Menu
Your Cart

125mm Thin-R Unilin FR/ALU Flat Roof Board (pack of 3)

125mm Thin-R Unilin FR/ALU Flat Roof Board (pack of 3)
125mm Thin-R Unilin FR/ALU Flat Roof Board (pack of 3)
125mm Thin-R Unilin FR/ALU Flat Roof Board (pack of 3)
125mm Thin-R Unilin FR/ALU Flat Roof Board (pack of 3)
125mm Thin-R Unilin FR/ALU Flat Roof Board (pack of 3)
125mm Thin-R Unilin FR/ALU Flat Roof Board (pack of 3)
125mm Thin-R Unilin FR/ALU Flat Roof Board (pack of 3)
125mm Thin-R Unilin FR/ALU Flat Roof Board (pack of 3)
125mm Thin-R Unilin FR/ALU Flat Roof Board (pack of 3)
125mm Thin-R Unilin FR/ALU Flat Roof Board (pack of 3)
125mm Thin-R Unilin FR/ALU Flat Roof Board (pack of 3)
  • 125mm Unilin FR/ALU Thin-R Flat Roof PIR Insulation Board
  • Rigid PIR Insulation Board with a gas-tight foil facings on both sides
  • Used as a thermal insulation on timber or metal flat roof decks
  • High Performance Board used in conjunction with a vapour control layer
  • Used with a single-ply mechanically fixed roof waterproofing membrane
Estimated delivery:
In Stock
£ 557.06
Ex VAT: £ 464.22

Options available

125mm Thin-R Unilin FR/ALU Flat Roof PIR Insulation Board is a flat roof insulation with an enhanced vapour resistant performance suitable for use with single ply membranes.

Flat Roof Board FR/ALU is used as a thermal insulation and to create or improve falls on limited access concrete, timber or metal flat roof decks, in new and existing buildings.

Unilin FR/ALU Insulation Board is designed for use in conjunction with a vapour control layer and a single-ply mechanically fixed roof waterproofing membrane.

FR/ALU flat roof boards should be laid over the vapour control layer in a break bonded pattern.

Unilin Thin-R flat roof insulation boards should be secured by approved mechanical fixings.

The requirement for a separate vapour control layer should be assessed in accordance with BS 6229.

Typically, a 1000 gauge polythene should be used with all joints lapped and sealed.

Any fixings that penetrate it must be of the self sealing type that fuse to the vapour control layer during application.

Flat Roof FR/ALU foil faced insulation boards are suitable for use on roof decks that are subject to maintenance traffic.

The completed roof should not be used for storage of heavy materials or an air conditioning plant.

 

Specification:

 

Thickness: 125mm

Width: 1200mm

Length: 2400mm

Size: 125mm x 1200mm x 2400mm

Pack Quantity: 3 sheets

Pack Coverage: 8.64m2

Board Coverage: 2.88m2

Profile: Square Edge

R-Value: 5.65m2K/W

Density (Foam Core): 32kg/m3 

Thermal Conductivity: 0.022W/mK

Compressive Strength: >150 (kPa)

Reaction to Fire: Euroclass B, s2-d0

 

 Unilin FR/ALU Flat Roof Board Features:

 · BBA certified (11/4817).

 · High thermal performance.

 · Easy to handle and install.

 · Vapour resistant gas-tight foil facers.

 · High compressive strength >150 kPa.

 · Standard sheets size 2400mm x 1200mm.

 · Compatible with mechanically fixed single ply systems. 

 · Faced on both sides with composite gas-tight aluminium foil.

 · Suitable for loose laid roofing ballasted systems.

 · Certified thermal conductivity of 0.022 W/mK.

 

Unilin Thin-R FR/ALU Flat Roof Board Installation Guide:

 · The water vapour control layer should be laid with 150mm laps, which are turned up at any vertical upstand.

 · When the insulation boards have been positioned, the laps are turned over and sealed prior to the roof finish being completed.

 · The Flat Roof ALU foil faced boards should be laid over the vapour control layer in a break bonded pattern.

 · The long edges of the boards should be laid at right angles to the corrugations and all board joints must be fully supported by the deck.

 · The boards are generally secured by approved mechanical fixings.

 · The Flat Roof ALU boards are laid over the vapour control layer in a break bonded pattern and secured with approved mechanical fixings, or secured under a ballasted system.

 · Care should be taken to ensure that the concrete deck is graded to the correct falls, dry, clean and free from any projections or gaps.

 · The specification for fixing Unilin roof boards will vary with the location, roof height, area and topographical data.

 · Architectural specification should be consulted.

 · Generally, with 2400mm x 1200mm boards, a minimum of 6 fixings are adequate, located between 50mm and 150mm from all edges, additional fixings may be placed along the centre line.

 · Additional fixings around roof perimeter may be required.

 · 11 fixings per 2400mm x 1200mm sheet is recommended.

 · Counter sunk washers, 50mm in diameter, should be used with each fixing.

 · However, BS 6399 Part 2 or BS EN 1991-1.4: 2005 + A1: 2010 (National Annex to Eurocode 1.Actions on structures. General Actions. Wind Actions) should always be consulted.

