Largely manufactured from recycled glass (e.g. windscreens) and mineral base materials such as sand and without the use of binding agents. The ingredients are melted into molten glass, which is cooled and crushed into a fine powder. The powdered glass is poured into molds and heated (below the melting point) in a "sintering" process that causes the particles to adhere to one another. Next, a small amount of finely ground carbon-black is added and the material is heated in a "cellulation" process. Here, the carbon reacts with oxygen, creating carbon dioxide, which creates the insulating bubbles in the (material). CO2 accounts for more than 99% of the gas in the cellular spaces.
Cellulose insulation is a material made from recycled newspaper. The paper is shredded and inorganic salts, such as boric acid, are added for resistance to fire, mould, insects and vermin. The insulation is installed either blown or damp-sprayed depending on application.
Wood fibre
The success of wood fibre insulation derives from an attractive environmental profile combined with a whole bag of functions including rigid insulation, sheathing and sarking for timber frames, roofs and flooring as well as flexible insulation for studs and rafters.
Wood of course is renewable, it sequesters carbon during its growth and product production is relatively free from pollution. The insulation value of wood fibre boards is not as dimensionally efficient as some of the orthodox petro-chemical materials - but it's no slouch either - typically coming in with a 'k value' range of between 0.038-0.043 W/mK depending on format.
Hemp
Hemp fibres are produced from hemp straw of the hemp plant. Most hemp is imported, but an increasing amount of home-grown crop is becoming available. Hemp grows up to a height of nearly 4 metres within a period of 100-120 days. Because the plants shade the soil, no chemical protection or toxic additives are required for hemp cultivation. The product is composed of, usually, 85% hemp fibre with the ballance made up of polyester binding and 3-5% soda added for fire proofing.
Straw
Straw is an agricultural by-product, the dry stalks of cereal plants, after the grain and chaff have been removed. Straw makes up about half of the yield of cereal crops such asbarley, oats, rice, rye and wheat.
15mm PIR Rigid Insulation Board Xtratherm (Unilin) 1200mm x 1200mm is a thinnest rigid foil faced polyisocyanurate (PIR) thermal foam insulation board designed for roofs, walls, floors, timber and steel framed systems.
Unilin (Xtratherm) PIR insulation boards are stable, rot proof and will remain..
1200mm x 1200mm x 15mm
Foil Faced PIR Rigid Foam Insulation Board
Certified thermal conductivity as low as 0.022W/mK!
15mm Unilin XT/PR Thin-R Pitched Roof PIR Insulation Board is a thinnest PIR rigid thermal foam insulation board used in roof construction to achieve Future Home and Passive House Standards.
XT/PR Unilin PIR Board is a high performance foil faced rigid insulation foam with a certified thermal con..
15mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
15mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
15mm Unilin XT/TF Thin-R Timber Frame Insulation Board is a thinnest PIR rigid thermal foam insulation board used in wall construction to achieve Future Home and Passive House Standards.
XT/TF Unilin PIR Board is a high performance foil faced rigid insulation foam with a certified thermal conduct..
15mm Unilin XT/UF Thin-R Floor Insulation Board is a thinnest PIR rigid thermal foam insulation board used in floor construction to achieve Future Home and Passive House Standards.
XT/UF Underfloor Unilin PIR Board is a high performance insulation with a certified thermal conductivity of 0.022W/m..
15mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
15mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
15mm Unilin (Xtratherm) Thin-R Insulation Board (2400mm x 1200mm x 15mm) is an ultra thin rigid foil faced polyisocyanurate (PIR) thermal foam multi-application insulation board designed for roofs, walls, floors, timber and steel framed systems.
Xtratherm (Unilin) Thin-R range is a high-efficienc..
Ceresit CT16 is a high-quality Priming Paint designed to add powerful adhesion between insulated render system layers.
Thanks to its rough structure CT16 primer strengthening the whole system and prevent stains formation on the final thin coat render.
CT16 paint can be applied to the surfaces..
