Menu
Your Cart

110mm Underfloor Heating Board Unilin XO/UF UFH (pack of 3)

110mm Underfloor Heating Board Unilin XO/UF UFH (pack of 3)
110mm Underfloor Heating Board Unilin XO/UF UFH (pack of 3)
110mm Underfloor Heating Board Unilin XO/UF UFH (pack of 3)
110mm Underfloor Heating Board Unilin XO/UF UFH (pack of 3)
110mm Underfloor Heating Board Unilin XO/UF UFH (pack of 3)
110mm Underfloor Heating Board Unilin XO/UF UFH (pack of 3)
110mm Underfloor Heating Board Unilin XO/UF UFH (pack of 3)
110mm Underfloor Heating Board Unilin XO/UF UFH (pack of 3)
110mm Underfloor Heating Board Unilin XO/UF UFH (pack of 3)
  • 110mm Unilin XO/UF Xtroliner Floor Insulation Board Underfloor Heating UFH
  • XO/UF Floorboard is faced with an embossed aluminum foil on both sides
  • Rigid foam modified Polyisocyanurate (PIR) core with textured robust facings
  • Lambda (thermal conductivity) of 0.021 W/mK and Euroclass C s2 d0 fire classification
  • Used for underfloor heating, timber, solid and suspended floors applications
Estimated delivery:
In Stock
£ 485.88
Ex VAT: £ 404.90
  • Brand: Unilin Insulation (UK) known as Xtratherm
  • Model: 110mm Unilin Underfloor XO/UF
  • Weight: 31.00kg
  • Dimensions: 2,400mm x 1,200mm x 110mm
  • SKU: 110mm Unilin Underfloor XO/UF
  • Product code: P1-3406
  • MPN: 110mm Unilin Underfloor XO/UF

Options available

110mm Unilin XO/UF Floorboard, comprising a rigid modified Polyisocyanurate (PIR) core with robust low emissivity foil facings used for underfloor heating, solid and suspended floors.

Unilin XO/UF is lightweight, easy to install and combines high compressive strength with low thermal conductivity, providing a high performance solution for floor insulation.

XO/UF Underfloor provides the strength and thermal properties required to reach the high performance U-Values asked for in the Building Regulations.

Unilin XO/UF is a superior performance insulation with a lambda (thermal conductivity) value of 0.021 Wm/K and a Euroclass C fire classification.

XtroLiner Underfloor XO/UF will significantly improve the U-Value of new and existing floors.

The floor in any building is an area of considerable downward heat loss when not properly insulated.

 

Specification:

 

Thickness: 110mm

Width: 1200mm

Length: 2400mm

Size: 110mm x 1200mm x 2400mm

Pack Quantity: 3 sheets

Pack Coverage: 8.64m2

Board Coverage: 2.88m2

Profile: Square Edge

R-Value: 5.20 m2K/W

Density (Foam Core): 32kg/m3 

Thermal Conductivity: 0.021 W/mK

Compressive Strength: >150 (kPa)

Reaction to Fire: Euroclass C, s2-d0

 

Unilin XO/UF XtroLiner Floorboard Features:

 · High performance floor insulation board.

 · Faced with an embossed aluminum facings.

 · Euroclass C s2 d0 fire classification.

 · Declared lambda (thermal conductivity) of 0.021 W/mK.

 · Rigid foam modified Polyisocyanurate (PIR) core.

 · Compressive Strength >150kP (at 10% compression).

 · Suitable for underfloor heating applications.

 · Suitable for solid and suspended floors applications.

 

Unilin XO/UF XtroLiner Floorboard Installation Guidelines:

 · Below Concrete Slab - Lay and level the hardcore in layers 150mm min. / 250mm max. and compact well.

 · Sand blind base to create a level surface and to protect DPM.

 · The damp proof membrane (DPM), normally 1200g polythene or radon barrier, should be laid over the blinding, tape lapped joints to prevent passage of ground moisture.

