Largely manufactured from recycled glass (e.g. windscreens) and mineral base materials such as sand and without the use of binding agents. The ingredients are melted into molten glass, which is cooled and crushed into a fine powder. The powdered glass is poured into molds and heated (below the melting point) in a "sintering" process that causes the particles to adhere to one another. Next, a small amount of finely ground carbon-black is added and the material is heated in a "cellulation" process. Here, the carbon reacts with oxygen, creating carbon dioxide, which creates the insulating bubbles in the (material). CO2 accounts for more than 99% of the gas in the cellular spaces.
Cellulose insulation is a material made from recycled newspaper. The paper is shredded and inorganic salts, such as boric acid, are added for resistance to fire, mould, insects and vermin. The insulation is installed either blown or damp-sprayed depending on application.
Wood fibre
The success of wood fibre insulation derives from an attractive environmental profile combined with a whole bag of functions including rigid insulation, sheathing and sarking for timber frames, roofs and flooring as well as flexible insulation for studs and rafters.
Wood of course is renewable, it sequesters carbon during its growth and product production is relatively free from pollution. The insulation value of wood fibre boards is not as dimensionally efficient as some of the orthodox petro-chemical materials - but it's no slouch either - typically coming in with a 'k value' range of between 0.038-0.043 W/mK depending on format.
Hemp
Hemp fibres are produced from hemp straw of the hemp plant. Most hemp is imported, but an increasing amount of home-grown crop is becoming available. Hemp grows up to a height of nearly 4 metres within a period of 100-120 days. Because the plants shade the soil, no chemical protection or toxic additives are required for hemp cultivation. The product is composed of, usually, 85% hemp fibre with the ballance made up of polyester binding and 3-5% soda added for fire proofing.
Straw
Straw is an agricultural by-product, the dry stalks of cereal plants, after the grain and chaff have been removed. Straw makes up about half of the yield of cereal crops such asbarley, oats, rice, rye and wheat.
100mm Damp Proof Course DPC 500mu (30m roll) is a standard 100mm wide damp proofing barrier that is used to prevent rising damp, moving water up a walls and associated problems.
DPC provides damp proof protection, preventing ingress of external moisture and stopping damp rising up the walls.
T..
100mm Damp Proof Course DPC 500mu (30m roll)
Prevent rising damp, moving water up a walls
Suitable for brick, block, stone or concrete walls
Can be used for vertical and horizontal applications
100mm Unilin ECO/MA 360 Roof Insulation is a bio-enhanced, superior performance PIR rigid foam insulation board suitable for sloped roofs (ventilated, hybrid or warm roof).
Using pioneering environmentally conscious technology, ECO360 MA in roof applications will reduce heat loss while also deliv..
100mm Unilin ECO/MA 360 Bio-enhanced Roof PIR Insulation Board
High performance - Thermal conductivity (lambda value) of 0.020 W/mK
Unilin ECO360 Roofs meets U-Values specified in the Building Regulations
RIBA/RIAI Climate Challenge 2030, LETI Standards, Future Homes Hub targets
Bio-enhanced board will significantly improve the U-Value of new and existing roofs
100mm Unilin ECO/MA 360 (Sarking) Pitched Warm Roof Insulation is a bio-enhanced, superior performance PIR (polyisocyanurate) rigid foam insulation board suitable for pitched roofs.
Unilin Sarking Warm Roof Construction Board has the strength and thermal properties required to reach the high perf..
135mm Helical Flat Roof Nail Warm Roof Fixing is a high performance, self-tapping, zinc plated nail designed for a quick installation and securing structural 6mm Plywood or 9mm OSB composite insulation panels.
Helical Warm Roof Nails are a quick and reliable fixing method for energy efficient war..
15mm PIR Rigid Insulation Board Xtratherm (Unilin) 1200mm x 1200mm is a thinnest rigid foil faced polyisocyanurate (PIR) thermal foam insulation board designed for roofs, walls, floors, timber and steel framed systems.
Unilin (Xtratherm) PIR insulation boards are stable, rot proof and will remain..
1200mm x 1200mm x 15mm
Foil Faced PIR Rigid Foam Insulation Board
Certified thermal conductivity as low as 0.022W/mK!
15mm Unilin XT/PR Thin-R Pitched Roof PIR Insulation Board is a thinnest PIR rigid thermal foam insulation board used in roof construction to achieve Future Home and Passive House Standards.
XT/PR Unilin PIR Board is a high performance foil faced rigid insulation foam with a certified thermal con..
15mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
15mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
15mm Unilin XT/TF Thin-R Timber Frame Insulation Board is a thinnest PIR rigid thermal foam insulation board used in wall construction to achieve Future Home and Passive House Standards.
XT/TF Unilin PIR Board is a high performance foil faced rigid insulation foam with a certified thermal conduct..
15mm Unilin XT/UF Thin-R Floor Insulation Board is a thinnest PIR rigid thermal foam insulation board used in floor construction to achieve Future Home and Passive House Standards.
XT/UF Underfloor Unilin PIR Board is a high performance insulation with a certified thermal conductivity of 0.022W/m..
15mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
15mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
15mm Unilin (Xtratherm) Thin-R Insulation Board (2400mm x 1200mm x 15mm) is an ultra thin rigid foil faced polyisocyanurate (PIR) thermal foam multi-application insulation board designed for roofs, walls, floors, timber and steel framed systems.
Xtratherm (Unilin) Thin-R range is a high-efficienc..
20mm Kingspan ThermaFloor TF70 Floor Board is a fibre-free rigid thermoset foam insulation board used to insulate solid concrete, suspended ground floors and for use with underfloor heating systems.
Thermafloor TF70 Kingspan is a high performance flooring insulation suitable for use below the scr..
Thermal conductivity of 0.022 W/mK
Easy to handle and install
BBA Certificate 14/5133
NSAI Agrément Certificate 03/0196
INSULATION FOR SOLID CONCRETE AND SUSPENDED GROUND FLOORS
Kingspan ThermaPitch TP10 Board 20mm is a high performance pitched roof insulation board with fibre-free rigid thermoset PIR foam core used for under rafter or between and over joist applications.
20mm Thermapitch TP10 Kingspan PIR 2400mm x 1200mm board is an insulation sheet suitable for tiled o..
Thermal conductivity of 0.022 W/mK
Easy to handle and install
BBA Certificate 14/5133
NSAI Agrément Certificate 03/0196
INSULATION FOR TILED OR SLATED PITCHED WARM ROOF SPACES
20mm Kingspan Thermawall TW55 Insulation Board is a rigid insulation board used between studs or as an insulating sheathing material for steel and timber framing wall applications.
Thermawall TW55 Kingspan is a high performance insulation board suitable for use with timber frame and steel frame w..
