Largely manufactured from recycled glass (e.g. windscreens) and mineral base materials such as sand and without the use of binding agents. The ingredients are melted into molten glass, which is cooled and crushed into a fine powder. The powdered glass is poured into molds and heated (below the melting point) in a "sintering" process that causes the particles to adhere to one another. Next, a small amount of finely ground carbon-black is added and the material is heated in a "cellulation" process. Here, the carbon reacts with oxygen, creating carbon dioxide, which creates the insulating bubbles in the (material). CO2 accounts for more than 99% of the gas in the cellular spaces.
Cellulose insulation is a material made from recycled newspaper. The paper is shredded and inorganic salts, such as boric acid, are added for resistance to fire, mould, insects and vermin. The insulation is installed either blown or damp-sprayed depending on application.
Wood fibre
The success of wood fibre insulation derives from an attractive environmental profile combined with a whole bag of functions including rigid insulation, sheathing and sarking for timber frames, roofs and flooring as well as flexible insulation for studs and rafters.
Wood of course is renewable, it sequesters carbon during its growth and product production is relatively free from pollution. The insulation value of wood fibre boards is not as dimensionally efficient as some of the orthodox petro-chemical materials - but it's no slouch either - typically coming in with a 'k value' range of between 0.038-0.043 W/mK depending on format.
Hemp
Hemp fibres are produced from hemp straw of the hemp plant. Most hemp is imported, but an increasing amount of home-grown crop is becoming available. Hemp grows up to a height of nearly 4 metres within a period of 100-120 days. Because the plants shade the soil, no chemical protection or toxic additives are required for hemp cultivation. The product is composed of, usually, 85% hemp fibre with the ballance made up of polyester binding and 3-5% soda added for fire proofing.
Straw
Straw is an agricultural by-product, the dry stalks of cereal plants, after the grain and chaff have been removed. Straw makes up about half of the yield of cereal crops such asbarley, oats, rice, rye and wheat.
15mm PIR Rigid Insulation Board Xtratherm (Unilin) 1200mm x 1200mm is a thinnest rigid foil faced polyisocyanurate (PIR) thermal foam insulation board designed for roofs, walls, floors, timber and steel framed systems.
Unilin (Xtratherm) PIR insulation boards are stable, rot proof and will remain..
1200mm x 1200mm x 15mm
Foil Faced PIR Rigid Foam Insulation Board
Certified thermal conductivity as low as 0.022W/mK!
15mm Unilin XT/PR Thin-R Pitched Roof PIR Insulation Board is a thinnest PIR rigid thermal foam insulation board used in roof construction to achieve Future Home and Passive House Standards.
XT/PR Unilin PIR Board is a high performance foil faced rigid insulation foam with a certified thermal con..
15mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
15mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
15mm Unilin XT/TF Thin-R Timber Frame Insulation Board is a thinnest PIR rigid thermal foam insulation board used in wall construction to achieve Future Home and Passive House Standards.
XT/TF Unilin PIR Board is a high performance foil faced rigid insulation foam with a certified thermal conduct..
15mm Unilin XT/UF Thin-R Floor Insulation Board is a thinnest PIR rigid thermal foam insulation board used in floor construction to achieve Future Home and Passive House Standards.
XT/UF Underfloor Unilin PIR Board is a high performance insulation with a certified thermal conductivity of 0.022W/m..
15mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
15mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
15mm Unilin (Xtratherm) Thin-R Insulation Board (2400mm x 1200mm x 15mm) is an ultra thin rigid foil faced polyisocyanurate (PIR) thermal foam multi-application insulation board designed for roofs, walls, floors, timber and steel framed systems.
Xtratherm (Unilin) Thin-R range is a high-efficienc..
24.5mm (15mm) Unilin XT/TL Insulated Plasterboard is made of 15mm Unilin PIR insulation core bonded to 9.5mm plasterboard used for internal walls, ceilings, pitched and flat roof applications.
Unilin XT/TL Insulation and Drylining Board provides an effective vapour control layer and is suitable..
