Largely manufactured from recycled glass (e.g. windscreens) and mineral base materials such as sand and without the use of binding agents. The ingredients are melted into molten glass, which is cooled and crushed into a fine powder. The powdered glass is poured into molds and heated (below the melting point) in a "sintering" process that causes the particles to adhere to one another. Next, a small amount of finely ground carbon-black is added and the material is heated in a "cellulation" process. Here, the carbon reacts with oxygen, creating carbon dioxide, which creates the insulating bubbles in the (material). CO2 accounts for more than 99% of the gas in the cellular spaces.
Cellulose insulation is a material made from recycled newspaper. The paper is shredded and inorganic salts, such as boric acid, are added for resistance to fire, mould, insects and vermin. The insulation is installed either blown or damp-sprayed depending on application.
Wood fibre
The success of wood fibre insulation derives from an attractive environmental profile combined with a whole bag of functions including rigid insulation, sheathing and sarking for timber frames, roofs and flooring as well as flexible insulation for studs and rafters.
Wood of course is renewable, it sequesters carbon during its growth and product production is relatively free from pollution. The insulation value of wood fibre boards is not as dimensionally efficient as some of the orthodox petro-chemical materials - but it's no slouch either - typically coming in with a 'k value' range of between 0.038-0.043 W/mK depending on format.
Hemp
Hemp fibres are produced from hemp straw of the hemp plant. Most hemp is imported, but an increasing amount of home-grown crop is becoming available. Hemp grows up to a height of nearly 4 metres within a period of 100-120 days. Because the plants shade the soil, no chemical protection or toxic additives are required for hemp cultivation. The product is composed of, usually, 85% hemp fibre with the ballance made up of polyester binding and 3-5% soda added for fire proofing.
Straw
Straw is an agricultural by-product, the dry stalks of cereal plants, after the grain and chaff have been removed. Straw makes up about half of the yield of cereal crops such asbarley, oats, rice, rye and wheat.
30mm Blue Dolphin Washi Painters Tape is an excellent quality rice paper tape that demonstrates phenomenal results in painting work with no signs of adhesive residue after peeling off the adhesive tape.
Japanese washi painter's tape is an ultra-thin rice paper tape that blocks the ingress of pain..
30mm Blue Dolphin Washi Painters Tape
60 days of UV resistance - Medium stickiness
Ultra-thin rice paper technology
Easily peeled off in over 60 days - 50m roll
No adhesive residue after peeling off the adhesive tape
30mm Blue Dolphin Masking Tape (50m roll) is a universal super smooth paper masking tape with excellent adhesion and a solvent free formula, used mainly as a protection in plastering and rendering jobs.
This professional tape leaves no residue on the substrates and protects the painted surface fo..
36mm Blue Dolphin Hybrid Painters Masking Tape (41.1m roll) is an ultimate 14 day UV stable, creped masking painters tape with non-yellowing solvent free adhesive, used for indoor or outdoor applications.
This professional tape will remove cleanly from painted walls, trim, woodwork, glass and met..
Cedral Touch Up Paint White C01 for Cedral Click and Lap Weatherboard Cladding is an acrylic based scratch repair paint that can be used to paint the cut edges of the weatherboards, small defects, damages and chippings or for coating the end of the boards, because they're not painted.
500ml Cedra..
Ceresit CT16 is a high-quality Priming Paint designed to add powerful adhesion between insulated render system layers.
Thanks to its rough structure CT16 primer strengthening the whole system and prevent stains formation on the final thin coat render.
CT16 paint can be applied to the surfaces..
BBA Certificate No. 14/5142
Assumed consumption: from 0.2 to 0.35 l/m2 / from 0.3 to 0.5 kg/m2 depending on the smoothness and absorption of the substrate
Approximate coverage per one bucket - 35m2 (15kg)
Temperature of application: from +5 °C to +25 °C
Easier application of plasters - Higher adhesion to the substrate - Ready to use
Ceresit CT17 PRIMER is a high-performance deep penetrating, fast drying priming paint designed for walls or ceilings inside and outside buildings prior to fixing insulation boards, ceramic tiles, papering or painting.
Application of Ceresit CT17 Profi is highly recommended for gypsum, anhydrite,..
Ceresit CT42 is a waterproof, highly breathable, fast-drying Acrylic Masonry Paint used for protecting external walls and concrete constructions.
