Menu
Your Cart

71mm Unilin FR/TP Flat Roof Insulation Over Joists

71mm Unilin FR/TP Flat Roof Insulation Over Joists
71mm Unilin FR/TP Flat Roof Insulation Over Joists
71mm Unilin FR/TP Flat Roof Insulation Over Joists
71mm Unilin FR/TP Flat Roof Insulation Over Joists
71mm Unilin FR/TP Flat Roof Insulation Over Joists
  • 71mm Unilin FR/TP Warm Roof PIR Ply Insulation Board Decking
  • Used for new build and refurbishment flat roof applications
  • Creates a continuous Vapour Control Layer (Vapour Barrier)
  • PIR foam insulation core and 6mm plywood insulated decking
  • Unilin FR/TP Thermal ply flat roof insulation over joists board
Estimated delivery:
In Stock
£ 100.68
Ex VAT: £ 83.90

Options available

71mm Unilin FR/TP Flat Roof Insulation Board is a composite insulated decking board made of 65mm PIR insulation core bonded to 6mm plywood used for new and refurbishment flat roof applications.

Unilin FR/TP Thermal Ply Flat Roof Insulation Board is faced to the under side with a gas-tight foil facer, bedding the panel onto a bed of mastic creates a continuous vapour control layer.

FR/TP Pre-insulated Roof Decking is designed for use on new roofs or upgrading the thermal performance of existing roofs.

The roof construction is a critical element in the building fabric and is an area at very high risk of heat loss. 

A warm roof application with all the insulation above the joists is considered best practice.

Where insulation between the joists is required to reduce the overall height please note the insulation above the deck should have a higher thermal resistance than that of the insulation between the joists.

Unilin FR/TP provides rapid weather proofing and reliable long term energy savings for buildings.

The thermal conductivity of the PIR insulation board is 0.022 W/mK (Lambda value).

The thermal conductivity of the 6mm WBP Plywood is 0.14 W/mK (Lambda value).

 

Specification:

 

Thickness: 71mm

Size: 71mm x 1200mm x 2400mm

Length: 2400mm

Width: 1200mm

Board coverage: 2.88m2

Density (Foam Core): 32 Kg/m3

Profile: Square Edge

Thermal Conductivity: 0.022 W/mk

R-Value: 2.94m2K/W

Compressive Strength: >150 kPa (10% Compression)

Water Vapour Resistivity: >100 MNs/gm

 

Unilin FR/TP Warm Roof Insulation Board Features:

 · Creates a continuous vapour control layer.

 · Provides reliable long term energy savings for buildings.

 · Insulation and decking in one fix.

 · For new build and refurbishment roofs.

 · Installed and weatherproofed rapidly.

 · Accepts a wide variety of weathering systems.

 · Available in a standard board size of 1200mm x 2400mm (8x4 sheets).

 · Gas-tight foil facing.

 · Easy to handle and install.

 

Unilin FR/TP Flat Roof Insulation Decking Installation Guide:

 · A warm roof application with all the insulation above the joists is considered best practice.

 · Where insulation between the joists is required to reduce the overall height please note the insulation above the deck should have a higher thermal resistance than that of the insulation between the joists.

 · The boards should be fixed to a minimum of 50mm thick joists at 600mm centres max with the plywood uppermost.

 · Boards should be staggered and butted.

 · Each edge should have a minimum bearing of 20mm on the joist.

 · All edges should be supported - add noggings where necessary.

 · Stagger fixings where boards are butted.

 · Boards should be embedded in vapour resistant mastic to provide a vapour control layer in conjunction with foil facing.

 · Mastic should be laid wide enough to facilitate 2 panel edges and be continuous around all edges.

 · The boards should be fixed with low profile screw fixings, placed at 200mm centres around the perimeter of the boards and at 300mm centres along any intermediate supports.

 · All fixings should penetrate the joists by a minimum of 35mm and be placed 12mm from the edge of the insulation, and no further than 50mm from any corners.

 · Care should be taken to ensure that the heads of any fixings are flush with the plywood surface and not over-driven.

 · The roof should be fire protected to the underside by applying a layer of plasterboard or other approved material.

 · Thermal Ply is suitable for maintenance traffic loadings only.

 

Certification:

BS EN ISO 9001 Quality Management System

BS EN ISO 14001 Environmental Management System

 

Thermal conductivity is dependent on facings and product thickness.

 

*Further information may be found in our Downloads section.

Fairly easy access to all PDF files.

