under Beam HX B Board cut to 600mm widths
HX B Ground Beams Grade 32-42 for concrete thickness up to 1220mm
Protects ground beams against the potential effects of ground heave
Used beneath reinforced concrete ground beams and pile caps
Special hollow construction expanded polystyrene (EPS) block
Cordek Cellcore HX S Under Slab 160mm (Grade 32/42) is designed for use beneath reinforced concrete floor slabs to protect against the potential effects of ground heave by reducing the upward force transmitted to the structure from ground heave.
The Cordek Cellcore HX S Under Slab EPS is a compre..
160mm Cordek Cellcore HX S Under Slab EPS 32/42
HX S Grade 32/42 - Maximum Concrete Depth 1220mm
Designed for use beneath reinforced concrete floor slabs
Protection against the potential effects of ground heave
Ground Heave Solutions - Cellcore HX S Under Slab EPS
Cellcore HX S Under Slab 32/42 is a 225mm thick EPS sheet designed for use beneath reinforced concrete floor slabs to protect against the potential effects of ground heave by reducing the upward force transmitted to the structure from ground heave.
Cordek Cellcore HX S Grade 32/42 is calculated a..
225mm Cordek Cellcore HX S Under Slab EPS 32/42
225mm HX S Grade 32/42 Max. Concrete Depth 1220mm
Ground Heave Solutions - Cellcore HX S Under Slab EPS
Designed for use beneath reinforced concrete floor slabs
Protection against the potential effects of ground heave
220mm thick Cordek Cellcore HX B Under Beam 32-42 is a non-collapsible 600mm wide void former board used beneath reinforced concrete ground beams and pile caps.
Cordek Cellcore HX B Grade 32-42 is calculated and calibrated for concrete thickness up to 1220mm to protect ground beams against the ef..
220mm thick Cellcore Under Beam HX B Board cut to 600mm widths
HX B Ground Beams Grade 32-42 max. concrete depth up to 1220mm
Protects ground beams against the potential effects of ground heave
Used beneath reinforced concrete ground beams and pile caps
Special hollow construction expanded polystyrene (EPS) block
Cordek Cellcore HX B Under Beam 32/42 is a 85mm thick EPS block designed for use beneath reinforced concrete ground beams and pile caps to protect against the potential effects of ground heave.
Cellcore HX B Grade 32/42 is calculated and calibrated for concrete thickness up to 1220mm (Tested to a..
85mm Cordek Cellcore HX B Under Beam EPS 32/42
85mm HX B Grade 32/42 - Max. Concrete Depth 1220mm
Cordek Cellcore HX B Under Beam 220mm (Foundation Protection Board) 32/42 is specially designed eps block for use beneath reinforced concrete ground beams and pile caps to protect against the potential effects of ground heave.
HX B Under Beam (Ground Heave Solution) Grade 32/42 is calculated and ..
Used beneath reinforced concrete ground beams and pile caps
220mm Cordek Cellcore HX B Under Beam EPS 32/42
Provides protection against the potential effects of ground heave
220mm HX B Grade 32/42 - Max. Concrete Depth 1220mm
Filcor 100 Cordek EPS (Expanded Polystyrene) is a lightweight structural fill material used as a void former solution for forming openings and voids within concrete structures.
Cordek Filcor Grade 100 is calculated and calibrated for concrete thickness up to 4000mm (has been tested to achieve the..
Swimming Pools, Podium Slabs
Hard and Soft Landscaping, Steps, Ramps and Shapes
155x800x800mm Heaveguard Pile Collars are compressible low density Expanded Polystyrene (EPS) products, used when foundations need to be protected against ground heave.
The Heaveguard (Claymaster) pile collar is an engineered material in green or pink color designed to safeguard piles against upl..
205mm Cellvent HX Grade 13/18 is a cellular expanded polystyrene void former, used to limit the pressure exerted on in-situ reinforced suspended concrete floors or piled ground beams.
Cellvent HX is available in a range of specifications and can be used in conjunction with gas membranes, vent out..
