Largely manufactured from recycled glass (e.g. windscreens) and mineral base materials such as sand and without the use of binding agents. The ingredients are melted into molten glass, which is cooled and crushed into a fine powder. The powdered glass is poured into molds and heated (below the melting point) in a "sintering" process that causes the particles to adhere to one another. Next, a small amount of finely ground carbon-black is added and the material is heated in a "cellulation" process. Here, the carbon reacts with oxygen, creating carbon dioxide, which creates the insulating bubbles in the (material). CO2 accounts for more than 99% of the gas in the cellular spaces.
Cellulose insulation is a material made from recycled newspaper. The paper is shredded and inorganic salts, such as boric acid, are added for resistance to fire, mould, insects and vermin. The insulation is installed either blown or damp-sprayed depending on application.
Wood fibre
The success of wood fibre insulation derives from an attractive environmental profile combined with a whole bag of functions including rigid insulation, sheathing and sarking for timber frames, roofs and flooring as well as flexible insulation for studs and rafters.
Wood of course is renewable, it sequesters carbon during its growth and product production is relatively free from pollution. The insulation value of wood fibre boards is not as dimensionally efficient as some of the orthodox petro-chemical materials - but it's no slouch either - typically coming in with a 'k value' range of between 0.038-0.043 W/mK depending on format.
Hemp
Hemp fibres are produced from hemp straw of the hemp plant. Most hemp is imported, but an increasing amount of home-grown crop is becoming available. Hemp grows up to a height of nearly 4 metres within a period of 100-120 days. Because the plants shade the soil, no chemical protection or toxic additives are required for hemp cultivation. The product is composed of, usually, 85% hemp fibre with the ballance made up of polyester binding and 3-5% soda added for fire proofing.
Straw
Straw is an agricultural by-product, the dry stalks of cereal plants, after the grain and chaff have been removed. Straw makes up about half of the yield of cereal crops such asbarley, oats, rice, rye and wheat.
Ceresit CT174 Silicate-Silicone is a 1.5mm grain render which combines strengths of silicate and silicone plasters that can be used for making thin-layer plasters in external wall insulation systems, on concrete substrates, traditional plasters, gypsum substrates, chipboards and gypsum cardboards.
..
BBA Certificate No. 14/5142
Assumed consumption: from 2.1 to 2.5 kg/m2
Approximate coverage per one bucket - 10m2
Temperature of application: from +5 °C to +25 °C
Resistance to rain: from 24 to 48 hours depending on the temperature
Ceresit CT48 Silicone Paint is a highly breathable, extremely durable, waterproof and resistant to environmental pollutants silicone self clean paint designed for buildings in busy areas or humid environments.
Ceresit CT48 is used for protecting facades, concrete constructions, indoor and outdoo..
BBA Certificate No. 14/5142
Assumed consumption: average approx. 0.3 l/m2 with two coatings
Ceresit CT49 Nano-Silicone Silix is a highly hydrophobic, vapour permeable premium paint for indoor and outdoor applications.
This paint is highly resistant to UV and weather conditions.
Ceresit Nano-Silicone paint extends the aesthetic effect and durability of coated surface.
CT49 Paint i..
BBA Certificate No. 14/5142
Assumed consumption: average approx. 0.3 l/m2 with two coatings
Ceresit Silicone Top-coat CT74 is a premium silicone resins based 1.5mm grain render designed to make thin coat decorative plaster on facades and concrete substrates, available in a full range of colors.
Silicone resins used in the plaster guarantee high durability and long-term protection again..
BBA Certificate No. 14/5142
Assumed consumption: from 2.1 to 2.5 kg/m2
Approximate coverage per one bucket - 10m2
Temperature of application: from +5 °C to +25 °C
Resistance to rain: from 24 to 48 hours depending on the temperature
Coloured Thin-Coat Render Sample is a pot that contains 600g worth of EWI-Pro silicone thin coat render (1.5mm grain size) residue pre-mixed in your selected colour.
Render Sample pots are intended to allow you to test the render colour on a small area of the property.
The render needs to dry ..