21mm Xtratherm FR/TP Thin-R Thermal Ply Composite Board for Flat Roof is an insulated panel consist of PIR (polyisocyanurate) core with a composite foil facings, bonded to 6mm WBP grade plywood designed for new and refurbishment flat roofs.
FR/TP PIR and Plywood For Flat Roof is a three-in-one so..
21mm Unilin FR/TP Warm Roof Insulation Decking is an insulated panel made of 15mm PIR rigid foam insulation core bonded to 6mm WBP grade plywood used for new and refurbishment flat roof applications.
Unilin FR/TP Thermal Ply Flat Roof Insulation Board is faced to the under side with a gas-tight f..
24.5mm Xtratherm Thin-R XT/TL-MF Thermal Liner Mech Fix is an insulated panel combined of PIR rigid insulation foam core bonded to 9.5mm plasterboard suitable for internal masonry walls, sloped rafters and ceilings.
Xtratherm XT/TL-MF Mechanically Fixed Drylining Board is a highly versatile and d..
Provides Effective Vapour Control Layer
Reducing Energy Consumption and Costs
For a Variety of Wall Types - Internal Walls, Sloped Roofs, Ceilings
Insulation & Drylining in one Application - Refurbishment & New Build
XT/TL-MF is only suitable for mechanically fixed applications
24mm Plydeck Xtratherm (PIR with OSB Board) Flat Roof Insulation Decking is a three-in-one solution designed to provide decking, vapour control layer and high levels of thermal insulation in one easy applicable flat roof product.
Xtratherm Plydeck is a composite board of enhanced PIR (polyisocyan..
25mm Black Foil Faced Two Sides Knauf RS45 Slab is a semi rigid rock mineral wool black foil backed on both sides insulation slab with an excellent class A1 fire performance.
Knauf RS45 Black foil backed on both sides slab provides outstanding fire, thermal and acoustic performance for both new b..
25mm Black Foil Faced x2 Sides Knauf RS45 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 45kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (x2 Foil Faced RS45)
Double Sides Black Foil Faced Slab accumulates heat on one side of the slab
25mm Knauf RS60 Black Foil Backed Two Sides Slab is an insulation solution specially designed for concrete soffits, an A1 class non-combustible rock mineral wool slab.
Black foil backed and faced 60kg density insulation slab is less visible than the silver foil which is handy specially during the..
25mm Black Foil Faced x2 Sides Knauf RS60 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 60kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (x2 Foil Faced RS60)
Double Sides Black Foil Faced Slab accumulates heat on one side of the slab
25mm Black Foil Faced Knauf Rocksilk RS45 Insulation Slab is a non-combustible rock mineral wool black foil backed insulation slab with an excellent class A1 fire performance.
Knauf RS45 1200mm x 600mm x 25mm black foil backed slab provides outstanding fire, thermal and acoustic performance for b..
25mm Black Foil Faced Knauf Rocksilk RS45 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 45kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (Foil Faced RS45)
Black Foil Faced Insulation Slab accumulates heat on one side of the board
25mm Aluminium Black Foil Backed Knauf RS60 60kg Slab is a rigid class A1 non-combustible rock mineral wool insulation slab faced with a reinforced black aluminium foil.
The black aluminium foil faced insulation slab accumulates heat on one side of the board, unlike the aluminium silver foil that..
25mm Black Foil Faced Knauf Rocksilk RS60 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 60kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (Foil Faced RS60)
Black Foil Faced Insulation Slab accumulates heat on one side of the board
Knauf RS60 Black Tissue Faced 2 Sides Insulation Slab is a 25mm thick fire and acoustic rock mineral wool insulation slab, used for providing fire resistance and thermal insulation for roofs, concrete car park soffits and similar applications.
Rocksilk RS60 Slab (25mm x 600mm x 1200mm) faced with..
Black Tissue Faced 2 Sides Knauf Rocksilk RS45 Insulation Slab is a 25mm thick rock mineral wool based, class A1 non-combustible insulation slab, used for structural elements such as roofs, concrete car park soffits and similar applications.
The black tissue facings on two sides helps to avoid th..
25mm Black Tissue Faced 2 Sides Knauf RS45 Insulation Slab
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Provides from 30 minutes up to 240 minutes fire protection
Density 45kg/m3 Thermal conductivity (lambda) of 0.035W/mK
Used for structural elements such as concrete car park soffits
25mm Black Tissue Faced Knauf RS45 Insulation Slab is a rock mineral wool based, class A1 non-combustible insulation slab, used for structural elements such as roofs, concrete car park soffits and similar applications.
Rocksilk RS45 is a high-efficiency insulation slab with a certified lambda val..
25mm Black Tissue Faced Knauf Rocksilk RS45 Insulation Slab A1
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Provides from 30 minutes up to 240 minutes fire protection
Density 45kg/m3 Thermal conductivity (lambda) of 0.035W/mK
Used for structural elements such as concrete car park soffits
25mm Foil Faced on Both Sides Rocksilk RS45 Knauf Fire Insulation Slab is a standard density (45kg/m3) non-combustible rock mineral wool two-sided foil-faced slab with a great fire performance (Class A1) suitable for use in multiple applications.
Knauf RS45 1200mm x 600mm x 25mm double sided alum..
FOIL FACED BOTH SIDES Slab - FFx2
Class ‘O’ to the Building Regulations - Euroclass A1
Density: 45kg/m3 - Excellent thermal and acoustic properties
Class 1 Surface Spread of Flame - Non-combustible - Odourless, Rot Proof, Non-Hygroscopic
Durability: do not sustain vermin and will not encourage the growth of fungi, mould or bacteria.
25mm EcoTherm EcoVersal PIR Insulation Board 5 in 1 Solution is a universal multi-purpose fibre free rigid polyisocyanurate insulation core faced with an aluminium foil composite on both sides designed for insulating pitched roofs, floors, walls, ceilings and dormer cheeks.
Ecotherm Eco-Versal 24..
25mm Foil Faced Rocksilk RS100 Knauf Insulation Slab is a high-density (100kg/m3) non-combustible rock mineral wool foil backed rigid insulation slab with a great fire performance classified as Euroclass A1, suitable for use in multiple applications.
Knauf RS100 1200mm x 600mm aluminium foil slab..
25mm Foil Faced Rocksilk RS45 Knauf Insulation Slab is a standard density (45kg/m3) non-combustible rock mineral wool foil backed building slab with a great fire performance classified as Euroclass A1, suitable for use in multiple applications.
Knauf RS45 1200mm x 600mm foil backed slab provides ..
25mm Foil Faced Rocksilk RS60 Knauf Insulation Slab is a medium density (60kg/m3) non-combustible rock mineral wool foil backed building slab with a great fire performance classified as Euroclass A1, suitable for use in multiple applications.
