Largely manufactured from recycled glass (e.g. windscreens) and mineral base materials such as sand and without the use of binding agents. The ingredients are melted into molten glass, which is cooled and crushed into a fine powder. The powdered glass is poured into molds and heated (below the melting point) in a "sintering" process that causes the particles to adhere to one another. Next, a small amount of finely ground carbon-black is added and the material is heated in a "cellulation" process. Here, the carbon reacts with oxygen, creating carbon dioxide, which creates the insulating bubbles in the (material). CO2 accounts for more than 99% of the gas in the cellular spaces.
Cellulose insulation is a material made from recycled newspaper. The paper is shredded and inorganic salts, such as boric acid, are added for resistance to fire, mould, insects and vermin. The insulation is installed either blown or damp-sprayed depending on application.
Wood fibre
The success of wood fibre insulation derives from an attractive environmental profile combined with a whole bag of functions including rigid insulation, sheathing and sarking for timber frames, roofs and flooring as well as flexible insulation for studs and rafters.
Wood of course is renewable, it sequesters carbon during its growth and product production is relatively free from pollution. The insulation value of wood fibre boards is not as dimensionally efficient as some of the orthodox petro-chemical materials - but it's no slouch either - typically coming in with a 'k value' range of between 0.038-0.043 W/mK depending on format.
Hemp
Hemp fibres are produced from hemp straw of the hemp plant. Most hemp is imported, but an increasing amount of home-grown crop is becoming available. Hemp grows up to a height of nearly 4 metres within a period of 100-120 days. Because the plants shade the soil, no chemical protection or toxic additives are required for hemp cultivation. The product is composed of, usually, 85% hemp fibre with the ballance made up of polyester binding and 3-5% soda added for fire proofing.
Straw
Straw is an agricultural by-product, the dry stalks of cereal plants, after the grain and chaff have been removed. Straw makes up about half of the yield of cereal crops such asbarley, oats, rice, rye and wheat.
100mm Unilin ECO/MA 360 Floor Insulation is a bio-enhanced, superior performance PIR rigid foam insulation board suitable for underfloor heating, solid and suspended floors.
It is lightweight, easy to install and combines high compressive strength with low thermal conductivity, providing a high p..
Unilin ECO/MA 360 Premium Floor PIR Insulation Board (Floorboard)
High performance - Thermal conductivity (lambda value) of 0.020 W/mK
100mm Unilin ECO360 meets U-Values specified in the Building Regulations
RIBA/RIAI Climate Challenge 2030, LETI Standards, Future Homes Hub targets
Bio-enhanced board will significantly improve the U-Value of new and existing floors
100mm Unilin ECO/MA 360 Roof Insulation is a bio-enhanced, superior performance PIR rigid foam insulation board suitable for sloped roofs (ventilated, hybrid or warm roof).
Using pioneering environmentally conscious technology, ECO360 MA in roof applications will reduce heat loss while also deliv..
100mm Unilin ECO/MA 360 Bio-enhanced Roof PIR Insulation Board
High performance - Thermal conductivity (lambda value) of 0.020 W/mK
Unilin ECO360 Roofs meets U-Values specified in the Building Regulations
RIBA/RIAI Climate Challenge 2030, LETI Standards, Future Homes Hub targets
Bio-enhanced board will significantly improve the U-Value of new and existing roofs
100mm Unilin ECO/MA 360 (Sarking) Pitched Warm Roof Insulation is a bio-enhanced, superior performance PIR (polyisocyanurate) rigid foam insulation board suitable for pitched roofs.
Unilin Sarking Warm Roof Construction Board has the strength and thermal properties required to reach the high perf..
100x225x1200mm Hyfloor Strip Foundation System Unilin XT/HYF is an engineered floor insulation used to achieve Future Homes Standard and passive floor performance.
The Hyfloor Strip Foundation System provides effective insulation that has been detailed and installed professionally at the initial ..
100x225x1200mm Hyfloor Strip Foundation System Unilin XT/HYF
Engineered floor insulation with high performance foundation riser panels
Used to achieve Future Homes Standard and passive floor performance
Hyfloor System that provides thermal performance and robust detailing
Suitable for use with built-in full fill and partial fill wall insulation
110mm Celotex XR4000 PIR Insulation Board (XR4110) is an easy to cut and install multi-purpose polyisocyanurate rigid foam insulation board featuring a low emissivity foil facings that is suitable for floor, wall, roof and ceiling cut-to-fit applications.
