Menu
Your Cart

K-Rend TC15 Silicone Render Thin-Coat 1.5mm ǀ Golden

K-REND TC 15 Silicone Thin Coat 1.5mm grain - K Render-Golden
K-REND TC 15 Silicone Thin Coat 1.5mm grain - K Render-Golden
LEAD TIME 3-4 WEEKS
K-REND TC 15 Silicone Thin Coat 1.5mm grain - K Render-Golden
K-REND TC 15 Silicone Thin Coat 1.5mm grain - K Render-Golden
K-Rend TC15 Silicone Render Thin-Coat 1.5mm ǀ Golden
  • Coverage approx. 10m2 per 25kg bucket
  • Ready to use - supplied in 25kg buckets
  • Do not apply onto damp or frozen substrates
  • Application temperature should be a minimum of 5°C
  • Do not apply in conditions of strong sunshine or wind
Estimated delivery:
In Stock
£ 83.70
Ex VAT: £ 69.75
  • Brand: K Rend®
  • Model: TC 15
  • Weight: 25.00kg
  • SKU: Golden
  • Product code: P1-912
  • MPN: K-Rend TC15 Thin Coat - Golden

Options available

Golden K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.

If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attractive, low maintenance textured finish.

K Rend Silicone TC incorporates the benefits of silicone technology to provide a water repellent final surface which gives excellent protection.

The silicone allows water vapour to pass freely through the render whilst allowing the finish to remain weather resistant.

K Rend Silicone TC contains a biocide to help prevent infection from moulds, yeasts and algae and it has a low susceptibility to soiling and contamination.

K Rend Silicone TC is a low odour, ready to use organic resin render which is quick and easy to apply and is available in a wide range of colours.

It provides excellent adhesion and application properties and, following appropriate preparation, can be applied to a wide variety of substrates.

K Rend Silicone TC is a cement-free render with superior flexibility.

Although primarily for external application, K Rend Silicone TC can be used internally.

 

Key points:

Silicone technology provides excellent protection, with a water repellent & breathable finish

Available in a range of attractive textured finishes and colours

Ready to use, supplied in 25kg buckets

Low odour and easy to apply

Silicone TC 15 – largest grain 1.5mm; coverage is approximately 10m2 per 25kg bucket or 2.5kg/m2

Coverage may vary depending on the substrate and application technique..

 

Preparation:

Backgrounds should be clean, level, dry and free from efflorescence.

Mask all adjacent surfaces including windows, sills, doors, timber, glass, brick & flooring

Protect weather exposed surfaces.

 

Application:

The temperature of the substrate and surrounding air should be a minimum of 5°C

Do not apply in conditions of strong sunshine or wind

Do not apply onto damp or frozen substrates

Allow freshly applied render basecoats a minimum of 14 days before work commences

Scaffolding should be brushed clean of all dust and debris, prior to application

Stir the bucket contents thoroughly using a slow speed mixer prior to use

Complete continuous surfaces without interruption, working to a wet edge at all times

Drying times may be prolonged by lower temperatures and/or high humidity

The applied TC render must be protected from rain and rainwater damage while drying

 

Packaging & Storage:

K Rend Silicone TC is packaged in 25 kg plastic tubs.

The shelf life is approximately one year if stored off the ground in original, sealed containers and protected against frost and away from direct sunlight.

 

Certification:

BBA Approval 13/5080

BBA Approval 97/3428

Product classification according to BS EN 15824:2009

Coating Material DIN 18558 – P Org 1

A water-dilutable product for exterior and interior use

Water vapour permeability – Category V 

Water absorption – Category W 3

Adhesion - 0.65 MPa

Thermal Conductivity:

10, dry (P=50%) = 0.83

10, dry (P=90%) = 0.93

Reaction to fire - Class B-s2,d0

Product Classification (DIN 18558)

Coating Material DIN 18558 – P Org 1

 

*Further information may be found in our Downloads section.

Fairly easy access to all PDF files.

