Menu
Your Cart

70-90mm Tapered Roof PIR Board Unilin TR/ALU (1200x1200)

70-90mm Tapered Roof PIR Board Unilin TR/ALU (1200x1200)
70-90mm Tapered Roof PIR Board Unilin TR/ALU (1200x1200)
70-90mm Tapered Roof PIR Board Unilin TR/ALU (1200x1200)
70-90mm Tapered Roof PIR Board Unilin TR/ALU (1200x1200)
70-90mm Tapered Roof PIR Board Unilin TR/ALU (1200x1200)
70-90mm Tapered Roof PIR Board Unilin TR/ALU (1200x1200)
70-90mm Tapered Roof PIR Board Unilin TR/ALU (1200x1200)
70-90mm Tapered Roof PIR Board Unilin TR/ALU (1200x1200)
70-90mm Tapered Roof PIR Board Unilin TR/ALU (1200x1200)
  • 70-90mm Tapered Roof Insulation Board Unilin TR/ALU (1200x1200mm)
  • Unilin TR/ALU Tapered Roof systems address most flat roof failures
  • Unilin TR/ALU is compatible with loose laid ballasted systems
  • Tapered Roof TR/ALU is suitable for new build and refurbishment roofs
  • TR/ALU is compatible with mechanically fixed single ply systems
Estimated delivery:
In Stock
£ 101.88
Ex VAT: £ 84.90

Options available

70-90mm Tapered Roof PIR Board Unilin TR/ALU, comprising a rigid foam Polyisocyanurate (PIR) core sandwiched between low emissivity vapour-tight foil facings used with single ply roof membranes.

Unilin TR/ALU Tapered Roof systems address most flat roof failures i.e. ponding of rainwater caused by an inability to shed rainwater on the surface whilst providing a high level of thermal insulation.

Tapered Roof ALU insulation systems have been designed to provide solutions to design issues that arise in new and refurbishment roofs.

A U-Value calculation should be carried out at design stage for minimum or average U-Values depending on requirements.

In addition a condensation risk analysis must be calculated within the guidance provided in BS 5250 code of practice for control of condensation in buildings.

Typically a 1000 gauge polythene should be used with all joints lapped and sealed.

These foil faced insulation boards are suitable for use on roof decks that are subject to maintenance traffic only.

The completed roof should not be used for storage of heavy materials or an air conditioning plant.

Unilin TR/ALU Tapered roof boards providing total solutions for tapered roof projects.

 

Specification:

 

Thickness: 70-90mm

Width: 1200mm

Length: 1200mm

Size: 70-90mm x 1200mm x 1200mm

Board Coverage: 1.44m2

Profile: Square Edge

R-Value: 3.15m2K/W – 4.05m2K/W

Density (Foam Core): 32kg/m3 

Thermal Conductivity: 0.022W/mK

Compressive Strength: >150 (kPa)

Reaction to Fire: Euroclass B, s2-d0

 

Tapered Roof TR/ALU Features:

 · BBA certified (11/4817).

 · High thermal performance.

 · Easy to handle and install.

 · Unique tapered profiled boards.

 · Vapour resistant gas-tight foil facers.

 · High compressive strength >150 kPa.

 · Available in 1200mm x 1200mm sheets.

 · Compatible with mechanically fixed single ply systems. 

 · Faced on both sides with composite gas-tight aluminium foil.

 · Certified thermal conductivity of 0.022 W/mK.

 · Suitable for new build and refurbishment roofs.

 · Compatible with loose laid ballasted systems.

 

Unilin TR/ALU Tapered Roof Board Installation Guide:

 · The specification for fixing of Unilin roof boards will vary with the location, roof height/width and topographical data, architectural specifications should be consulted.

 · These tapered boards should be laid over the vapour control layer with all joints fully supported by the deck.

 · They are secured by mechanical fixings with washers.

 · The waterproofing is also mechanically fixed in accordance with the specific manufacturer’s instructions.

 · The tapered boards should be laid over the vapour control layer in a break bonded pattern.

 · The boards are generally secured by approved mechanical fixings.

 · The waterproofing is also mechanically fixed in accordance with the specific manufacturer’s instructions.

 · The tapered boards should be fitted over the vapour control layer that has been laid on a prepared deck that is clear, dry and level without gaps.

 · They are secured by mechanical fixings with washers.

 · The waterproofing is also mechanically fixed in accordance with the specific manufacturers instructions.

 · The facing of these boards should not be considered as temporary waterproofing, when work is interrupted or at the end of each day, a night joint must be made to prevent water penetration.

 · Unilin tapered boards should be waterproofed as soon as possible after fixing.

 

Unilin Thin-R TR/ALU Certification and Standards:

 · BBA Certification No. 11/4817. 

 · BS EN ISO 9001 Quality Management System.

 · BS EN ISO 14001 Environmental Management System.

