Largely manufactured from recycled glass (e.g. windscreens) and mineral base materials such as sand and without the use of binding agents. The ingredients are melted into molten glass, which is cooled and crushed into a fine powder. The powdered glass is poured into molds and heated (below the melting point) in a "sintering" process that causes the particles to adhere to one another. Next, a small amount of finely ground carbon-black is added and the material is heated in a "cellulation" process. Here, the carbon reacts with oxygen, creating carbon dioxide, which creates the insulating bubbles in the (material). CO2 accounts for more than 99% of the gas in the cellular spaces.
Cellulose insulation is a material made from recycled newspaper. The paper is shredded and inorganic salts, such as boric acid, are added for resistance to fire, mould, insects and vermin. The insulation is installed either blown or damp-sprayed depending on application.
Wood fibre
The success of wood fibre insulation derives from an attractive environmental profile combined with a whole bag of functions including rigid insulation, sheathing and sarking for timber frames, roofs and flooring as well as flexible insulation for studs and rafters.
Wood of course is renewable, it sequesters carbon during its growth and product production is relatively free from pollution. The insulation value of wood fibre boards is not as dimensionally efficient as some of the orthodox petro-chemical materials - but it's no slouch either - typically coming in with a 'k value' range of between 0.038-0.043 W/mK depending on format.
Hemp
Hemp fibres are produced from hemp straw of the hemp plant. Most hemp is imported, but an increasing amount of home-grown crop is becoming available. Hemp grows up to a height of nearly 4 metres within a period of 100-120 days. Because the plants shade the soil, no chemical protection or toxic additives are required for hemp cultivation. The product is composed of, usually, 85% hemp fibre with the ballance made up of polyester binding and 3-5% soda added for fire proofing.
Straw
Straw is an agricultural by-product, the dry stalks of cereal plants, after the grain and chaff have been removed. Straw makes up about half of the yield of cereal crops such asbarley, oats, rice, rye and wheat.
Fischer DIPK 8/20-40 Render Only Fixing (boxed in 200's) is a drive anchor consisting of a white fixing sleeve with an integrated plate and a glass-fibre reinforced plastic nail used in render-only EWI systems.
Render Only Fixings Fischer DIPK 8 are suitable for a wide range of building materials..
100mm Unilin Close-R Fire Rated Cavity Closer, a rigid phenolic core between foil facings and stone wool wrapped in a protective red sleeve to achieve a minimum 60 minutes fire resistance.
Safe-R Close-R Cavity Closer achieves an excellent fire rating and allows for the correct placement of wall ..
100mm Unilin Safe-R Close-R Insulated Fire Rated Cavity Closer FR
Cavity Closer achieves an excess of 4 hour fire rating in a 150mm cavity
Fire Rated Cavity Closer is used around window and door openings
Safe-R Close-R is preventing cold bridging, damp penetration and condensation
Suites 100 - 150mm cavities and meets Building Regulations requirements
100mm XT/CL Close-R Checked fit (Brick Outer) is a cavity closer used for closing the cavities around window and door openings, preventing cold bridging, damp penetration and condensation.
Unilin Close-R XT/CL Reveal Closers range is used to close cavities and is suited to all types of windows an..
100mm Unilin XT/CL Close-R PIR Insulated Cavity Closer Checked Fit
Checked Fit (Brick Outer) Cavity Closer used for closing the cavities
XT/CL Close-R is used around window and door openings
Close-R is preventing cold bridging, damp penetration and condensation
Suites 100 - 150mm cavities - meets Building Regulations requirements
100mm XT/CL Close-R Flanged fit (Concrete Outer) is a cavity closer used for closing the cavities around window and door openings, preventing cold bridging, damp penetration and condensation.
Unilin Close-R XT/CL Reveal Closers range is used to close cavities and is suited to all types of windows..
100mm Unilin XT/CL Close-R PIR Insulated Cavity Closer Flanged Fit
Flanged fit (Concrete Outer) Cavity Closer used for closing the cavities
XT/CL Close-R is used around window and door openings
Close-R is preventing cold bridging, damp penetration and condensation
Suites 100 - 150mm cavities - meets Building Regulations requirements
100x225x1200mm Hyfloor Strip Foundation System Unilin XT/HYF is an engineered floor insulation used to achieve Future Homes Standard and passive floor performance.
The Hyfloor Strip Foundation System provides effective insulation that has been detailed and installed professionally at the initial ..
100x225x1200mm Hyfloor Strip Foundation System Unilin XT/HYF
Engineered floor insulation with high performance foundation riser panels
Used to achieve Future Homes Standard and passive floor performance
Hyfloor System that provides thermal performance and robust detailing
Suitable for use with built-in full fill and partial fill wall insulation
10mm Grey EPS for External Wall Insulation (Graphite Expanded Polystyrene) is an insulating material with about 20-25% better thermal insulation properties than basic white EPS that can effectively reduce heating costs and improve the appearance of the building.
Complete external wall insulation ..
External Wall Insulation Systems
Lightweight - Cost efficient - Durable
High Resistance to Mold Growth
Thermal Conductivity: 0.031W/mK
Easily cut with a sharp knife to any size and shape
110mm Fire Rated Fixing MLN (diameter 8mm) is an universal metal façade fixing with high corrosion resistance used for Rainscreen Insulation in Ventilated Cladding Systems to fix and secure insulation panels.
MLN Fire Rated Fixings are suitable for mineral wool (MW) boards, glass wool, lightweigh..
110mm x 8mm Fire Rated Fixing MLN (pack of 50 fixings)
Universal metal façade fixing with high corrosion resistance
For Rainscreen Insulation in Ventilated Cladding Systems
For fixing and securing insulation panels (substrates: A, B, D, E)
115mm Metal Pin Insulation Board Screw Fixing is a plastic body fixing with metal pin, used to fix the thermal insulation boards to the wide range of substrates like concrete, brick and other blockwork in an External Wall Insulation (EWI) system.
WKTHERM metal mechanical fixing 115mm is made from..
115mm Metal Pin Insulation Board Fixings
Metal screw with plastic bodies
Keeps the thermal bridging down to a minimum
Drill the hole, Mount the fastener and Hammer in the metal pin
For substrates: Concrete, Brick and other Blockwork
115mm RAWLPLUG R-TFIX-8S Metal Screw Fixing (box of 200) is a highly durable, versatile screw-in facade fixing that offers quick, easy and precise installation in all substrates (categories A, B, C, D and E) with its unique sleeve compression zone.
Metal Screw Fixing 115mm is designed for Externa..
