Largely manufactured from recycled glass (e.g. windscreens) and mineral base materials such as sand and without the use of binding agents. The ingredients are melted into molten glass, which is cooled and crushed into a fine powder. The powdered glass is poured into molds and heated (below the melting point) in a "sintering" process that causes the particles to adhere to one another. Next, a small amount of finely ground carbon-black is added and the material is heated in a "cellulation" process. Here, the carbon reacts with oxygen, creating carbon dioxide, which creates the insulating bubbles in the (material). CO2 accounts for more than 99% of the gas in the cellular spaces.
Cellulose insulation is a material made from recycled newspaper. The paper is shredded and inorganic salts, such as boric acid, are added for resistance to fire, mould, insects and vermin. The insulation is installed either blown or damp-sprayed depending on application.
Wood fibre
The success of wood fibre insulation derives from an attractive environmental profile combined with a whole bag of functions including rigid insulation, sheathing and sarking for timber frames, roofs and flooring as well as flexible insulation for studs and rafters.
Wood of course is renewable, it sequesters carbon during its growth and product production is relatively free from pollution. The insulation value of wood fibre boards is not as dimensionally efficient as some of the orthodox petro-chemical materials - but it's no slouch either - typically coming in with a 'k value' range of between 0.038-0.043 W/mK depending on format.
Hemp
Hemp fibres are produced from hemp straw of the hemp plant. Most hemp is imported, but an increasing amount of home-grown crop is becoming available. Hemp grows up to a height of nearly 4 metres within a period of 100-120 days. Because the plants shade the soil, no chemical protection or toxic additives are required for hemp cultivation. The product is composed of, usually, 85% hemp fibre with the ballance made up of polyester binding and 3-5% soda added for fire proofing.
Straw
Straw is an agricultural by-product, the dry stalks of cereal plants, after the grain and chaff have been removed. Straw makes up about half of the yield of cereal crops such asbarley, oats, rice, rye and wheat.
10mm Grey EPS for External Wall Insulation (Graphite Expanded Polystyrene) is an insulating material with about 20-25% better thermal insulation properties than basic white EPS that can effectively reduce heating costs and improve the appearance of the building.
Complete external wall insulation ..
External Wall Insulation Systems
Lightweight - Cost efficient - Durable
High Resistance to Mold Growth
Thermal Conductivity: 0.031W/mK
Easily cut with a sharp knife to any size and shape
20mm White EPS External Wall Insulation Board (EPS70) is an easy to handle and install Expanded Polystyrene Insulation material used as a main component of external wall insulation systems and thin coat rendering.
White EPS (Polystyrene) 20mm is a lightweight basic insulation material available a..
External Wall Insulation Systems - EWI
Easily cut with a sharp knife to any size and shape
Ceresit CT16 is a high-quality Priming Paint designed to add powerful adhesion between insulated render system layers.
Thanks to its rough structure CT16 primer strengthening the whole system and prevent stains formation on the final thin coat render.
CT16 paint can be applied to the surfaces..
BBA Certificate No. 14/5142
Assumed consumption: from 0.2 to 0.35 l/m2 / from 0.3 to 0.5 kg/m2 depending on the smoothness and absorption of the substrate
Approximate coverage per one bucket - 35m2 (15kg)
Temperature of application: from +5 °C to +25 °C
Easier application of plasters - Higher adhesion to the substrate - Ready to use
Ceresit CT17 PRIMER is a high-performance deep penetrating, fast drying priming paint designed for walls or ceilings inside and outside buildings prior to fixing insulation boards, ceramic tiles, papering or painting.
Application of Ceresit CT17 Profi is highly recommended for gypsum, anhydrite,..
Ceresit CT174 Silicate-Silicone is a 1.5mm grain render which combines strengths of silicate and silicone plasters that can be used for making thin-layer plasters in external wall insulation systems, on concrete substrates, traditional plasters, gypsum substrates, chipboards and gypsum cardboards.
..
BBA Certificate No. 14/5142
Assumed consumption: from 2.1 to 2.5 kg/m2
Approximate coverage per one bucket - 10m2
Temperature of application: from +5 °C to +25 °C
Resistance to rain: from 24 to 48 hours depending on the temperature
Ceresit CT42 is a waterproof, highly breathable, fast-drying Acrylic Masonry Paint used for protecting external walls and concrete constructions.
This functional paint can be used indoor and outdoor on concrete, cement plasters, lime-cement and mineral substrates.
Very efficient paint, one buc..
BBA Certificate No. 14/5142
Assumed consumption: average approx. 0.3 l/m2 with two coatings
Ceresit CT48 Silicone Paint is a highly breathable, extremely durable, waterproof and resistant to environmental pollutants silicone self clean paint designed for buildings in busy areas or humid environments.