 · Carry DPM up to the wall to meet and seal with the DPC course.

 · Contact the membrane manufacturer for further guidance on installation and best practice.

 · Lay the XtroLiner Underfloor across the DPM.

 · If two layers are required, lay the boards in a staggered jointed pattern and closely butt all edges.

 · Ensure the top of the perimeter strip is level with top of floor finish.

 · Seal around any service penetrations.

 · Lay a thin gauge polythene sheet, to act as a separating layer, over the insulation with 150mm lap joints.

 · VCL should be taped at the joints to ensure a continuous separating layer, as per BRE GBG 45 “Insulating Ground Floors”.

 · If underfloor heating is required, lay pipes and clip to the insulation boards through the separating layer.

 · Follow UFH manufacturer’s guidelines.

 · Pour and compact concrete slab to required finish floor level.

 · Below Floor Screed - Lay and level the concrete slab, allowing sufficient time to dry out, as per BS 8203.

 · Beam and block floors may need a levelling screed or grouting to ensure base level. Refer to manufacturer’s guidelines.

 · The damp proof membrane (DPM), normally 1200g polythene or radon barrier, should be laid over the blinding, tape lapped joints to prevent passage of ground moisture.

 · Carry DPM up to the wall to meet and seal with the DPC course.

 · Contact the membrane manufacturer for further guidance on installation and best practice.

 · Lay the XtroLiner Underfloor boards across the DPM.

 · If two layers are required, lay the boards in a staggered jointed pattern and loosely butt all edges.

 · Place Unilin Perimeter Strips around the floor perimeter to provide robust detailing in order to prevent Thermal Bridging.

 · Ensure the top of the perimeter strip is level with the top of the floor finish.

 · Seal around any service penetrations.

 · Lay a thin gauge polythene sheet, to act as a separating layer, over the insulation with 150mm lap joints.

 · Separating layers should be taped at the joints to ensure a continuous separating layer, as per BRE GBG 45 “Insulating Ground Floors”.

 · If underfloor heating is required, lay pipes and clip to the insulation boards through the separating layer and follow manufacturer’s guidelines.

 · Pour screed according to screed manufacturer’s guidelines.

 · Suspended Timber Floor - Install joists in the normal manner, ensuring adequate ventilation.

 · Measure gaps between joists and cut XtroLiner Underfloor to size, allowing for variations in joist spacings.

 · Allow slight oversize of cut to achieve ‘friction fit’ and seal any gaps with expanding foam.

 · Mechanically fasten treated timber battens to the joists, allowing for correct thickness of insulation.

 · Galvanised nails or saddle clips may also be used, ensuring nails are left 40mm proud of the joists.

 · Install XtroLiner Underfloor between joists with joints tightly butted and seal any gaps with expanding foam.

 · If two insulation layers are required, lay the boards in a staggered jointed pattern, also sealing any gaps with expanding foam.

 · Floor boards should be laid directly to the joists.

 

*Further information may be found in our Downloads section.

Fairly easy access to all PDF files.

Datasheet ǀ Declaration of Performance - DoP ǀ BBA Certificate ǀ Installation Guide ǀ Certificates ǀ Brochure ǀ SPEC Sheet 

*Special Product - Non returnable cancelable.

specification
Board covarage 8.64 m2
Colour Light yellow
Density 32 Kg/m3
Length 2400mm
Material Polyisocyanurate Rigid Foam
Pack Coverage 8.64m2
Pack Quantity 3 boards
Profile Square Edge
R-Value 5.20 m2K/W
Size 110mm x 1200mm x 2400mm
Thermal Conductivity 0.021 W/mK
Thickness 110mm
Width 1200mm
Fire Reaction Euroclass C, s2-d0
Coverage 2.88m2
Finish Embossed aluminum foil facings
Quantity 3 sheets
Shipping method Articulated Vehicle ǀ Courier
Applications Underfloor heating, solid, timber and suspended floors
BBA Certified Yes (No. 23/6874)
Fixing method Fixings, Laid, Glued, Fitted
Foil faced Yes, foil facings on both sides
ETA Notification Yes
U-value 0.11 - 0.20 W/m²K
Features UFH Underfloor Heating Applications
Manufacturer Unilin Insulation®