15mm Unilin PIR insulation core bonded to 9.5mm plasterboard
Used for internal walls, ceilings, pitched and flat roof applications
Suitable for a variety of wall types for both refurbishment and new build
Unilin XT/TL thermal laminate incorporates an integral vapour barrier
Improves energy efficiency of your home by reducing energy costs
24.5mm Xtratherm XT/TL Thermal Liner Composite Insulated Plasterboard Dot & Dab is an insulated panel combined of polyisocyanurate (PIR) rigid insulation foam core bonded to 9.5mm or 12.5mm tapered edge plasterboard that is suitable for internal applications, fixed with adhesive dot and dab direct b..
24.5mm Xtratherm Thin-R XT/TL-MF Thermal Liner Mech Fix is an insulated panel combined of PIR rigid insulation foam core bonded to 9.5mm plasterboard suitable for internal masonry walls, sloped rafters and ceilings.
Xtratherm XT/TL-MF Mechanically Fixed Drylining Board is a highly versatile and d..
Provides Effective Vapour Control Layer
Reducing Energy Consumption and Costs
For a Variety of Wall Types - Internal Walls, Sloped Roofs, Ceilings
Insulation & Drylining in one Application - Refurbishment & New Build
XT/TL-MF is only suitable for mechanically fixed applications
25mm Celotex CW4000 Partial Fill Cavity Wall Insulation Board (CW4025) is an easy to install PIR (polyisocyanurate) rigid insulation board, featuring a low emissivity foil facings with excellent thermal conductivity of 0.022 W/mk that is suitable for partial fill masonry cavity wall applications.
..
25mm Xtratherm FR/ALU Flat Roof PIR Insulation Board Thin-R is a top-class polyisocyanurate foam core insulation board with vapour resistant gas-tight foil facers suitable for loose laid ballasted and mechanically fixed single ply waterproofing systems.
Thin-R FR/ALU is a thermally efficient roof..
BBA Certification No. 11/4817
Vapour resistant foil facers
Loose laid ballasted systems
Thermal Conductivity: 0.022W/mK
Compatible with mechanically fixed single ply systems
25mm Xtratherm Thin-R FR/BGM Flat Roof Insulation Board is a high-quality polyisocyanurate core (PIR) rigid insulation board with bitumen glass fibre and mineral glass facings designed for partially bonded, torched-on and built-up bituminous felt systems.
Thin-R Xtratherm FR/BGM 25mm x 600mm x 12..
BBA Certification No. 11/4878.
Built-up Bituminous Felt Systems
Insulation for Torched-on Systems
Insulation for Partially Bonded Systems
Mechanically Fastened or Loose Laid Ballasted Bituminous Systems
25mm Xtratherm Thin-R FR/MG Flat Roof Insulation is a high-quality polyisocyanurate foam core (PIR) insulation board with mineral coated glass facers designed for use below single ply fully adhered roof membranes, single ply waterproofing systems and partially bonded built-up felt.
Xtratherm Flat..
25mm Xtratherm Safe-R SR/PR Pitched Roof Insulation Board is a high-class rigid phenolic foam insulation board with a low emissivity foil facings designed for pitched roofs, sloped roofs, ventilated roofs, hybrid roofs and warm roofs.
Xtratherm SR/PR range is a BBA certified high-efficiency therm..
BBA Certification No. 10/4803
Thermal Conductivity: 0.021W/mK
Reaction to Fire Euroclass B-s1, d0
Reduced Thermal Bridging and Risk of Condensation
Lightweight and Easy to Install - Superior Performance Phenolic Insulation
25mm Xtratherm Safe-R SR/UF Floor Insulation Board is a top-class rigid phenolic foam insulation board with a low emissivity aluminium foil facings designed for ground supported floors, suspended floors and underfloor heating (UFH).
Xtratherm SR/UF range is a BBA certified high-efficiency thermal..
The 25mm Unilin Thin-R FR/BGM Flat Roof Insulation Board is faced with a polypropylene fleece finished bitumen glass-fibre working surface and a mineral glass facing to the underside.
FR/BGM boards are suitable for use with most bitumen based, partially bonded waterproofing systems typically incl..