This functional paint can be used indoor and outdoor on concrete, cement plasters, lime-cement and mineral substrates.
Very efficient paint, one buc..
BBA Certificate No. 14/5142
Assumed consumption: average approx. 0.3 l/m2 with two coatings
Ceresit CT48 Silicone Paint is a highly breathable, extremely durable, waterproof and resistant to environmental pollutants silicone self clean paint designed for buildings in busy areas or humid environments.
Ceresit CT48 is used for protecting facades, concrete constructions, indoor and outdoo..
BBA Certificate No. 14/5142
Assumed consumption: average approx. 0.3 l/m2 with two coatings
Ceresit CT49 Nano-Silicone Silix is a highly hydrophobic, vapour permeable premium paint for indoor and outdoor applications.
This paint is highly resistant to UV and weather conditions.
Ceresit Nano-Silicone paint extends the aesthetic effect and durability of coated surface.
CT49 Paint i..
BBA Certificate No. 14/5142
Assumed consumption: average approx. 0.3 l/m2 with two coatings
EWI-005 Silicone Paint 15litres is a ready-to-use masonry silicone paint used for painting over an existing render in order to refresh the façade and create an external wall finish that looks brand new, or to seal the mineral render.
Silicone paint is an easy to apply high-performance paint speci..
EWI-006 Silicone Paint Premium Bio is a masonry silicone paint used as a high performance, breathable finishing topcoat in the EWI Pro heritage system, as its breathability works well in conjunction with the breathable lime render.
EWI Pro Premium Bio Silicone Paint will actively resist organic g..
EWI-006 Silicone Paint Premium Bio 15l
High performance Masonry silicone paint
Application by brushes, rollers or spray equipment
Actively resist organic growth and dirt
Breathable finishing topcoat in the EWI Pro heritage system
EWI-007 Nano Drex Silicone Paint 15l is a highly hydrophobic external masonry silicone-based paint that contains nano-silicone particles which offers advanced self-cleaning capabilities and enhanced water repellency to any water that encounters the substrate.
Nano Drex Silicone Paint is the most ..
EWI-301 Water Based Substrate Primer 5l is a priming paint used to prepare the wall before installing external wall insulation or render-only systems.
Water Based Primer dries completely colourless and limits the absorptive capacity of the substrate, while simultaneously strengthening and stabili..
EWI-302 Deep Penetrating Primer is a substrate preparation priming paint, used for priming new build external walls prior to the application of renders or mortars.
This product is suitable for stabilising various different absorptive substrates, particularly new-build brick and blockwork, ordinar..
EWI-310 Universal Primer 20kg Priming Paint is used to prepare the walls before the application of EWI Pro adhesives to improve adhesion of the adhesive to the substrate, facilitating application and reducing groundwork absorbency.
Universal Primer EWI-310 is pigmented a red colour to enable ease..
EWI-310 Universal Primer 20kg Priming Paint
Improves adhesion of the adhesive to the substrate
EWI-330 Mineral and Acrylic Primer 20kg (Priming Paint) is a deep-penetrating primer, used for final preparation of surfaces prior to applying EWI Pro mineral, acrylic and mosaic renders to strengthen the substrate in External Wall Insulation systems.
Mineral & Acrylic Priming Paint facilitates r..
EWI-333 Top Coat Primer 20kg is a priming paint designed to be used in conjunction with any of silicone based renders to help strengthen the substrate and limit absorptive capacity of the base coat layer without compromising its breathability.
Most popular EWI-333 Top Coat Primer (Priming Paint) ..
Antique White Primer TC15 is a low odour, ready to use primer which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base Coat..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Beige C02 Touch Up Paint for Cedral Weatherboard Cladding is an acrylic based scratch repair paint used to paint the cut edges of the weatherboards, small defects, damages and chippings or for coating the end of the boards.
500ml Cedral touch up paint is an excellent solution to match the colour ..
EWI Pro EWI-005 Silicone Paint 5l bucket is a versatile masonry silicone paint used for painting over an existing render in order to refresh the façade and create an external wall finish that looks brand new, or to seal the mineral render.
Silicone paint is a high-performance paint specifically d..
EWI Pro EWI-330 Mineral and Acrylic Primer 7kg is a deep-penetrating priming paint, used for final preparation of surfaces prior to applying EWI Pro mineral, acrylic and mosaic renders to strengthen the substrate in External Wall Insulation systems.