Knauf RS60 1200mm x 600mm aluminium foil insulation sl..
25mm Foil Faced on Both Sides Rocksilk RS100 Knauf Insulation Slab is a high-density (100kg/m3) non-combustible rock mineral wool foil-faced two-sides rigid insulation slab with a great fire performance (Class A1) suitable for use in multiple applications.
Knauf RS100 1200mm x 600mm aluminium foi..
FOIL FACED BOTH SIDES Slab - FFx2
Class ‘0’ to the Building Regulations Euroclass A1
Density: 100kg/m3 Excellent thermal and acoustic properties
Class 1 Surface Spread of Flame Non-combustible
Provides excellent fire, thermal and acoustic performance.
25mm Foil Faced on Both Sides Rocksilk RS60 Knauf Fire Insulation Slab is a medium density (60kg/m3) non-combustible rock mineral wool foil-faced two-sides slab with a great fire performance (Class A1) suitable for use in multiple applications.
Knauf RS60 1200mm x 600mm aluminium foil insulation ..
FOIL FACED BOTH SIDES Slab - FFx2
Class ‘0’ to the Building Regulations - Euroclass A1
Density: 60kg/m3 Excellent thermal and acoustic properties
Class 1 Surface Spread of Flame - Non-combustible
Durability: will not encourage the growth of fungi, mould or bacteria.
25mm Xtratherm FR/ALU Flat Roof PIR Insulation Board Thin-R is a top-class polyisocyanurate foam core insulation board with vapour resistant gas-tight foil facers suitable for loose laid ballasted and mechanically fixed single ply waterproofing systems.
Thin-R FR/ALU is a thermally efficient roof..
BBA Certification No. 11/4817
Vapour resistant foil facers
Loose laid ballasted systems
Thermal Conductivity: 0.022W/mK
Compatible with mechanically fixed single ply systems
25mm Xtratherm Thin-R FR/BGM Flat Roof Insulation Board is a high-quality polyisocyanurate core (PIR) rigid insulation board with bitumen glass fibre and mineral glass facings designed for partially bonded, torched-on and built-up bituminous felt systems.
Thin-R Xtratherm FR/BGM 25mm x 600mm x 12..
BBA Certification No. 11/4878.
Built-up Bituminous Felt Systems
Insulation for Torched-on Systems
Insulation for Partially Bonded Systems
Mechanically Fastened or Loose Laid Ballasted Bituminous Systems
25mm Xtratherm Thin-R FR/MG Flat Roof Insulation is a high-quality polyisocyanurate foam core (PIR) insulation board with mineral coated glass facers designed for use below single ply fully adhered roof membranes, single ply waterproofing systems and partially bonded built-up felt.
Xtratherm Flat..
25mm Kingspan Kooltherm K107 Pitched Roof Insulation Board is an advanced pitched roof insulation board with certified thermal conductivity of 0.019 W/mK across all thicknesses.
K107 Insulation Board is an ideal solution for insulating your roof and can be simply retrofitted when converting an at..
25mm Kingspan Thermaroof TR26 LPC/FM is a high performance PIR insulation board for flat roofs, fully compatible with most mechanically fixed single-ply waterproofing systems and green roof systems.
The Thermaroof® TR26 LPC/FM Boards are manufactured with Nilflam® technology, a high performance r..
25mm Kingspan TR26 Flat Roof PIR Rigid Insulation Board
TR26 Thermal Conductivity (lambda) as low as 0.022W/mK
Compatible with mechanically fixed single-ply waterproofing
High performance PIR Rigid Insulation board for flat roofs
Fully compatible with green roof systems (2400mm x 1200mm)
25mm Kingspan Thermaroof TR27 is a flat roof insulation board used on roofs waterproofed with fully-adhered, single-ply, partially-bonded, built-up felt, mastic asphalt or cold liquid applied waterproofing.
Kingspan TR27 is manufactured to the highest standards offering a thermal conductivity of ..
White Tissue Faced 2 Sides Knauf RS45 Insulation Slab is a 25mm thick rock mineral wool based, class A1 non-combustible insulation slab, used for structural elements such as roofs and concrete car park soffits.
25mm Rocksilk RS45 is a standard density (45kg/m3) insulation slab with a certified th..
25mm White Tissue Faced 2 Sides Knauf RS45 Insulation Slab
From 30 up to 240 minutes fire protection (1200x600x25mm slab)
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Density 45kg/m3 Thermal conductivity (lambda) of 0.035W/mK
Used for structural elements such as concrete car park soffits
25mm Knauf RS60 Black Tissue Faced Insulation Slab is an acoustic rock mineral wool based, class A1 non-combustible insulation slab, used for structural elements such as roofs, concrete car park soffits and similar applications.
Knauf Rocksilk RS60 is a medium density (60kg/m3) insulation slab wi..
Black Tissue Faced Knauf Rocksilk RS60 Insulation Slab A1 (25mm)
Density 60kg/m3 Thermal conductivity (lambda) of 0.034W/mK
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Provides from 30 minutes up to 240 minutes fire protection
Used for structural elements such as concrete car park soffits
25mm Rocksilk RS60 (Rock Mineral Wool Slab) Knauf Insulation Building Slab is a medium density (60kg/m3) non-combustible rock mineral wool unfaced slab designed for use in multiple applications with a great fire performance classified as Euroclass A1, which is the highest fire rating for non-combust..
Class 1 Surface Spread of Flame - Non-combustible
Class ‘O’ to the Building Regulations - Euroclass A1
Density: 60kg/m3 - Excellent thermal and acoustic properties
25mm Rocksilk RS100 Knauf (Rock Mineral Wool) Insulation Building Slab is a high-density (100kg/m3) non-combustible rock mineral wool unfaced rigid slab designed for use in multiple applications with a great fire performance classified as Euroclass A1, which is the highest fire rating for non-combus..
Class 1 Surface Spread of Flame - Non-combustible
Class ‘0’ to the Building Regulations - Euroclass A1
Density: 100kg/m3 Excellent thermal and acoustic properties
25mm Rocksilk RS45 Knauf Rock Mineral Wool Insulation Slab is a standard density (45kg/m3) non-combustible rock mineral wool building slab designed for use in multiple applications with a great fire performance classified as Euroclass A1, which is the highest fire rating for non-combustible material..
Class 1 Surface Spread of Flame - Non-combustible
Class ‘O’ to the Building Regulations - Euroclass A1
Density: 45kg/m3 - Excellent thermal and acoustic properties
25mm Knauf RS100 Insulation Slab Black Tissue Faced One Side is a rigid A1 class, non-combustible fire resistant insulation slab, used for structural elements such as roofs, concrete car park soffits and similar applications.