115mm RAWLPLUG (R-TFIX-8S)
Quick and easy installation
Unique sleeve compression zone
Easy installation in all substrates (categories A, B, C, D, E)
External Thermal Insulation Composite Systems (ETICS)
Siniat Weather Defence External Sheathing Board 12.5mm x 1200mm x 2400mm is a strong, moisture resistant A1 non-combustible exterior sheathing board faced with water repellent material that is compliant for structures above 18m in height.
Weather Defence™ is a revolutionary facade external sheath..
15mm PIR Rigid Insulation Board Xtratherm (Unilin) 1200mm x 1200mm is a thinnest rigid foil faced polyisocyanurate (PIR) thermal foam insulation board designed for roofs, walls, floors, timber and steel framed systems.
Unilin (Xtratherm) PIR insulation boards are stable, rot proof and will remain..
1200mm x 1200mm x 15mm
Foil Faced PIR Rigid Foam Insulation Board
Certified thermal conductivity as low as 0.022W/mK!
15mm Unilin XT/PR Thin-R Pitched Roof PIR Insulation Board is a thinnest PIR rigid thermal foam insulation board used in roof construction to achieve Future Home and Passive House Standards.
XT/PR Unilin PIR Board is a high performance foil faced rigid insulation foam with a certified thermal con..
15mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
15mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
15mm Unilin XT/TF Thin-R Timber Frame Insulation Board is a thinnest PIR rigid thermal foam insulation board used in wall construction to achieve Future Home and Passive House Standards.
XT/TF Unilin PIR Board is a high performance foil faced rigid insulation foam with a certified thermal conduct..
15mm Unilin XT/UF Thin-R Floor Insulation Board is a thinnest PIR rigid thermal foam insulation board used in floor construction to achieve Future Home and Passive House Standards.
XT/UF Underfloor Unilin PIR Board is a high performance insulation with a certified thermal conductivity of 0.022W/m..
15mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
15mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
15mm Unilin (Xtratherm) Thin-R Insulation Board (2400mm x 1200mm x 15mm) is an ultra thin rigid foil faced polyisocyanurate (PIR) thermal foam multi-application insulation board designed for roofs, walls, floors, timber and steel framed systems.
Xtratherm (Unilin) Thin-R range is a high-efficienc..
20mm Aluminium Base Track is a high-quality resistant to corrosion and atmospheric factors baserail profile designed for external wall insulation systems and thin coat rendering.
Base Bead is used in EWI systems as a cover for the lower part of the thermal insulation material of Expanded Polystyr..
20mm Aluminium Vented Base Track Timber Frame is a high-quality resistant to corrosion and atmospheric factors ventilated profile designed for external wall insulation systems and thin coat rendering as a cover for the lower part of the thermal insulation boards: Expanded Polystyrene (EPS), Kingspan..
20mm Aluminium Vented Base Track SF is a high quality resistant to corrosion and weather conditions ventilated profile designed for External Wall Insulation (EWI) systems and thin coat rendering.
Ventilated Base Track 20mm is used in insulated render systems as a cover for the lower part of the 2..
20mm White EPS External Wall Insulation Board (EPS70) is an easy to handle and install Expanded Polystyrene Insulation material used as a main component of external wall insulation systems and thin coat rendering.
White EPS (Polystyrene) 20mm is a lightweight basic insulation material available a..
External Wall Insulation Systems - EWI
Easily cut with a sharp knife to any size and shape
20mm Kingspan Kooltherm K5 Wall Board is a high-performance masonry wall insulation board, with a fibre-free rigid thermoset phenolic core used for external wall insulation behind traditional, lightweight thin coat rendering and dry cladding systems.
Kooltherm K5 External Wall Board 20mm is a pre..
20mm Kooltherm K5 Kingspan External Wall Board
Certified Thermal Conductivity of 0.022 W/mK
Fire Rating (Reaction to Fire) Euroclass C-s2,d0
Resistant to the passage of Water Vapour
For use behind traditional and lightweight polymer Renders
20mm Stylite Plustherm Grey EPS EWI 70 External Wall Insulation Board is a high performance thermal insulation board manufactured from Expanded Polystyrene (EPS), used in External Wall Insulation (EWI) systems to meet Building Regulations for thermal performance.
Stylite Expanded Polystyrene Insu..
24.5mm (15mm) Unilin XT/TL Insulated Plasterboard is made of 15mm Unilin PIR insulation core bonded to 9.5mm plasterboard used for internal walls, ceilings, pitched and flat roof applications.
Unilin XT/TL Insulation and Drylining Board provides an effective vapour control layer and is suitable..
15mm Unilin PIR insulation core bonded to 9.5mm plasterboard
Used for internal walls, ceilings, pitched and flat roof applications
Suitable for a variety of wall types for both refurbishment and new build
Unilin XT/TL thermal laminate incorporates an integral vapour barrier
Improves energy efficiency of your home by reducing energy costs
24.5mm Unilin XT/TL-MF (Mech Fix) is a foil backed insulated plasterboard made of 15mm Unilin PIR insulation core bonded to 9.5mm plasterboard used for internal walls, sloped roofs and ceilings.
The composite foil facing on Unilin XT/TL-MF Insulation and Drylining Board provides a gas and vapour ..
24.5mm Xtratherm XT/TL Thermal Liner Composite Insulated Plasterboard Dot & Dab is an insulated panel combined of polyisocyanurate (PIR) rigid insulation foam core bonded to 9.5mm or 12.5mm tapered edge plasterboard that is suitable for internal applications, fixed with adhesive dot and dab direct b..
24.5mm Xtratherm Thin-R XT/TL-MF Thermal Liner Mech Fix is an insulated panel combined of PIR rigid insulation foam core bonded to 9.5mm plasterboard suitable for internal masonry walls, sloped rafters and ceilings.
Xtratherm XT/TL-MF Mechanically Fixed Drylining Board is a highly versatile and d..
Provides Effective Vapour Control Layer
Reducing Energy Consumption and Costs
For a Variety of Wall Types - Internal Walls, Sloped Roofs, Ceilings
Insulation & Drylining in one Application - Refurbishment & New Build
XT/TL-MF is only suitable for mechanically fixed applications
25mm Celotex CW4000 Partial Fill Cavity Wall Insulation Board (CW4025) is an easy to install PIR (polyisocyanurate) rigid insulation board, featuring a low emissivity foil facings with excellent thermal conductivity of 0.022 W/mk that is suitable for partial fill masonry cavity wall applications.
..
