Menu
Your Cart

Cordek Filcor EPS (Structural Fill Void Former)

Filcor EPS - Lightweight Structural Fill Material (Expanded Polystyrene) High Loading
Cordek Filcor EPS (Structural Fill Void Former)
  • Swimming Pools, Podium Slabs
  • Hard and Soft Landscaping, Steps, Ramps and Shapes
  • Wide range of Compressive Strengths available
  • Flame Retardant (FR) properties - Water resistant
  • Minimum depth of 25mm and a Maximum depth of 1200mm.
Estimated delivery:
In Stock
£ 0.00
Ex VAT: £ 0.00
  • Brand: Cordek®
  • Model: Filcor EPS
  • Dimensions: 2,400mm x 1,200mm x 25mm
  • SKU: Custom - max concrete depth 800 - 7600mm
  • Product code: P1-77
  • MPN: FILCOR Custom

Options available

Cordek Filcor Void Former EPS is a lightweight but durable structural fill board used as a void former solution for forming openings and voids within a wide range of concrete structures.

The Filcor panels are a great alternative to more traditional fill materials, available in 2400mm long x 1200mm wide x selected thickness from 25mm thick all the way to 1200mm thick.

The length and width of the Filcor EPS sheets can be calibrated (maximum is a standard board size 2400mm x 1200mm).

Filcor is a versatile and durable material that can be used for a wide range of applications including: hard and soft landscaping, podium slabs, swimming pools, steps, ramps and complex shapes.

Expanded Polystyrene Filcor is increasingly being specified for an ever-growing range of applications, whether it be low loadings such as pedestrians or high loadings such as motor vehicles.

Filcor EPS is simple, cost efficient, water resistant with a very long design life insulation solution for filling voids.

All Filcor grades are manufactured with the use of a polymeric Flame Retardant (FR) additive. 

Maximum depth of concrete (assumed 25k/N/m3) for Filcor EPS 20 grade is 800mm with nominal density of 15kg per m3.

Maximum depth of concrete (assumed 25k/N/m3) for Filcor EPS 45 grade is 1800mm with nominal density of 20kg per m3.

Maximum depth of concrete (assumed 25k/N/m3) for Filcor EPS 70 grade is 2800mm with nominal density of 25kg per m3.

Maximum depth of concrete (assumed 25k/N/m3) for Filcor EPS 90 grade is 3600mm with nominal density of 30kg per m3.

Maximum depth of concrete (assumed 25k/N/m3) for Filcor EPS 100 grade is 4000mm with nominal density of 35kg per m3.

Maximum depth of concrete (assumed 25k/N/m3) for Filcor EPS 120 grade is 4800mm with nominal density of 40kg per m3.

Maximum depth of concrete (assumed 25k/N/m3) for Filcor EPS 140 grade is 5600mm with nominal density of 45kg per m3.

Maximum depth of concrete (assumed 25k/N/m3) for Filcor EPS 160 grade is 6400mm with nominal density of 50kg per m3.

Maximum depth of concrete (assumed 25k/N/m3) for Filcor EPS 190 grade is 7600mm with nominal density of 55kg per m3.

The cost of manufacturing Cordek Filcor EPS is considered linearly proportional to its density.

Filcor 20 price is the lowest compared to the other Filcor EPS grades: 45, 70, 90, 100, 120, 140, 160, 190.

Filcor is a certified product and complies with both BS EN 13163:2012 and BS EN 14933:2007.

Filcor Void Former is not soluble in water and its closed cell structure prevents the migration of water through the mass of the material.

The product is unaffected by both UV light and water.

 

Key points:

Non-toxic.

Chemically inert.

Non-irritant.

Non-biodegradable.

Insoluble and non-hygroscopic.

Wide range of compressive strengths available.

Lightweight and easy to handle and install.

Available as standard sheets or blocks.

Can be profiled to specific requirements.

Provides a high degree of insulation.

Flame Retardant (FR) properties.

 

Filcor EPS Applications:

 

Hard Landscaping:    

 · Range of compressive strengths to match specific application, whether it be low loadings such as pedestrians or high loadings such as motor vehicles.

 · Lightweight Fill Material.

 · Quick and easy to install and can be cut to create falls, steps and other features.

 · Water resistant with a very long design life.

 · Insulation Properties.

 

Soft Landscaping:

 · Quick and easy to install.

 · Can be profiled to create landscape features including complex shapes.

 · Lightweight Fill Material.

 · Water resistant with a very long design life.

 

Podium Slab:

 · Lightweight Fill Material.

 · Range of compressive strengths to match specific application, whether it be low loadings such as pedestrians or high loadings such as motor vehicles.

 · Suitable under hard and soft landscaping.

 · Insulation Properties.

 

Swimming Pools:

 · Lightweight void former profiled to create the falls at the bottom of the pool with a high degree of accuracy.

 · Simple and cost efficient solution for filling in pools that are no longer required.

