Menu
Your Cart

150mm Thin-R Unilin FR/BGM Flat Roof Solutions (pack of 3)

150mm Thin-R Unilin FR/BGM Flat Roof Solutions (pack of 3)
150mm Thin-R Unilin FR/BGM Flat Roof Solutions (pack of 3)
150mm Thin-R Unilin FR/BGM Flat Roof Solutions (pack of 3)
150mm Thin-R Unilin FR/BGM Flat Roof Solutions (pack of 3)
150mm Thin-R Unilin FR/BGM Flat Roof Solutions (pack of 3)
150mm Thin-R Unilin FR/BGM Flat Roof Solutions (pack of 3)
150mm Thin-R Unilin FR/BGM Flat Roof Solutions (pack of 3)
  • Unilin FR/BGM Flat Roof Insulation Board 150mm x 600mm x 1200mm
  • Faced with a polypropylene fleece finished bitumen glass-fibre working surface
  • Faced with a mineral glass facing to the underside insulation board surface
  • Used for partially bonded torched-on built-up bituminous felt systems
  • Can be used as a cheaper alternative to Celotex and Kingspan TR24 Insulation
Estimated delivery:
In Stock
£ 138.16
Ex VAT: £ 115.13

Options available

150mm Unilin FR/BGM is used as a thermal insulation layer and to create or improve falls on limited access concrete, timber or metal flat roof decks in domestic and non-domestic buildings.

FR/BGM boards are suitable for use with most bitumen based, partially bonded waterproofing systems typically including a BS EN 13707: 2013 (Flexible sheets for waterproofing).

Reinforced bitumen sheets for roof waterproofing type 3G perforated base layer or proprietary system.

Unilin Thin-R FR/BGM (Fleece side upper most) may also be fully bonded.

During the construction process, the construction should be protected from rain penetration during breaks in the process.

With fully bonded applications additional care is required to ensure that the construction remains free from moisture.

Failure to protect will result in blistering of the waterproof layer.

Unilin FR/BGM can be used as a cheaper alternative to Celotex, EcoTherm, Recticel and Kingspan TR24 Therma Roof insulation boards.

 

Specification:

 

Thickness: 150mm

Width: 600mm

Length: 1200mm

Size: 150mm x 600mm x 1200mm

Sheets per pack: 3

Pack Coverage: 2.16m2

Board Coverage: 0.72m2

Profile: Straight Edge

R-Value: 6.24m2K/W

Density (Foam Core): 32kg/m3 

Thermal Conductivity: 0.024W/mK

Compressive Strength: >150 (kPa)

 

Unilin Thin-R FR/BGM Insulation Board Features:

 · Certified by IGBC.

 · BBA certified.

 · Easy to handle 1200mm x 600mm boards.

 · High performance Polyisocyanurate (PIR) core.

 · For domestic and non-domestic buildings.

 · High compressive strength >150 kPa.

 · Compatible with most bituminous based roofing systems.

 · An Environmental Product Declaration (EPD).

 · Faced with a polypropylene fleece finished bitumen / glass fibre working surface.

 · Faced with mineral glass facing to the underside of the board.

 · Thermal conductivity (lambda) 0.024 W/mK - 0.027 W/mK.

 · Can be used as a cheaper alternative to Celotex, EcoTherm, Recticel and Kingspan TR24 Therma Roof insulation boards.

 

Unilin FR/BGM Roof Design (Roofing Systems Installation):

 · FR/BGM is suitable for use with most bitumen based, partially bonded waterproofing systems typically including a BS 747 type 3G perforated base layer or proprietary system.

 · FR/BGM, (Fleece side upper most) may also be fully bonded.

 · Guidance in regard to moisture and condensation should be in accordance with BS 8217.

 · During the construction process, the construction should be protected from rain penetration during breaks in the process.

 · With fully bonded applications additional care is required to ensure that the construction remains free from moisture.

 · Failure to protect will result in blistering of the waterproof layer.