25mm Xtratherm FR/ALU Flat Roof PIR Insulation Board Thin-R is a top-class polyisocyanurate foam core insulation board with vapour resistant gas-tight foil facers suitable for loose laid ballasted and mechanically fixed single ply waterproofing systems.
Thin-R FR/ALU is a thermally efficient roof..
BBA Certification No. 11/4817
Vapour resistant foil facers
Loose laid ballasted systems
Thermal Conductivity: 0.022W/mK
Compatible with mechanically fixed single ply systems
25mm Xtratherm Thin-R FR/BGM Flat Roof Insulation Board is a high-quality polyisocyanurate core (PIR) rigid insulation board with bitumen glass fibre and mineral glass facings designed for partially bonded, torched-on and built-up bituminous felt systems.
Thin-R Xtratherm FR/BGM 25mm x 600mm x 12..
BBA Certification No. 11/4878.
Built-up Bituminous Felt Systems
Insulation for Torched-on Systems
Insulation for Partially Bonded Systems
Mechanically Fastened or Loose Laid Ballasted Bituminous Systems
25mm Xtratherm Thin-R FR/MG Flat Roof Insulation is a high-quality polyisocyanurate foam core (PIR) insulation board with mineral coated glass facers designed for use below single ply fully adhered roof membranes, single ply waterproofing systems and partially bonded built-up felt.
Xtratherm Flat..
25mm Heavy Duty Full System Stop Bead with PVC Drip-Nosing is a perforated full system stop profile designed for External Wall Insulation (EWI) and thin coat rendering made from PPC Galvanised Steel used on the sides of insulated render systems as a cover for the thermal insulation boards: Expanded ..
Stop System - Galvanised Steel - PVC NOSE
FULL SYSTEM HEAVY DUTY STOP BEAD with Nose
Stop Track - Stop Rail - Stop Profile - Drip bead
External Wall Insulation Systems - Full Stop Bead
Provides additional protection against Abrasion and Corrosion
25mm Stainless Steel Full System Stop Bead with PVC Drip-Nosing is a special perforated full system stop profile designed for External Wall Insulation (EWI) and thin coat rendering made from resistant to corrosion and staining, low maintenance stainless steel.
The Stop T-Tracks are used on the si..
Stop System - PVC NOSE - STAINLESS STEEL TRACK
SS FULL SYSTEM HEAVY DUTY STOP BEAD with Nose
Stainless Steel: Stop Track - Stop Rail - Stop Profile with nose
External Wall Insulation System - Full Stop Bead Stainless Steel
Provides additional protection against Abrasion and Corrosion
25mm Galvanised Steel Heavy Duty Base Track with PVC Drip Bead 2500mm is a special full system starter profile designed for External Wall Insulation (EWI) and thin coat rendering made from PPC Galvanised Steel.
It is used in insulated render systems as a cover for the lower part of the thermal in..
BASE PROFILE - PPC GALVANISED - PVC NOSE
FULL SYSTEM HEAVY DUTY BASE BEAD with Nose
Base Track - Base Rail - Starter Profile - Drip bead
25mm Heavy Duty Base Track PPC is a starter profile for External Wall Insulation (EWI) systems and thin coat rendering made from polyester powder coated Galvanised Steel which is less expensive than stainless steel.
HD Base Track 25mm is used in insulated render systems as a cover for the lower p..
Heavy Duty Base Track with PVC Nosing Drip Bead 25mm is a professional full system starter profile specially designed for External Wall Insulation (EWI) and thin coat rendering made from resistant to corrosion and staining, low maintenance stainless steel.
It is used in insulated render systems a..
Premium Stainless Steel - PVC NOSE
FULL SYSTEM HEAVY DUTY BASE BEAD with Nose
Base Track - Base Rail - Starter Profile - Drip bead
External Wall Insulation Systems - Stainless Steel
Provides additional protection against Abrasion and Corrosion
25mm Single Board Kingspan Kooltherm® K5 Insulation is an advanced external wall insulation board for masonry walls, with a fibre-free rigid thermoset phenolic core, used for external wall insulation systems and thin coat rendering.
The K5 boards are suitable for use behind traditional and lightw..
Single Board 25mm Kingspan Kooltherm K5 External Wall Insulation
600mm x 1200mm Kooltherm K5 Thermal conductivity 0.022W/mK
Used for external wall thermal insulation systems, thin coat rendering
Perfect solution for buildings that can’t be insulated on the inside
The thinnest commonly used External Wall Insulation (EWI) Board
25mm Xtratherm Safe-R SR/PR Pitched Roof Insulation Board is a high-class rigid phenolic foam insulation board with a low emissivity foil facings designed for pitched roofs, sloped roofs, ventilated roofs, hybrid roofs and warm roofs.
Xtratherm SR/PR range is a BBA certified high-efficiency therm..
BBA Certification No. 10/4803
Thermal Conductivity: 0.021W/mK
Reaction to Fire Euroclass B-s1, d0
Reduced Thermal Bridging and Risk of Condensation
Lightweight and Easy to Install - Superior Performance Phenolic Insulation
25mm Xtratherm Safe-R SR/UF Floor Insulation Board is a top-class rigid phenolic foam insulation board with a low emissivity aluminium foil facings designed for ground supported floors, suspended floors and underfloor heating (UFH).
Xtratherm SR/UF range is a BBA certified high-efficiency thermal..
The 25mm Unilin Thin-R FR/BGM Flat Roof Insulation Board is faced with a polypropylene fleece finished bitumen glass-fibre working surface and a mineral glass facing to the underside.
FR/BGM boards are suitable for use with most bitumen based, partially bonded waterproofing systems typically incl..
Unilin FR/BGM Flat Roof Insulation Board 25mm x 600mm x 1200mm
Faced with a polypropylene fleece finished bitumen glass-fibre working surface
Faced with a mineral glass facing to the underside insulation board surface
Used for partially bonded torched-on built-up bituminous felt systems
Can be used as a cheaper alternative to Celotex and Kingspan TR24 Insulation
25mm Unilin Flat Roof FR/MG is a high performance Polyisocyanurate with mineral coated glass facers suitable for use below single ply waterproofing systems and partially bonded built-up felt.
FR/MG Insulation Board for use as a thermal insulation layer and to create or improve falls on limited ac..
25mm x 600mm x 1200mm Unilin FR/MG Flat Roof Insulation Board
High Performance PIR Insulation Board with mineral coated glass facers
For concrete, timber or metal flat roof decks in domestic and non-domestic buildings
Used below single ply waterproofing systems and partially bonded built-up felt
Can be used as a cheaper alternative to Celotex and Kingspan Therma Roof Insulation
25mm Unilin Thin-R XT/CW PIR Cavity Insulation Board is used in traditional masonry walls, built to the highest thermal standards whilst maintaining a residual cavity, offering protection from wind driven rain.