 

Steps, Ramps and Shapes:

 · Off site construction method where Filcor Structural Fill can be cut and profiled prior to being delivered to site, including complex shapes.

 · Range of compressive strengths to match specific application, whether it be low loadings such as pedestrians or high loadings such as motor vehicles.

 · Simple and easy to install.

 · Lightweight Fill Material.

 

*Further information may be found in our Downloads section.

Fairly easy access to all PDF files.

Datasheet ǀ Declaration of Performance - DoP ǀ BBA Certificate ǀ Installation Guide ǀ Certificates ǀ Brochure ǀ SPEC Sheet 

 

*Special Product - Non returnable cancelable.

specification
Compressive Strength from 20 up to 190 (kPa)
Density from 15 up to 55 (kg/m3)
Length Maximum 2400mm
Material EPS (Expanded Polystyrene)
Profile Square Edge (SE)
Thermal Conductivity from 0.038 up to 0.033 (W/mK)
Thickness from 25mm up to 1200mm
Width Maximum 1200mm
Fire Classification Euroclass E
Vapour Resistivity Water resistant
BRE Green Guide Rating A+
Shipping method Rigid Vehicle ǀ Courier
Applications Structural fill material
Maximum depth of concrete from 800mm up to 7600mm
ETA Notification Yes
Features Versatile ǀ Cost effective solution

Write a review

Note: HTML is not translated!
Bad Good

We deliver insulation materials to Mainland UK only. Deliveries to Highlands, Northern Ireland, Isle of Wight etc.. might be possible at additional cost.
We offer free delivery on most of the orders above £300 (excluding VAT) (except special products - shipping cost via courier - products marked ''Request A Quote'')

Delivery of some insulation materials might be extended due to the current situation (Covid-19, stock shortages, allocations).
If you need materials quickly please contact us - we will do our best to help you source materials needed.

We do not deliver on weekends and bank holidays. Sometimes we can deliver on Saturdays - please check with us before placing the order.
If you need any further information please contact us tel. 02081910776

We can help to calculate price per m2 or linear meter (one meter in length) cost, please just contact us via phone 02081910776, email or live chat. Alternatively, you can work it out yourself quickly and easily: to get cost per meter square please divide price shown in orange area by ''Required area (m2)'' Example price of £28.80 divided by board coverage 2.88m2 = cost of £10.00 per m2.

INSTALLERS

No matter whether you choose a local installer or a national company, there’s a few tips to help you find the right installer for your home insulation improvements, such as asking for recommendations and making sure that they’re part of a certification scheme. This makes sure that they have the right skills and standards of workmanship to carry out the installation, and you can be sure that they know exactly what they are doing.

4 TIPS FOR CHOOSING THE BEST INSULATION INSTALLER

1. Thermal inspection picture in portfolio

It’s worth seeing a installer’s previous work. There’s no harm asking if you can see any properties nearby that they’ve installed insulation in. Best way would be to see Infrared Thermal Imaging Inspections. Thermal cameras spot small, but key changes in temperature in different areas of a house, identifying problematic areas that the human eye never could and some that a visual inspection could only hypothesize.

2. Reviews

Along with checking recommendations and previous work, finding reviews online can often be a great way to find out if they provide a good service or not. However, it’s best not to solely rely on reviews you may find or review websites, as there’s no controlling who writes them.

3. Compare prices

Comparing prices will also ensure companies can’t take advantage of you and give you a fair price. 

4. Word of Mouth

The best way to find a great insulation installer is through recommendations. Make sure you ask friends and family. They will most likely give you their honest opinion and can tell you from first hand experience.

 

Whether you require a wall, cladding, external wall, loft or floor insulation fitted, you can find and hire your local insulation installers from popular UK web pages. A simple internet search will return thousands of potential installers near your area.

 

https://www.nia-uk.org/find-an-installer/

https://www.checkatrade.com/

https://www.mybuilder.com/

https://www.ratedpeople.com/local-thermal-insulation

 

STOCKIST

We are the stockist of construction materials and related products for both trade and DIY from most recognizable brands in the UK like Cordek, RCM, Promat, Rockwool, Isover, Celotex, Xtratherm, Ursa, Low-E, Cedral, Kingspan, Dufaylite, British Gypsum, K-rend, Ecotherm, Iko enertherm, Kay-Metzeler, Terrawool to allow you to complete your insulation job on time at competitive prices and the highest standards.

 

Whether you are a large company or a DIYer, if you need a large amount of insulation materials, we can offer quantity discounts at the best prices. Please contact us and our friendly customer service will try to find the best and cheapest solutions for you. We value your time and we will try to deliver the products as soon as possible at a reasonable price to your construction site or house. The UK's leading insulation supplier near you and your needs. Price List available upon request.
Filcor EPS - Lightweight Structural Fill Material (Expanded Polystyrene) High Loading
Cordek Filcor EPS (Structural Fill Void Former)
£ 0.00