Celotex Insulation Board is an excellent ..
110mm Unilin ECO/CT CavityTherm 360 is an engineered full fill cavity insulation system providing added resilience against increases in wind-driven rain resulting from climate change.
When built into a traditional 110-150mm cavity using standard foundation widths and local building materials ECO/..
110mm CavityTherm ECO/CT Unilin Full Fill Cavity Insulation Board
Unilin ECO/CT 360 (CavityTherm) achieves U-Values down to 0.12 W/m2K
Lambda value of 0.020 W/mK with pioneering environmentally sensitive features
Minimising the threat of Thermal Bridging and improving the U-Value of the wall
Meets both the Climate Challenge 2030 and Low Energy Transformation Initiative
12mm Celotex TB4000 PIR Insulation Board (TB4012) is an easy to cut and install multi-purpose polyisocyanurate rigid foam insulation board featuring a low emissivity foil facings that is suitable for floor, wall, ceiling and roof cut-to-fit applications.
Celotex Board is an excellent high-perform..
15mm PIR Rigid Insulation Board Xtratherm (Unilin) 1200mm x 1200mm is a thinnest rigid foil faced polyisocyanurate (PIR) thermal foam insulation board designed for roofs, walls, floors, timber and steel framed systems.
Unilin (Xtratherm) PIR insulation boards are stable, rot proof and will remain..
1200mm x 1200mm x 15mm
Foil Faced PIR Rigid Foam Insulation Board
Certified thermal conductivity as low as 0.022W/mK!
15mm Unilin XT/PR Thin-R Pitched Roof PIR Insulation Board is a thinnest PIR rigid thermal foam insulation board used in roof construction to achieve Future Home and Passive House Standards.
XT/PR Unilin PIR Board is a high performance foil faced rigid insulation foam with a certified thermal con..
15mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
15mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
15mm Unilin XT/TF Thin-R Timber Frame Insulation Board is a thinnest PIR rigid thermal foam insulation board used in wall construction to achieve Future Home and Passive House Standards.
XT/TF Unilin PIR Board is a high performance foil faced rigid insulation foam with a certified thermal conduct..
15mm Unilin XT/UF Thin-R Floor Insulation Board is a thinnest PIR rigid thermal foam insulation board used in floor construction to achieve Future Home and Passive House Standards.
XT/UF Underfloor Unilin PIR Board is a high performance insulation with a certified thermal conductivity of 0.022W/m..
15mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
15mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
15mm Unilin (Xtratherm) Thin-R Insulation Board (2400mm x 1200mm x 15mm) is an ultra thin rigid foil faced polyisocyanurate (PIR) thermal foam multi-application insulation board designed for roofs, walls, floors, timber and steel framed systems.
Xtratherm (Unilin) Thin-R range is a high-efficienc..
20mm Kingspan ThermaFloor TF70 Floor Board is a fibre-free rigid thermoset foam insulation board used to insulate solid concrete, suspended ground floors and for use with underfloor heating systems.
Thermafloor TF70 Kingspan is a high performance flooring insulation suitable for use below the scr..
Thermal conductivity of 0.022 W/mK
Easy to handle and install
BBA Certificate 14/5133
NSAI Agrément Certificate 03/0196
INSULATION FOR SOLID CONCRETE AND SUSPENDED GROUND FLOORS
Kingspan ThermaPitch TP10 Board 20mm is a high performance pitched roof insulation board with fibre-free rigid thermoset PIR foam core used for under rafter or between and over joist applications.
20mm Thermapitch TP10 Kingspan PIR 2400mm x 1200mm board is an insulation sheet suitable for tiled o..
Thermal conductivity of 0.022 W/mK
Easy to handle and install
BBA Certificate 14/5133
NSAI Agrément Certificate 03/0196
INSULATION FOR TILED OR SLATED PITCHED WARM ROOF SPACES
20mm Kingspan Thermawall TW55 Insulation Board is a rigid insulation board used between studs or as an insulating sheathing material for steel and timber framing wall applications.
Thermawall TW55 Kingspan is a high performance insulation board suitable for use with timber frame and steel frame w..
25mm Celotex CW4000 Partial Fill Cavity Wall Insulation Board (CW4025) is an easy to install PIR (polyisocyanurate) rigid insulation board, featuring a low emissivity foil facings with excellent thermal conductivity of 0.022 W/mk that is suitable for partial fill masonry cavity wall applications.
