30mm White Tissue Faced 2 Sides Rockwool RW5 is an A1 non-combustible insulation slab, a rigid stone wool board faced with white tissue on both sides, used as a fire resistant and thermal insulation for roofs and concrete car park soffits.

This special white tissue facings on both sides helps to avoid the slab edges from showing as shadows through the perforated inner sheet and assists in preventing fibre migration, providing approx. four times less fibre migration-bullet.

The 30x600x1200mm Rockwool RW5 Insulation Slab faced with white tissue on 2 sides can provide from 30 minutes up to 240 minutes fire protection to the underside of concrete soffits and double skinned metal roofing systems.

White Tissue Faced Two Sides Rockwool RW5 (SL 960) is a high-density 100kg/m3 rigid soffit insulation slab with a certified thermal conductivity (lambda) of 0.034 W/mK and an excellent fire performance Euroclass A1.

Rockwool RW5 Slab is an ideal sound absorber as it works in two distinct ways to reduce noise, either by impeding the transmission of sound through an element of the structure or by absorption of sound at the surface.

The structure of the fibres in Rockwool RW5 insulation slabs make them ideal for use as a sound absorber with water repellent qualities of the insulation preventing moisture build up, damp and rot.

Rockwool RW5 White Tissue Faced Two Sides Slab 30mm is a robust long-lasting insulation product made from renewable resources which will maintain high performance over the lifetime of the building.

These fire, thermal and acoustic Rockwool RW5 white tissue faced two sides insulation slabs are free of CFCs and HCFCs and will not encourage the growth of fungi, mould or bacteria.

RW5 White Tissue Faced 2 Sides Slab works in two ways to reduce noise, either by absorption of sound at the surface or inhibiting its transmission.

Achieved absorption coefficient of the product will vary according to thickness and density of the slab and application where it is used.

Specification:

Thickness: 30mm

Width: 600mm

Length: 1200mm

Pack Quantity: 8

Slab Coverage: 0.72m2

Pack Coverage: 5.76m2

Front Finish: White Tissue Faced

Reverse Finish: White Tissue Faced

Core: Stone Wool RW5 (ProRox SL 960)

Density: 100kg/m3 

R-Value: 0.85m2K/W

Thermal Conductivity: 0.034W/mK

Vapour Resistivity: Negligable, Water Repellent

Building Regulations: Class ‘O’ 

Fire performance: Euroclass A1 (non-combustible)

White Tissue Faced 2 Sides Rockwool RW5 (100kg) Insulation Slab Installation Guide:

 · When fixing a tile or modular system, it is advisable to start with a focus reference slab in the centre of the soffit with subsequent slabs being fixed working towards each edge.

 · The use of string lines or laser alignment equipment will assist in ensuring alignment and squareness of the installation.

 · If RW5 is installed into a concrete or steel composite deck, a pilot hold should first be drilled prior to the fixing being screwed into place.

 · Rockwool RW5 Soffit and Roof Slabs should be fixed directly to the concrete soffit using Ejot DDS fixings with the Ejot DDT70 washer or similar.

 · Care should be taken not to over-tighten fixings to prevent damage to the white tissue faced slab surface.

 · For further information on fixing type and suitability for the substrate, please refer to the fixing manufacturer.

 · It is recommended that all white tissue faced slab joints should be staggered and tightly butt jointed.

 · Soffit insulation RW5 slabs should not be used for supporting light fittings or services.

 · Such installations should be supported from the concrete soffit.

 · Where penetrations occur, the boards should be cut locally to ensure a tight fit around the penetration.

 · White Tissue Faced RW5 Slabs can be cut slightly oversized to ensure a tight fit under slight compression around the penetration.

 · Any small gaps that result from cutting can be infilled using the Acoustic Intumescent Sealant.

RW5 White Tissue Faced Two Sides Slab Health and Safety Regulations:

 · The safety of Rockwool stone wool is confirmed by current UK and Republic of Ireland health & safety regulations.

 · We advise you to use PPE (personal protective equipment) including some gloves and a face mask.

 · Rockwool stone wool insulation fibres are not classified as a possible human carcinogen.

 · The mechanical effect of fibres in contact with skin may cause temporary itching.

 · Cover exposed skin during the handling and installation process.

 · When working in an unventilated area, wear a disposable face mask.

 · Clean working area using vacuum equipment.

 · Waste should be disposed of according to local regulations.

 · Rinse in cold water before washing.

 · Ventilate the working area if possible.

 · Wear goggles when working overhead.

*Further information may be found in our Downloads section.

Fairly easy access to all PDF files.

Datasheet ǀ Declaration of Performance - DoP ǀ BBA Certificate ǀ Installation Guide ǀ Certificates ǀ Brochure ǀ SPEC Sheet