 · The fall on a flat roof should be designed to ensure that rainfall does not pond.

 · The boards are suitable for use on roof decks that are subject to limited maintenance foot traffic.

 · Walkways should be provided on roofs requiring regular pedestrian access.

 · When the roof is complete, protective boarding should be laid if additional site work is to be carried out.

 · Built up roofing systems should be finished with a suitable reflective layer such as chippings.

 · The fire rating, when tested to EN 13501-5 and BS 476 Part 3 ‘External Fire Exposure Roof Test’, will be dependent upon the waterproofing system specified.

 · Decks should be primed before the application of the hot bitumen used to bond the vapour control layer.

 · Reference should be made to BS 8217 when applying the vapour control layer.

 · Carry the VCL past the insulation and seal with the parapet wall.

 · On metal decks, Unilin FR/BGM should be laid break bonded into hot bitumen (max temperature 240°C) mopped or poured over the vapour control layer.

 · The boards can also be mechanically fixed or the mineral coated glass fibre facer (MG) can be adhered with other suitable adhesive.

 · Fixing heads should be sealed with bitumen.

 · Laying (Concrete Deck) Ensure concrete decks are laid to provide correct falls to outlets and are clean, dry, without projections.

 · Primer should be laid in accordance with the manufacturer’s instructions.

 · The vapour control layer should be fully bonded to the deck and the Unilin FR/BGM should be laid into hot bitumen on the vapour control layer in a break bonded pattern.

 · The boards can also be mechanically fixed or the mineral coated glass fibre facer (MG) can be adhered with other suitable adhesive.

 · Fixing heads should be sealed with bitumen.

 · Laying (Timber Deck) On plywood decks, Unilin FR/BGM should be fully bedded in hot bitumen over a continuous vapour control layer which has been nailed or bonded to the deck.

 · The boards can also be mechanically fixed or the mineral coated glass fibre facer (MG) can be adhered with other suitable adhesive.

 · Fixing heads should be sealed with bitumen.

 · The specification for fixing Unilin roof boards will vary with the location, roof height/width and topographical data.

 · Architectural specifications should be consulted.

 · Generally with 1200mm x 600mm boards, a minimum of 4 fixings per board are adequate, located between 50mm and 150mm from all edges, additional fixings may be placed along the centre line.

 · Countersunk washers, 50mm in diameter, should be used with each fixing.

 · However, BS 6399 Part 2 or BS EN 1991-1.4: 2005 + A1: 2010 (National Annex to Eurocode 1.Actions on structures. General Actions. Wind Actions) should always be consulted.

 · In two layer systems, all layers should be fixed in accordance with fixing manufacturers instructions.

 · Bitumen Based Built Up Roofing Systems Technical guidance from the appropriate bitumen waterproofing manufacturer should be sought as to assure proper installation of the bonded built up roofing system.
 

Unilin FR/BGM Thin-R Certification and Standards:

 · BBA Certification No. 11/4878. 

 · BS EN ISO 9001 Quality Management System.

 · BS EN ISO 14001 Environmental Management System.

 

*For comprehensive calculations on all deck types, please contact Unilin Technical Support.

*Thermal conductivity is dependent on facings and product thickness.

 

*Further information may be found in our Downloads section.

Fairly easy access to all PDF files.

Datasheet ǀ Declaration of Performance - DoP ǀ BBA Certificate ǀ Installation Guide ǀ Certificates ǀ Brochure ǀ SPEC Sheet ǀ 

*Special Product - Non returnable cancelable.

specification
Board covarage 2.16 m2
Colour Magnolia
Length 1200mm
Material Polyisocyanurate Rigid Foam
Pack Coverage 2.16m2
Pack Quantity 3 sheets
Profile Straight Edge
R-Value 6.24 m2K/W
Size 150mm x 600mm x 1200mm
Thermal Conductivity 0.024 W/mK
Thickness 150mm
Width 600mm
Coverage 0.72m2
Finish Polypropylene fleece bitumen glass-fibre
Quantity 3
Shipping method Articulated Vehicle ǀ Courier
Applications Torched-on built-up bituminous felt systems
BBA Certified Yes (No. 11/4878)
Fixing method Torched-on, Fixings, Washers, Laid, Glued
ETA Notification Yes
Features High Performance Flat Roof Board
Manufacturer Unilin Insulation®