Ceresit CT48 is used for protecting facades, concrete constructions, indoor and outdoo..
BBA Certificate No. 14/5142
Assumed consumption: average approx. 0.3 l/m2 with two coatings
Ceresit CT49 Nano-Silicone Silix is a highly hydrophobic, vapour permeable premium paint for indoor and outdoor applications.
This paint is highly resistant to UV and weather conditions.
Ceresit Nano-Silicone paint extends the aesthetic effect and durability of coated surface.
CT49 Paint i..
BBA Certificate No. 14/5142
Assumed consumption: average approx. 0.3 l/m2 with two coatings
Ceresit CT60 is a 1.5mm grain stone texture thin coat acrylic façade plaster suitable for indoor and outdoor applications is used for making thin-layer plasters on external wall insulation systems, concrete substrates, traditional plasters, gypsum substrates and chipboards.
Often chosen by Custom..
BBA Certificate No. 14/5142
Assumed consumption: from 2.1 to 2.5 kg/m2
Approximate coverage per one bucket - 10m2
Temperature of application: from +5 °C to +25 °C
Resistance to rain: from 24 to 48 hours depending on the temperature
Ceresit Silicone Top-coat CT74 is a premium silicone resins based 1.5mm grain render designed to make thin coat decorative plaster on facades and concrete substrates, available in a full range of colors.
Silicone resins used in the plaster guarantee high durability and long-term protection again..
BBA Certificate No. 14/5142
Assumed consumption: from 2.1 to 2.5 kg/m2
Approximate coverage per one bucket - 10m2
Temperature of application: from +5 °C to +25 °C
Resistance to rain: from 24 to 48 hours depending on the temperature
Ceresit ZU Adhesive and Reinforcing Mortar (25kg Base Coat Render) is a two-in-one product designed to secure polystyrene boards and fiberglass mesh within a complex system of external walls insulation.
ZU is flexible and durable powder, used for fixing expanded polystyrene (EPS) boards and for ..
EWI-090 Monocouche Scratch Render 25kg is a decorative through-coloured scratch render with enhanced adhesive properties, ensuring a flexible and crack-resistant natural stone-like finish for concrete, clay, block, and brick substrates.
Scratch Render (Monocouche) is available in six most popular..
K-Rend HP12 Base Coat is a cost effective enhanced performance high polymer base-coat reinforcing render designed for difficult substrates within External Wall Insulation systems.
It's ideal solution as a stipple coat or for dense backgrounds and has increased water resistance with great flexibil..
Antique White Primer TC15 is a low odour, ready to use primer which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base Coat..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Arran K-Rend Silicone K1 Monocouche Scratch Render is a breathable polymer modified silicone-cement based self-coloured render designed for most spray machines and hand application within External Wall Insulation systems.
Monocouche Silicone K1 is specifically designed to incorporate the benefits..
Antique White K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attract..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
12.5mm Knauf AQUAPANEL® Cement Board Outdoor is an exterior application class A1 non-combustible, BBA certified external render carrier board providing a solid base that withstands extreme weather conditions.
Aquapanel Exterior Board 12.5mm x 900mm x 2400mm is a robust building panel made of aggr..
12.5mm Knauf AQUAPANEL® Cement Board
Class A1 Non-combustible, BBA Certified Panel
External Render Carrier Board Fast to Install
Exterior Walls in Ventilated Systems, Ceilings & Soffits
Monocouche Scratch Render Colour Samples EWI-090 Sleeve is a perfect solution for comparing 6 monocouche scratch render colours, helping you decide the perfect colour for your property exterior walls.
EWI Pro monocouche scratch render sample sleeve consists of 6 monocouche colours: Bright white, ..
20mm Grey EPS for External Wall Insulation (Graphite Expanded Polystyrene) is an insulating material with about 20-25% better thermal insulation properties than basic white EPS that can effectively reduce heating costs and improve the appearance of the building.
Complete external wall insulation ..
External Wall Insulation Systems
Lightweight - Cost efficient - Durable
High Resistance to Mold Growth
Thermal Conductivity: 0.031W/mK
Easily cut with a sharp knife to any size and shape
30mm White EPS External Wall Insulation Board (EPS70) is an easy to handle and install Expanded Polystyrene Insulation material used as a main component of external wall insulation systems and thin coat rendering.
White EPS (Polystyrene) 30mm is a lightweight basic insulation material available a..
External Wall Insulation Systems - EWI
Easily cut with a sharp knife to any size and shape
Ash White Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base C..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Buttermilk K-Rend Silicone K1 Monocouche Scratch Render is a breathable polymer modified silicone-cement based self-coloured render designed for most spray machines and hand application within External Wall Insulation systems.