Unilin Cavity Wall (T&G) tongue and groove jointing offers a practical onsite solution..
25mm Unilin Thin-R XT/CW Partial Fill Cavity Wall Insulation Board
Reduced the Thermal Bridging and improved the U-Value of the wall
Low emissivity foil facing on XT/CW improves the thermal performance
Recommended residual cavity width is 50mm (Building Regulations)
Most effective method of preventing wind-driven rain penetrating a wall
25mm Unilin Xtroliner XO/PR is a warm roof construction board, comprising a rigid foam modified Polyisocyanurate (PIR) core with robust textured low emissivity aluminium foil facings.
Using XO/PR used above or between the roof rafters ensures that the structure is kept at or near the internal env..
25mm Unilin XO/PR XtroLiner Pitched Warm Roof PIR Insulation Board
Used above or between the rafters reducing thermal stress and condensation risk
Rigid foam modified Polyisocyanurate (PIR) core with textured robust facings
Lambda (thermal conductivity) of 0.021 W/mK and Euroclass C s2 d0 fire classification
Used on ventilated, hybrid or warm and sloped roofs to achieve most efficient U-values
25mm XO/UF Underfloor Heating Insulation Board Xtratherm Xtroliner is an improved performance PIR (polyisocyanurate) rigid foam floor insulation board with robust textured foil facings designed for ground supported floors, suspended floors and underfloor heating.
Xtratherm Xtroliner XO/UF is a BB..
Suitable for Underfloor Heating - UFH
High Compressive Strength >150 (kPa)
Premium PIR Insulation - Thermal Conductivity: 0.021W/mK
25mm XtroDeck XO/XD Unilin is faced with an embossed aluminum facing on both sides high performance flat roof board used for partially bonded, self adhered built-up bituminous felt roof systems.
Flat Roof Insulation XO/XD is manufactured to EN 13165 by Unilin Insulation with a declared lambda (th..
25mm Unilin Xtroliner XtroDeck XO/XD Flat Roof PIR Insulation Board
Premium Rigid PIR Insulation Board with an embossed aluminum facings
Used for partially bonded, self adhered built-up bituminous felt roof systems
Lambda (thermal conductivity) of 0.021 W/mK and Euroclass C s2 d0 fire classification
Unilin XtroDeck XO/XD flat roof insulation board may also be fully bonded
27.5mm Celotex PL4000 PIR Thermal Insulation Board (PL4015) is an easy to install high-performance insulated plasterboard consist of polyisocyanurate rigid insulation foam core bonded to 12.5mm plasterboard that can be used in pitched roofs (underneath the rafters), flat roofs (underneath the joists..
Vapour Barrier build in
External walls – internal lining
Pitched roofs – underneath the rafters
Flat roofs – underneath the joists
Time saving 2 in 1 solution - insulate and dry line walls
27.5mm (28mm) XT/TL-FR is a fire resistant insulated plasterboard made of 15mm Unilin PIR foam insulation core bonded to 12.5mm fire plasterboard used in drylining applications where fire rating is crucial.
Fire Resistant Insulated Plasterboard with a Pink Paper Face offers 30 minutes fire protec..
27.5mm (28mm) XT/TL-FR Fire Resistant Insulated Plasterboard
Fire plasterboard used in drylining applications where fire rating is crucial
Pink Paper Front Face offers 30 minutes fire protection in a single layer
Provides an effective vapour control layer (integral vapour barrier build in)
FR Insulated Plasterboard can be readily cut using a sharp knife or fine toothed saw
27.5mm Unilin XT/TL-MR is a moisture resistant insulated plasterboard made of 15mm Unilin PIR foam insulation core bonded to 12.5mm moisture resistant plasterboard used in high humidity conditions.
Unilin XT/TL-MR Moisture Resistant Insulation Board improves moisture resistance and thermal perfor..
27.5mm Xtratherm XT/TL-MR Thermaliner PIR Moisture Resistant is an insulated plasterboard combined of PIR insulation core bonded to 12.5mm moisture resistant plasterboard designed for internal building areas of high humidity conditions.
XT/TL-MR Thermal Liner Unilin is designed to improve moistur..
Provides Effective Vapour Control Layer
Improving Moisture Resistance and Thermal Performance
Applications: Kitchen and Bathroom Walls and Ceiling Installations...
Insulation & Drylining in one Application - Refurbishment & New Build
Strong Moisture Resistant Paperliners - Water Repellent
30mm Aluminium Flexible (Flexi) Slotted Base Track is a resistant to corrosion and atmospheric factors flexi base trim designed for curved walls in EWI (external wall insulation) systems and thin coat rendering.
To install a crinkle crankle flexi profile, slit the rear mounting leg and then bend ..
30mm Window Sill Extension (Metal Oversill and Eaves Flashing Extender) is a non-corrosive aluminium ledge profile suitable for EWI (external wall insulation) systems, thin coat rendering and most conditions requiring the weathering.
WEC721 Sill extender is a 2500mm long trim made from 1.2mm thic..
Full End Caps Pair - included
Sill Cover (Type 721)
Material thickness: 1.2mm thick
Length 2.5m - for most EWI External Wall Insulation projects
White Coated on BOTH SIDES, the blue covering is a protection and can be torn off
30mm Aluminium Soffit Eaves Flashing and Window Sill Extension is a non-corrosive aluminium ledge extender trim suitable for EWI (external wall insulation) systems, thin coat rendering and most conditions requiring the weathering.
WEC741 Window Sill Extender 30mm is a 2500mm long profile made fro..
Full End Caps Pair - included
Soffit Eaves Flashing (Type 741)
Material thickness: 1.2mm thick
Length 2.5m - EWI External Wall Insulation Systems
White Coated on BOTH SIDES - blue covering protection
30mm Kingspan GreenGuard GG300 XPS Insulation (Kingspan Styrozone) is an insulation board with high compressive strength for specialist applications such as basements, car parks, inverted roofs and heavy-duty commercial, industrial and cold store flooring.
GG300 XPS Board 30mm x 600mm x 1250mm is..
30mm Kingspan GreenGuard GG300 R
Rigid XPS Insulation Kingspan Styrozone
Fibre-free rigid extruded polystyrene XPS
Insulation board with high compressive strength (stress)
Basements, car parks, inverted roofs and cold store flooring
30mm Stainless Steel Base Track is a top-class resistant to corrosion and staining, low maintenance profile designed for external wall insulation systems and thin coat rendering.