..
25mm EcoTherm EcoVersal PIR Insulation Board 5 in 1 Solution is a universal multi-purpose fibre free rigid polyisocyanurate insulation core faced with an aluminium foil composite on both sides designed for insulating pitched roofs, floors, walls, ceilings and dormer cheeks.
Ecotherm Eco-Versal 24..
25mm Xtratherm FR/ALU Flat Roof PIR Insulation Board Thin-R is a top-class polyisocyanurate foam core insulation board with vapour resistant gas-tight foil facers suitable for loose laid ballasted and mechanically fixed single ply waterproofing systems.
Thin-R FR/ALU is a thermally efficient roof..
BBA Certification No. 11/4817
Vapour resistant foil facers
Loose laid ballasted systems
Thermal Conductivity: 0.022W/mK
Compatible with mechanically fixed single ply systems
25mm Xtratherm Thin-R FR/BGM Flat Roof Insulation Board is a high-quality polyisocyanurate core (PIR) rigid insulation board with bitumen glass fibre and mineral glass facings designed for partially bonded, torched-on and built-up bituminous felt systems.
Thin-R Xtratherm FR/BGM 25mm x 1200mm x 1..
BBA Certification No. 11/4878.
Built-up Bituminous Felt Systems
Insulation for Torched-on Systems
Insulation for Partially Bonded Systems
Mechanically Fastened or Loose Laid Ballasted Bituminous Systems
25mm Xtratherm FR/MG is a PIR insulation board with mineral coated glass facers designed for use below single ply fully adhered roof membranes, single ply waterproofing systems and partially bonded built-up felt.
Xtratherm Flat Roof Thin-R board is compatible with adhesively bonded single ply roo..
25mm Recticel Eurothane General Purpose Insulation Board is an easy to cut and fit PIR rigid insulation board faced with a gas diffusion tight multilayer foil on both sides that is suitable for pitched roof, timber and steel framed walls, ceilings and floor applications.
Recticel Eurothane GP 240..
25mm Unilin FR/ALU Thin-R Flat Roof Insulation Board comprising a rigid polyisocyanurate (PIR) insulation board with a composite gas-tight foil facings on both sides.
Flat Roof Board FR/ALU is used as a thermal insulation and to create or improve falls on limited access concrete, timber or metal ..
25mm Unilin FR/ALU Thin-R Flat Roof PIR Insulation Board
Rigid PIR Insulation Board with a gas-tight foil facings on both sides
Used as a thermal insulation on timber or metal flat roof decks
High Performance Board used in conjunction with a vapour control layer
Used with a single-ply mechanically fixed roof waterproofing membrane
The 25mm Unilin Thin-R FR/BGM Flat Roof Insulation Board is faced with a polypropylene fleece finished bitumen glass-fibre working surface and a mineral glass facing to the underside.
FR/BGM boards are suitable for use with most bitumen based, partially bonded waterproofing systems typically incl..
Unilin FR/BGM Flat Roof Insulation Board 25mm x 1200mm x 1200mm
Faced with a polypropylene fleece finished bitumen glass-fibre working surface
Faced with a mineral glass facing to the underside insulation board surface
Used for partially bonded torched-on built-up bituminous felt systems
Can be used as a cheaper alternative to Celotex and Kingspan TR24 Insulation
25mm Unilin Flat Roof FR/MG is a high performance Polyisocyanurate with mineral coated glass facers suitable for use below single ply waterproofing systems and partially bonded built-up felt.
FR/MG Insulation Board for use as a thermal insulation layer and to create or improve falls on limited ac..
25mm x 1200mm x 1200mm Unilin FR/MG Flat Roof Insulation Board
High Performance PIR Insulation Board with mineral coated glass facers
For concrete, timber or metal flat roof decks in domestic and non-domestic buildings
Used below single ply waterproofing systems and partially bonded built-up felt
Can be used as a cheaper alternative to Celotex and Kingspan Therma Roof Insulation
25mm Unilin Thin-R XT/CW PIR Cavity Insulation Board is used in traditional masonry walls, built to the highest thermal standards whilst maintaining a residual cavity, offering protection from wind driven rain.
Unilin Cavity Wall (T&G) tongue and groove jointing offers a practical onsite solution..
