Stixall Extreme Power Silicone Sealant – Colour Black (290ml) is an ultimate combined high-grab building adhesive and sealant offering a high strength adhesion and gap-filling capabilities that can be applied to a wide range of substrates.

Everbuild Stixall is a one part, chemically curing sealant and adhesive combining the best qualities of silicone and polyurethane technologies specifically designed for adhering most common building surfaces to each other and themselves.

Silicone Adhesive and Sealant Everbuild Stixall is entirely waterproof, weatherproof and resistant to extreme temperatures suitable for interior and exterior use and has a fast curing time for speedy job completion.

Everbuild Stixall provides the most extreme power to both bond and seal virtually everything to anything in virtually all conditions including damp substrates and underwater applications, even in the rain!

Stixall Extreme Power is the ultimate building adhesive and sealant, based on hybrid polymer technology.

Everbuild Stixall Silicone Sealant is available in 3 colours: white, black and clear (transparent). is available in 3 colours: white, black and clear (transparent).

Specification:

Colour: Black

Cartridge Size: 290ml

Material Density: 1.02 kg/l

Shelf Life: 12 Months unopened

pH Value: 7.2 / 7.8 Mildly alkaline

Temperature Resistance: -40 to +70°C

Storage: +5⁰C to +25⁰C without direct sunlight

Application Temperature: -40⁰C to +70⁰C (Recommended +5⁰C)

Curing Time: 2mm per 24 hours in depth

Skin Time: 15-30 mins

Stixall Extreme Power Silicone Sealant Key Points:

 · Quick curing time for speedy job completion.

 · Incredible initial grab, no slip and gap filling properties.

 · High bonding strength for interior and exterior use.

 · Certified to the harmonized European standard for Sealants for façade and sanitary use.

 · Can be applied to Wet Surfaces - Waterproof and Weatherproof.

 · Overpaintable with some paints - always test a small area first.

 · Resistant to temperature extremes -40°C to +70°C.

 · Resistant to Chemicals & Petrol (10% dilute acids/alkalis, most solvents).

 · Resistant to slump: <3mm (ISO7390).

 · Excellent primer less adhesion to most surfaces, including metals, most plastics, glass, concrete, plaster, plasterboard, polyester.

Everbuild Stixall Silicone Sealant and Adhesive Application:

 · All substrates must be clean and dust-free.

 · Everbuild Stixall Silicone Sealant can be used on damp surfaces without standing water.

 · Can be used for underwater applications in the case of an emergency repair.

 · Carefully cut the tip of the silicone sealant cartridge.

 · Fix the nozzle and cut the aperture to the required width.

 · Apply with a standard sealant gun.

 · If using Stixall as a sealant - masking tape should be used to ensure that adjacent walls do not get contaminated with the product.

 · The masking tape should be removed immediately before the sealant sets.

 · The sealant should be tooled within 5 minutes of application to ensure a smooth, professional finish.

 · When using the silicone sealant as an adhesive for bonding lightweight items, apply the adhesive to the back of the item in one or two continuous beads and press them into place.

 · Ensure that the Everbuild Stixall Silicone Sealant is fully cured before being painted over.

 · If the adhesive is still wet, you can remove it with white spirit and a cloth.

 · Fully cured material can be carefully removed by mechanical means.

*Further information may be found in our Downloads section.

Fairly easy access to all PDF files.

Datasheet ǀ Declaration of Performance - DoP ǀ BBA Certificate ǀ Installation Guide ǀ Certificates ǀ Brochure ǀ SPEC Sheet ǀ SDS