Write a review

Note: HTML is not translated!
Bad Good

We deliver insulation materials to Mainland UK only. Deliveries to Highlands, Northern Ireland, Isle of Wight etc.. might be possible at additional cost.
We offer free delivery on most of the orders above £300 (excluding VAT) (except special products - shipping cost via courier - products marked ''Request A Quote'')

Delivery of some insulation materials might be extended due to the current situation (Covid-19, stock shortages, allocations).
If you need materials quickly please contact us - we will do our best to help you source materials needed.

We do not deliver on weekends and bank holidays. Sometimes we can deliver on Saturdays - please check with us before placing the order.
If you need any further information please contact us tel. 02081910776

We can help to calculate price per m2 or linear meter (one meter in length) cost, please just contact us via phone 02081910776, email or live chat. Alternatively, you can work it out yourself quickly and easily: to get cost per meter square please divide price shown in orange area by ''Required area (m2)'' Example price of £28.80 divided by board coverage 2.88m2 = cost of £10.00 per m2.

INSTALLERS

No matter whether you choose a local installer or a national company, there’s a few tips to help you find the right installer for your home insulation improvements, such as asking for recommendations and making sure that they’re part of a certification scheme. This makes sure that they have the right skills and standards of workmanship to carry out the installation, and you can be sure that they know exactly what they are doing.

4 TIPS FOR CHOOSING THE BEST INSULATION INSTALLER

1. Thermal inspection picture in portfolio

It’s worth seeing a installer’s previous work. There’s no harm asking if you can see any properties nearby that they’ve installed insulation in. Best way would be to see Infrared Thermal Imaging Inspections. Thermal cameras spot small, but key changes in temperature in different areas of a house, identifying problematic areas that the human eye never could and some that a visual inspection could only hypothesize.

2. Reviews

Along with checking recommendations and previous work, finding reviews online can often be a great way to find out if they provide a good service or not. However, it’s best not to solely rely on reviews you may find or review websites, as there’s no controlling who writes them.

3. Compare prices

Comparing prices will also ensure companies can’t take advantage of you and give you a fair price. 

4. Word of Mouth

The best way to find a great insulation installer is through recommendations. Make sure you ask friends and family. They will most likely give you their honest opinion and can tell you from first hand experience.

 

Whether you require a wall, cladding, external wall, loft or floor insulation fitted, you can find and hire your local insulation installers from popular UK web pages. A simple internet search will return thousands of potential installers near your area.

 

https://www.nia-uk.org/find-an-installer/

https://www.checkatrade.com/

https://www.mybuilder.com/

https://www.ratedpeople.com/local-thermal-insulation

 

STOCKIST

We are the stockist of construction materials and related products for both trade and DIY from most recognizable brands in the UK like Cordek, RCM, Promat, Rockwool, Isover, Celotex, Xtratherm, Ursa, Low-E, Cedral, Kingspan, Dufaylite, British Gypsum, K-rend, Ecotherm, Iko enertherm, Kay-Metzeler, Terrawool to allow you to complete your insulation job on time at competitive prices and the highest standards.

 

Whether you are a large company or a DIYer, if you need a large amount of insulation materials, we can offer quantity discounts at the best prices. Please contact us and our friendly customer service will try to find the best and cheapest solutions for you. We value your time and we will try to deliver the products as soon as possible at a reasonable price to your construction site or house. The UK's leading insulation supplier near you and your needs. Price List available upon request.
110mm Underfloor Heating Board Unilin XO/UF UFH (pack of 3)
110mm Underfloor Heating Board Unilin XO/UF UFH (pack of 3)
£ 485.88