CT1 Silicone Sealant and Adhesive WHITE 290ml is a flexible hybrid polymer based silicone sealant and adhesive that can be used to seal: solid wall insulation, render-only systems, baths, showers, roofs, doors, windows, and gutters.
This silicone sealant & adhesive is an easy to apply product wit..
Everbuild General Purpose Silicone 290ml (White Colour) is a multi-purpose, long-lasting silicone sealant with anti-fungal properties that can be used in areas of high humidity and damp to create a completely waterproof seal.
GP Silicone is a fast curing time product designed to create a high-str..
Everbuild General Purpose Silicone 290ml - White
Multi-purpose, long-lasting silicone sealant
Can be used in areas of high humidity and damp
Designed to create a high-strength waterproof seal
Everbuild Stixall Extreme Power Silicone Adhesive and Sealant WHITE (290ml) is a combined high-grab building adhesive and sealant offering a high strength adhesion and gap-filling capabilities that can be applied to a wide range of substrates.
Stixall is a one part, chemically curing sealant and ..
Everbuild Stixall Silicone Adhesive & Sealant WHITE
High-grab building adhesive and sealant 290ml
High strength adhesion and gap-filling capabilities
Waterproof and resistant to extreme temperatures
Suitable for interior and exterior use - Quick curing
EWI-005 Silicone Paint 15litres is a ready-to-use masonry silicone paint used for painting over an existing render in order to refresh the façade and create an external wall finish that looks brand new, or to seal the mineral render.
Silicone paint is an easy to apply high-performance paint speci..
EWI-006 Silicone Paint Premium Bio is a masonry silicone paint used as a high performance, breathable finishing topcoat in the EWI Pro heritage system, as its breathability works well in conjunction with the breathable lime render.
EWI Pro Premium Bio Silicone Paint will actively resist organic g..
EWI-006 Silicone Paint Premium Bio 15l
High performance Masonry silicone paint
Application by brushes, rollers or spray equipment
Actively resist organic growth and dirt
Breathable finishing topcoat in the EWI Pro heritage system
EWI-007 Nano Drex Silicone Paint 15l is a highly hydrophobic external masonry silicone-based paint that contains nano-silicone particles which offers advanced self-cleaning capabilities and enhanced water repellency to any water that encounters the substrate.
Nano Drex Silicone Paint is the most ..
EWI-040 Silicone Silicate Elastic Render 1.5mm grain (25kg bucket) is an elastic through-coloured, polymer-modified, decorative silicone silicate ready-mix render often used in External Wall Insulation (EWI) systems, or as a standalone thin-coat top-coat render.
Silicate-Silicone Render is one of..
EWI-075 Silicone Render EWI Pro 0.5mm grain 25kg is a self-cleaning long-lasting silicone thin-coat render used as a protective decorative finish to an External Wall Insulation (EWI) system that can be applied by hand using a trowel.
EWI Pro EWI-075 Silicone Render is a polymer-modified flexible ..
EWI Pro EWI-076 Premium Bio Silicone Render 1mm grain 25kg is a robust silicone-based, polymer-modified, thin coat render, Premium Bio is highly breathable and vapour permeable, an ideal solution for Mineral Wool External Wall Insulation (EWI) systems.
EWI-076 Bio Silicone Render is one of the mo..
EWI-076 BIO Silicone Render - 1mm grain
Premium long-lasting silicone thin-coat render
External Wall Insulation (EWI) systems
Elastic and durable self-cleaning Silicone Render
Resistant to fading, aesthetically-pleasing Render
EWI-077 Nano Drex Silicone Render 1.5mm grain 25kg is a most advanced thin-coat Silicone Render that offers unmatched performance in terms of flexibility, breathability and self-cleaning properties to an External Wall Insulation (EWI) system.
Silicone Render EWI-077 is a highly hydrophobic, thin ..
EWI-333 Top Coat Primer 20kg is a priming paint designed to be used in conjunction with any of silicone based renders to help strengthen the substrate and limit absorptive capacity of the base coat layer without compromising its breathability.