 · During the construction process, the construction should be protected from rain penetration during breaks in the process.

 · It is recommended to seek advice from the fixing manufacturer for specific guidance.

 

Unilin FR/ALU Certification and Standards:

 · BBA Certification No. 11/4817. 

 · BS EN ISO 9001 Quality Management System.

 · BS EN ISO 14001 Environmental Management System.

 

*Further information may be found in our Downloads section.

Fairly easy access to all PDF files.

Datasheet ǀ Declaration of Performance - DoP ǀ BBA Certificate ǀ Installation Guide ǀ Certificates ǀ Brochure ǀ SPEC Sheet 

*Special Product - Non returnable cancelable.

specification
Board covarage 8.64 m2
Colour Light yellow
Density 32 Kg/m3
Length 2400mm
Material Polyisocyanurate Rigid Foam
Pack Coverage 8.64m2
Pack Quantity 3 boards
Profile Square Edge
R-Value 5.65 m2K/W
Size 125mm x 1200mm x 2400mm
Thermal Conductivity 0.022 W/mK
Thickness 125mm
Width 1200mm
Fire Reaction Euroclass B, s2-d0
Coverage 2.88m2
Finish Vapour resistant gas-tight foil
Quantity 3 sheets
Shipping method Articulated Vehicle ǀ Courier
Applications Flat Roof Waterproofing Systems
BBA Certified Yes (No. 11/4817)
Fixing method Mechanically fixed single ply waterproofing systems
Foil faced Yes, gas-tight foil facings on both sides
ETA Notification Yes
Features Composite gas-tight foil facings on both sides
Manufacturer Unilin Insulation®

Write a review

Note: HTML is not translated!
Bad Good

We deliver insulation materials to Mainland UK only. Deliveries to Highlands, Northern Ireland, Isle of Wight etc.. might be possible at additional cost.
We offer free delivery on most of the orders above £300 (excluding VAT) (except special products - shipping cost via courier - products marked ''Request A Quote'')

Delivery of some insulation materials might be extended due to the current situation (Covid-19, stock shortages, allocations).
If you need materials quickly please contact us - we will do our best to help you source materials needed.

We do not deliver on weekends and bank holidays. Sometimes we can deliver on Saturdays - please check with us before placing the order.
If you need any further information please contact us tel. 02081910776

We can help to calculate price per m2 or linear meter (one meter in length) cost, please just contact us via phone 02081910776, email or live chat. Alternatively, you can work it out yourself quickly and easily: to get cost per meter square please divide price shown in orange area by ''Required area (m2)'' Example price of £28.80 divided by board coverage 2.88m2 = cost of £10.00 per m2.

INSTALLERS

No matter whether you choose a local installer or a national company, there’s a few tips to help you find the right installer for your home insulation improvements, such as asking for recommendations and making sure that they’re part of a certification scheme. This makes sure that they have the right skills and standards of workmanship to carry out the installation, and you can be sure that they know exactly what they are doing.

4 TIPS FOR CHOOSING THE BEST INSULATION INSTALLER

1. Thermal inspection picture in portfolio

It’s worth seeing a installer’s previous work. There’s no harm asking if you can see any properties nearby that they’ve installed insulation in. Best way would be to see Infrared Thermal Imaging Inspections. Thermal cameras spot small, but key changes in temperature in different areas of a house, identifying problematic areas that the human eye never could and some that a visual inspection could only hypothesize.

2. Reviews

Along with checking recommendations and previous work, finding reviews online can often be a great way to find out if they provide a good service or not. However, it’s best not to solely rely on reviews you may find or review websites, as there’s no controlling who writes them.

3. Compare prices

Comparing prices will also ensure companies can’t take advantage of you and give you a fair price. 

4. Word of Mouth

The best way to find a great insulation installer is through recommendations. Make sure you ask friends and family. They will most likely give you their honest opinion and can tell you from first hand experience.

 

Whether you require a wall, cladding, external wall, loft or floor insulation fitted, you can find and hire your local insulation installers from popular UK web pages. A simple internet search will return thousands of potential installers near your area.

 

https://www.nia-uk.org/find-an-installer/

https://www.checkatrade.com/

https://www.mybuilder.com/

https://www.ratedpeople.com/local-thermal-insulation

 

STOCKIST

We are the stockist of construction materials and related products for both trade and DIY from most recognizable brands in the UK like Cordek, RCM, Promat, Rockwool, Isover, Celotex, Xtratherm, Ursa, Low-E, Cedral, Kingspan, Dufaylite, British Gypsum, K-rend, Ecotherm, Iko enertherm, Kay-Metzeler, Terrawool to allow you to complete your insulation job on time at competitive prices and the highest standards.

 

Whether you are a large company or a DIYer, if you need a large amount of insulation materials, we can offer quantity discounts at the best prices. Please contact us and our friendly customer service will try to find the best and cheapest solutions for you. We value your time and we will try to deliver the products as soon as possible at a reasonable price to your construction site or house. The UK's leading insulation supplier near you and your needs. Price List available upon request.
125mm Thin-R Unilin FR/ALU Flat Roof Board (pack of 3)
125mm Thin-R Unilin FR/ALU Flat Roof Board (pack of 3)
£ 557.06