Monocouche Silicone K1 is specifically designed to incorporate the ben..
Ash White K Rend Silicone TC is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attractive, lo..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
30mm Grey EPS for External Wall Insulation (Graphite Expanded Polystyrene) is an insulating material with about 20-25% better thermal insulation properties than basic white EPS that can effectively reduce heating costs and improve the appearance of the building.
Complete external wall insulation ..
External Wall Insulation Systems
Lightweight - Cost efficient - Durable
High Resistance to Mold Growth
Thermal Conductivity: 0.031W/mK
Easily cut with a sharp knife to any size and shape
50mm White EPS External Wall Insulation Board (EPS70) is an easy to handle and install Expanded Polystyrene Insulation material used as a main component of external wall insulation systems and thin coat rendering.
White EPS (Polystyrene) 50mm is a lightweight basic insulation material available a..
External Wall Insulation Systems - EWI
Easily cut with a sharp knife to any size and shape
Biscuit Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base Coa..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Champagne K-Rend Silicone K1 Monocouche Scratch Render is a breathable polymer modified silicone-cement based self-coloured render designed for most spray machines and hand application within External Wall Insulation systems.
Monocouche Silicone K1 is specifically designed to incorporate the bene..
Biscuit K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attractive, l..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
50mm Grey EPS for External Wall Insulation (Graphite Expanded Polystyrene) is an insulating material with about 20-25% better thermal insulation properties than basic white EPS that can effectively reduce heating costs and improve the appearance of the building.
Complete external wall insulation ..
External Wall Insulation Systems
Lightweight - Cost efficient - Durable
High Resistance to Mold Growth
Thermal Conductivity: 0.031W/mK
Easily cut with a sharp knife to any size and shape
80mm White EPS External Wall Insulation Board (EPS70) is an easy to handle and install Expanded Polystyrene Insulation material used as a main component of external wall insulation systems and thin coat rendering.
White EPS (Polystyrene) 80mm is a lightweight basic insulation material available a..
External Wall Insulation Systems - EWI
Easily cut with a sharp knife to any size and shape
Causeway Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base Co..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Cinnamon K-Rend Silicone K1 Monocouche Scratch Render is a breathable polymer modified silicone-cement based self-coloured render designed for most spray machines and hand application within External Wall Insulation systems.
Monocouche Silicone K1 is specifically designed to incorporate the benef..
Causeway K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attractive, ..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
100mm White EPS External Wall Insulation Board (EPS70) is an easy to handle and install Expanded Polystyrene Insulation material used as a main component of external wall insulation systems and thin coat rendering.
White EPS (Polystyrene) 100mm is a lightweight basic insulation material available..
External Wall Insulation Systems - EWI
Easily cut with a sharp knife to any size and shape
80mm Grey EPS for External Wall Insulation (Graphite Expanded Polystyrene) is an insulating material with about 20-25% better thermal insulation properties than basic white EPS that can effectively reduce heating costs and improve the appearance of the building.
Complete external wall insulation ..
External Wall Insulation Systems
Lightweight - Cost efficient - Durable
High Resistance to Mold Growth
Thermal Conductivity: 0.031W/mK
Easily cut with a sharp knife to any size and shape
Corn Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base Coat (..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Cream K-Rend Silicone K1 Monocouche Scratch Render is a breathable polymer modified silicone-cement based self-coloured render designed for most spray machines and hand application within External Wall Insulation systems.
Monocouche Silicone K1 is specifically designed to incorporate the benefits..
Corn K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attractive, low ..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
100mm Grey EPS for External Wall Insulation (Graphite Expanded Polystyrene) is an insulating material with about 20-25% better thermal insulation properties than basic white EPS that can effectively reduce heating costs and improve the appearance of the building.
Complete external wall insulation..
External Wall Insulation Systems
Lightweight - Cost efficient - Durable
High Resistance to Mold Growth
Thermal Conductivity: 0.031W/mK
Easily cut with a sharp knife to any size and shape
Golden Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base Coat..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Fintry Stone K-Rend Silicone K1 Monocouche Scratch Render is a breathable polymer modified silicone-cement based self-coloured render designed for most spray machines and hand application within External Wall Insulation systems.
Monocouche Silicone K1 is specifically designed to incorporate the b..
Golden K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attractive, lo..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
Granite Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base Coa..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Green K-Rend Silicone K1 Monocouche Scratch Render is a breathable polymer modified silicone-cement based self-coloured render designed for most spray machines and hand application within External Wall Insulation systems.