Datasheet ǀ Declaration of Performance - DoP ǀ BBA Certificate ǀ Installation Guide ǀ Certificates ǀ Brochure ǀ SPEC Sheet 

*Special Product - Non returnable cancelable.

specification
Board covarage 2.88 m2
Compressive Strength 150 kPa (10% Compression)
Density 32 Kg/m3
Length 2400mm
Material Polyisocyanurate core ǀ Plywood
Profile Square Edge
R-Value 2.94m2K/W
Size 71mm x 1200mm x 2400mm
Thermal Conductivity 0.022 W/mk
Thickness 71mm
Water Vapour Resistivity 100 MNs/gm
Width 1200mm
Vapour Resistivity 100 MNs/gm
Finish Gas-tight foil ǀ WBP Plywood
Shipping method Articulated Vehicle ǀ Courier
Grade WBP
Applications Flat Roof ǀ Warm Roof ǀ Decking
BBA Certified Yes (no. 08/4613)
Foil faced One side (aluminium)
ETA Notification Yes
Features Continuous Vapour Control Layer
Manufacturer Unilin Insulation®

Write a review

Note: HTML is not translated!
Bad Good

We deliver insulation materials to Mainland UK only. Deliveries to Highlands, Northern Ireland, Isle of Wight etc.. might be possible at additional cost.
We offer free delivery on most of the orders above £300 (excluding VAT) (except special products - shipping cost via courier - products marked ''Request A Quote'')

Delivery of some insulation materials might be extended due to the current situation (Covid-19, stock shortages, allocations).
If you need materials quickly please contact us - we will do our best to help you source materials needed.

We do not deliver on weekends and bank holidays. Sometimes we can deliver on Saturdays - please check with us before placing the order.
If you need any further information please contact us tel. 02081910776

We can help to calculate price per m2 or linear meter (one meter in length) cost, please just contact us via phone 02081910776, email or live chat. Alternatively, you can work it out yourself quickly and easily: to get cost per meter square please divide price shown in orange area by ''Required area (m2)'' Example price of £28.80 divided by board coverage 2.88m2 = cost of £10.00 per m2.

INSTALLERS

No matter whether you choose a local installer or a national company, there’s a few tips to help you find the right installer for your home insulation improvements, such as asking for recommendations and making sure that they’re part of a certification scheme. This makes sure that they have the right skills and standards of workmanship to carry out the installation, and you can be sure that they know exactly what they are doing.

4 TIPS FOR CHOOSING THE BEST INSULATION INSTALLER

1. Thermal inspection picture in portfolio

It’s worth seeing a installer’s previous work. There’s no harm asking if you can see any properties nearby that they’ve installed insulation in. Best way would be to see Infrared Thermal Imaging Inspections. Thermal cameras spot small, but key changes in temperature in different areas of a house, identifying problematic areas that the human eye never could and some that a visual inspection could only hypothesize.

2. Reviews

Along with checking recommendations and previous work, finding reviews online can often be a great way to find out if they provide a good service or not. However, it’s best not to solely rely on reviews you may find or review websites, as there’s no controlling who writes them.

3. Compare prices

Comparing prices will also ensure companies can’t take advantage of you and give you a fair price. 

4. Word of Mouth

The best way to find a great insulation installer is through recommendations. Make sure you ask friends and family. They will most likely give you their honest opinion and can tell you from first hand experience.

 

Whether you require a wall, cladding, external wall, loft or floor insulation fitted, you can find and hire your local insulation installers from popular UK web pages. A simple internet search will return thousands of potential installers near your area.

 

https://www.nia-uk.org/find-an-installer/

https://www.checkatrade.com/

https://www.mybuilder.com/

https://www.ratedpeople.com/local-thermal-insulation

 

STOCKIST

We are the stockist of construction materials and related products for both trade and DIY from most recognizable brands in the UK like Cordek, RCM, Promat, Rockwool, Isover, Celotex, Xtratherm, Ursa, Low-E, Cedral, Kingspan, Dufaylite, British Gypsum, K-rend, Ecotherm, Iko enertherm, Kay-Metzeler, Terrawool to allow you to complete your insulation job on time at competitive prices and the highest standards.

 

Whether you are a large company or a DIYer, if you need a large amount of insulation materials, we can offer quantity discounts at the best prices. Please contact us and our friendly customer service will try to find the best and cheapest solutions for you. We value your time and we will try to deliver the products as soon as possible at a reasonable price to your construction site or house. The UK's leading insulation supplier near you and your needs. Price List available upon request.
71mm Unilin FR/TP Flat Roof Insulation Over Joists
71mm Unilin FR/TP Flat Roof Insulation Over Joists
£ 100.68