205mm Cordek Cellcore Cellvent HX Cellular EPS Void Former
Cellvent HX Grade 13/18 Maximum Concrete Depth 460mm
Reinforced ground floor slabs where subsidence is not expected
Used to alleviate the effects of ground heave and gas venting
Combined ground heave protection and passive gas venting system
220mm x 800mm x 800mm Heaveguard Pile Collars are compressible low density Expanded Polystyrene products, used when foundations need to be protected against ground heave.
The Heaveguard (Claymaster) pile collar is an engineered material in green or pink color designed to safeguard piles against u..
300mm Cellcore HG Grade 30/40 Ground Heave Solution is a lightweight expanded polystyrene insulation board specially designed for use in ground heave protection applications where the specification of the project mean that the standard Cellcore Under Slab and Under Ground Beam products are not suita..
85mm x 800mm x 800mm Heaveguard Pile Collars are compressible low density Expanded Polystyrene products, used when foundations need to be protected against ground heave.
The Heaveguard (Claymaster) pile collar is an engineered material in green or pink color designed to safeguard piles against up..
Filcor 120 Cordek EPS (Expanded Polystyrene) is a lightweight structural fill material used as a void former solution for forming openings and voids within concrete structures in Hard Landscaping, Soft Landscaping, Podium Slabs, Swimming Pools, Steps, ramps and shapes.
Cordek Filcor Grade 120 is ..
Swimming Pools, Podium Slabs
Hard and Soft Landscaping, Steps, Ramps and Shapes
205mm Cellvent HX Grade 18/24 is designed for use under suitably reinforced ground floor slabs where subsidence is not expected, combining the benefits of the Cellcore HX range with Ventform.
Cellvent HX is available in a range of specifications and can be used in conjunction with gas membranes, ..
205mm Cordek Cellcore Cellvent HX Cellular EPS Void Former
Cellvent HX Grade 18/24 Maximum Concrete Depth 660mm
Reinforced ground floor slabs where subsidence is not expected
Used to alleviate the effects of ground heave and gas venting
Combined ground heave protection and passive gas venting system
300mm Cellcore HG Grade 40/50 is a lightweight expanded polystyrene (EPS) insulation board designed for use in ground heave protection applications where the specification of the project mean that the standard Cellcore HX S Under Floor Slabs and Cellcore HX B Under Ground Beams products are not suit..
85mm x 900mm x 1200mm Heaveguard EPS Pile Collars are compressible low density Expanded Polystyrene products, used when foundations need to be protected against ground heave.
The Heaveguard (Claymaster) pile collar is an engineered material in green or pink color designed to safeguard piles again..
Claymaster Pile Collar 220mm x 900mm x 1200mm is a compressible low density Expanded Polystyrene product, used when foundations need to be protected against ground heave.
The Heaveguard (Claymaster) pile collar is an engineered material in green or pink color designed to safeguard piles against u..
Filcor 140 Cordek EPS (Expanded Polystyrene) is a lightweight structural fill material used as a void former solution for forming openings and voids within concrete structures in Hard Landscaping, Soft Landscaping, Podium Slabs, Swimming Pools, Steps, ramps and shapes.
Cordek Filcor Grade 140 is ..
Swimming Pools, Podium Slabs
Hard and Soft Landscaping, Steps, Ramps and Shapes
155mm x 900mm x 1200mm Heaveguard Pile Collars are compressible low density Expanded Polystyrene products, used when foundations need to be protected against ground heave.
The Heaveguard (Claymaster) pile collar is an engineered material in green or pink color designed to safeguard piles against ..
220x1200x1200mm Heaveguard Pile Collars are compressible low density Expanded Polystyrene (EPS) products, used when foundations need to be protected against ground heave.
The Heaveguard (Claymaster) pile collar is an engineered material in green or pink color designed to safeguard piles against u..
270mm Cellcore Cellvent HX Grade 7/10 combines the benefits of the Cellcore HX range with Ventform to alleviate the effects of ground heave whilst also providing an excellent gas venting.