BBA Certificate No. 14/5142
Assumed consumption: from 0.2 to 0.35 l/m2 / from 0.3 to 0.5 kg/m2 depending on the smoothness and absorption of the substrate
Approximate coverage per one bucket - 35m2 (15kg)
Temperature of application: from +5 °C to +25 °C
Easier application of plasters - Higher adhesion to the substrate - Ready to use
Antique White Primer TC15 is a low odour, ready to use primer which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base Coat..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Antique White K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attract..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
20mm Unilin XT/PR Thin-R Pitched Roof PIR Insulation Board is a rigid thermal foam insulation board used in roof construction, designed to achieve Future Home and Passive House Standards.
XT/PR PIR Board 20mm is a high performance foil faced insulation foam board with a certified thermal conducti..
20mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
20mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
20mm Unilin PIR Insulation Board XT/TF Timber Frame is used between studs or as an insulating sheathing material for steel and timber framing wall applications.
XT/TF Unilin PIR Board is a high performance foil faced rigid insulation foam with a certified thermal conductivity of 0.022W/mK which h..
20mm Unilin XT/UF Thin-R Floor Insulation Board is a rigid thermal foam insulation board used in floor construction, designed to achieve Future Home and Passive House Standards.
XT/UF Underfloor Unilin PIR Board is a high performance insulation with a certified thermal conductivity of 0.022W/mK w..
20mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
20mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
Ash White Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base C..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Ash White K Rend Silicone TC is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attractive, lo..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
25mm Unilin XT/UF Thin-R Floor Insulation Board is a polyisocyanurate rigid foam insulation board used in floor construction, designed to achieve Future Home and Passive House Standards.
XT/UF Underfloor Unilin PIR Board is a high performance insulation with a certified thermal conductivity of 0...
25mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
25mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
25mm Unilin XT/PR Thin-R Insulation Board is a polyisocyanurate rigid foam insulation board used in roof construction, designed to achieve Future Home and Passive House Standards.
XT/PR PIR Board is a high performance foil faced insulation foam board with a certified thermal conductivity of 0.022..
25mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
25mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
25mm Wall Insulation Board Unilin Thin-R XT/TF is a rigid foam insulation board used between studs or as an insulating sheathing material for steel and timber framing wall applications.
XT/TF Unilin PIR Board is a high performance foil faced rigid insulation foam with a certified thermal conducti..
Biscuit Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base Coa..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Biscuit K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attractive, l..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
30mm Unilin XT/PR Thin-R PIR Foam Insulation Board is an easy to install rigid insulation board used in roof construction, designed to achieve Future Home and Passive House Standards.
XT/PR PIR Board is a high performance foil faced insulation foam board with a certified thermal conductivity of 0..
30mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
30mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
30mm Unilin Thin-R XT/TF PIR Rigid Foam Insulation is a polyisocyanurate (PIR) insulation board used in wall construction, designed to achieve Future Home and Passive House Standards.
XT/TF Unilin PIR Board is a high performance foil faced rigid insulation foam with a certified thermal conductivi..
30mm Unilin XT/PR Thin-R PIR Foam Insulation Board is an easy to install rigid insulation board used in floor construction, designed to achieve Future Home and Passive House Standards.
XT/UF Underfloor Unilin PIR Board is a high performance insulation with a certified thermal conductivity of 0.02..
30mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
30mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
Causeway Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base Co..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Causeway K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attractive, ..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
35mm Unilin XT/PR Thin-R Board is comprising a rigid Polyisocyanurate (PIR) core sandwiched between low emissivity foil facings designed to achieve Future Home and Passive House Standards.
XT/PR PIR Board is a high performance foil faced insulation foam board with a certified thermal conductivity..
35mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
35mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
35mm Unilin Thin-R PIR XT/TF (Walls) is an insulation board suitable for use with timber frame and steel frame wall constructions in new build and refurbishment projects.
XT/TF Unilin PIR Board is a high performance foil faced rigid insulation foam with a certified thermal conductivity of 0.022W/..
35mm Unilin XT/UF Thin-R Floor Board is comprising a rigid PIR core sandwiched between low emissivity foil facings designed to achieve Future Home and Passive House Standards.
XT/UF Underfloor Unilin PIR Board is a high performance insulation with a certified thermal conductivity of 0.022W/mK whi..
35mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
35mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
Corn Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base Coat (..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Corn K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attractive, low ..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
40mm Unilin XT/PR Thin-R Board is a foil faced Polyisocyanurate (PIR) rigid foam insulation board used as a pitched roof insulation to achieve Future Home and Passive House Standards.
XT/PR PIR Board is a high performance foil faced insulation foam board with a certified thermal conductivity of 0..
40mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
40mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
40mm Unilin XT/TF Thin-R PIR Wall Insulation Sheet is a rigid foam insulation board suitable for use with timber frame and steel frame wall constructions in new build and refurbishment projects.
XT/TF Unilin PIR Board is a high performance foil faced rigid insulation foam with a certified thermal..
40mm Unilin XT/UF Thin-R Floor Board is a foil faced Polyisocyanurate (PIR) rigid foam insulation board used as a underfloor insulation to achieve Future Home and Passive House Standards.
XT/UF Underfloor Unilin PIR Board is a high performance insulation with a certified thermal conductivity of 0..
40mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
40mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
Golden Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base Coat..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Golden K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attractive, lo..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
45mm Unilin XT/PR Thin-R Insulation Board is a PIR rigid foam insulation board used in roof construction, designed to achieve Future Home and Passive House Standards.
XT/PR PIR Board is a high performance foil faced insulation foam board with a certified thermal conductivity of 0.022W/mK which he..
45mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
45mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
45mm Unilin XT/TF Thin-R Timber Frame Insulation Sheet is a foil faced insulation board suitable for use with timber frame and steel frame wall constructions in new build and refurbishment projects.
XT/TF Unilin PIR Board is a high performance foil faced rigid insulation foam with a certified the..
45mm Unilin XT/UF Thin-R Underfloor Insulation Board is a PIR rigid foam insulation board used in floor construction, designed to achieve Future Home and Passive House Standards.
XT/UF Underfloor Unilin PIR Board is a high performance insulation with a certified thermal conductivity of 0.022W/mK ..
45mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
45mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
Granite Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base Coa..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Granite K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attractive, l..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
50mm Unilin XT/TF Thin-R Wall Board is a PIR rigid foam insulation board suitable for use with timber frame and steel frame wall constructions in new build and refurb projects.
XT/TF Unilin PIR Board is a high performance foil faced rigid insulation foam with a certified thermal conductivity of 0..
50mm Unilin XT/UF Thin-R is a versatile rigid foam insulation board used in ground supported floor slab construction, designed to achieve Future Home and Passive House Standards.
XT/UF Underfloor Unilin PIR Board is a high performance insulation with a certified thermal conductivity of 0.022W/mK ..
50mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
50mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
50mm Unilin XT/PR Thin-R Pitched Roof Insulation Board is a versatile rigid foam insulation board used in roof construction, designed to achieve Future Home and Passive House Standards.
XT/PR PIR Board is a high performance foil faced insulation foam board with a certified thermal conductivity of..
50mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
50mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
Light Bronze Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Bas..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Light Bronze K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attracti..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
55mm Unilin XT/PR Thin-R Pitched Roof PIR Insulation Board is a rigid foam insulation board used in roof construction, designed to achieve Future Home and Passive House Standards.
XT/PR PIR Board is a high performance foil faced insulation foam board with a certified thermal conductivity of 0.022..
55mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
55mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
55mm Unilin XT/TF Thin-R Timber Frame PIR Rigid Foam Insulation Board is used between studs or as an insulating sheathing material for steel and timber framing wall constructions.
XT/TF Unilin PIR Board is a high performance foil faced rigid insulation foam with a certified thermal conductivity o..
55mm Unilin XT/UF Thin-R Insulation for Ground Supported Floor Slab is a rigid foam insulation sheet used in floor construction, designed to achieve Future Home and Passive House Standards.
XT/UF Underfloor Unilin PIR Board is a high performance insulation with a certified thermal conductivity of..
55mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
55mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
Limestone White Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of ..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Limestone White K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attra..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
60mm Unilin XT/TF Timber Frame PIR Board (Thin-R) is a rigid foam insulation board used between studs or as an insulating sheathing material for timber framing wall constructions.