Datasheet ǀ Declaration of Performance - DoP ǀ BBA Certificate ǀ Installation Guide ǀ Certificates ǀ Brochure ǀ SPEC Sheet 

 

*Special Product - Non returnable cancelable.

specification
Board covarage 10.00 m2
Colour Golden
Consistancy Ready to use render
Material Silicone resin emulsion
Shelf Life approx. one year
Finish 1.5mm grain
Application Temperature from +5 °C to +25 °C
Shipping method Rigid Vehicle ǀ Courier
Applications Indoor ǀ Outdoor ǀ Façade
BBA Certified YES
ETA Notification Yes
Features Low maintenance textured finish
Manufacturer K-Rend®

Write a review

Note: HTML is not translated!
Bad Good

We deliver insulation materials to Mainland UK only. Deliveries to Highlands, Northern Ireland, Isle of Wight etc.. might be possible at additional cost.
We offer free delivery on most of the orders above £300 (excluding VAT) (except special products - shipping cost via courier - products marked ''Request A Quote'')

Delivery of some insulation materials might be extended due to the current situation (Covid-19, stock shortages, allocations).
If you need materials quickly please contact us - we will do our best to help you source materials needed.

We do not deliver on weekends and bank holidays. Sometimes we can deliver on Saturdays - please check with us before placing the order.
If you need any further information please contact us tel. 02081910776

We can help to calculate price per m2 or linear meter (one meter in length) cost, please just contact us via phone 02081910776, email or live chat. Alternatively, you can work it out yourself quickly and easily: to get cost per meter square please divide price shown in orange area by ''Required area (m2)'' Example price of £28.80 divided by board coverage 2.88m2 = cost of £10.00 per m2.

INSTALLERS

No matter whether you choose a local installer or a national company, there’s a few tips to help you find the right installer for your home insulation improvements, such as asking for recommendations and making sure that they’re part of a certification scheme. This makes sure that they have the right skills and standards of workmanship to carry out the installation, and you can be sure that they know exactly what they are doing.

4 TIPS FOR CHOOSING THE BEST INSULATION INSTALLER

1. Thermal inspection picture in portfolio

It’s worth seeing a installer’s previous work. There’s no harm asking if you can see any properties nearby that they’ve installed insulation in. Best way would be to see Infrared Thermal Imaging Inspections. Thermal cameras spot small, but key changes in temperature in different areas of a house, identifying problematic areas that the human eye never could and some that a visual inspection could only hypothesize.

2. Reviews

Along with checking recommendations and previous work, finding reviews online can often be a great way to find out if they provide a good service or not. However, it’s best not to solely rely on reviews you may find or review websites, as there’s no controlling who writes them.

3. Compare prices

Comparing prices will also ensure companies can’t take advantage of you and give you a fair price. 

4. Word of Mouth

The best way to find a great insulation installer is through recommendations. Make sure you ask friends and family. They will most likely give you their honest opinion and can tell you from first hand experience.

 

Whether you require a wall, cladding, external wall, loft or floor insulation fitted, you can find and hire your local insulation installers from popular UK web pages. A simple internet search will return thousands of potential installers near your area.

 

https://www.nia-uk.org/find-an-installer/

https://www.checkatrade.com/

https://www.mybuilder.com/

https://www.ratedpeople.com/local-thermal-insulation

 

STOCKIST

We are the stockist of construction materials and related products for both trade and DIY from most recognizable brands in the UK like Cordek, RCM, Promat, Rockwool, Isover, Celotex, Xtratherm, Ursa, Low-E, Cedral, Kingspan, Dufaylite, British Gypsum, K-rend, Ecotherm, Iko enertherm, Kay-Metzeler, Terrawool to allow you to complete your insulation job on time at competitive prices and the highest standards.

 

Whether you are a large company or a DIYer, if you need a large amount of insulation materials, we can offer quantity discounts at the best prices. Please contact us and our friendly customer service will try to find the best and cheapest solutions for you. We value your time and we will try to deliver the products as soon as possible at a reasonable price to your construction site or house. The UK's leading insulation supplier near you and your needs. Price List available upon request.
K-REND TC 15 Silicone Thin Coat 1.5mm grain - K Render-Golden
K-Rend TC15 Silicone Render Thin-Coat 1.5mm ǀ Golden
£ 83.70