25mm Unilin Thin-R XT/CW Partial Fill Cavity Wall Insulation Board
Reduced the Thermal Bridging and improved the U-Value of the wall
Low emissivity foil facing on XT/CW improves the thermal performance
Recommended residual cavity width is 50mm (Building Regulations)
Most effective method of preventing wind-driven rain penetrating a wall
25mm Unilin Xtroliner XO/PR is a warm roof construction board, comprising a rigid foam modified Polyisocyanurate (PIR) core with robust textured low emissivity aluminium foil facings.
Using XO/PR used above or between the roof rafters ensures that the structure is kept at or near the internal env..
25mm Unilin XO/PR XtroLiner Pitched Warm Roof PIR Insulation Board
Used above or between the rafters reducing thermal stress and condensation risk
Rigid foam modified Polyisocyanurate (PIR) core with textured robust facings
Lambda (thermal conductivity) of 0.021 W/mK and Euroclass C s2 d0 fire classification
Used on ventilated, hybrid or warm and sloped roofs to achieve most efficient U-values
25mm XO/UF Underfloor Heating Insulation Board Xtratherm Xtroliner is an improved performance PIR (polyisocyanurate) rigid foam floor insulation board with robust textured foil facings designed for ground supported floors, suspended floors and underfloor heating.
Xtratherm Xtroliner XO/UF is a BB..
Suitable for Underfloor Heating - UFH
High Compressive Strength >150 (kPa)
Premium PIR Insulation - Thermal Conductivity: 0.021W/mK
25mm XtroDeck XO/XD Unilin is faced with an embossed aluminum facing on both sides high performance flat roof board used for partially bonded, self adhered built-up bituminous felt roof systems.
Flat Roof Insulation XO/XD is manufactured to EN 13165 by Unilin Insulation with a declared lambda (th..
25mm Unilin Xtroliner XtroDeck XO/XD Flat Roof PIR Insulation Board
Premium Rigid PIR Insulation Board with an embossed aluminum facings
Used for partially bonded, self adhered built-up bituminous felt roof systems
Lambda (thermal conductivity) of 0.021 W/mK and Euroclass C s2 d0 fire classification
Unilin XtroDeck XO/XD flat roof insulation board may also be fully bonded
Tapered Roof Unilin TR/ALU 30-50mm is the tapered version of Flat Roof FR/ALU, it is faced on both sides with composite gas tight foil facings bonded to a Polyisocyanurate (PIR) core during manufacture.
Unilin TR/ALU Tapered Roof systems address most flat roof failures i.e. ponding of rainwater c..
30-50mm Unilin TR/BGM (Torch-on) is a high performance PIR tapered roof insulation with a polypropylene fleece finished bitumen/glass fibre working surface and a mineral glass facing to the underside.
Unilin TR/BGM boards are not reversible, they are suitable for use below most bitumen based part..
30-50mm Unilin Tapered Roof TR/MG is a high performance PIR with mineral coated glass facers used below single ply fully adhered roof membranes, waterproofing systems and partially bonded built-up felt.
Unilin TR/MG tapered roof insulation boards are embedded in a layer of bitumen on a 3G type fe..
30mm IKO Enertherm ALU PIR Insulation Board is a multi-functional insulation board with a rigid polyisocyanurate foam core, clad on both sides with a multi-layer gas-tight aluminium construction.
IKO PIR Insulation Board 30mm can be used on flat roofs, pitch roofs, loft floors, cavity walls, clad..
32.5mm Ultra Liner Insulated Plasterboard is a high-performance PIR rigid insulation board bonded to 12.5mm tapered edge plasterboard used for walls, ceiling and pitched roof applications.
This ultimate thermal laminate insulation board provides high levels of insulation and drylining in one appl..
32.5mm x 1200mm x 2400mm PIR Insulated Plasterboard
Ultimate thermal laminate insulation board for drylining
Ultraliner is used for walls, ceiling and pitched roof applications
PIR insulation core thermal conductivity (lambda) of 0.022W/mK
Ultra Liner PIR provides an effective Vapour Control Layer (VCL)
38mm British Gypsum Gyproc ThermaLine PIR is an Insulated Plasterboard made from 12.5mm Gyproc WallBoard bonded to a 25.5mm rigid PIR (polyisocyanurate) foam with a multi-layer kraft aluminium facings on both sides of the insulation foam board.
Gyproc Thermaline PIR 38mm is a simple and cost-effe..