Most popular EWI-333 Top Coat Primer (Priming Paint) ..
EWI-Pro Render Colour Sample Chart is a complete set of EWI Pro Thin Coat Renders colour ranges which cater to everyone’s tastes.
Choosing a coloured render for your property is a big decision, that’s why EWI-Pro colour chart is designed to be able to help you to make this decision with ease, avo..
Antique White Primer TC15 is a low odour, ready to use primer which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base Coat..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Arran K-Rend Silicone K1 Monocouche Scratch Render is a breathable polymer modified silicone-cement based self-coloured render designed for most spray machines and hand application within External Wall Insulation systems.
Monocouche Silicone K1 is specifically designed to incorporate the benefits..
Antique White K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attract..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
Render Colour Sample Sleeve is a sleeve of EWI-Pro silicone thin coat render colour sample that comes in grain sizes of 1.5mm and allows you to get a feel for how silicone renders will look on your walls.
Using EWI-Pro Render Colour Samples you can make a better informed decision about which colo..
CT1 Silicone Sealant and Adhesive GREY (290ml cartridge) is a special hybrid polymer based silicone sealant and adhesive that can be used to seal: solid wall insulation, render-only systems, baths, showers, roofs, doors, windows, and gutters.
Grey colour silicone sealant & adhesive is an easy to ..
Everbuild Multi-purpose Silicone 290ml (Clear – Transparent) is a quick curing, flexible long-lasting silicone sealant with anti-fungal properties that can be used in areas of high humidity and damp to create a completely waterproof permanent seal.
General Purpose Silicone EVERBUILD® is a fast cu..
Everbuild General Purpose Silicone 290ml - Clear
Multi-purpose silicone sealant - Transparent
Can be used in areas of high humidity and damp
Designed to create a high-strength waterproof seal
EWI Pro EWI-005 Silicone Paint 5l bucket is a versatile masonry silicone paint used for painting over an existing render in order to refresh the façade and create an external wall finish that looks brand new, or to seal the mineral render.
Silicone paint is a high-performance paint specifically d..
EWI-075 Silicone Render EWI Pro 1.0mm grain 25kg is a long-lasting ready-to-use silicone thin-coat render used as a protective decorative finish to an External Wall Insulation (EWI) system that can be applied by hand straight out of the bucket.
EWI Pro EWI-075 Silicone Render is a polymer-modifie..
EWI-076 Silicone Render Premium Bio Protect Formula 1.5mm grain is a long-lasting silicone-based, polymer-modified, thin-coat render, Premium Bio is highly breathable and vapour permeable, an ideal solution for Mineral Wool External Wall Insulation (EWI) systems.
Premium Bio Silicone Render is an..
1.5mm grain EWI-076 BIO Silicone Render
Premium long-lasting silicone thin-coat render
External Wall Insulation (EWI) systems
Elastic and durable self-cleaning Silicone Render
Resistant to fading, aesthetically-pleasing Render
EWI-333 Top Coat Primer 7kg Priming Paint is a water-based primer designed to be used in conjunction with any of silicone based renders to help strengthen the substrate and limit absorptive capacity of the base coat layer without compromising its breathability.
EWI Pro EWI-333 Top Coat Primer (Pr..
Ash White Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base C..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Buttermilk K-Rend Silicone K1 Monocouche Scratch Render is a breathable polymer modified silicone-cement based self-coloured render designed for most spray machines and hand application within External Wall Insulation systems.
Monocouche Silicone K1 is specifically designed to incorporate the ben..
Ash White K Rend Silicone TC is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attractive, lo..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
Stixall Extreme Power Silicone Adhesive and Sealant – Crystal Clear (Transparent) is a high-grab building adhesive and sealant offering a high strength adhesion and gap-filling capabilities that can be applied to a wide range of substrates.
Everbuild Stixall is a one part, chemically curing seala..
Everbuild Stixall Extreme Power CRYSTAL CLEAR
High-grab building adhesive and sealant 290ml
High strength adhesion and gap-filling capabilities
Waterproof and resistant to extreme temperatures
Suitable for interior and exterior use (Transparent)
CT1 Silicone Sealant & Adhesive CLEAR (Transparent) 290ml is a highly flexible hybrid polymer based silicone sealant and adhesive that can be used to seal: solid wall insulation, render-only systems, baths, showers, roofs, doors, windows, and gutters.