XT/TF Unilin PIR Board is a high performance foil faced rigid insulation foam with a certified thermal conductivity o..
60x1200x2400mm Unilin XT/PR Insulation Board is a PIR rigid foam insulation board used in roof construction, designed to achieve Future Home and Passive House Standards.
Unilin XT/PR is a high performance foil faced insulation foam board with a certified thermal conductivity of 0.022W/mK which he..
60mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
60mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
60mm x 1200mm x 2400mm Unilin XT/UF Insulation Board is a PIR rigid foam insulation board used in floor construction, designed to achieve Future Home and Passive House Standards.
XT/UF Underfloor Unilin PIR Board is a high performance insulation with a certified thermal conductivity of 0.022W/mK ..
60mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
60mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
Linen Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base Coat ..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Linen K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attractive, low..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
65mm Unilin XT/PR Thin-R PIR Insulation Board is a rigid foil faced foam insulation board used in roof construction, designed to achieve Future Home and Passive House Standards.
Unilin XT/PR is a high performance foil faced insulation foam board with a certified thermal conductivity of 0.022W/mK ..
65mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
65mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
65mm Unilin XT/TF Thin-R Wall Insulation is a PIR rigid foam insulation board used between studs or as an insulating sheathing material for steel and timber framing wall constructions.
XT/TF Unilin PIR Board is a high performance foil faced rigid insulation foam with a certified thermal conductiv..
65mm Unilin XT/UF Thin-R PIR Insulation Board is a rigid foil faced foam insulation board used in floor construction, designed to achieve Future Home and Passive House Standards.
XT/UF Underfloor Unilin PIR Board is a high performance insulation with a certified thermal conductivity of 0.022W/mK ..
65mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
65mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
Mink Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base Coat (..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Mink K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attractive, low ..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
70mm Unilin XT/PR Thin-R is a roof insulation board used mainly in pitched roof construction, designed to achieve Future Home and Passive House Standards.
XT/PR is a high performance foil faced insulation foam board with a certified thermal conductivity of 0.022W/mK which helps to reduce thermal ..
70mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
70mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
70mm Unilin XT/TF (WALLS) Thin-R PIR Insulation Board is a foam insulation board used between studs or as an insulating sheathing material for steel and timber framing wall constructions.
XT/TF Unilin PIR Board is a high performance foil faced rigid insulation foam with a certified thermal conduc..
70mm Unilin XT/UF Thin-R is a floor insulation board used as an insulation for ground supported floor slab construction, designed to achieve Future Home and Passive House Standards.
XT/UF Underfloor Unilin PIR Board is a high performance insulation with a certified thermal conductivity of 0.022W/..
70mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
70mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
Mint Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base Coat (..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Mint K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attractive, low ..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
75mm Unilin XT/PR Thin-R is a pitched roof insulation board with rigid PIR foam core sandwiched between low emissivity foil facings used for under rafter or between and over joist applications.
XT/PR is a high performance foil faced insulation foam board with a certified thermal conductivity of 0..
75mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
75mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
75mm XT/TF Thin-R Unilin Wall PIR Insulation Board is a rigid foam insulation board with foil facers used between studs or as an insulating sheathing material for timber frame walls.
XT/TF Unilin PIR Board is a high performance foil faced rigid insulation foam with a certified thermal conductivit..
Unilin XT/UF Thin-R is a 75mm floor insulation board with rigid PIR foam core sandwiched between low emissivity foil facings used mainly as an insulation board for floor construction.
XT/UF Underfloor Unilin PIR Board is a high performance insulation with a certified thermal conductivity of 0.022..
75mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
75mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
Mocha Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base Coat ..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Mocha K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attractive, low..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
80mm Unilin XT/PR Thin-R Pitched Roof PIR Insulation Board is an insulation sheet suitable for tiled or slated pitched warm roof spaces for both new build and refurbishment projects.
XT/PR is a high performance foil faced insulation foam board with a certified thermal conductivity of 0.022W/mK wh..
80mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
80mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
80mm Timber Frame PIR Insulation Board Unilin XT/TF Thin-R is suitable for use with timber frame and steel frame wall constructions in new build and refurbishment projects.
