40mm Foil Faced Fire Slab Rockwool RW3 (7.20m² / pack) is a class 'O' foil faced fire and acoustic stone wool core insulation slab developed to prevent the spread of flames and inhibit heat and smoke through concealed spaces in buildings.

Rockwool RW3 Foil Faced Slabs (60kg per m3) are simple butt joint products that can be used where fire resistant walls need to be continued above a ceiling into the roof void.

Foil Faced Fire Slabs conform with the Building Regulations Approved Document B and fulfil all normal fire insulation requirements for division of space.

Rockwool RW3 Foil Backed Slab is a non-combustible aluminium foil faced fire slab with a great fire performance classified as Euroclass A1, suitable for both new build and refurbishment projects.

RW3 Foil Faced Fire Slab 40mm x 600mm x 1200mm fire performance integrity is 240 minutes, and 60 minutes for the insulation core with a certified thermal conductivity (lambda value) of 0.037W/mK.

Foil Faced Fire Slab offers excellent thermal, acoustic and fire insulation properties, is water repellent, durable, cost effective, easy to handle and install solution.

Special sizes and thicknesses of Rockwool RW3 are available, made to order: black or white tissue and aluminium foil facings on one or both sides are available in 600mm x 1200mm insulation slabs.

Rockwool RW3 insulation does not contain gases that have ozone depletion potential (ODP) or global warming potential (GWP).

Specification:

Thickness: 40mm

Width: 600mm

Length: 1200mm

Pack Quantity: 10

Slab Coverage: 0.72m2

Pack Coverage: 7.20m2

Finish: Foil Faced

Density: 60kg/m3 

R-Value: 1.15m2K/W

Thermal Conductivity: 0.034W/mK

Vapour Resistivity: Negligable, Water Repellent

Building Regulations: Class ‘O’ 

Fire performance: Euroclass A1 (non-combustible)

Foil Faced Fire Slab Rockwool RW3 Key points:

 · Aluminium foil faced fire and acoustic stone wool core insulation slab.

 · Excellent thermal, acoustic and fire performance.

 · Non-combustible Euroclass A1 material.

 · Easy to handle, cut and install.

 · Offers the highest level of fire resistance.

 · Durable insulation solution.

 · Maintain high performance over the lifetime of the building. 

 · Water repellent qualities.

 · Prevent moisture build up, damp and rot.

 · Excellent sound absorption characteristics provide high levels of sound reduction. 

 · Thermal conductivity (λ - lambda value) of 0.034W/mK.

 · Free from CFCs, HCFCs.

 · ODP free.

 · GWP free.

Rockwool Certification, Standards and Approvals:

 · Fire Slab has been independently tested and assessed to BS 476: Part 20 and Part 22 by accredited laboratories.

 · Rockwool achieves a reaction to fire classification of A1 as defined in BS EN 13501:1.

 · They are third party approved for performance and quality by the Loss Prevention Council Certification board (LPCB) and are listed in their Fire and Security ‘Red Book’ - certificate no. 022c/02.

 · The product has been authorised for use in LUL surface and sub-surface premises when installed in accordance with the data sheet.

 · Rockwool Fire Slab has been tested in accordance with BS EN ISO 10140-2:2010 achieving Rw 23dB. Test Report N° C/23667/T01.

 · The safety of Rockwool stone wool is confirmed by current UK and Republic of Ireland health and safety regulations and EU directive 97/69/EC:Rockwool fibres are not classified as a possible human carcinogen.

 · Made from a renewable and plentiful naturally occuring resource, Rockwool insulation saves fuel costs and energy in use and relies on trapped air for its thermal properties.

 · Rockwool is approximately 97% recyclable.

*Further information may be found in our Downloads section.

Fairly easy access to all PDF files.

Datasheet ǀ Declaration of Performance - DoP ǀ BBA Certificate ǀ Installation Guide ǀ Certificates ǀ Brochure ǀ SPEC Sheet