Priming Paint for Acrylic, Mosaic and Mineral R..
EWI-333 Top Coat Primer 7kg Priming Paint is a water-based primer designed to be used in conjunction with any of silicone based renders to help strengthen the substrate and limit absorptive capacity of the base coat layer without compromising its breathability.
EWI Pro EWI-333 Top Coat Primer (Pr..
Ash White Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base C..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Blue Dolphin 48mm Masking Paper Tape (50m roll) is an excellent smooth paper masking tape with super adhesion properties and a solvent free formula, used mainly as a protection in plastering and rendering jobs.
This professional masking paper tape leaves no residue on the substrates and protects ..
Biscuit Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base Coa..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Weatherboard Touch Up Paint for Cedral Grey Brown C03 Cladding is an acrylic based scratch repair paint that can be used to paint the cut edges of the weatherboards, small defects, damages and chippings or for coating the end of the boards.
500ml Cedral touch up paint is an excellent solution to ..
Weatherboard Touch Up Paint for Grey C05 Cedral Click and Lap Cladding is an acrylic based scratch repair paint that can be used to paint the cut edges of the weatherboards, small defects, damages and chippings or for coating the end of the boards.
500ml Cedral touch up paint is an excellent solu..
Causeway Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base Co..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Cedral Touch Up Paint Cream White C07 for Cedral Click and Lap Weatherboard Cladding is an acrylic based scratch repair paint that can be used to paint the cut edges of the weatherboards, small defects, damages and chippings or for coating the end of the boards, because they're not painted.
500ml..
Corn Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base Coat (..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Golden Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base Coat..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Weatherboard Touch Up Paint for Dark Grey C15 Cedral Click and Lap System is an acrylic based scratch repair paint used to paint the cut edges of the weatherboards, small defects, damages and chippings or for coating the end of the boards.
500ml Cedral touch up paint is an excellent solution to m..
Granite Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base Coa..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Weatherboard Touch Up Paint for Cedral Slate Grey C18 Weatherboard Cladding is a scratch repair paint that can be used to paint the cut edges of the weatherboards, small defects, damages and chippings or for coating the end of the boards.
500ml Cedral touch up paint is an excellent solution to ma..
Weatherboard Touch Up Paint for Cedral Black C50 is an acrylic based scratch repair paint that can be used to paint the cut edges of the weatherboards, small defects, damages and chippings or for coating the end of the boards, because they're not painted.
500ml Cedral touch up paint is an excelle..
Light Bronze Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Bas..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Cedral Touch Up Paint Silver Grey C51 for Cedral Click and Lap Weatherboard Cladding is an acrylic based scratch repair paint that can be used to paint the cut edges of the weatherboards, small defects, damages and chippings or for coating the end of the boards, because they're not painted.
500ml..
Limestone White Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of ..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Linen Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base Coat ..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Cedral Touch Up Paint for Pewter C54 Weatherboard Cladding is an acrylic based scratch repair paint that can be used to paint the cut edges of the weatherboards, small defects, damages and chippings or for coating the end of the boards.
500ml Cedral touch up paint is an excellent solution to matc..
Cedral Touch Up Paint Light Oak CL104 for Cedral Lap Weatherboard Cladding is an acrylic based scratch repair paint that can be used to paint the cut edges of the weatherboards, small defects, damages and chippings or for coating the end of the boards, because they're not painted.
500ml Cedral to..
Mink Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base Coat (..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Cedral Touch Up Paint Dark Oak CL105 for Cedral Lap Weatherboard Cladding is an acrylic based scratch repair paint that can be used to paint the cut edges of the weatherboards, small defects, damages and chippings or for coating the end of the boards, because they're not painted.
500ml Cedral tou..
Mint Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base Coat (..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Mocha Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base Coat ..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Pearl Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base Coat ..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Pistachio Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base C..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Pure White Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base ..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Rosemary Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base Co..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Sky Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base Coat (H..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Sunflower Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base C..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind
Wheaten Primer TC15 is a low odour, ready to use priming paint which is quick and easy to apply by brush, roller or spray.
It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC 15 topcoat.
Primer TC should be used after the application of Base Coa..
Coverage approx. 50-60m2 per bucket
Ready to use - supplied in 15kg tubs
Application temperature should be a minimum of 5°C
Surface must be protected from rain and drying too fast
Do not apply in conditions of strong sunshine or wind