Starter Track Stainless Steel 30mm is used in EWI systems as a cover for the lower part of the thermal insulation mate..
30mm Sundolitt® XPS300 (300kPa) Insulation Board is a highly-durable rigid thermal insulation board made of extruded polystyrene used in high moisture environments such as inverted roofs, flat or zero pitch roofs and green roofs systems.
XPS 300 Sundolitt is a lightweight, easy to cut extruded po..
30mm Aluminium Oversill and Window Sill Extension (External Window Sill Extender) is an easy to install non-corrosive trim suitable for EWI systems and most conditions requiring the weathering.
Universal External Window Sill Extender 30mm is designed to extend the length of an existing window sil..
Designed to extend the length of an existing window sill
Over Trim Extension (Type 761)
Material thickness: 1.2mm - O'Sill
Length 2.5m - EWI External Wall Insulation
White Coated on BOTH SIDES - Blue Covering Protection
XPS Insulation Sheets 30mm Finnfoam is an extruded polystyrene insulating material with fantastic thermal properties, good moisture resistance (reduces the risk of water penetration) and good compressive strength of 130kPa.
30mm Extruded Polystyrene (XPS) Board is a high density insulation board ..
30mm Soprema XPS 300 SL is a high quality, waterproof and strong rigid extruded polystyrene insulation board used as a durable thermal solution to technically demanding applications where high compressive loading (300kPa) is a requirement.
XPS SL 300 1250mm x 600mm x 30mm is designed for use in c..
30mm BASF Styrodur® 3000 CS XPS Insulation Board is an innovative multipurpose thermal insulation board made of extruded polystyrene with smooth surfaces and shiplap edges for almost all applications in structural and civil engineering.
Styrodur® 3000 CS XPS comes in 1265mm long by 615mm wide she..
30mm Xtratherm XPS 300 is a high performance rigid extruded polystyrene insulation board providing a durable thermal solution to technically demanding applications where high compressive loading of 300kPa is a requirement.
Extruded Polystyrene XPS 300 is an ideal solution for use in commercial, i..
30mm Extruded Polystyrene Xtratherm XPS 300 kPa
For use in commercial, industrial and cold storage areas
Closed-cell structure, which prevents moisture-absorption
Very low lambda values and compressive loading capabilities
Xtratherm XPS Sheets are 1250mm long by 600mm wide boards
32.5mm Ultra Liner Insulated Plasterboard is a high-performance PIR rigid insulation board bonded to 12.5mm tapered edge plasterboard used for walls, ceiling and pitched roof applications.
This ultimate thermal laminate insulation board provides high levels of insulation and drylining in one appl..
32.5mm x 1200mm x 2400mm PIR Insulated Plasterboard
Ultimate thermal laminate insulation board for drylining
Ultraliner is used for walls, ceiling and pitched roof applications
PIR insulation core thermal conductivity (lambda) of 0.022W/mK
Ultra Liner PIR provides an effective Vapour Control Layer (VCL)
37.5mm Safe-R SR/TB Thermal Liner Xtratherm Insulated Plasterboard is a combination of 25mm premium phenolic insulation core with a composite foil facing bonded to 12.5mm tapered edge plasterboard for dry lining internal walls.
Safe-R Xtratherm SR/TB Thermal Liner is a high-efficiency thermal ins..
BBA Certification No.10/4803.
Integral Vapour (Check) Control Layer
Reaction to Fire Euroclass B-s1, d0
Suitable for Newbuild and Renovation Projects
High levels of insulation and drylining in one fix
40mm Aluminium Stop Track is a high-quality resistant to corrosion and atmospheric factors end trim designed for EWI (external wall insulation) systems and thin coat rendering.
The wall insulation stop end profile is an aluminium plain mill finish box shaped bead designed for various thicknesses ..
40mm Undersill Flashing and Metal Window Sill Extension is a non-corrosive aluminium ledge profile suitable for EWI (external wall insulation) systems, thin coat rendering and most conditions requiring the weathering.
WEC731 Sill Extender 40mm is a 2500mm long trim made from 1.2mm thick aluminium..
For most conditions requiring the weathering
Sill Cover (Type 731) - Undersill
Material thickness: 1.2mm thick
Length 2.5m - for most EWI External Wall Insulation projects
White Coated on BOTH SIDES - with blue covering protection
40mm Danopren XPS TR40 (Styrofoam) Insulation is a closed-cell extruded polystyrene foam board, commonly called 'Blue Board', manufactured as foam thermal insulation sheets used as an insulation in walls, roofs, foundations and as a water barrier.
XPS Insulation Danopren is an easy and safe to ha..
40mm Aluminium Perforated Closure and Insect Mesh Profile for Cedral is an accessory system trim that can be used at both the top and bottom of the Cedral Weatherboard Cladding to protect against pest infestation and debris.
Perforated Closure Profile perforations are 3mm by 10mm and cover both t..
40mm Kingspan TW50 Thermawall Cavity Wall Insulation Board is a high-efficiency, BBA certified cavity insulation board designed for partial fill masonry cavity walls.
Thermawall TW50 is a stable and rot proof cavity wall insulation board used in newbuild and extension projects and will remain eff..
40mm Xtratherm XT/CW Partial Fill Cavity Wall is a high-quality, BBA certified, tongue and groove PIR insulation board with certified thermal conductivity of 0.022 W/mK designed for use in traditional masonry partial fill cavity walls.
Xtratherm Cavity Wall is a highly-durable, rot proof insulati..
Countersunk Screws for Cedral Lap Cladding (pack of 200) are resistant to corrosion and staining, low maintenance self tapping, 4.2mm diameter and 45mm long screws designed for fixing the Cedral Fibre Cement Weatherboard Cladding.
45mm Stainless Steel Cedral Countersunk Screws can be used for the..
SS C/S Screws - 45mm Long
SS C/S Screws - 4.2mm Diameter
Coverage - 8 fixings per board to allow wastage
Stainless Steel Countersunk Screws - pack of 200
Self Tapping Screws suitable for fixing in the Lap System
Hammer Fix Stainless Steel 45mm Nails for Cedral Lap Cladding Weatherboards are resistant to corrosion and staining, low maintenance, 2.8mm diameter and 45mm long nails designed for fixing the Cedral Cladding.
45mm Stainless Steel Nails can be used for the trims and Cedral fibre-cement planks, pa..