Monocouche Silicone K1 is specifically designed to incorporate the benefits..
Granite K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attractive, l..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
Light Bronze Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Bas..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Grey K-Rend Silicone K1 Monocouche Scratch Render is a breathable polymer modified silicone-cement based self-coloured render designed for most spray machines and hand application within External Wall Insulation systems.
Monocouche Silicone K1 is specifically designed to incorporate the benefits ..
Light Bronze K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attracti..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
Limestone White Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of ..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Ivory K-Rend Silicone K1 Monocouche Scratch Render is a breathable polymer modified silicone-cement based self-coloured render designed for most spray machines and hand application within External Wall Insulation systems.
Monocouche Silicone K1 is specifically designed to incorporate the benefits..
Limestone White K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attra..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
Linen Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base Coat ..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Oatmeal K-Rend Silicone K1 Monocouche Scratch Render is a breathable polymer modified silicone-cement based self-coloured render designed for most spray machines and hand application within External Wall Insulation systems.
Monocouche Silicone K1 is specifically designed to incorporate the benefi..
Linen K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attractive, low..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
Mink Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base Coat (..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Pewter K-Rend Silicone K1 Monocouche Scratch Render is a breathable polymer modified silicone-cement based self-coloured render designed for most spray machines and hand application within External Wall Insulation systems.
Monocouche Silicone K1 is specifically designed to incorporate the benefit..
Mink K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attractive, low ..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
Mint Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base Coat (..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Polar White K-Rend Silicone K1 Monocouche Scratch Render is a breathable polymer modified silicone-cement based self-coloured render designed for most spray machines and hand application within External Wall Insulation systems.
Monocouche Silicone K1 is specifically designed to incorporate the be..
Mint K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attractive, low ..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
Mocha Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base Coat ..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Powder Blue K-Rend Silicone K1 Monocouche Scratch Render is a breathable polymer modified silicone-cement based self-coloured render designed for most spray machines and hand application within External Wall Insulation systems.
Monocouche Silicone K1 is specifically designed to incorporate the be..
Mocha K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attractive, low..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
Pearl Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base Coat ..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Salmon Pink K-Rend Silicone K1 Monocouche Scratch Render is a breathable polymer modified silicone-cement based self-coloured render designed for most spray machines and hand application within External Wall Insulation systems.
Monocouche Silicone K1 is specifically designed to incorporate the be..
Pearl K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attractive, low..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
Pistachio Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base C..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Sandstone K-Rend Silicone K1 Monocouche Scratch Render is a breathable polymer modified silicone-cement based self-coloured render designed for most spray machines and hand application within External Wall Insulation systems.
Monocouche Silicone K1 is specifically designed to incorporate the bene..
Pistachio K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attractive,..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
Pure White Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base ..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Sterling White K-Rend Silicone K1 Monocouche Scratch Render is a breathable polymer modified silicone-cement based self-coloured render designed for most spray machines and hand application within External Wall Insulation systems.
Monocouche Silicone K1 is specifically designed to incorporate the..
Pure White K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attractive..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
Rosemary Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base Co..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Stone K-Rend Silicone K1 Monocouche Scratch Render is a breathable polymer modified silicone-cement based self-coloured render designed for most spray machines and hand application within External Wall Insulation systems.
Monocouche Silicone K1 is specifically designed to incorporate the benefits..
Rosemary K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attractive, ..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
Sky Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base Coat (H..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Terracota K-Rend Silicone K1 Monocouche Scratch Render is a breathable polymer modified silicone-cement based self-coloured render designed for most spray machines and hand application within External Wall Insulation systems.
Monocouche Silicone K1 is specifically designed to incorporate the bene..
Sky K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attractive, low m..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
Sunflower Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base C..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
White K-Rend Silicone K1 Monocouche Scratch Render is a breathable polymer modified silicone-cement based self-coloured render designed for most spray machines and hand application within External Wall Insulation systems.
Monocouche Silicone K1 is specifically designed to incorporate the benefits..
Sunflower K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attractive,..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind
Wheaten Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base Coa..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
York K-Rend Silicone K1 Monocouche Scratch Render is a breathable polymer modified silicone-cement based self-coloured render designed for most spray machines and hand application within External Wall Insulation systems.
Monocouche Silicone K1 is specifically designed to incorporate the benefits ..
Wheaten K Rend Silicone TC 15 is an organic resin render incorporating a silicone resin emulsion and an acrylic resin dispersion in a ready to use render.
If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attractive, l..
Coverage approx. 10m2 per 25kg bucket
Ready to use - supplied in 25kg buckets
Do not apply onto damp or frozen substrates
Application temperature should be a minimum of 5°C
Do not apply in conditions of strong sunshine or wind