Knauf Rocksilk RS100 is a high density (100kg/m3) insulation slab with ..
25mm Knauf RS100 Black Tissue Faced 1 Side Insulation Slab A1
High density 100kg/m3 Thermal conductivity (lambda) 0.034W/mK
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Provides from 30 minutes up to 240 minutes fire protection
Used for structural elements such as concrete car park soffits
White Tissue Faced 1 Side Knauf RS100 Insulation Board 25mm is a rigid fire, thermal and acoustic class A1 insulation slab, used for structural elements such as roofs, concrete soffits and similar applications.
Rocksilk RS100 is a high density (100kg/m3) insulation slab with a certified thermal c..
25mm Knauf RS100 White Tissue Faced 1 Side Insulation Slab - 100kg
From 30 up to 240 minutes fire protection (1200x600x25mm slab)
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Density 100kg/m3 Thermal conductivity (lambda) of 0.034W/mK
Used for structural elements such as concrete car park soffits
25mm White Tissue Faced 1 Side Knauf RS45 Insulation Slab is a rock mineral wool based, class A1 non-combustible insulation slab, used for structural elements such as roofs, concrete car park soffits and similar applications.
The white tissue facing on one side helps to avoid the slab edges from ..
White Tissue Faced Knauf RS45 Insulation Slab 25x600x1200mm
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Provides from 30 minutes up to 240 minutes fire protection
Density 45kg/m3 Thermal conductivity (lambda) of 0.035W/mK
Used for structural elements such as concrete car park soffits
25mm Rockwool RW3 Acoustic Insulation Slab (Prorox SL930) is a robust, medium-density (60kg/m3) non-combustible resin bonded semi-rigid fire resistant insulation slab designed for use in floors, roofs at rafter level, partitions, ceilings, timber and steel frame walls.
Using RW3 Insulation in cei..
RW3 is rated Euroclass A1 non-combustible
Excellent thermal, acoustic and fire performance
RW3 insulation slabs achieve Lambda 0.034W/mK
RW3 is a robust insulation solution for a range of general building applications
Durable insulation solution which will maintain high performance over the lifetime of the building
25mm Rockwool RW5 Slab Acoustic, Fire and Thermal Insulation (Prorox SL960) is a strong, high-density (100kg/m3) non-combustible resin bonded rigid fire resistant insulation slab designed for use in floors, roofs at rafter level, partitions, ceilings, timber and steel frame walls.
Using Rockwool ..
RW5 is rated Euroclass A1 non-combustible
Excellent thermal, Acoustic (100kg density) and fire performance
25mm Rockwool RWA45 Acoustic Insulation Slab (Prorox SL920) is a robust, standard density (45kg/m3) non-combustible resin bonded semi-rigid fire resistant insulation slab designed for use in floors, roofs at rafter level, partitions, ceilings, steel and timber frame walls.
Using RWA45 Acoustic In..
RWA45 is rated Euroclass A1 non-combustible
Excellent thermal, acoustic and fire performance
RWA45 insulation slabs achieve Lambda 0.035W/mK
RWA45 is a robust insulation solution for a range of general building applications
Durable insulation solution which will maintain high performance over the lifetime of the building
25mm Xtratherm Safe-R SR/PR Pitched Roof Insulation Board is a high-class rigid phenolic foam insulation board with a low emissivity foil facings designed for pitched roofs, sloped roofs, ventilated roofs, hybrid roofs and warm roofs.
Xtratherm SR/PR range is a BBA certified high-efficiency therm..
BBA Certification No. 10/4803
Thermal Conductivity: 0.021W/mK
Reaction to Fire Euroclass B-s1, d0
Reduced Thermal Bridging and Risk of Condensation
Lightweight and Easy to Install - Superior Performance Phenolic Insulation
25mm Unilin FR/ALU Thin-R Flat Roof Insulation Board comprising a rigid polyisocyanurate (PIR) insulation board with a composite gas-tight foil facings on both sides.
Flat Roof Board FR/ALU is used as a thermal insulation and to create or improve falls on limited access concrete, timber or metal ..
25mm Unilin FR/ALU Thin-R Flat Roof PIR Insulation Board
Rigid PIR Insulation Board with a gas-tight foil facings on both sides
Used as a thermal insulation on timber or metal flat roof decks
High Performance Board used in conjunction with a vapour control layer
Used with a single-ply mechanically fixed roof waterproofing membrane
The 25mm Unilin Thin-R FR/BGM Flat Roof Insulation Board is faced with a polypropylene fleece finished bitumen glass-fibre working surface and a mineral glass facing to the underside.
FR/BGM boards are suitable for use with most bitumen based, partially bonded waterproofing systems typically incl..
Unilin FR/BGM Flat Roof Insulation Board 25mm x 600mm x 1200mm
Faced with a polypropylene fleece finished bitumen glass-fibre working surface
Faced with a mineral glass facing to the underside insulation board surface
Used for partially bonded torched-on built-up bituminous felt systems
Can be used as a cheaper alternative to Celotex and Kingspan TR24 Insulation
25mm Unilin Flat Roof FR/MG is a high performance Polyisocyanurate with mineral coated glass facers suitable for use below single ply waterproofing systems and partially bonded built-up felt.
FR/MG Insulation Board for use as a thermal insulation layer and to create or improve falls on limited ac..
25mm x 600mm x 1200mm Unilin FR/MG Flat Roof Insulation Board
High Performance PIR Insulation Board with mineral coated glass facers
For concrete, timber or metal flat roof decks in domestic and non-domestic buildings
Used below single ply waterproofing systems and partially bonded built-up felt
Can be used as a cheaper alternative to Celotex and Kingspan Therma Roof Insulation
25mm Unilin SR/PR Safe-R, a rigid phenolic foam insulation board with a composite foil-facing on both sides, for use in warm pitched roofs in new and existing domestic and non-domestic buildings.
Safe-R Pitched Roof Unilin SR/PR on sloped roofs (ventilated, hybrid or warm roofs) provides the most..
25mm Unilin Xtroliner XO/PR is a warm roof construction board, comprising a rigid foam modified Polyisocyanurate (PIR) core with robust textured low emissivity aluminium foil facings.
Using XO/PR used above or between the roof rafters ensures that the structure is kept at or near the internal env..
25mm Unilin XO/PR XtroLiner Pitched Warm Roof PIR Insulation Board
Used above or between the rafters reducing thermal stress and condensation risk
Rigid foam modified Polyisocyanurate (PIR) core with textured robust facings
Lambda (thermal conductivity) of 0.021 W/mK and Euroclass C s2 d0 fire classification
Used on ventilated, hybrid or warm and sloped roofs to achieve most efficient U-values
25mm Knauf RS60 White Tissue Faced 2 Sides Insulation Slab is a robust A1 non-combustible slab, used as a fire, thermal and acoustic insulation for structural elements such as roofs and concrete car park soffits.