SS Nails - 45mm Long
SS Nails - 2.8mm Diameter
Coverage - 9 fixings per board to allow wastage
Stainless Steel Nails - Hammer Fix - pack of 500
SS Nails Hammer Fix - suitable for fixing in the Lap System
50mm Aluminium Oversill and Window Sill Extension (O'sill Extender 751) is a non-corrosive aluminium ledge trim suitable for EWI (external wall insulation) systems, thin-coat rendering and most conditions requiring the weathering.
WEC751 Window Sill Extender 50mm is a 2500mm long profile made fro..
50mm Aluminium Verge Over Trim Profile Type 771 is an universal flashing profile manufactured in 1.2mm pre-coated white aluminium in 2500mm lengths.
It can be fitted either with a low-expansion foam or a weatherproof silicone sealant to meet the recommendations of insulation systems manufacturers..
50mm Aluminium Verge Over Trim Profile Type 771 in 2500mm lengths
Universal flashing over-trim profile manufactured in 1.2mm pre-coated white
Can be fitted with a low-expansion foam or a weatherproof silicone sealant
Over Trim Flashing is suitable for newbuild, retrofit and refurbishment projects
Suitable for external wall insulation systems, thin-coat rendering and weathering
50mm CTP Wood Fixings for Timber Frame is a high-quality polypropelene head and steel nail fixing designed to secure insulation panels such as EPS (expanded polystyrene) or phenolic Kingspan K5.
Friulsider CTP Timber structure insulation panel fixings are suitable for rigid and semi-rigid insulat..
50mm Kingspan GreenGuard GG500 XPS Insulation (Kingspan Styrozone) is a rigid XPS board formerly known as Kingspan Styrofoam that can be used for specialist applications where the high compressive strength (stress) is required.
GreenGuard GG500 XPS Sheets 50mm x 600mm x 1250mm are resistant to th..
50mm Kingspan GreenGuard GG500 500kPa
Rigid XPS Insulation Kingspan Styrozone Styrofoam
Fibre-free rigid extruded polystyrene XPS Sheets
Insulation board with high compressive strength (stress)
Basements, car parks, inverted roofs and cold store flooring
50mm Aluminium Flashing Profile Grind in Verge Trim Type 781 is an universal flashing profile manufactured in 1.2mm pre-coated white aluminium in 2500mm lengths.
Grind in Verge Trim is designed to improve visual appearance of the building and to help prevent the water blowing up and soaking behin..
50mm Grind in Verge Trim Aluminium Flashing Profile Type 781 - 2500mm long
Grind in verge trim manufactured in 1.2mm pre-coated white aluminium profile
Can be fitted with a low-expansion foam or a weatherproof silicone sealant
Grind In Trim Flashing is suitable for newbuild, retrofit and refurbishment projects
Suitable for external wall insulation systems, thin-coat rendering and weathering
50mm Rockwool DD External Wall Dual Density Slab is a façade thermal and acoustic insulation slab developed for insulated render systems in new build and refurbishment projects to prevent the spread of fire.
Rockwool DD is a high-performance, non-combustible stone wool slab used to insulate the w..
50mm Screws with Wall Plugs for Fixing Base Track Starter Profile are strong and durable steel screws with wall plugs used to attach the aluminium base track to the substrate in External Wall Insulation (EWI) systems.
Screws and Plugs for the Base Track set come in boxes of 200.
The Starter Tr..
50mm SR/CW Partial Fill Cavity Wall Insulation Xtratherm Safe-R is a top-class phenolic foam rigid cavity insulation board with a low emissivity foil facings designed for use in traditional masonry walls.
A high-performance BBA certified 1200mm x 450mm x 50mm square edge board with an approved th..
50mm Framing Board Xtratherm Safe-R SR/FB is a top-class rigid foam phenolic insulation board with a low emissivity foil facings designed for use with steel and timber frame applications up to 18m in height.
A high-performance BBA certified phenolic 2400mm x 1200mm square edge panel with an appro..
Suitable for use in Steel and Timber Frame Systems
Superior Lambda Value as low as 0.021W/mK
Provides excellent U-Values and improved thermal bridging detailing
Can be used between studs or as an insulated sheathing board
50mm Rainscreen Cladding Insulation Xtratherm Safe-R SR/RS is a high-class rigid phenolic insulation board with a low emissivity foil facings designed for ventilated rainscreen cladding applications in new build and refurbishment projects
Xtratherm SR/RS 2400mm x 1200mm x 50mm insulation boards a..
Lower Lambda values for improved U-Values
Superior Lambda Value as low as 0.021W/mK
BBA Certified - Certification Number 10/4803
Tested and Approved under BS 8414 and BR135
Euroclass B Fire Classification - Rainscreen Applications
50mm Soffit Insulation Board Xtratherm Safe-R SR/ST is a high-class rigid phenolic soffit insulation board with a low emissivity foil facings designed for structural ceiling applications.
Xtratherm SR/ST is a BBA certified high-efficiency thermal insulation with an approved thermal conductivity (..
Lower Lambda values for improved U-Values
Superior Lambda Value as low as 0.021W/mK
BS EN ISO 14001 Environmental Management System
BS EN ISO 9001 Quality Management System
Euroclass B Fire Classification - Reduced Thermal Bridging
50mm XO/CW T&G Unilin, comprising a rigid polyisocyanurate (PIR) foam insulation board with a textured aluminium foil-facing on both sides, for use as partial fill insulation.
Xtroliner XO/CW improves U-Values and meets Future Homes standards, providing an excellent choice for passive and low ene..
50mm Unilin XO/CW T&G Insulation Board for Partial Fill Cavity Walls
Xtroliner XO/CW improves U-Values and meets Future Homes standards
XO/CW Providing an excellent choice for passive and low energy builds
Can achieve a passive U-Value of 0.15 W/m2K in a traditional cavity wall
Lambda (thermal conductivity) of 0.021 W/mK and Euroclass C s2 d0 fire class
50mm Unilin XO/SK XtroLiner Sarking (T&G) is an engineered tongue and grooved external roof insulation system with robust facings which meets the passive U-Value of 0.15 W/m2K.
The XtroLiner Sarking XO/SK offers a robust continuous layer of insulation, minimising the threat of Thermal Bridging an..
50mm Unilin XO/SK XtroLiner Sarking Warm Roof Construction Board (T&G)
XO/SK used over the rafters to meet the passive U-Value of 0.15 W/m2K
Unilin XO/SK engineered tongue and grooved external roof insulation system
Rigid foam modified Polyisocyanurate (PIR) core with textured robust facings
Lambda (thermal conductivity) of 0.021 W/mK and Euroclass C s2 d0 fire class
50mm Unilin XT/CWP Thin-R Plus Partial Fill Cavity is a partial fill cavity system with engineered tongue and grooved joints to ensure insulation continuity and minimisation of thermal bridging.