Unilin FR/BGM Flat Roof Insulation Board 25mm x 600mm x 1200mm
Faced with a polypropylene fleece finished bitumen glass-fibre working surface
Faced with a mineral glass facing to the underside insulation board surface
Used for partially bonded torched-on built-up bituminous felt systems
Can be used as a cheaper alternative to Celotex and Kingspan TR24 Insulation
25mm Unilin Flat Roof FR/MG is a high performance Polyisocyanurate with mineral coated glass facers suitable for use below single ply waterproofing systems and partially bonded built-up felt.
FR/MG Insulation Board for use as a thermal insulation layer and to create or improve falls on limited ac..
25mm x 600mm x 1200mm Unilin FR/MG Flat Roof Insulation Board
High Performance PIR Insulation Board with mineral coated glass facers
For concrete, timber or metal flat roof decks in domestic and non-domestic buildings
Used below single ply waterproofing systems and partially bonded built-up felt
Can be used as a cheaper alternative to Celotex and Kingspan Therma Roof Insulation
25mm Unilin Thin-R XT/CW PIR Cavity Insulation Board is used in traditional masonry walls, built to the highest thermal standards whilst maintaining a residual cavity, offering protection from wind driven rain.
Unilin Cavity Wall (T&G) tongue and groove jointing offers a practical onsite solution..
25mm Unilin Thin-R XT/CW Partial Fill Cavity Wall Insulation Board
Reduced the Thermal Bridging and improved the U-Value of the wall
Low emissivity foil facing on XT/CW improves the thermal performance
Recommended residual cavity width is 50mm (Building Regulations)
Most effective method of preventing wind-driven rain penetrating a wall
25mm XO/UF Underfloor Heating Insulation Board Xtratherm Xtroliner is an improved performance PIR (polyisocyanurate) rigid foam floor insulation board with robust textured foil facings designed for ground supported floors, suspended floors and underfloor heating.
Xtratherm Xtroliner XO/UF is a BB..
Suitable for Underfloor Heating - UFH
High Compressive Strength >150 (kPa)
Premium PIR Insulation - Thermal Conductivity: 0.021W/mK
27.5mm Celotex PL4000 PIR Thermal Insulation Board (PL4015) is an easy to install high-performance insulated plasterboard consist of polyisocyanurate rigid insulation foam core bonded to 12.5mm plasterboard that can be used in pitched roofs (underneath the rafters), flat roofs (underneath the joists..
Vapour Barrier build in
External walls – internal lining
Pitched roofs – underneath the rafters
Flat roofs – underneath the joists
Time saving 2 in 1 solution - insulate and dry line walls
27.5mm Xtratherm XT/TL-MR Thermaliner PIR Moisture Resistant is an insulated plasterboard combined of PIR insulation core bonded to 12.5mm moisture resistant plasterboard designed for internal building areas of high humidity conditions.
XT/TL-MR Thermal Liner Unilin is designed to improve moistur..
Provides Effective Vapour Control Layer
Improving Moisture Resistance and Thermal Performance
Applications: Kitchen and Bathroom Walls and Ceiling Installations...
Insulation & Drylining in one Application - Refurbishment & New Build
Strong Moisture Resistant Paperliners - Water Repellent
30mm Xtratherm XPS 300 is a high performance rigid extruded polystyrene insulation board providing a durable thermal solution to technically demanding applications where high compressive loading of 300kPa is a requirement.
Extruded Polystyrene XPS 300 is an ideal solution for use in commercial, i..
30mm Extruded Polystyrene Xtratherm XPS 300 kPa
For use in commercial, industrial and cold storage areas
Closed-cell structure, which prevents moisture-absorption
Very low lambda values and compressive loading capabilities
Xtratherm XPS Sheets are 1250mm long by 600mm wide boards
32.5mm Ultra Liner Insulated Plasterboard is a high-performance PIR rigid insulation board bonded to 12.5mm tapered edge plasterboard used for walls, ceiling and pitched roof applications.
This ultimate thermal laminate insulation board provides high levels of insulation and drylining in one appl..
32.5mm x 1200mm x 2400mm PIR Insulated Plasterboard
Ultimate thermal laminate insulation board for drylining
Ultraliner is used for walls, ceiling and pitched roof applications
PIR insulation core thermal conductivity (lambda) of 0.022W/mK
Ultra Liner PIR provides an effective Vapour Control Layer (VCL)
37.5mm Safe-R SR/TB Thermal Liner Xtratherm Insulated Plasterboard is a combination of 25mm premium phenolic insulation core with a composite foil facing bonded to 12.5mm tapered edge plasterboard for dry lining internal walls.