 

*Further information may be found in our Downloads section.

Fairly easy access to all PDF files.

Datasheet ǀ Declaration of Performance - DoP ǀ BBA Certificate ǀ Installation Guide ǀ Certificates ǀ Brochure ǀ SPEC Sheet 

 

*Special Product - Non returnable cancelable.

specification
Board covarage 1.44 m2
Colour Light yellow
Density 32 Kg/m3
Length 1200mm
Material Polyisocyanurate Rigid Foam
Profile Square Edge
R-Value 3.15m2K/W - 4.05m2K/W
Size 70-90mm x 1200mm x 1200mm
Thermal Conductivity 0.022 W/mK
Thickness 70-90mm
Width 1200mm
Fire Reaction Euroclass B, s2-d0
Coverage 1.44m2
Finish Vapour resistant gas-tight foil
Shipping method Articulated Vehicle ǀ Courier
Applications Flat Roof Waterproofing Systems
BBA Certified Yes (No. 11/4817)
Fixing method Mechanically fixed single ply waterproofing systems
Foil faced Yes, gas-tight foil facings on both sides
ETA Notification Yes
Features Unique tapered roof profiled sheets
Manufacturer Unilin Insulation®

Write a review

Note: HTML is not translated!
Bad Good

We deliver insulation materials to Mainland UK only. Deliveries to Highlands, Northern Ireland, Isle of Wight etc.. might be possible at additional cost.
We offer free delivery on most of the orders above £300 (excluding VAT) (except special products - shipping cost via courier - products marked ''Request A Quote'')

Delivery of some insulation materials might be extended due to the current situation (Covid-19, stock shortages, allocations).
If you need materials quickly please contact us - we will do our best to help you source materials needed.

We do not deliver on weekends and bank holidays. Sometimes we can deliver on Saturdays - please check with us before placing the order.
If you need any further information please contact us tel. 02081910776

We can help to calculate price per m2 or linear meter (one meter in length) cost, please just contact us via phone 02081910776, email or live chat. Alternatively, you can work it out yourself quickly and easily: to get cost per meter square please divide price shown in orange area by ''Required area (m2)'' Example price of £28.80 divided by board coverage 2.88m2 = cost of £10.00 per m2.

INSTALLERS

No matter whether you choose a local installer or a national company, there’s a few tips to help you find the right installer for your home insulation improvements, such as asking for recommendations and making sure that they’re part of a certification scheme. This makes sure that they have the right skills and standards of workmanship to carry out the installation, and you can be sure that they know exactly what they are doing.

4 TIPS FOR CHOOSING THE BEST INSULATION INSTALLER

1. Thermal inspection picture in portfolio

It’s worth seeing a installer’s previous work. There’s no harm asking if you can see any properties nearby that they’ve installed insulation in. Best way would be to see Infrared Thermal Imaging Inspections. Thermal cameras spot small, but key changes in temperature in different areas of a house, identifying problematic areas that the human eye never could and some that a visual inspection could only hypothesize.

2. Reviews

Along with checking recommendations and previous work, finding reviews online can often be a great way to find out if they provide a good service or not. However, it’s best not to solely rely on reviews you may find or review websites, as there’s no controlling who writes them.

3. Compare prices

Comparing prices will also ensure companies can’t take advantage of you and give you a fair price. 

4. Word of Mouth

The best way to find a great insulation installer is through recommendations. Make sure you ask friends and family. They will most likely give you their honest opinion and can tell you from first hand experience.

 

Whether you require a wall, cladding, external wall, loft or floor insulation fitted, you can find and hire your local insulation installers from popular UK web pages. A simple internet search will return thousands of potential installers near your area.

 

https://www.nia-uk.org/find-an-installer/

https://www.checkatrade.com/

https://www.mybuilder.com/

https://www.ratedpeople.com/local-thermal-insulation

 

STOCKIST

We are the stockist of construction materials and related products for both trade and DIY from most recognizable brands in the UK like Cordek, RCM, Promat, Rockwool, Isover, Celotex, Xtratherm, Ursa, Low-E, Cedral, Kingspan, Dufaylite, British Gypsum, K-rend, Ecotherm, Iko enertherm, Kay-Metzeler, Terrawool to allow you to complete your insulation job on time at competitive prices and the highest standards.

 

Whether you are a large company or a DIYer, if you need a large amount of insulation materials, we can offer quantity discounts at the best prices. Please contact us and our friendly customer service will try to find the best and cheapest solutions for you. We value your time and we will try to deliver the products as soon as possible at a reasonable price to your construction site or house. The UK's leading insulation supplier near you and your needs. Price List available upon request.
70-90mm Tapered Roof PIR Board Unilin TR/ALU (1200x1200)
70-90mm Tapered Roof PIR Board Unilin TR/ALU (1200x1200)
£ 101.88