The lower lambda (thermal conductivity) of 0.021 W/mK improves U-Values of the cavity and meets Future..
50mm Unilin Thin-R PLUS XT/CWP Partial Fill Cavity Wall Insulation
Reduced the Thermal Bridging and improved the U-Value of the wall
Low emissivity foil facing on XT/CWP improves the thermal performance
Recommended residual cavity width is 50mm (Building Regulations)
Most effective method of preventing wind-driven rain penetrating a wall
50mm Unilin XO/FB XtroLiner Framing Board is an insulation board designed for use in a wide range of constructions including steel or timber frame applications up to 11m in height.
XO/FB Framing Board used into the traditional cavity of the construction improves the value of the walls over the tr..
Unilin XO/FB XtroLiner Framing Board (Steel and Timber Frame Applications)
Rigid foam modified Polyisocyanurate (PIR) core with textured robust facings
Lambda (thermal conductivity) of 0.021 W/mK and Euroclass C s2 d0 fire class
Used between studs or as an insulated sheathing in a wide range of constructions
Suitable for new build and refurbishment projects in buildings up to 11m in height
50mm Aluminium Flashing Upstand Profile Verge Trim Type 791 is an universal flashing profile manufactured in 1.2mm pre-coated white aluminium in 2500mm lengths.
Verge Trim with Upstand has an up-stand that can be pushed under a barge board designed to reduces the need for a mastic seal and remove..
50mm Verge Trim Aluminium Flashing Profile with Upstand Section Type 791
Manufactured in 1.2mm pre-coated white aluminium in 2500m long lengths
Can be fitted with a low-expansion foam or a weatherproof silicone mastic sealant
Verge Trim Upstand Profile is suitable for newbuild, retrofit and refurbishment projects
For external wall insulation systems, thin-coat rendering, waterproofing and weathering
50mm Xtratherm Thin-R XT/CWP Cavity Wall Plus is a robust tongue and groove jointing PIR (polyisocyanurate) rigid insulation board with a low emissivity foil facings, used for traditional masonry partial fill cavity walls.
XT/CWP Cavity Wall Plus (T&G) is the best solution when building tradition..
50mm Xtratherm XT/CWP Cavity Wall Plus Insulation Board
Lower Lambda value (thermal conductivity) of 0.021 W/mK
Enhanced performance PIR (polyisocyanurate) rigid insulation
Easy to install tongue and groove (T&G) jointing system
Used as a traditional masonry partial fill cavity wall insulation
50mm Xtratherm SW/RS Stone Wool Insulation Slab is a non-combustible euroclass A1 stonewool insulation slab with an improved acoustic performance used for ventilated rainscreen cladding systems in standard and high rise buildings.
The SW/RS range of stone wool insulation provides surety when the ..
50mm Xtratherm Xtroliner XO/CW is an improved performance PIR (polyisocyanurate) tongue and groove insulation board with robust foil facings designed for partial fill cavity wall insulation with an approved thermal conductivity (lambda value) as low as 0.021W/mK.
This lower lambda improves U-Valu..
50mm Xtratherm Xtroliner Framing Board XO/FB is an improved performance PIR (polyisocyanurate) insulation board with robust textured foil facings designed for use in a wide range of construction including steel or timber frame applications up to 18m in height.
The Xtratherm Xtroliner XO/FB framin..
BBA Certificate 12/4956
Thermal Conductivity: 0.021W/mK
Reaction to Fire Euroclass C-s2, d0
Reduced Thermal Bridging - Robust Textured Foil
Suitable for Newbuild and Renovation up to 18m in height
50mm XO/SK Xtratherm Xtroliner Warm Pitched Roof Insulation is an improved performance PIR (polyisocyanurate) engineered tongue and grooved insulation board with robust textured foil facings designed for use in warm roof construction systems.
Xtratherm Xtroliner XO/SK 50mm is a premium external r..
50mm Unilin XO/UF XtroLiner Floorboard is faced with an embossed aluminum facing on both sides high performance floor insulation board suitable for underfloor heating applications.
Unilin XO/UF is lightweight, easy to install and combines high compressive strength with low thermal conductivity, p..
56mm Soffit Plus Insulation Panel Xtratherm Safe-R SR/STP (Decorative Finish) is a top-class two-in-one composite insulation board which provides an effective thermal and fire performance solution in structural ceiling applications for commercial and residential buildings.
Safe-R SR/STP 56mm is a..
Decorative Finish may be Applied
Superior Lambda Value as low as 0.021W/mK
Phenolic Insulation bonded to Impact Resistant 6mm Building Panel
Structural ceiling applications in commercial and residential buildings
Euroclass B Fire Classification - Reduced Thermal Bridging
56mm Unilin XO/STP Xtroliner Soffit Plus is an effective thermal and fire performance insulation solution used in structural ceiling applications in both commercial and residential buildings.
XO/STP Soffit Plus, comprising a rigid modified PIR core bonded to an impact-resistant 6mm building panel..
56mm Unilin XO/STP XtroLiner Soffit Plus Insulation for Structural Ceiling
Thermal and fire performance solution in structural ceiling applications
High performance insulation used in commercial and residential buildings
Impact-resistant 6mm building panel to which a decorative finish may be applied
Thermal conductivity (lambda) of 0.021 W/mK, Euroclass B s1 d0 fire classification
56mm Xtratherm Xtroliner XO/STP Soffit Insulation Board is a top-class two-in-one PIR insulation product which provides an effective thermal and fire performance solution in structural ceiling applications.
Used in commercial and residential buildings that can be fixed directly to the concrete sl..
60mm Kingspan GreenGuard GG700 Rigid XPS Sheet 700kPa (Styrofoam) is an easy to handle and install closed cell extruded polystyrene (XPS) insulation board used mainly as a high performance insulation for basements, car parks, inverted roofs and heavy-duty commercial, industrial and cold store floori..
60mm Kingspan GreenGuard GG700 700kPa
Rigid XPS Insulation Kingspan Styrozone Styrofoam
Fibre-free rigid extruded polystyrene XPS Sheets
Insulation board with high compressive strength (stress)
Basements, car parks, inverted roofs and cold store flooring
70mm Insulation Panel Fixings LMX10 (Metal Pin Hammer Fix Anchors) are highly-durable, impact resistant fasteners designed to fix and secure insulation panels to the variety of substrates, used for Rockwool DD slabs, EPS (expanded polystyrene) and Kingspan K5 insulation boards.