Rocksilk RS60 is a medium density (60kg/m3) insulation slab with a certified thermal..
25mm XtroDeck XO/XD Unilin is faced with an embossed aluminum facing on both sides high performance flat roof board used for partially bonded, self adhered built-up bituminous felt roof systems.
Flat Roof Insulation XO/XD is manufactured to EN 13165 by Unilin Insulation with a declared lambda (th..
25mm Unilin Xtroliner XtroDeck XO/XD Flat Roof PIR Insulation Board
Premium Rigid PIR Insulation Board with an embossed aluminum facings
Used for partially bonded, self adhered built-up bituminous felt roof systems
Lambda (thermal conductivity) of 0.021 W/mK and Euroclass C s2 d0 fire classification
Unilin XtroDeck XO/XD flat roof insulation board may also be fully bonded
27mm Structural Insulated Panel (SIP) is a high performance construction board consisting of an insulating 15mm Xtratherm PIR foil faced foam core sandwiched between two 6mm structural plywood facings that is used in floors, walls and roofs.
SIPs are made of Xtratherm polyisocyanurate (PIR) core ..
Tapered Roof Unilin TR/ALU 30-50mm is the tapered version of Flat Roof FR/ALU, it is faced on both sides with composite gas tight foil facings bonded to a Polyisocyanurate (PIR) core during manufacture.
Unilin TR/ALU Tapered Roof systems address most flat roof failures i.e. ponding of rainwater c..
30-50mm Unilin TR/BGM (Torch-on) is a high performance PIR tapered roof insulation with a polypropylene fleece finished bitumen/glass fibre working surface and a mineral glass facing to the underside.
Unilin TR/BGM boards are not reversible, they are suitable for use below most bitumen based part..
30-50mm Unilin Tapered Roof TR/MG is a high performance PIR with mineral coated glass facers used below single ply fully adhered roof membranes, waterproofing systems and partially bonded built-up felt.
Unilin TR/MG tapered roof insulation boards are embedded in a layer of bitumen on a 3G type fe..
The 30mm Knauf RS140 is a rock mineral wool insulation slab with an excellent class A1 fire rating to BS EN 13501-1 used in multiple thermal and acoustic applications where 140kg/m3 density is critical.
RS140 Rocksilk is manufactured with a density of 140kg/m3, designed for use in a variety of ap..
30mm x 600mm x 1200mm Knauf Rocksilk RS140 (140kg/m3)
Class A1 Non-combustible Rigid Rock Mineral Wool Insulation Slab
Fire, thermal and acoustic insulation slab used for building applications
Manufactured in 140kg density per m3 - Class ‘0’ to Building Regulations
Used in floors, roofs at rafter level, partitions, ceiling, timber & steel frame
30mm Rockwool RW6 (140kg) is a rigid class A1 non-combustible resin bonded insulation slab with an excellent fire, thermal and acoustic properties used for a wide range of building applications.
Rockwool RW6 Slab is manufactured in 140kg density per cubic meter (140kg/m3), specially designed for ..
30mm x 600mm x 1200mm Rockwool RW6 (140kg density) Class A1
Non-combustible resin bonded Rigid Stone Wool Insulation Slab RW6
Fire, thermal and acoustic slab used for a wide range of building applications
Manufactured in 140kg density per m3 - Class ‘0’ to Building Regulations
Used in floors, roofs at rafter level, partitions, ceilings, timber and steel frame walls
30mm Foil Faced 2 Sides Rockwool RW6 (140kg) is a foil faced and backed class A1 insulation slab with an excellent fire, thermal and acoustic properties used for a wide range of building applications.
Foil Faced Two Sides (FFx2) Rockwool RW6 30x600x1200mm fire performance integrity is 240 minutes..
30mm x 600mm x 1200mm Foil Faced x2 Sides Rockwool RW6 (140kg/m3)
Class A1 Non-combustible Rigid Stone Wool Insulation Slab Rockwool RW6
Fire, thermal and acoustic slab used for a wide range of building applications
Manufactured in 140kg density per m3 - Class ‘0’ to Building Regulations
Used in soffits, floors, roofs at rafter level, partitions, ceilings, walls
30mm Foil Faced Rockwool RW6 (140kg) is a foil backed class A1 non-combustible insulation slab with an excellent fire, thermal and acoustic properties used for a wide range of building applications.
Rockwool RW6 Foil Faced x1 Side Slab 30x600x1200mm fire performance integrity is 240 minutes, and ..
30x600x1200mm Foil Faced x1 Side Rockwool RW6 (140kg density m3)
Class A1 Non-combustible Rigid Stone Wool Insulation Slab Rockwool RW6
Fire, thermal and acoustic slab used for a wide range of building applications
Manufactured in 140kg density per m3 - Class ‘0’ to Building Regulations
Used in soffits, floors, roofs at rafter level, partitions, ceilings, walls
30mm Terrawool TW50 Acoustic Insulation Slab is a standard density (50kg/m3) non-combustible thermal and acoustic stone wool insulation slab used to insulate the floors, internal partition walls and separating wall applications.
Terrawool TW50 Insulation Slab 30mm is a high-performance recyclable..
33mm Structural Insulated Panel OSB SIPs is a special construction board consisting of an insulating 15mm Xtratherm PIR foil faced foam core sandwiched between two 9mm Oriented Strand Board facings that is used in floors, walls and roofs.
OSB SIP Panel 33mm is made of Xtratherm polyisocyanurate (..
36mm Soffit Liner Insulation Board (30mm RWA45 & 6mm Promat Masterboard) is an A1 class non-combustible soffit liner board that provides effective fire resistance, acoustic and thermal insulation for concrete soffits.
Soffit Liner Boards are manufactured using high performing, non-combustible Roc..
36mm Soffit Liner Insulation Board A1 Class Non-combustible
30mm Rockwool RWA45 bonded to 6mm Masterboard Promat
Up to 180 min Fire Protection - Easy to decorate with paints, wallpapers or tiles
Increased impact resistance and durability in addition to improved fire safety
Effective fire resistance, acoustic and thermal insulation for concrete soffits
36mm Soffit Liner is made up of 30mm Rockwool RW5 bonded to 6mm Promat Masterboard to provide effective fire resistance, acoustic and thermal insulation for concrete soffits.
Soffit Liner Boards are manufactured using non-combustible Rockwool RW5 insulation slab faced with 6mm Promat Masterboard ..