Write a review

Note: HTML is not translated!
Bad Good

We deliver insulation materials to Mainland UK only. Deliveries to Highlands, Northern Ireland, Isle of Wight etc.. might be possible at additional cost.
We offer free delivery on most of the orders above £300 (excluding VAT) (except special products - shipping cost via courier - products marked ''Request A Quote'')

Delivery of some insulation materials might be extended due to the current situation (Covid-19, stock shortages, allocations).
If you need materials quickly please contact us - we will do our best to help you source materials needed.

We do not deliver on weekends and bank holidays. Sometimes we can deliver on Saturdays - please check with us before placing the order.
If you need any further information please contact us tel. 02081910776

We can help to calculate price per m2 or linear meter (one meter in length) cost, please just contact us via phone 02081910776, email or live chat. Alternatively, you can work it out yourself quickly and easily: to get cost per meter square please divide price shown in orange area by ''Required area (m2)'' Example price of £28.80 divided by board coverage 2.88m2 = cost of £10.00 per m2.

INSTALLERS

No matter whether you choose a local installer or a national company, there’s a few tips to help you find the right installer for your home insulation improvements, such as asking for recommendations and making sure that they’re part of a certification scheme. This makes sure that they have the right skills and standards of workmanship to carry out the installation, and you can be sure that they know exactly what they are doing.

4 TIPS FOR CHOOSING THE BEST INSULATION INSTALLER

1. Thermal inspection picture in portfolio

It’s worth seeing a installer’s previous work. There’s no harm asking if you can see any properties nearby that they’ve installed insulation in. Best way would be to see Infrared Thermal Imaging Inspections. Thermal cameras spot small, but key changes in temperature in different areas of a house, identifying problematic areas that the human eye never could and some that a visual inspection could only hypothesize.

2. Reviews

Along with checking recommendations and previous work, finding reviews online can often be a great way to find out if they provide a good service or not. However, it’s best not to solely rely on reviews you may find or review websites, as there’s no controlling who writes them.

3. Compare prices

Comparing prices will also ensure companies can’t take advantage of you and give you a fair price. 

4. Word of Mouth

The best way to find a great insulation installer is through recommendations. Make sure you ask friends and family. They will most likely give you their honest opinion and can tell you from first hand experience.

 

Whether you require a wall, cladding, external wall, loft or floor insulation fitted, you can find and hire your local insulation installers from popular UK web pages. A simple internet search will return thousands of potential installers near your area.

 

https://www.nia-uk.org/find-an-installer/

https://www.checkatrade.com/

https://www.mybuilder.com/

https://www.ratedpeople.com/local-thermal-insulation

 

STOCKIST

We are the stockist of construction materials and related products for both trade and DIY from most recognizable brands in the UK like Cordek, RCM, Promat, Rockwool, Isover, Celotex, Xtratherm, Ursa, Low-E, Cedral, Kingspan, Dufaylite, British Gypsum, K-rend, Ecotherm, Iko enertherm, Kay-Metzeler, Terrawool to allow you to complete your insulation job on time at competitive prices and the highest standards.

 

Whether you are a large company or a DIYer, if you need a large amount of insulation materials, we can offer quantity discounts at the best prices. Please contact us and our friendly customer service will try to find the best and cheapest solutions for you. We value your time and we will try to deliver the products as soon as possible at a reasonable price to your construction site or house. The UK's leading insulation supplier near you and your needs. Price List available upon request.
150mm Thin-R Unilin FR/BGM Flat Roof Solutions (pack of 3)
150mm Thin-R Unilin FR/BGM Flat Roof Solutions (pack of 3)
£ 138.16