Safe-R Xtratherm SR/TB Thermal Liner is a high-efficiency thermal ins..
BBA Certification No.10/4803.
Integral Vapour (Check) Control Layer
Reaction to Fire Euroclass B-s1, d0
Suitable for Newbuild and Renovation Projects
High levels of insulation and drylining in one fix
40mm Kingspan TW50 Thermawall Cavity Wall Insulation Board is a high-efficiency, BBA certified cavity insulation board designed for partial fill masonry cavity walls.
Thermawall TW50 is a stable and rot proof cavity wall insulation board used in newbuild and extension projects and will remain eff..
40mm Xtratherm XT/CW Partial Fill Cavity Wall is a high-quality, BBA certified, tongue and groove PIR insulation board with certified thermal conductivity of 0.022 W/mK designed for use in traditional masonry partial fill cavity walls.
Xtratherm Cavity Wall is a highly-durable, rot proof insulati..
50mm SR/CW Partial Fill Cavity Wall Insulation Xtratherm Safe-R is a top-class phenolic foam rigid cavity insulation board with a low emissivity foil facings designed for use in traditional masonry walls.
A high-performance BBA certified 1200mm x 450mm x 50mm square edge board with an approved th..
50mm Framing Board Xtratherm Safe-R SR/FB is a top-class rigid foam phenolic insulation board with a low emissivity foil facings designed for use with steel and timber frame applications up to 18m in height.
A high-performance BBA certified phenolic 2400mm x 1200mm square edge panel with an appro..
Suitable for use in Steel and Timber Frame Systems
Superior Lambda Value as low as 0.021W/mK
Provides excellent U-Values and improved thermal bridging detailing
Can be used between studs or as an insulated sheathing board
50mm Rainscreen Cladding Insulation Xtratherm Safe-R SR/RS is a high-class rigid phenolic insulation board with a low emissivity foil facings designed for ventilated rainscreen cladding applications in new build and refurbishment projects
Xtratherm SR/RS 2400mm x 1200mm x 50mm insulation boards a..
Lower Lambda values for improved U-Values
Superior Lambda Value as low as 0.021W/mK
BBA Certified - Certification Number 10/4803
Tested and Approved under BS 8414 and BR135
Euroclass B Fire Classification - Rainscreen Applications
50mm Soffit Insulation Board Xtratherm Safe-R SR/ST is a high-class rigid phenolic soffit insulation board with a low emissivity foil facings designed for structural ceiling applications.
Xtratherm SR/ST is a BBA certified high-efficiency thermal insulation with an approved thermal conductivity (..
Lower Lambda values for improved U-Values
Superior Lambda Value as low as 0.021W/mK
BS EN ISO 14001 Environmental Management System
BS EN ISO 9001 Quality Management System
Euroclass B Fire Classification - Reduced Thermal Bridging
50mm Xtratherm Thin-R XT/CWP Cavity Wall Plus is a robust tongue and groove jointing PIR (polyisocyanurate) rigid insulation board with a low emissivity foil facings, used for traditional masonry partial fill cavity walls.
XT/CWP Cavity Wall Plus (T&G) is the best solution when building tradition..
50mm Xtratherm XT/CWP Cavity Wall Plus Insulation Board
Lower Lambda value (thermal conductivity) of 0.021 W/mK
Enhanced performance PIR (polyisocyanurate) rigid insulation
Easy to install tongue and groove (T&G) jointing system
Used as a traditional masonry partial fill cavity wall insulation
50mm Xtratherm SW/RS Stone Wool Insulation Slab is a non-combustible euroclass A1 stonewool insulation slab with an improved acoustic performance used for ventilated rainscreen cladding systems in standard and high rise buildings.
The SW/RS range of stone wool insulation provides surety when the ..
50mm Xtratherm Xtroliner XO/CW is an improved performance PIR (polyisocyanurate) tongue and groove insulation board with robust foil facings designed for partial fill cavity wall insulation with an approved thermal conductivity (lambda value) as low as 0.021W/mK.
This lower lambda improves U-Valu..