Clear (transparent) colour silicone sealant a..
CT1 Silicone Sealant and Adhesive - Clear (Transparent)
Stixall Extreme Power Silicone Sealant – Colour Black (290ml) is an ultimate combined high-grab building adhesive and sealant offering a high strength adhesion and gap-filling capabilities that can be applied to a wide range of substrates.
Everbuild Stixall is a one part, chemically curing sealan..
Everbuild Stixall Extreme Power BLACK
High-grab building adhesive and sealant 290ml
High strength adhesion and gap-filling capabilities
EWI-075 Silicone Render 1.5mm grain 25kg is the most popular EWI Pro decorative silicone thin-coat render used as a protective finish to an External Wall Insulation (EWI) system that can be applied by hand using a trowel straight out of the bucket.
EWI Pro EWI-075 Silicone Render is a polymer-mod..
Biscuit Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base Coa..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Champagne K-Rend Silicone K1 Monocouche Scratch Render is a breathable polymer modified silicone-cement based self-coloured render designed for most spray machines and hand application within External Wall Insulation systems.
Monocouche Silicone K1 is specifically designed to incorporate the bene..
Biscuit K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attractive, l..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
CT1 Silicone Adhesive and Sealant (Colour Black) 290ml is a multi-purpose silicone based sealant and adhesive that can be used to seal: solid wall insulation, render-only systems, baths, showers, roofs, doors, windows, and gutters.
Black colour silicone sealant and adhesive is an easy to apply pr..
EWI-075 EWI Pro Silicone Render 2mm grain 25kg is a decorative silicone thin-coat render used as a protective finish to an External Wall Insulation (EWI) system that can be applied by hand using a trowel straight out of the bucket.
Silicone Render EWI Pro EWI-075 is a polymer-modified flexible an..
Causeway Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base Co..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Cinnamon K-Rend Silicone K1 Monocouche Scratch Render is a breathable polymer modified silicone-cement based self-coloured render designed for most spray machines and hand application within External Wall Insulation systems.
Monocouche Silicone K1 is specifically designed to incorporate the benef..
Causeway K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attractive, ..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
EWI-075 Silicone Render 3mm grain is a weatherproof and frost-proof silicone thin-coat render used as a protective and decorative finish to an External Wall Insulation (EWI) system that can be applied by hand using a trowel straight out of the bucket.
Silicone Render EWI Pro EWI-075 25kg is a pol..
Corn Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base Coat (..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Cream K-Rend Silicone K1 Monocouche Scratch Render is a breathable polymer modified silicone-cement based self-coloured render designed for most spray machines and hand application within External Wall Insulation systems.
Monocouche Silicone K1 is specifically designed to incorporate the benefits..
Corn K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attractive, low ..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
Silicone Adhesive and Sealant (Anthracite) CT1 – 290ml cartridge is a ready-to-use silicone based sealant and adhesive that can be used to seal: solid wall insulation, render-only systems, baths, showers, roofs, doors, windows, and gutters.
Anthracite colour silicone sealant and adhesive is an ea..
Golden Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base Coat..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Fintry Stone K-Rend Silicone K1 Monocouche Scratch Render is a breathable polymer modified silicone-cement based self-coloured render designed for most spray machines and hand application within External Wall Insulation systems.
Monocouche Silicone K1 is specifically designed to incorporate the b..
Golden K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attractive, lo..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
Granite Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base Coa..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Green K-Rend Silicone K1 Monocouche Scratch Render is a breathable polymer modified silicone-cement based self-coloured render designed for most spray machines and hand application within External Wall Insulation systems.
Monocouche Silicone K1 is specifically designed to incorporate the benefits..
Granite K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attractive, l..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
Light Bronze Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Bas..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Grey K-Rend Silicone K1 Monocouche Scratch Render is a breathable polymer modified silicone-cement based self-coloured render designed for most spray machines and hand application within External Wall Insulation systems.