38mm Gyproc ThermaLine PIR Insulated Plasterboard
Multi-layer kraft aluminium facings on both sides
For both refurbishment and new build projects
Simple and cost-effective 2 in 1 insulated plasterboard
Provides insulation and dry lining in one operation
40mm Kingspan TW50 Thermawall Cavity Wall Insulation Board is a high-efficiency, BBA certified cavity insulation board designed for partial fill masonry cavity walls.
Thermawall TW50 is a stable and rot proof cavity wall insulation board used in newbuild and extension projects and will remain eff..
40mm Xtratherm XT/CW Partial Fill Cavity Wall is a high-quality, BBA certified, tongue and groove PIR insulation board with certified thermal conductivity of 0.022 W/mK designed for use in traditional masonry partial fill cavity walls.
Xtratherm Cavity Wall is a highly-durable, rot proof insulati..
50mm Celotex GA4000 PIR Insulation Board (GA4050) is an easy to cut and install multi-purpose polyisocyanurate rigid foam insulation board featuring a low emissivity foil facings that is suitable for wall, floor, ceiling and roof cut-to-fit applications.
Celotex Insulation Board is an excellent h..
50mm Spiral Anchor Fixing is an ideal lightweight fixing used for reducing thermal bridging when fixing lightweight items to an External Wall Insulation (EWI) systems.
Spiral Anchors Lightweight Fixings 50mm can be used to fix lightweight objects onto completed external wall insulation systems, ..
50mm Spiral Anchor Lightweight Fixings
Used to fix lightweight objects onto EWI systems
Made of plastic to keep thermal bridging at a minimum
Installed with commercial drill tool or screw driver
50mm XO/CW T&G Unilin, comprising a rigid polyisocyanurate (PIR) foam insulation board with a textured aluminium foil-facing on both sides, for use as partial fill insulation.
Xtroliner XO/CW improves U-Values and meets Future Homes standards, providing an excellent choice for passive and low ene..
50mm Unilin XO/CW T&G Insulation Board for Partial Fill Cavity Walls
Xtroliner XO/CW improves U-Values and meets Future Homes standards
XO/CW Providing an excellent choice for passive and low energy builds
Can achieve a passive U-Value of 0.15 W/m2K in a traditional cavity wall
Lambda (thermal conductivity) of 0.021 W/mK and Euroclass C s2 d0 fire class
50mm Unilin XO/SK XtroLiner Sarking (T&G) is an engineered tongue and grooved external roof insulation system with robust facings which meets the passive U-Value of 0.15 W/m2K.
The XtroLiner Sarking XO/SK offers a robust continuous layer of insulation, minimising the threat of Thermal Bridging an..
50mm Unilin XO/SK XtroLiner Sarking Warm Roof Construction Board (T&G)
XO/SK used over the rafters to meet the passive U-Value of 0.15 W/m2K
Unilin XO/SK engineered tongue and grooved external roof insulation system
Rigid foam modified Polyisocyanurate (PIR) core with textured robust facings
Lambda (thermal conductivity) of 0.021 W/mK and Euroclass C s2 d0 fire class
50mm Unilin XT/CWP Thin-R Plus Partial Fill Cavity is a partial fill cavity system with engineered tongue and grooved joints to ensure insulation continuity and minimisation of thermal bridging.
The lower lambda (thermal conductivity) of 0.021 W/mK improves U-Values of the cavity and meets Future..
50mm Unilin Thin-R PLUS XT/CWP Partial Fill Cavity Wall Insulation
Reduced the Thermal Bridging and improved the U-Value of the wall
Low emissivity foil facing on XT/CWP improves the thermal performance
Recommended residual cavity width is 50mm (Building Regulations)
Most effective method of preventing wind-driven rain penetrating a wall
50mm Unilin XO/FB XtroLiner Framing Board is an insulation board designed for use in a wide range of constructions including steel or timber frame applications up to 11m in height.
XO/FB Framing Board used into the traditional cavity of the construction improves the value of the walls over the tr..
Unilin XO/FB XtroLiner Framing Board (Steel and Timber Frame Applications)
Rigid foam modified Polyisocyanurate (PIR) core with textured robust facings
Lambda (thermal conductivity) of 0.021 W/mK and Euroclass C s2 d0 fire class
Used between studs or as an insulated sheathing in a wide range of constructions
Suitable for new build and refurbishment projects in buildings up to 11m in height
50mm Xtratherm Thin-R XT/CWP Cavity Wall Plus is a robust tongue and groove jointing PIR (polyisocyanurate) rigid insulation board with a low emissivity foil facings, used for traditional masonry partial fill cavity walls.