50mm Xtratherm Xtroliner Framing Board XO/FB is an improved performance PIR (polyisocyanurate) insulation board with robust textured foil facings designed for use in a wide range of construction including steel or timber frame applications up to 18m in height.
The Xtratherm Xtroliner XO/FB framin..
BBA Certificate 12/4956
Thermal Conductivity: 0.021W/mK
Reaction to Fire Euroclass C-s2, d0
Reduced Thermal Bridging - Robust Textured Foil
Suitable for Newbuild and Renovation up to 18m in height
50mm XO/SK Xtratherm Xtroliner Warm Pitched Roof Insulation is an improved performance PIR (polyisocyanurate) engineered tongue and grooved insulation board with robust textured foil facings designed for use in warm roof construction systems.
Xtratherm Xtroliner XO/SK 50mm is a premium external r..
56mm Soffit Plus Insulation Panel Xtratherm Safe-R SR/STP (Decorative Finish) is a top-class two-in-one composite insulation board which provides an effective thermal and fire performance solution in structural ceiling applications for commercial and residential buildings.
Safe-R SR/STP 56mm is a..
Decorative Finish may be Applied
Superior Lambda Value as low as 0.021W/mK
Phenolic Insulation bonded to Impact Resistant 6mm Building Panel
Structural ceiling applications in commercial and residential buildings
Euroclass B Fire Classification - Reduced Thermal Bridging
56mm Xtratherm Xtroliner XO/STP Soffit Insulation Board is a top-class two-in-one PIR insulation product which provides an effective thermal and fire performance solution in structural ceiling applications.
Used in commercial and residential buildings that can be fixed directly to the concrete sl..
75mm Unilin CavityTherm CT/PIR Insulation Board is a high performance composite board of enhanced PIR with a lambda value of 0.021 W/mK, for full fill cavity wall applications.
CavityTherm is proven to provide the most cost effective answer, not only reaching Future Homes Standard fabric U-Values..
75mm CavityTherm Unilin Insulation for full fill cavity wall applications
CavityTherm is an innovative built-in insulation for traditional walls
CavityTherm achieves passive level U-Values as low as 0.12 W/m2K
Made of an enhanced PIR core with thermal conductivity of 0.021W/mK
CavityTherm Unilin is a continuous insulation system for full fill cavities
75mm Xtratherm CT/PIR CavityTherm Thin-R is a cost effective rigid polyisocyanurate thermal insulation board used for traditional full fill cavity walls to provide excellent U-Values and meet the Passive House standards.
Xtratherm CT/PIR Cavity Wall insulation is a top-class composite board of en..
75mm Recticel Eurowall PLUS PIR Cavity Insulation Board is a high-performance polyisocyanurate rigid foam insulation board faced with a gas diffusion tight multilayer foil on both sides suitable for full fill cavity wall applications with a minimum residual cavity of 10mm, up to 25m in height.
Eu..
75mm Xtratherm Hyfloor XT/HYF Under Floor Insulation is an excellent tongue and grooved floor insulation board with a certified thermal conductivity (lambda value) of 0.021 W/mK which is suitable for use with underfloor heating.
Xtratherm Thin-R PLUS HYFLOOR XT/HYF has high compressive strength o..
75mm Xtratherm Thin-R PLUS XT/HYF Hyfloor Insulation Board
Enhanced performance PIR tongue and grooved floor insulation
PIR rigid foam core with low emissivity gas tight foil facings
Used for underfloor heating systems, solid and suspended floors
100mm Xtratherm Thin-R PLUS XT/HYF Hyfloor is an enhanced performance PIR tongue and grooved floor insulation board with a certified thermal conductivity of 0.021W/mK, used for underfloor heating systems, solid and suspended floors.
Xtratherm Thin-R PLUS HYFLOOR XT/HYF 100mm has high compressive ..
100mm Xtratherm Thin-R PLUS XT/HYF Hyfloor Insulation Board
Enhanced performance PIR tongue and grooved floor insulation
PIR rigid foam core with low emissivity gas tight foil facings
Used for underfloor heating systems, solid and suspended floors
20mm Unilin XT/PR Thin-R Pitched Roof PIR Insulation Board is a rigid thermal foam insulation board used in roof construction, designed to achieve Future Home and Passive House Standards.
