EWI-076 Silicone Render Premium Bio Protect Formula 1.5mm grain is a long-lasting silicone-based, polymer-modified, thin-coat render, Premium Bio is highly breathable and vapour permeable, an ideal solution for Mineral Wool External Wall Insulation (EWI) systems.

Premium Bio Silicone Render is an elastic and durable silicone render with advanced self-cleaning agents which actively break down organic growth on the surface of the render allowing moisture to escape from the substrate and minimising the

risk of cracking.

Bio Silicone Render is one of the most progressive renders within EWI Pro's range boasting outstanding properties that ensure its high performance.

EWI-076 is a highly resistant to algae and plant growth product for buildings in areas that are highly exposed to organic matter, as its advanced self-cleaning capabilities make it suitable for withstanding this type of environment.

Most popular EWI-076 Bio Silicone Render 1.5mm grain colours are: Pure White, Linen, Orchid, Ivory, Mist, Porcelain, Copenhagen, Antique White, Eggshell, Platinum, Elderflower, Fog, Ice, Clay, Haze, Frost, Cloud, Silver, Bone, Sandstone, Parrifin, Magnolia, Prosecco, Opal, Almond, Silk, Sage, Mirror, Concrete, Storm, Diamond, Smoke, Truffle, Ash, Lead and Acorn.

Disclaimer: Render colours may appear differently on-screen compared to real life – we always recommend that you order a colour sample before making a final decision.

EWI-076 Premium Bio Silicone Render is available in thousands of different colours (e.g. RAL or NCS colours).

If the colour you are looking for is not displayed above, please request a quote or call us on 02081910776.

Please note: We do not accept returns on tinted products because our tinted renders are made-to-order.

Colours from different batches may vary slightly - to avoid an uneven finish, mix tubs before application.

Specification:

Nominal thickness: 1.5mm-3mm 

EWI-075 Silicone Render: approx. coverage 9.5m2

Application: by hand

Consistency: ready-to-use product

Weight: 25kg

EWI Pro EWI-076 Premium Bio Silicone Render Application:

 · Apply the render using a stainless-steel trowel to the substrate surface.

 · The optimal thickness of the render is equal to the grain size and is achieved by removing any excess product from the substrate.

 · To ensure an even textured finish, immediately rub up the surface of the render using circular motions with a plastic render float.

 · All pigments are added using a highly calibrated mixing machine, however minor discrepancies may occur between batches.

 · As a result, for each elevation / insulated render system, we recommend using a large primary container which can hold multiple buckets of coloured render.

 · This should be continually topped up and remixed using a paddle mix throughout render application.

 · Works must be protected from rain, snow, strong winds and direct sunlight.

 · The average drying time for 1.5mm grain Premium Bio Silicone EWI-076 Render is 12-48 hours depending on weather conditions.

 · The drying period may be significantly longer in low temperatures and high relative humidity.

Substrate Preparation for Premium Bio Silicone EWI-076 Render:

 · Before applying the render, the basecoat layer needs to be primed using EWI-333 Top Coat Primer.

 · This can be applied to the substrate using a brush, a roller or a spray machine.

EWI-076 Certification and Standards:

 · PN-C-81913:1998 Dispersion paints for façade painting.

 · European Technical Approvals ETA – 15/0576 and ETA – 15/0575.

 · BBA Approval Inspection Testing Certificate 18/5503.

*Further information may be found in our Downloads section.

Fairly easy access to all PDF files.

Datasheet ǀ Declaration of Performance - DoP ǀ BBA Certificate ǀ Installation Guide ǀ Certificates ǀ Brochure ǀ SPEC Sheet