XT/TF Unilin PIR Board is a high performance foil faced rigid insulation foam with a certified thermal conductivity of 0.022..
80mm Unilin XT/UF Thin-R Floor PIR Rigid Foam Insulation Board is an insulation sheet suitable for ground supported floor slab for both new build and refurbishment projects.
XT/UF Underfloor Unilin PIR Board is a high performance insulation with a certified thermal conductivity of 0.022W/mK which..
80mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
80mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
Pearl Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base Coat ..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Pearl K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attractive, low..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
90mm Unilin XT/PR Thin-R Pitched Roof PIR Insulation Board is used for under rafter or between and over joist applications in tiled or slated pitched warm roof spaces.
XT/PR is a high performance foil faced insulation foam board with a certified thermal conductivity of 0.022W/mK which helps to re..
90mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
90mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
90mm Unilin XT/TF Thin-R Wall Insulation is a PIR rigid foam insulation board used in steel and timber framing wall construction, designed to achieve Future Home and Passive House Standards.
XT/TF Unilin PIR Board is a high performance foil faced rigid insulation foam with a certified thermal con..
90mm Unilin XT/UF Thin-R Floor PIR Board is a rigid foam insulation sheet suitable for ground supported floor slab, XT/UF can be used for both new build and refurbishment projects.
XT/UF Underfloor Unilin PIR Board is a high performance insulation with a certified thermal conductivity of 0.022W/m..
90mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
90mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
Pistachio Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base C..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Pistachio K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attractive,..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
100mm Unilin XT/PR Thin-R Pitched Roof PIR Rigid Insulation Board is suitable for tiled or slated pitched warm roof spaces for both new build and refurbishment projects.
XT/PR is a high performance foil faced insulation foam board with a certified thermal conductivity of 0.022W/mK which helps to ..
100mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
100mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
100mm Unilin XT/TF Thin-R is a rigid foam insulation sheet suitable for steel and timber framing wall constructions, XT/UF can be used for both new build and refurbishment projects.
XT/TF Unilin PIR Board is a high performance foil faced rigid insulation foam with a certified thermal conductivity..
100mm Unilin XT/UF Thin-R Floor Insulation Board is a PIR rigid foam insulation board used to insulate solid concrete, suspended ground floors and for use with underfloor heating systems.
XT/UF Underfloor Unilin PIR Board is a high performance insulation with a certified thermal conductivity of 0..
100mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
100mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
Pure White Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base ..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Pure White K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attractive..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
110mm Unilin XT/PR Thin-R is a PIR pitched roof insulation board with rigid foam core sandwiched between aluminium foil facings used for under rafter or between and over joist applications.
XT/PR is a high performance foil faced insulation foam board with a certified thermal conductivity of 0.022..
110mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
110mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
110mm XT/TF Unilin Thin-R Wall Insulation Board is a rigid insulation board used between studs or as an insulating sheathing material for steel and timber framing wall applications.
XT/TF Unilin PIR Board is a high performance foil faced rigid insulation foam with a certified thermal conductivity..
110mm Unilin XT/UF Thin-R Floor Board is a foil faced on both sides rigid foam insulation board used to insulate solid concrete, suspended ground floors and for use with underfloor heating systems.
XT/UF Underfloor Unilin PIR Board is a high performance insulation with a certified thermal conduct..
110mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
110mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
Rosemary Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base Co..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Rosemary K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attractive, ..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
120mm Unilin XT/UF Thin-R Floor PIR Rigid Foam Insulation Board is used to insulate solid concrete, suspended ground floors and for use with underfloor heating systems.
XT/UF Underfloor Unilin PIR Board is a high performance insulation with a certified thermal conductivity of 0.022W/mK which help..
120mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
120mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
120mm Unilin XT/PR Thin-R is lightweight, easy to install and combines high compressive strength with low thermal conductivity, providing a high performance solution for roof insulation.
XT/PR is a high performance foil faced insulation foam board with a certified thermal conductivity of 0.022W/m..
120mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
120mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
120mm Wall Insulation Board XT/TF Unilin Thin-R PIR is a thermal foam insulation board used between studs or as an insulating sheathing material for steel & timber frame wall construction.