XT/PR PIR Board 20mm is a high performance foil faced insulation foam board with a certified thermal conducti..
20mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
20mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
20mm Unilin PIR Insulation Board XT/TF Timber Frame is used between studs or as an insulating sheathing material for steel and timber framing wall applications.
XT/TF Unilin PIR Board is a high performance foil faced rigid insulation foam with a certified thermal conductivity of 0.022W/mK which h..
20mm Unilin XT/UF Thin-R Floor Insulation Board is a rigid thermal foam insulation board used in floor construction, designed to achieve Future Home and Passive House Standards.
XT/UF Underfloor Unilin PIR Board is a high performance insulation with a certified thermal conductivity of 0.022W/mK w..
20mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
20mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
20mm Xtratherm PIR Thin-R Insulation Board (2400mm x 1200mm x 20mm) is a rigid foil faced polyisocyanurate (PIR) thermal foam insulation board designed for roofs, walls, floors, timber and steel framed systems.
Xtratherm Thin-R range is a high-efficiency foil faced PIR insulation with a certified..
27.5mm (15mm) Unilin XT/TL Dot&Dab Insulated Plasterboard is made of 15mm PIR insulation bonded to 12.5mm plasterboard used for internal walls, ceilings, pitched and flat roof applications.
Unilin XT/TL Insulation and Drylining Board provides an effective vapour control layer and is suitable for ..
15mm Unilin PIR insulation core bonded to 12.5mm plasterboard
Used for internal walls, ceilings, pitched and flat roof applications
Suitable for a variety of wall types for both refurbishment and new build
Unilin XT/TL thermal laminate incorporates an integral vapour barrier
Improves energy efficiency of your home by reducing energy costs
27.5mm Xtratherm XT/TL Thermal Liner is an insulated panel combined of PIR rigid insulation foam core bonded to 9.5mm or 12.5mm tapered edge plasterboard that is suitable for internal applications, fixed with adhesive dot and dab direct bonding.
Xtratherm XT/TL Drylining Board is a highly versati..
27.5mm Xtratherm Thin-R XT/TL-MF is an insulated board combined of PIR rigid insulation foam core bonded to 12.5mm plasterboard designed to provide high levels of thermal insulation for internal masonry walls, sloped rafters and ceilings.
Xtratherm XT/TL-MF Mechanically Fixed Drylining Board is a..
Provides Effective Vapour Control Layer
Reducing Energy Consumption and Costs
For a Variety of Wall Types - Internal Walls, Sloped Roofs, Ceilings
Insulation & Drylining in one Application - Refurbishment & New Build
XT/TL-MF is only suitable for mechanically fixed applications
30mm Xtratherm FR/BGM Thin-R Flat Roof Insulation Board is a high-quality polyisocyanurate core (PIR) insulation board with bitumen glass fibre and mineral glass facing designed for partially bonded, torched-on and built-up bituminous felt systems.
Xtratherm Flat Roof Thin-R board can also be use..
BBA Certification No. 11/4878.
Built-up Bituminous Felt Systems
Insulation for Torched-on Systems
Insulation for Partially Bonded Systems
Mechanically Fastened or Loose Laid Ballasted Bituminous Systems
30mm Xtratherm Thin-R FR/MG Flat Roof Insulation is a high-quality polyisocyanurate foam core (PIR) insulation board with mineral coated glass facers designed for use below single ply fully adhered roof membranes, single ply waterproofing systems and partially bonded built-up felt.
Xtratherm Flat..
30mm FR/BGM Unilin Thin-R Flat Roof Insulation Board is a PIR (polyisocyanurate) rigid foam thermal insulation board used for partially bonded torched-on built-up bituminous felt systems.
FR/BGM boards are suitable for use with most bitumen based, partially bonded waterproofing systems typically ..
Unilin FR/BGM Flat Roof Insulation Board 30mm x 600mm x 1200mm
Faced with a polypropylene fleece finished bitumen glass-fibre working surface
Faced with a mineral glass facing to the underside insulation board surface
Used for partially bonded torched-on built-up bituminous felt systems
Can be used as a cheaper alternative to Celotex and Kingspan TR24 Insulation
30mm Unilin FR/MG comprises a rigid Polyisocyanurate (PIR) core between mineral glass facings suitable for use below single ply waterproofing systems and partially bonded built-up felt.