The mechanical anc..
Impact resistant polypropylene anchor
Zinc coated carbon steel expander pin
Anchor diameter - 10mm
Drill the hole - Mount the anchor - Hammer in the metal pin
70mm ISOfast Insulation Panel Fixings are strong, polypropylene fasteners designed to fix and secure insulation panels to the variety of substrates, used for grey EPS, white EPS (expanded polystyrene) and Kingspan Kooltherm K5 insulation boards.
The mechanical anchors are made from plastic, which..
Reduce thermal bridging within the system
The plastic core is 10mm in width
Fixings are strong and don’t snap when installed
Fixing used should be 40mm-60mm longer than the thickness of the insulation
Drill the hole - insert the fixings and hammer the palstic pin
75mm Unilin CavityTherm CT/PIR Insulation Board is a high performance composite board of enhanced PIR with a lambda value of 0.021 W/mK, for full fill cavity wall applications.
CavityTherm is proven to provide the most cost effective answer, not only reaching Future Homes Standard fabric U-Values..
75mm CavityTherm Unilin Insulation for full fill cavity wall applications
CavityTherm is an innovative built-in insulation for traditional walls
CavityTherm achieves passive level U-Values as low as 0.12 W/m2K
Made of an enhanced PIR core with thermal conductivity of 0.021W/mK
CavityTherm Unilin is a continuous insulation system for full fill cavities
75mm Xtratherm CT/PIR CavityTherm Thin-R is a cost effective rigid polyisocyanurate thermal insulation board used for traditional full fill cavity walls to provide excellent U-Values and meet the Passive House standards.
Xtratherm CT/PIR Cavity Wall insulation is a top-class composite board of en..
75mm Recticel Eurowall PLUS PIR Cavity Insulation Board is a high-performance polyisocyanurate rigid foam insulation board faced with a gas diffusion tight multilayer foil on both sides suitable for full fill cavity wall applications with a minimum residual cavity of 10mm, up to 25m in height.
Eu..
75mm Unilin XT/HYF HYFLOOR PIR Thin-R Plus is a thinnest floor insulation board with an excellent lambda value of 0.021 W/mK and outstanding thermal bridging performance.
Unilin Hyfloor XT/HYF has a superior thickness to performance ratio, allowing the lower targets required under Building Regula..
75mm Unilin XT/HYF HYFLOOR Thin-R Plus Floorboard Premium PIR
For use with underfloor heating, ground supported and suspended floors
Excellent lambda value (Thermal conductivity) of 0.021 W/mK
Unilin XT/HYF Meets U-Values specified in the Building Regulations
Improving the overall U-Value of the floor (XT/HYF HYFLOOR)
75mm Xtratherm Hyfloor XT/HYF Under Floor Insulation is an excellent tongue and grooved floor insulation board with a certified thermal conductivity (lambda value) of 0.021 W/mK which is suitable for use with underfloor heating.
Xtratherm Thin-R PLUS HYFLOOR XT/HYF has high compressive strength o..
75mm Xtratherm Thin-R PLUS XT/HYF Hyfloor Insulation Board
Enhanced performance PIR tongue and grooved floor insulation
PIR rigid foam core with low emissivity gas tight foil facings
Used for underfloor heating systems, solid and suspended floors
90mm FireBreak MBA Fixing for Ventilated Cladding Systems (8mm diameter) is a non-corrosive facade fixing, recommended for use when fire resistance (F120) is a requirement in external wall insulation (EWI) systems.
MBA Zinc Plated Fire Rated Fixing 90mm is used to fix the insulation boards to a w..
95mm RAWLPLUG (R-TFIX-8M) Metal Pin Hammer Fixing (box of 200) is a hammer-in façade fixing with steel nail recommended for External Thermal Insulation Composite Systems (ETICS).
Rawlplug Metal Pin Hammer Fixing 95mm is a versatile fixing offering quick, easy and precise installation in all subst..
90mm RAWLPLUG (R-TFIX-8M)
Metal Pin Hammer Fixing (box of 200)
Hammer-in façade fixing with steel nail
Easy installation in all substrates (categories A, B, C, D, E)
External Thermal Insulation Composite Systems (ETICS)
9mm Cembrit Windstopper Extreme Facade Board (1200mm x 2400mm - 2.88m²) is an external sheathing fibre-cement based building board with a 60/60 fire rating (class A2-s1), an ideal solution for exterior walls used as a temporary cladding.
Windstopper Extreme by Cembrit is a non-combustible, vapour..
Aluminium End Profile 45 for Cedral Lap White C01 is an universal aluminium 45mm end trim designed to protect the Cedral Lap end edges from wear and tear and to create a stop end to a run of cedral weatherboard cladding.
Cedral Lap End cladding trim 45mm is a 3000mm long Cedral Lap Weatherboard s..
End Profile 65 for Cedral Lap White C01 is an universal aluminium 65mm end trim used to protect the Cedral Lap end edges from wear and tear and to create a stop end to a run of weatherboard cladding.
Cedral Lap End 65mm trim is a 3000mm long Cedral Lap Weatherboard system profile made from 0.9mm ..
External Corner Aluminium Profile for Cedral Click Cladding White C01 is an universal aluminium corner trim that can be screwed or nailed vertically to the timber battens on 90 degree external corners of a build where the Click fibre-cement planks are required either side of the corner.
White C01..
Horizontal Aluminium Starter Profile for Cedral Click Cladding is an accessory L-shape system trim that can be screwed or nailed horizontally to the timber battens at the bottom of all horizontal Click Fibre-Cement Weatherboard Cladding.
Cedral Starter Profile (Horizontal) is used to start a cl..
Length: 3000mm
Accessory Trim for Click Fibre-Cement Weatherboard
Screwed or nailed horizontally to the timber battens
Cedral Cladding Starter Profile - Horizontal Starter Trim
Aluminium Starter Profile for White C01 Cedral Lap Cladding is an accessory kick-out trim that can be used to start a façade installation with a lip to cover the first batten or above windows and doors.
White C01 Cedral Lap Starter cladding trim is a 3000mm long Cedral Lap Weatherboard system pr..
Aluminium Connection Profile for White C01 Cedral Lap & Click Cladding is an universal L-shape trim used to wrap around the edge of the Cedral weatherboard on a door openings, window reveals or along the soffit or eaves lines.
The Cedral Connection Profile called as Window Reveal and Soffit trim ..