Menu
Your Cart

Ceresit CT325 GlassFibre Rendering Mesh Roll ǀ 55m2

Ceresit CT325 GlassFibre Rendering Mesh Roll - 55m2
Ceresit CT325 GlassFibre Rendering Mesh Roll ǀ 55m2
  • E-Glass fabric - Alkali-resistant
  • Mesh square dimensions: 4.0mm × 4.0mm
  • External Thermal Insulation Composite Systems
  • Density mesh of 160 g/m2 (TT160)
  • 1,1m width and 50m length - 55m2 roll
Estimated delivery:
In Stock
£ 125.83
Ex VAT: £ 104.86
  • Brand: Ceresit®
  • Model: CT325 EWI
  • Weight: 9.50kg
  • Dimensions: 50,000mm x 1.20mm x 1,100mm
  • SKU: CT325
  • Product code: P1-413
  • MPN: Ceresit CT325 Rendering Mesh Roll

Options available

Ceresit CT325 is a Glass-Fibre, tearproof, slipproof Reinforcing Mesh Roll for embedding into reinforcing mortars for External Wall Insulation Systems

Higher density of 160g per m2 means higher mechanical loads allowed. 

Mesh Roll (coloured green) square dimensions: 4mm x 4mm.

It is important to keep the mesh overlaps on next applied belts to about 10cm.

Properly applied mesh should not be visible and completely embeded in the mortar. 

Coverage 55m2 per roll - 1.1m wide and 50m long.

 

Application:

Prepared Ceresit reinforcing mortar should be spread evenly over the surface of the boards with a tooth trowel with teeth the size of 10mm - 12mm. 

In the case of mineral wool boards prior to distribution must also make ”priming” with mortar. 

In the prepared layer immediately spread fiberglass mesh, then embed by using a metal trowel and make it smooth. 

In case of corner holes in the walls (eg. windows) it is recommended to embed diagonally additional parts of mesh with dimensions of about 20cm x 30 cm

Bets of mesh can not coincide with the joints between the panels.

 

Key Points:

 · Alkali-resistant

 · Slipproof

 · Tearproof

 

Scope of Use:

Reinforcing mesh for embedding into reinforcing mortars for Ceresit External Thermal Insulation Composite Systems (ETICS).

For facades or pedestals exposed to higher mechanical loads, it is preferred to use CT325 in two layers or use higher density mesh of 160 g/m2

 

Important:

Please refer also to the technical data sheets of other products in the Ceresit ETICS systems for specifi c advice on how to prepare the substrate and execute the work.

Therefore skin and eyes should be protected. In case of contact with eyes, they should be rinsed with water and the general practitioner should be consulted.

 

*Further information may be found in our Downloads section.

Fairly easy access to all PDF files.

Datasheet ǀ Declaration of Performance - DoP ǀ BBA Certificate ǀ Installation Guide ǀ Certificates ǀ Brochure ǀ SPEC Sheet

 

non returnable product.

specification
Board covarage 55.00 m2
Colour Green
Consistancy Slipproof & Tearproof
Density 160g/m2
Length 50.00m
Material Fibreglass Mesh
Storage in a dry place, from -10°C to +50°C
Weight 9.50kg
Width 1.10m
Shelf Life 24 months
Dimensions 4.0mm × 4.0mm (mesh square)
Application Temperature from +5 °C to +25 °C
Shipping method Rigid Vehicle ǀ Courier
Applications External Wall Insulation Systems
ETA Notification Yes
Features Tearproof Reinforcing Mesh for Rendering
Manufacturer Henkel Ceresit®

Write a review

Note: HTML is not translated!
Bad Good

We deliver insulation materials to Mainland UK only. Deliveries to Highlands, Northern Ireland, Isle of Wight etc.. might be possible at additional cost.
We offer free delivery on most of the orders above £300 (excluding VAT) (except special products - shipping cost via courier - products marked ''Request A Quote'')

Delivery of some insulation materials might be extended due to the current situation (Covid-19, stock shortages, allocations).
If you need materials quickly please contact us - we will do our best to help you source materials needed.

We do not deliver on weekends and bank holidays. Sometimes we can deliver on Saturdays - please check with us before placing the order.
If you need any further information please contact us tel. 02081910776

We can help to calculate price per m2 or linear meter (one meter in length) cost, please just contact us via phone 02081910776, email or live chat. Alternatively, you can work it out yourself quickly and easily: to get cost per meter square please divide price shown in orange area by ''Required area (m2)'' Example price of £28.80 divided by board coverage 2.88m2 = cost of £10.00 per m2.

INSTALLERS

No matter whether you choose a local installer or a national company, there’s a few tips to help you find the right installer for your home insulation improvements, such as asking for recommendations and making sure that they’re part of a certification scheme. This makes sure that they have the right skills and standards of workmanship to carry out the installation, and you can be sure that they know exactly what they are doing.

4 TIPS FOR CHOOSING THE BEST INSULATION INSTALLER

1. Thermal inspection picture in portfolio

It’s worth seeing a installer’s previous work. There’s no harm asking if you can see any properties nearby that they’ve installed insulation in. Best way would be to see Infrared Thermal Imaging Inspections. Thermal cameras spot small, but key changes in temperature in different areas of a house, identifying problematic areas that the human eye never could and some that a visual inspection could only hypothesize.

2. Reviews

Along with checking recommendations and previous work, finding reviews online can often be a great way to find out if they provide a good service or not. However, it’s best not to solely rely on reviews you may find or review websites, as there’s no controlling who writes them.

3. Compare prices

Comparing prices will also ensure companies can’t take advantage of you and give you a fair price. 

4. Word of Mouth

The best way to find a great insulation installer is through recommendations. Make sure you ask friends and family. They will most likely give you their honest opinion and can tell you from first hand experience.

 

Whether you require a wall, cladding, external wall, loft or floor insulation fitted, you can find and hire your local insulation installers from popular UK web pages. A simple internet search will return thousands of potential installers near your area.

 

https://www.nia-uk.org/find-an-installer/

https://www.checkatrade.com/

https://www.mybuilder.com/

https://www.ratedpeople.com/local-thermal-insulation

 

STOCKIST

We are the stockist of construction materials and related products for both trade and DIY from most recognizable brands in the UK like Cordek, RCM, Promat, Rockwool, Isover, Celotex, Xtratherm, Ursa, Low-E, Cedral, Kingspan, Dufaylite, British Gypsum, K-rend, Ecotherm, Iko enertherm, Kay-Metzeler, Terrawool to allow you to complete your insulation job on time at competitive prices and the highest standards.

 

Whether you are a large company or a DIYer, if you need a large amount of insulation materials, we can offer quantity discounts at the best prices. Please contact us and our friendly customer service will try to find the best and cheapest solutions for you. We value your time and we will try to deliver the products as soon as possible at a reasonable price to your construction site or house. The UK's leading insulation supplier near you and your needs. Price List available upon request.
Ceresit CT325 GlassFibre Rendering Mesh Roll - 55m2
Ceresit CT325 GlassFibre Rendering Mesh Roll ǀ 55m2
£ 125.83