36mm Soffit Liner Insulation Board A1 Class Non-combustible
30mm Rockwool RW5 bonded to 6mm Masterboard Promat
Up to 180 min Fire Protection - Easy to decorate with paints, wallpapers or tiles
Increased impact resistance and durability in addition to improved fire safety
Effective fire resistance, acoustic and thermal insulation for concrete soffits
37.5mm Unilin Safe-R SR/TB-MF is an insulated plasterboard made of phenolic core between foil facings bonded to 12.5mm plasterboard used for dry lining internal walls, sloped roofs and ceilings.
Foil facing on both sides of SR/TB-MF incorporates an integral vapour control layer, which helps to re..
42mm Soffit Liner Insulated Board (30mm RWA45 & 12mm Masterboard) is a high-quality A1 class soffit liner board used to provide effective fire resistance, acoustic and thermal insulation for concrete soffits.
Soffit Liner Boards are manufactured using non-combustible Rockwool RWA45 insulation sla..
42mm Soffit Liner Insulation Board A1 Class Non-combustible
30mm Rockwool RWA45 bonded to 12mm Masterboard Promat
Up to 180 min Fire Protection - Easy to decorate with paints, wallpapers or tiles
Increased impact resistance and durability in addition to improved fire safety
Effective fire resistance, acoustic and thermal insulation for concrete soffits
43mm Structural Insulated Panel EPS and OSB SIPs is a construction board consisting of an insulating 25mm EPS70 Expanded Polystyrene Kay-Metzeler insulation core sandwiched between two 9mm Oriented Strand Board facings that is used in floors, walls and roofs.
EPS SIP Panel 43mm is made of closed ..
EPS SIP High-quality Construction Board
Closed cell standard polystyrene insulation core
Structural Insulated Panel EPS and OSB SIPs
Strong, energy efficient and cost effective solution
50mm Foil Faced Two Sides Rockwool RW4 is used to prevent the spread of flames, heat, smoke and fire through concealed spaces in buildings, a rigid class A1 non-combustible resin bonded insulation slab.
Rockwool RW4 Foil Faced 2 Sides Slab 50mm x 600mm x 1200mm fire performance integrity is 240 m..
Foil Faced x2 Sides Rockwool RW4 (80kg/m3) A1 Class 1200x600x50mm
Non-combustible resin bonded Rigid Stone Wool Insulation Slab RW4 (FFx2)
Fire, thermal and acoustic slab used for a wide range of building applications
Manufactured in 80kg density per m3 - Class ‘0’ to Building Regulations (FFx2)
Fire performance integrity is 240 minutes, and 60 minutes for the insulation core
50mm Foil Faced Rockwool RW4 is used to prevent the spread of flames, heat, smoke and fire through concealed spaces in buildings, a rigid class A1 non-combustible resin bonded insulation slab.
Rockwool RW4 Foil Faced Slab 50mm x 600mm x 1200mm fire performance integrity is 240 minutes, and 60 min..
Foil Faced x1 Side Rockwool RW4 (80kg/m3) A1 Class 1200x600x50mm
Non-combustible resin bonded Rigid Stone Wool Insulation Slab RW4
Fire, thermal and acoustic slab used for a wide range of building applications
Manufactured in 80kg density per m3 - Class ‘0’ to Building Regulations
Fire performance integrity is 240 minutes, and 60 minutes for the insulation core
50mm Kingspan Thermaroof TR24 Flat Roof PIR Insulation Board is a high performance rigid insulation board for flat roofs, compatible with the majority of torch-applied waterproofing systems for both new build and refurbishment projects.
The core of Kingspan Thermaroof® TR24 is manufactured with N..
50mm Knauf Rocksilk Flexible Insulation Slab is a functional thermal and acoustic multi-purpose rock mineral wool insulation slab which can be used to insulate a wide range of applications on site such as timber and metal stud partitions, timber frame walls and suspended timber floors.
Knauf Flex..
50mm Rockwool RW4 (80kg) is a robust, class A1 non-combustible resin bonded rigid insulation slab with an excellent fire, thermal and acoustic properties used for a wide range of building applications.
Rockwool Stone Wool Insulation Slab if correctly installed exceeds the minimum requirements of ..
50mm x 600mm x 1200mm Rockwool RW4 (80kg density) Class A1
Non-combustible resin bonded Rigid Stone Wool Insulation Slab RW4
Fire, thermal and acoustic slab used for a wide range of building applications
Manufactured in 80kg density per m3 - Class ‘0’ to Building Regulations
Used in floors, roofs at rafter level, partitions, ceilings, timber and steel frame walls
50mm Unilin XO/SK XtroLiner Sarking (T&G) is an engineered tongue and grooved external roof insulation system with robust facings which meets the passive U-Value of 0.15 W/m2K.
The XtroLiner Sarking XO/SK offers a robust continuous layer of insulation, minimising the threat of Thermal Bridging an..
50mm Unilin XO/SK XtroLiner Sarking Warm Roof Construction Board (T&G)
XO/SK used over the rafters to meet the passive U-Value of 0.15 W/m2K
Unilin XO/SK engineered tongue and grooved external roof insulation system
Rigid foam modified Polyisocyanurate (PIR) core with textured robust facings
Lambda (thermal conductivity) of 0.021 W/mK and Euroclass C s2 d0 fire class
50mm XO/SK Xtratherm Xtroliner Warm Pitched Roof Insulation is an improved performance PIR (polyisocyanurate) engineered tongue and grooved insulation board with robust textured foil facings designed for use in warm roof construction systems.
Xtratherm Xtroliner XO/SK 50mm is a premium external r..
56mm Kingspan Thermaroof TR31 Structural Plywood Insulation for Flat Roof Decking is a high-quality 50mm PIR insulation board bonded to 6mm FSC certified plywood on one side and multilayer foil on the reverse side.
Kingspan TR31 Composite Structural Flat Roof PIR Board is a 3 in 1 solution desig..
5mm Isocheck Impacta Pads are acoustic and soundproofing isolation pads used for creating isolation of flanking noise elements, for example, where kitchen units are connected to walls.
This common connection encourages impact/structure-borne sound transmission to travel from the units up/down t..
5mm Isocheck Impacta Pads Acoustic and Soundproofing Isolation
Used for creating isolation of flanking noise elements
For example, where kitchen units are connected to walls
Under bath feet, toilet, shower and all other bathroom and kitchen fittings
Complete sound reduction flooring system (Approved Document E 2003)
96mm Celotex TD4000 (TD4096) PIR Insulated Plywood Flat Roof Board is a 3 in 1 product designed to provide decking, vapour control layer and insulation for new and refurbishment flat roof applications.
Celotex TD4000 provides a quick and easy way to achieve effective thermally insulated flat roof..
96mm EcoTherm Eco-Deck Pre-Insulated Structural Flat Roof Decking is a solid high-quality PIR (polyisocyanurate) insulation board bonded to 6mm plywood on one side and multilayer foil on reverse side designed to deck and insulate in one simple application on new roofs or upgrading the thermal perfor..
96mm Recticel Plylok PIR Warm Flat Roof Insulation Board is a 3 in 1 solution to provide decking, vapour control layer and insulation in one application for use in warm flat roofs under traditional bituminous waterproofing and single-ply waterproofing membranes in new build and refurbishment flat ro..
25mm Knauf Rocksilk RS100 (100kg) Black Tissue Faced 2 Sides Insulation Slab is a strong and durable class A1 non-combustible rock mineral wool insulation slab, used for structural elements such as roofs and concrete car park soffits.
Knauf Rocksilk RS100 is an ultimate (100kg per cubic metre den..
25mm Knauf RS100 Black Tissue Faced Two Sides Insulation Slab
Density 100kg/m3 Thermal conductivity (lambda) of 0.034W/mK
Provides from 30 minutes up to 240 minutes fire protection
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Used for structural elements such as concrete car park soffits
Damp Proof Membrane DPM 1200 gauge (100m²) is a black membrane material used within solid concrete floors to prevent the rise of moisture or damp through structure flooring and for most construction damp proofing requirements.
The DPM can be used as either below the slab application, directly bel..
Damp Proof Membrane DPM 1200 gauge
4m wide by 25m long - 100m² roll coverage
For solid concrete floors to prevent the rise of moisture or damp
Suitable for most construction damp proofing requirements
Damp Proof Membrane manufactured from recycled polythene
25mm White Tissue Faced Two Sides Knauf Rocksilk RS100 Slab is a strong rock mineral wool based, class A1 insulation slab, used for structural elements such as roofs, concrete soffits and similar applications.
The white tissue facings on both sides helps to avoid the slab edges from showing as sh..
25mm Knauf RS100 White Tissue Faced 2 Sides Insulation Slab
From 30 up to 240 minutes fire protection (1200x600x25mm)
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Density 100kg/m3 Thermal conductivity (lambda) of 0.034W/mK
Used for structural elements such as concrete car park soffits
Novia Black 115gsm Roof and Wall Breather Membrane is a top-class three layer laminate suitable for pitched cold and warm roofs and insulated wall applications.
This Breather Membrane is a functional low-cost product that allows water vapour to escape, but stops larger water droplets from getting..
Superior water resistance - Highly vapour permeable
Standard grade 3 layer laminate 115 gsm membrane
Single product for all roofs and walls - Grade E (fire)
CE compliant to EN 13859-1 (roofs) and EN 13859-2 (walls)
Microporous core - Recyclable and ecologically harmless
Novia Reflex is a highly-durable tri-laminate low emissivity metallised reflective breather membrane suitable for pitched cold and warm roofs and insulated wall applications.
The product has outstanding water resistance characteristics but still provides excellent breathability.
Novia Reflex ..
Single product for all roofs and walls
Maximum waterproofing properties – EN 1928 W1
A high quality, versatile low cost reflective breather membrane
CE compliant to EN 13859-1 (roofs) and EN 13859-2 (walls)
Tri-laminate membrane with low emissivity and high reflectivity
Novia Ultra+ 95gsm is a cost-effective three-layer laminate Breather Membrane designed for use in pitched cold and warm roofs and insulated wall applications with excellent water resistance and high breathability.
Novia Ultra+ 95gsm is a tough material providing good tensile and nail tear strengt..
Entry grade 3 layer laminate 95gsm membrane
EN 13859-1 for pitched roofing and EN 13859-2 for walls
Grey on one side and white on the other, with a 150 mm overlap line
Install as per BS 5534:2014 + A2: 2018 UV guidance
25mm White Tissue Faced One Side Rocksilk RS60 Slab is an acoustic rock mineral wool based, class A1 non-combustible insulation slab, used for roofs, concrete car park soffits and similar applications.
The white tissue facing on one side helps to avoid the slab edges from showing as shadows throu..
25mm White Tissue Faced 1 Side Knauf RS60 60kg Insulation Slab
From 30 up to 240 minutes fire protection (1200x600x25mm slab)
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Density 60kg/m3 Thermal conductivity (lambda) of 0.034W/mK
Used for structural elements such as concrete car park soffits
Novia RoofReflex Insulated Breather Membrane (AluThermo) is a low emissivity wrap bonded to a high quality recycled insulation material that reduces overheating in summer by providing a cooling effect and lowers air-conditioning costs.
RoofReflex is an insulated roof and wall underlay membrane th..
Aluthermo RoofReflex - Ten-year warranty
CE-marked to EN 13859-1 and EN 13859-2
Adds up to 1.47 m²K/W in thermal resistance (R-value)
Low emissivity external face - Improved acoustic values
Reduces thermal bridge losses - EPC-approved and LABC-approved
37mm Structural Insulated Panel EPS and Ply SIP is a special building board consisting of an insulating 25mm EPS70 Expanded Polystyrene Kay-Metzeler insulation core sandwiched between two 6mm structural plywood facings that is used in floors, walls and roofs.
EPS Ply SIP Panel 37mm is made of clo..
EPS Ply SIP High-quality Construction Board
2400mm x 1200mm square edge boards 8x4
Structural Insulated Panel EPS and Plywood SIPs
Strong, energy efficient and cost effective solution
Closed cell standard expanded polystyrene insulation core
106mm Celotex TD4000 (TD4096) PIR Insulated Plywood Flat Roof Board is a 3 in 1 product designed to provide decking, vapour control layer and insulation for new and refurbishment flat roof applications.
Celotex TD4000 2400mm x 1200mm provides a quick and easy way to achieve effective thermally in..
106mm EcoTherm Eco-Deck Pre-Insulated Structural Flat Roof Decking is a solid high-quality PIR (polyisocyanurate) insulation board bonded to 6mm plywood on one side and multilayer foil on reverse side designed to deck and insulate in one simple application on new roofs or upgrading the thermal perfo..
112mm Damp Proof Course DPC 500mu (30m roll) is a standard 112mm wide damp proofing barrier that is used to prevent rising damp, moving water up a walls and associated problems.
DPC provides damp proof protection, preventing ingress of external moisture and stopping damp rising up the walls.
T..
112mm Damp Proof Course DPC 500mu (30m roll)
Prevent rising damp, moving water up a walls
Suitable for brick, block, stone or concrete walls
Can be used for vertical and horizontal applications
116mm Recticel Plylok PIR Warm Flat Roof Insulation Board is a 3 in 1 solution to provide decking, vapour control layer and insulation in one application for use in warm flat roofs under traditional bituminous waterproofing and single-ply waterproofing membranes in new build and refurbishment flat r..
125mm Unilin ECO360 Roof PIR Board, a rigid foam bio-enhanced PIR core with textured robust low emissivity foil facings, used for sloped roofs (ventilated, hybrid or warm).
Using pioneering environmentally conscious technology, ECO360 MA in roof applications will reduce heat loss while also deliv..
125mm Unilin ECO/MA 360 Bio-enhanced Roof PIR Insulation Board
High performance - Thermal conductivity (lambda value) of 0.020 W/mK
Unilin ECO360 Roofs meets U-Values specified in the Building Regulations
RIBA/RIAI Climate Challenge 2030, LETI Standards, Future Homes Hub targets
Bio-enhanced board will significantly improve the U-Value of new and existing roofs
125mm Unilin ECO360 (Sarking) Pitched Roof PIR Board, a rigid foam bio-enhanced polyisocyanurate (PIR) core with textured robust low emissivity foil facings, suitable for pitched roofs.
Unilin Sarking Warm Roof Construction Board has the strength and thermal properties required to reach the high ..
165mm Helical Flat Roof Nail Warm Roof Fixing is a high performance, self-tapping, zinc plated nail designed for a quick installation and securing structural 6mm Plywood or 9mm OSB composite insulation panels.
Helical Warm Roof Nails are a quick and reliable fixing method for energy efficient war..
20mm Unilin XT/PR Thin-R Pitched Roof PIR Insulation Board is a rigid thermal foam insulation board used in roof construction, designed to achieve Future Home and Passive House Standards.
XT/PR PIR Board 20mm is a high performance foil faced insulation foam board with a certified thermal conducti..
20mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
20mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
20mm Unilin PIR Insulation Board XT/TF Timber Frame is used between studs or as an insulating sheathing material for steel and timber framing wall applications.
XT/TF Unilin PIR Board is a high performance foil faced rigid insulation foam with a certified thermal conductivity of 0.022W/mK which h..
20mm Unilin XT/UF Thin-R Floor Insulation Board is a rigid thermal foam insulation board used in floor construction, designed to achieve Future Home and Passive House Standards.
XT/UF Underfloor Unilin PIR Board is a high performance insulation with a certified thermal conductivity of 0.022W/mK w..
20mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
20mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
20mm Xtratherm PIR Thin-R Insulation Board (2400mm x 1200mm x 20mm) is a rigid foil faced polyisocyanurate (PIR) thermal foam insulation board designed for roofs, walls, floors, timber and steel framed systems.
Xtratherm Thin-R range is a high-efficiency foil faced PIR insulation with a certified..
Kingspan ThermaFloor TF70 Floor Board 25mm is a rigid thermoset foam insulation board used to insulate solid concrete, suspended ground floors and for use with underfloor heating systems.
Thermafloor TF70 Kingspan is a high performance flooring insulation suitable for use below the screed, in blo..
Thermal conductivity of 0.022 W/mK
Easy to handle and install
BBA Certificate 14/5133
NSAI Agrément Certificate 03/0196
INSULATION FOR SOLID CONCRETE AND SUSPENDED GROUND FLOORS
25mm Kingspan ThermaPitch TP10 PIR Insulation Board is a foil faced on both sides PIR fibre-free rigid thermoset foam insulation board used for under rafter or between and over joist applications.
Thermapitch TP10 Kingspan PIR 2400mm x 1200mm board is a high performance insulation suitable for ti..
25mm Kingspan Thermapitch TP10 Pitched Roof Board
Easy to handle and install - BBA Certificate 14/5133
Certified thermal conductivity of 0.022 W/mK
NSAI Agrément Certificate 03/0196
INSULATION FOR TILED OR SLATED PITCHED WARM ROOF SPACES
25mm Kingspan Thermawall TW55 PIR Insulation Board is an advanced PIR rigid foam insulation board used between studs or as an insulating sheathing material for steel and timber framing wall applications.
Thermawall TW55 Kingspan PIR 2400mm x 1200mm x 25mm is a high performance insulation board su..
26mm Xtratherm FR/TP Thin-R Thermal Ply Composite Board for Flat Roof is an insulated panel consist of PIR (polyisocyanurate) core with a composite foil facings, bonded to 6mm WBP grade plywood designed for new and refurbishment flat roofs.
FR/TP PIR and Plywood For Flat Roof is a three-in-one so..
26mm Unilin FR/TP Flat Roof Insulation Decking is a high performance insulated panel made of 20mm Unilin PIR insulation bonded to 6mm plywood used for new and refurbishment flat roof applications.
Unilin FR/TP Thermal Ply Flat Roof Insulation Board is faced to the under side with a gas-tight foil..
26mm Unilin FR/TP Warm Roof PIR Ply Insulation Board Decking
Used for new build and refurbishment flat roof applications
Creates a continuous Vapour Control Layer (Vapour Barrier)
PIR foam insulation core and 6mm plywood insulated decking
Unilin FR/TP Thermal ply flat roof insulation over joists board
27.5mm Xtratherm Thin-R XT/TL-MF is an insulated board combined of PIR rigid insulation foam core bonded to 12.5mm plasterboard designed to provide high levels of thermal insulation for internal masonry walls, sloped rafters and ceilings.
Xtratherm XT/TL-MF Mechanically Fixed Drylining Board is a..
Provides Effective Vapour Control Layer
Reducing Energy Consumption and Costs
For a Variety of Wall Types - Internal Walls, Sloped Roofs, Ceilings
Insulation & Drylining in one Application - Refurbishment & New Build
XT/TL-MF is only suitable for mechanically fixed applications
29mm Plydeck Xtratherm (PIR with OSB Board) Flat Roof Insulation Decking is a three-in-one solution designed to provide decking, vapour control layer and high levels of thermal insulation in one easy applicable flat roof product.
Xtratherm Plydeck is a composite board of enhanced PIR (polyisocyan..
30mm Black Foil Faced RS45 Knauf is a composite black foil faced on one side non-combustible rock mineral wool insulation slab with an excellent class A1 fire performance.
Knauf RS45 1200mm x 600mm x 30mm black foil backed slab provides outstanding fire, thermal and acoustic performance for both ..
30mm Black Foil Faced Knauf Rocksilk RS45 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 45kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (Foil Faced RS45)
Black Foil Faced Insulation Slab accumulates heat on one side of the board
30mm Black Foil Faced 2 Sides RS45 Knauf is a composite black foil faced on both sides non-combustible mineral wool insulation slab with an excellent class A1 fire performance.
Knauf RS45 Black foil backed on both sides slab provides outstanding fire, thermal and acoustic performance for both new..
30mm Black Foil Faced x2 Sides Knauf RS45 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 45kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (x2 Foil Faced RS45)
Double Sides Black Foil Faced Slab accumulates heat on one side of the slab