FR/MG Insulation Board for use as a thermal insulation layer and to create or improve falls on limited access c..
30mm x 600mm x 1200mm Unilin FR/MG Flat Roof Insulation Board
High Performance PIR Insulation Board with mineral coated glass facers
For concrete, timber or metal flat roof decks in domestic and non-domestic buildings
Used below single ply waterproofing systems and partially bonded built-up felt
Can be used as a cheaper alternative to Celotex and Kingspan Therma Roof Insulation
30mm XO/UF Underfloor Heating Insulation Board Xtratherm Xtroliner is an improved performance PIR (polyisocyanurate) rigid foam floor insulation board with robust textured foil facings designed for ground supported floors, suspended floors and underfloor heating.
Xtratherm Xtroliner XO/UF is a BB..
Suitable for Underfloor Heating - UFH
High Compressive Strength >150 (kPa)
Premium PIR Insulation - Thermal Conductivity: 0.021W/mK
32.5mm Celotex PL4000 Insulated Plasterboard (PL4020) is a high-performance PIR (polyisocyanurate) rigid insulation foam board bonded to 12.5mm tapered edge wallboard that can be used in pitched roofs (underneath the rafters), flat roofs (underneath the joists) and internal wall lining applications...
Vapour Barrier build in
External walls – internal lining
Pitched roofs – underneath the rafters
Flat roofs – underneath the joists
Time saving 2 in 1 solution - insulate and dry line walls
32.5mm Xtratherm XT/TL-MR Thermaliner is an insulated plasterboard combined of PIR insulation core bonded to 12.5mm green moisture resistant plasterboard designed for internal building areas of high humidity conditions.
XT/TL-MR Thermal Liner Thin-R is designed to improve moisture resistance and ..
Provides Effective Vapour Control Layer
Improving Moisture Resistance and Thermal Performance
Applications: Kitchen and Bathroom Walls and Ceiling Installations...
Insulation & Drylining in one Application - Refurbishment & New Build
Strong Moisture Resistant Paperliners - Water Repellent
Ultraliner Insulated Plasterboard is a 37.5mm thick laminated board, a high-performance PIR core bonded to 12.5mm tapered edge plasterboard used for walls, ceiling and pitched roof applications.
This ultimate thermal laminate insulation board 37.5x1200x2400mm provides high levels of insulation an..
37.5mm x 1200mm x 2400mm PIR Insulated Plasterboard
Ultimate thermal laminate insulation board for drylining
Ultraliner is used for walls, ceiling and pitched roof applications
PIR insulation core thermal conductivity (lambda) of 0.022W/mK
Ultra Liner PIR provides an effective Vapour Control Layer (VCL)
40mm Celotex CW4000 Partial Fill Cavity Wall Insulation Board (CW4040) is an easy to install PIR (polyisocyanurate) rigid insulation board, featuring a low emissivity foil facings with excellent thermal conductivity of 0.022 W/mk that is suitable for partial fill masonry cavity wall applications.
..
40mm Xtratherm FR/ALU Flat Roof PIR Insulation Board Thin-R is a top-class polyisocyanurate foam core insulation board with vapour resistant gas-tight foil facers suitable for loose laid ballasted and mechanically fixed single ply waterproofing systems.
Xtratherm Thin-R FR/ALU 2400mm x 1200mm x 4..
BBA Certification No. 11/4817
Vapour resistant foil facers
Loose laid ballasted systems
Thermal Conductivity: 0.022W/mK
Compatible with mechanically fixed single ply systems
40mm Xtratherm Safe-R SR/PR Pitched Roof Insulation Board is a high-class rigid phenolic foam insulation board with a low emissivity foil facings designed for pitched roofs, sloped roofs, ventilated roofs, hybrid roofs and warm roofs.
Xtratherm SR/PR range is a BBA certified high-efficiency therm..
BBA Certification No. 10/4803
Thermal Conductivity: 0.021W/mK
Reaction to Fire Euroclass B-s1, d0
Reduced Thermal Bridging and Risk of Condensation
Lightweight and Easy to Install - Superior Performance Phenolic Insulation