XT/TF Unilin PIR Board is a high performance foil faced rigid insulation foam with a certified thermal condu..
Sky Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base Coat (H..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Sky K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attractive, low m..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
130mm Unilin XT/TF Thin-R Wall Insulation Board (PIR) is a rigid thermal foam insulation board used in wall construction, designed to achieve Future Home and Passive House Standards.
XT/TF Unilin PIR Board is a high performance foil faced rigid insulation foam with a certified thermal conductivit..
130mm Unilin XT/UF Thin-R Floor Insulation Sheet is a polyisocyanurate (PIR) rigid foam board used to insulate solid concrete, suspended ground floors and for use with underfloor heating systems.
XT/UF Underfloor Unilin PIR Board is a high performance insulation with a certified thermal conductiv..
130mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
130mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
Sunflower Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base C..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Sunflower K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attractive,..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
130mm Unilin XT/PR is an insulation board with a rigid foam polyisocyanurate (PIR) insulation core, faced on both sides with an aluminium foil used for under rafter or between and over joist applications.
XT/PR Thin-R is a high performance foil faced insulation foam board with a certified thermal..
130mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
130mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
140mm Unilin XT/PR Insulation Board is an easy to install roof board with high compressive strength and low thermal conductivity, providing a high performance solution for roof insulation.
XT/PR Thin-R is a high performance foil faced insulation foam board with a certified thermal conductivity of..
140mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
140mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
140mm Unilin XT/TF Thin-R PIR Rigid Wall Board is a PIR (polyisocyanurate) rigid foam insulation board used in wall construction, designed to achieve Future Home and Passive House Standards.
XT/TF Unilin PIR Board is a high performance foil faced rigid insulation foam with a certified thermal con..
140mm Unilin XT/UF Thin-R is a rigid foam insulation board suitable for use below the screed, in block and beam floors, concrete slab floors or beneath concrete and for supporting floating floors.
XT/UF Underfloor Unilin PIR Board is a high performance insulation with a certified thermal conducti..
140mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
140mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
150mm Xtratherm Thin-R is a rigid foil faced polyisocyanurate (PIR) thermal foam insulation board designed for all types of small and large projects.
Thin-R Rigid Insulation Board (2400mm x 1200mm x 150mm) is a multi-application product designed for roofs, walls, floors, timber and steel framed s..
Wheaten Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base Coa..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Wheaten K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attractive, l..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
150mm Unilin XT/PR is a pitched roof insulation board with rigid PIR foam core sandwiched between low emissivity foil facings used for under rafter or between and over joist applications.
XT/PR Thin-R is a high performance foil faced insulation foam board with a certified thermal conductivity of ..
150mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
150mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
150mm Unilin XT/TF Thermal Foam Insulation Board is comprising a rigid PIR core sandwiched between foil facings designed to achieve Future Home and Passive House Standards.
XT/TF Unilin PIR Board is a high performance foil faced rigid insulation foam with a certified thermal conductivity of 0.022..
150mm Unilin Thin-R XT/UF PIR Floor Board is a rigid foam insulation board used below the screed, in block and beam floors, concrete slab floors or beneath concrete and for supporting floating floors.
XT/UF Underfloor Unilin PIR Board is a high performance insulation with a certified thermal cond..
150mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
150mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
165mm Floor Board Unilin Thin-R XT/UF PIR Rigid Foam Insulation is used below the screed, in block and beam floors, concrete slab floors or beneath concrete and for supporting floating floors.
XT/UF Underfloor Unilin PIR Board is a high performance insulation with a certified thermal conductivity..
165mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
165mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
165mm Unilin XT/PR is the thickest roof insulation board with rigid PIR foam core sandwiched between low emissivity foil facings used for under rafter or between and over joist applications.
XT/PR Thin-R is a high performance foil faced insulation foam board with a certified thermal conductivity ..
165mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
165mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
165mm Unilin Thin-R XT/TF is the thickest wall insulation board with rigid PIR foam core sandwiched between aluminium foil facings used between studs or as an insulating sheathing material.
XT/TF Unilin PIR Board is a high performance foil faced rigid insulation foam with a certified thermal cond..