Cordek EPS Void Former Formwork Cellvent HX 270x1200x2400mm is designed for use under suitably reinforced gro..
270mm Cordek Cellcore Cellvent HX Cellular EPS Void Former
Cellvent HX Grade 7/10 Maximum Concrete Depth 220mm
Reinforced ground floor slabs where subsidence is not expected
Used to alleviate the effects of ground heave and gas venting
Combined ground heave protection and passive gas venting system
300mm Cellcore HG Grade 50/65 is a lightweight expanded polystyrene (EPS) insulation board designed for use in ground heave protection applications where the specification of the project mean that the standard Cellcore HX S Under Floor Slabs and Cellcore HX B Under Ground Beams products are not suit..
85x1200x1200mm Claymaster Pile Collar is a compressible low density Expanded Polystyrene (EPS) product, used when foundations need to be protected against ground heave.
The Heaveguard (Claymaster) pile collar is an engineered material in green or pink color designed to safeguard piles against upl..
Filcor 160 Cordek EPS (Expanded Polystyrene) is a lightweight structural fill material used as a void former solution for forming openings and voids within concrete structures in Hard Landscaping, Soft Landscaping, Podium Slabs, Swimming Pools, Steps, ramps and shapes.
Cordek Filcor Grade 160 is ..
Swimming Pools, Podium Slabs
Hard and Soft Landscaping, Steps, Ramps and Shapes
Pile Collar 1200x1200x155mm Claymaster (Heaveguard) is a compressible low density Expanded Polystyrene (EPS) product, used when foundations need to be protected against ground heave.
The Heaveguard (Claymaster) pile collar is an engineered material in green or pink color designed to safeguard pil..
270mm Cellvent HX Grade 9/13 is a robust void former made of Cellcore HX range with Ventform to alleviate the effects of ground heave whilst also providing an excellent gas venting.
Cordek EPS Void Former Formwork Cellvent HX 270x1200x2400mm is designed for use under suitably reinforced ground fl..
270mm Cordek Cellcore Cellvent HX Cellular EPS Void Former
Cellvent HX Grade 9/13 Maximum Concrete Depth 300mm
Reinforced ground floor slabs where subsidence is not expected
Used to alleviate the effects of ground heave and gas venting
Combined ground heave protection and passive gas venting system
Filcor 190 Cordek is a lightweight structural fill expanded polystyrene (EPS) used as a void former solution for forming openings and voids within concrete structures.
Cordek Filcor Grade 190 is calculated and calibrated for concrete thickness up to 7600mm (has been tested to achieve the specifie..
Swimming Pools, Podium Slabs
Hard and Soft Landscaping, Steps, Ramps and Shapes
270mm Cordek EPS Void Former Cellvent HX Grade 13/18 is used beneath reinforced concrete floor slabs to provide a combined ground heave protection and passive gas venting system.
Cordek EPS Void Former Formwork Cellvent HX 270x1200x2400mm is designed for use under suitably reinforced ground floor..
270mm Cordek Cellcore Cellvent HX Cellular EPS Void Former
Cellvent HX Grade 13/18 Maximum Concrete Depth 460mm
Reinforced ground floor slabs where subsidence is not expected
Used to alleviate the effects of ground heave and gas venting
Combined ground heave protection and passive gas venting system
270mm Cellvent HX Grade 18/24, consists of a moulded hexagonal EPS compressible base with Ventform to provide a combined ground heave protection and passive gas venting system.
Cordek EPS Void Former Formwork Cellvent HX 270x1200x2400mm is designed for use under suitably reinforced ground floor s..
270mm Cordek Cellcore Cellvent HX Cellular EPS Void Former
Cellvent HX Grade 18/24 Maximum Concrete Depth 660mm
Reinforced ground floor slabs where subsidence is not expected
Used to alleviate the effects of ground heave and gas venting
Combined ground heave protection and passive gas venting system