XT/CWP Cavity Wall Plus (T&G) is the best solution when building tradition..
50mm Xtratherm XT/CWP Cavity Wall Plus Insulation Board
Lower Lambda value (thermal conductivity) of 0.021 W/mK
Enhanced performance PIR (polyisocyanurate) rigid insulation
Easy to install tongue and groove (T&G) jointing system
Used as a traditional masonry partial fill cavity wall insulation
50mm Xtratherm Xtroliner XO/CW is an improved performance PIR (polyisocyanurate) tongue and groove insulation board with robust foil facings designed for partial fill cavity wall insulation with an approved thermal conductivity (lambda value) as low as 0.021W/mK.
This lower lambda improves U-Valu..
50mm Xtratherm Xtroliner Framing Board XO/FB is an improved performance PIR (polyisocyanurate) insulation board with robust textured foil facings designed for use in a wide range of construction including steel or timber frame applications up to 18m in height.
The Xtratherm Xtroliner XO/FB framin..
BBA Certificate 12/4956
Thermal Conductivity: 0.021W/mK
Reaction to Fire Euroclass C-s2, d0
Reduced Thermal Bridging - Robust Textured Foil
Suitable for Newbuild and Renovation up to 18m in height
50mm XO/SK Xtratherm Xtroliner Warm Pitched Roof Insulation is an improved performance PIR (polyisocyanurate) engineered tongue and grooved insulation board with robust textured foil facings designed for use in warm roof construction systems.
Xtratherm Xtroliner XO/SK 50mm is a premium external r..
50mm Unilin XO/UF XtroLiner Floorboard is faced with an embossed aluminum facing on both sides high performance floor insulation board suitable for underfloor heating applications.
Unilin XO/UF is lightweight, easy to install and combines high compressive strength with low thermal conductivity, p..
56mm Kingspan Thermaroof TR31 Structural Plywood Insulation for Flat Roof Decking is a high-quality 50mm PIR insulation board bonded to 6mm FSC certified plywood on one side and multilayer foil on the reverse side.
Kingspan TR31 Composite Structural Flat Roof PIR Board is a 3 in 1 solution desig..
56mm Unilin XO/STP Xtroliner Soffit Plus is an effective thermal and fire performance insulation solution used in structural ceiling applications in both commercial and residential buildings.
XO/STP Soffit Plus, comprising a rigid modified PIR core bonded to an impact-resistant 6mm building panel..
56mm Unilin XO/STP XtroLiner Soffit Plus Insulation for Structural Ceiling
Thermal and fire performance solution in structural ceiling applications
High performance insulation used in commercial and residential buildings
Impact-resistant 6mm building panel to which a decorative finish may be applied
Thermal conductivity (lambda) of 0.021 W/mK, Euroclass B s1 d0 fire classification
56mm Xtratherm Xtroliner XO/STP Soffit Insulation Board is a top-class two-in-one PIR insulation product which provides an effective thermal and fire performance solution in structural ceiling applications.
Used in commercial and residential buildings that can be fixed directly to the concrete sl..
75mm Unilin CavityTherm CT/PIR Insulation Board is a high performance composite board of enhanced PIR with a lambda value of 0.021 W/mK, for full fill cavity wall applications.
CavityTherm is proven to provide the most cost effective answer, not only reaching Future Homes Standard fabric U-Values..
75mm CavityTherm Unilin Insulation for full fill cavity wall applications
CavityTherm is an innovative built-in insulation for traditional walls
CavityTherm achieves passive level U-Values as low as 0.12 W/m2K
Made of an enhanced PIR core with thermal conductivity of 0.021W/mK
CavityTherm Unilin is a continuous insulation system for full fill cavities
75mm Xtratherm CT/PIR CavityTherm Thin-R is a cost effective rigid polyisocyanurate thermal insulation board used for traditional full fill cavity walls to provide excellent U-Values and meet the Passive House standards.
Xtratherm CT/PIR Cavity Wall insulation is a top-class composite board of en..
75mm Recticel Eurowall PLUS PIR Cavity Insulation Board is a high-performance polyisocyanurate rigid foam insulation board faced with a gas diffusion tight multilayer foil on both sides suitable for full fill cavity wall applications with a minimum residual cavity of 10mm, up to 25m in height.
Eu..