Monocouche Silicone K1 is specifically designed to incorporate the benefits ..
Light Bronze K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attracti..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
Limestone White Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of ..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Ivory K-Rend Silicone K1 Monocouche Scratch Render is a breathable polymer modified silicone-cement based self-coloured render designed for most spray machines and hand application within External Wall Insulation systems.
Monocouche Silicone K1 is specifically designed to incorporate the benefits..
Limestone White K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attra..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
Linen Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base Coat ..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Oatmeal K-Rend Silicone K1 Monocouche Scratch Render is a breathable polymer modified silicone-cement based self-coloured render designed for most spray machines and hand application within External Wall Insulation systems.
Monocouche Silicone K1 is specifically designed to incorporate the benefi..
Linen K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attractive, low..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
Mink Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base Coat (..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Pewter K-Rend Silicone K1 Monocouche Scratch Render is a breathable polymer modified silicone-cement based self-coloured render designed for most spray machines and hand application within External Wall Insulation systems.
Monocouche Silicone K1 is specifically designed to incorporate the benefit..
Mink K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attractive, low ..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
Mint Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base Coat (..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Polar White K-Rend Silicone K1 Monocouche Scratch Render is a breathable polymer modified silicone-cement based self-coloured render designed for most spray machines and hand application within External Wall Insulation systems.
Monocouche Silicone K1 is specifically designed to incorporate the be..
Mint K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attractive, low ..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
Mocha Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base Coat ..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Powder Blue K-Rend Silicone K1 Monocouche Scratch Render is a breathable polymer modified silicone-cement based self-coloured render designed for most spray machines and hand application within External Wall Insulation systems.
Monocouche Silicone K1 is specifically designed to incorporate the be..
Mocha K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attractive, low..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
Pearl Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base Coat ..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Salmon Pink K-Rend Silicone K1 Monocouche Scratch Render is a breathable polymer modified silicone-cement based self-coloured render designed for most spray machines and hand application within External Wall Insulation systems.
Monocouche Silicone K1 is specifically designed to incorporate the be..
Pearl K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attractive, low..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
Pistachio Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base C..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Sandstone K-Rend Silicone K1 Monocouche Scratch Render is a breathable polymer modified silicone-cement based self-coloured render designed for most spray machines and hand application within External Wall Insulation systems.
Monocouche Silicone K1 is specifically designed to incorporate the bene..
Pistachio K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attractive,..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
Pure White Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base ..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Sterling White K-Rend Silicone K1 Monocouche Scratch Render is a breathable polymer modified silicone-cement based self-coloured render designed for most spray machines and hand application within External Wall Insulation systems.
Monocouche Silicone K1 is specifically designed to incorporate the..
Pure White K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attractive..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
Rosemary Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base Co..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Stone K-Rend Silicone K1 Monocouche Scratch Render is a breathable polymer modified silicone-cement based self-coloured render designed for most spray machines and hand application within External Wall Insulation systems.
Monocouche Silicone K1 is specifically designed to incorporate the benefits..
Rosemary K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attractive, ..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
Sky Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base Coat (H..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Terracota K-Rend Silicone K1 Monocouche Scratch Render is a breathable polymer modified silicone-cement based self-coloured render designed for most spray machines and hand application within External Wall Insulation systems.
Monocouche Silicone K1 is specifically designed to incorporate the bene..
Sky K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attractive, low m..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
Sunflower Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base C..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
White K-Rend Silicone K1 Monocouche Scratch Render is a breathable polymer modified silicone-cement based self-coloured render designed for most spray machines and hand application within External Wall Insulation systems.
Monocouche Silicone K1 is specifically designed to incorporate the benefits..
Sunflower K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attractive,..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
Wheaten Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base Coa..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
York K-Rend Silicone K1 Monocouche Scratch Render is a breathable polymer modified silicone-cement based self-coloured render designed for most spray machines and hand application within External Wall Insulation systems.
Monocouche Silicone K1 is specifically designed to incorporate the benefits ..
Wheaten K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attractive, l..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind