Menu
Your Cart

125mm Unilin ECO/MA360 Sarking Warm Roof PIR Board (pack of 3)

125mm Unilin ECO/MA360 Sarking Warm Roof PIR Board (pack of 3)
125mm Unilin ECO/MA360 Sarking Warm Roof PIR Board (pack of 3)
125mm Unilin ECO/MA360 Sarking Warm Roof PIR Board (pack of 3)
125mm Unilin ECO/MA360 Sarking Warm Roof PIR Board (pack of 3)
125mm Unilin ECO/MA360 Sarking Warm Roof PIR Board (pack of 3)
125mm Unilin ECO/MA360 Sarking Warm Roof PIR Board (pack of 3)
125mm Unilin ECO/MA360 Sarking Warm Roof PIR Board (pack of 3)
  • 125mm Unilin ECO/MA 360 Bio-enhanced Roof Insulation (SARKING)
  • High performance - Thermal conductivity (lambda value) of 0.020 W/mK
  • Unilin ECO360 Sarking meets U-Values specified in the Building Regulations
  • RIBA/RIAI Climate Challenge 2030, LETI Standards, Future Homes Hub targets
  • Bio-enhanced board will significantly improve the U-Value of new and existing roofs
Estimated delivery:
In Stock
£ 635.88
Ex VAT: £ 529.90
  • Brand: Unilin Insulation (UK) known as Xtratherm
  • Model: 125mm Unilin ECO Sarking
  • Weight: 30.00kg
  • Dimensions: 2,400mm x 1,200mm x 125mm
  • SKU: 125mm Unilin ECO Sarking
  • Product code: P1-3355
  • MPN: 125mm Unilin ECO Sarking

Options available

125mm Unilin ECO360 (Sarking) Pitched Roof PIR Board, a rigid foam bio-enhanced polyisocyanurate (PIR) core with textured robust low emissivity foil facings, suitable for pitched roofs.

Unilin Sarking Warm Roof Construction Board has the strength and thermal properties required to reach the high performance U-Values specified in the Building Regulations.

Using pioneering environmentally conscious technology, ECO360 in pitched roof applications will reduce heat loss while also delivering excellent thermal bridging details.

It is lightweight, easy to install and combines high compressive strength with low thermal conductivity, providing a high performance solution for pitched roof insulation.

ECO360 MA Bio Enhanced Insulation for sarking warm roofs offers excellent insulation performance with a thermal conductivity (lambda value) of 0.020 W/mK.

Detailing with breather membranes and vapour control membranes can be more accurately achieved with insulation in a single plane.

Adding an additional layer of Unilin ECO/MA between the counter battens minimises fixing length and improves the overall U-Value of the roof.

This bio-enhanced insulation will significantly improve the U-Value of new and existing roofs.

The product packaging is biodegradable and the overall content has been reduced significantly.

Unilin ECO360 Sarking Roof Board offers a bio-enhanced formulation which is halogen free.

ECO360 is a part of a design solution to achieve RIBA/RIAI Climate Challenge 2030, LETI Standards and the Future Homes Hub targets.

 

Specification:

 

Thickness: 125mm

Width: 1200mm

Length: 2400mm

Size: 125mm x 1200mm x 2400mm

Board Coverage: 2.88m2

Pack Coverage: 8.64m2

Profile: Square Edge

R-Value: 6.25m2K/W

Thermal Conductivity: 0.020 W/mK

Reaction to Fire: NPD

Compressive Strength: >150 (kPa)

 

Unilin ECO360 Sarking Warm Roof Construction Features:

 · Halogen free.

 · Suitable for warm roofs.

 · Biodegradable packaging.

 · High compressive strength.

 · Suitable for pitched roofs.

 · Suitable for sarking roof construction.

 · Bio-enhanced PIR rigid foam insulation.

 · Achieve RIBA/RIAI Climate Challenge 2030

 · Enhanced performance lambda as low as 0.020 W/mK.

 · Improves the U-Value of new and existing roofs.

 · Meets U-Values specified in the Building Regulations.

 · Achieve LETI Standards and the Future Homes Hub targets.

 

Unilin ECO/MA (SARKING) Warm Roof Construction Installation Guidelines:

 · Ensure cavity wall insulation has continued to roof height to meet with the roof insulation.

 · Fix a treated timber stop rail to the end of the rafter at the eaves.

 · Lay ECO/MA Sarking over the rafters ensuring the boards are fully engaged and positioned in a staggered pattern.

 · Joints should be fully supported by rafters.

 · Fill any gaps with expanding foam.

 · Use large headed clout nails to hold boards temporarily in place until they are secured by the counter battens.

 · Fix 38mm x 50mm counter battens with approved helical type fixings through the ECO/MA Sarking into the rafter.

 · The amount of fixings is determined by the fixing manufacturer who can also provide wind load calculations.

 · A breathable sarking membrane should be fitted; refer to manufacturer’s Agrément certification.

 · Ventilation may have to be provided subject to that certification and minimises the risk of interstitial condensation forming on the underside of the membrane.

 · Providing an unventilated void under the membrane can improve the thermal performance.

 · Secure 50mm x 25mm tiling battens through the counterbatten and ECO/MA Sarking to the rafter.

 

Certification and standards:

 · BBA Certification No.12/4956.

 · BS EN ISO 9001 Quality Management System.

 · BS EN ISO 14001 Environmental Management System.

 · BS EN 13165.

 

*Further information may be found in our Downloads section.

Fairly easy access to all PDF files.

Datasheet ǀ Declaration of Performance - DoP ǀ BBA Certificate ǀ Installation Guide ǀ Certificates ǀ Brochure ǀ SPEC Sheet 

*Special Product - Non returnable cancelable.

specification
Board covarage 8.64 m2
Colour Light yellow
Compressive Strength 150 kPa (10% Compression)
Length 2400mm
Material Bio-enhanced PIR Rigid Foam
Pack Coverage 8.64m2
Profile Square Edge
R-Value 0.12 W/m²K
Size 125mm x 1200mm x 2400mm
Thermal Conductivity 0.020 W/mK
Thickness 125mm
Width 1200mm
Fire Classification NPD
Building Regulations Compatible
Coverage 8.64m2
Finish Textured robust low emissivity foil facings
Quantity 3 sheets
Shipping method Articulated Vehicle ǀ Courier
Applications Pitched Warm Roof (Sarking)
BBA Certified Yes
Vapour Control Layer Yes
Fixing method Counter Battens, Rafters, Joists
Foil faced Yes, textured robust low emissivity foil facings
ETA Notification Yes
Features Meets U-Values specified in the Building Regulations
Manufacturer Unilin Insulation®

Write a review

Note: HTML is not translated!
Bad Good

We deliver insulation materials to Mainland UK only. Deliveries to Highlands, Northern Ireland, Isle of Wight etc.. might be possible at additional cost.
We offer free delivery on most of the orders above £300 (excluding VAT) (except special products - shipping cost via courier - products marked ''Request A Quote'')

Delivery of some insulation materials might be extended due to the current situation (Covid-19, stock shortages, allocations).
If you need materials quickly please contact us - we will do our best to help you source materials needed.

We do not deliver on weekends and bank holidays. Sometimes we can deliver on Saturdays - please check with us before placing the order.
If you need any further information please contact us tel. 02081910776

We can help to calculate price per m2 or linear meter (one meter in length) cost, please just contact us via phone 02081910776, email or live chat. Alternatively, you can work it out yourself quickly and easily: to get cost per meter square please divide price shown in orange area by ''Required area (m2)'' Example price of £28.80 divided by board coverage 2.88m2 = cost of £10.00 per m2.

INSTALLERS

No matter whether you choose a local installer or a national company, there’s a few tips to help you find the right installer for your home insulation improvements, such as asking for recommendations and making sure that they’re part of a certification scheme. This makes sure that they have the right skills and standards of workmanship to carry out the installation, and you can be sure that they know exactly what they are doing.

4 TIPS FOR CHOOSING THE BEST INSULATION INSTALLER

1. Thermal inspection picture in portfolio

It’s worth seeing a installer’s previous work. There’s no harm asking if you can see any properties nearby that they’ve installed insulation in. Best way would be to see Infrared Thermal Imaging Inspections. Thermal cameras spot small, but key changes in temperature in different areas of a house, identifying problematic areas that the human eye never could and some that a visual inspection could only hypothesize.

2. Reviews

Along with checking recommendations and previous work, finding reviews online can often be a great way to find out if they provide a good service or not. However, it’s best not to solely rely on reviews you may find or review websites, as there’s no controlling who writes them.

3. Compare prices

Comparing prices will also ensure companies can’t take advantage of you and give you a fair price. 

4. Word of Mouth

The best way to find a great insulation installer is through recommendations. Make sure you ask friends and family. They will most likely give you their honest opinion and can tell you from first hand experience.

 

Whether you require a wall, cladding, external wall, loft or floor insulation fitted, you can find and hire your local insulation installers from popular UK web pages. A simple internet search will return thousands of potential installers near your area.

 

https://www.nia-uk.org/find-an-installer/

https://www.checkatrade.com/

https://www.mybuilder.com/

https://www.ratedpeople.com/local-thermal-insulation

 

STOCKIST

We are the stockist of construction materials and related products for both trade and DIY from most recognizable brands in the UK like Cordek, RCM, Promat, Rockwool, Isover, Celotex, Xtratherm, Ursa, Low-E, Cedral, Kingspan, Dufaylite, British Gypsum, K-rend, Ecotherm, Iko enertherm, Kay-Metzeler, Terrawool to allow you to complete your insulation job on time at competitive prices and the highest standards.

 

Whether you are a large company or a DIYer, if you need a large amount of insulation materials, we can offer quantity discounts at the best prices. Please contact us and our friendly customer service will try to find the best and cheapest solutions for you. We value your time and we will try to deliver the products as soon as possible at a reasonable price to your construction site or house. The UK's leading insulation supplier near you and your needs. Price List available upon request.
125mm Unilin ECO/MA360 Sarking Warm Roof PIR Board (pack of 3)
125mm Unilin ECO/MA360 Sarking Warm Roof PIR Board (pack of 3)
£ 635.88