2-3mm Isocheck Barrier Mat 5 for Metal Roofs is a specially designed weight-enhanced Barrier Mat system used for airborne, low-frequency damping properties in metal roof applications.

Isocheck Barrier Mat 5kg (1.2m x 2.0m) is made of high-density barium sulphate loaded thermoplastic polymer, plasticized with phthalate esters and containing mineral fillers.

Airborne Improvement System Isocheck Barrier Mat is black in colour, bitumen free, ecologically neutral and recyclable with strong environmental credentials.

2-3mm Isocheck Barrier Mat 5 is an ideal solution for upgrades when looking to improve airborne sound reduction with minimal increase in height and depth within floors and walls.

Barrier Mat 5 can be laid directly over a profiled metal deck in a flat roof or built up metal standing seam roofing.

Isocheck Barrier Mat 5kg contain a high performance material that has been acoustically tested at a UKAS certified independent test laboratory.

Tested and Rated according to: BS EN ISO 717-1:2013 and BS EN ISO 10140-2:2010.

Barrier Mat 5kg is suitable for conversions, refurbishments or listed buildings requiring minimal structural change.

Specification:

Thickness: 2-3mm

Width: 1200mm

Length: 2000mm

Size: 2-3mm x 1200mm x 2000mm

Profile: Weight-enhanced Barrier Mat

Material: Barium sulphate loaded thermoplastic polymer

Colour: Black

Weight: 12.07kg

Isocheck Barrier Mat 5kg Features:

 · Bitumen free.

 · Ecologically neutral.

 · Only 2-3mm thick mat.

 · 1.2m wide x 2.0m long.

 · Suitable for metal roofs.

 · High performance material.

 · Airborne improvement system.

 · Ideal solution for upgrades.

 · Specially designed weight-enhanced barrier mat.

 · Containing phthalate esters and mineral fillers.

 · Recyclable with strong environmental credentials.

 · Used for airborne, low-frequency damping properties.

 · Suitable for refurbishment and conversion projects.

 · Suitable for listed buildings requiring minimal structural change.

 · Made of high-density barium sulphate loaded thermoplastic polymer.

 · Acoustically tested at a UKAS certified independent test laboratory.

 · Improve airborne sound reduction with minimal increase in height and depth.

 · Tested and Rated according to: BS EN ISO 717-1:2013 and BS EN ISO 10140-2:2010.

Isocheck Barrier Mat 5 for Metal Roofs Installation Guidelines:

 · Barrier Mat is ideal for projects when looking to improve airborne sound reduction with minimal increase in height and depth.

 · Laid directly over a profiled metal deck in a flat roof or built up metal standing seam roofing.

 · Lay Barrier Mat directly over the steel deck, across the line of the profiles.

 · The metal decking must be clean and dry.

 · Overlap Barrier Mat by 50mm min. at joints.

 · Fit a polythene VCL between the barrier mat and the insulation.

 · A mechanically fastened single ply membrane should then be laid in accordance with manufacturer’s instructions / recommendations.

 · Form day joints at the conclusion of each section of work to seal exposed edges of the insulation and membrane.

 · Install all components in accordance with BS 6229:2003 Flat roofs with continuously supported coverings code of practice.

 · In most instances, the fixings for the membrane and insulation will mean no additional fixings for barrier mat are required.

 · For advice on treatment of services and penetrations, consult our brochure or visit our website.

 · Can also be used in timber floors and walls (see separate data sheet - Isocheck Barrier Mat 10kg).

 · If in doubt in any area, please call Isomass prior to commencement of work.

*Further information may be found in our Downloads section.

Fairly easy access to all PDF files.

Datasheet ǀ Declaration of Performance - DoP ǀ BBA Certificate ǀ Installation Guide ǀ Certificates ǀ Brochure ǀ SPEC Sheet 

*Special Product - Non returnable cancelable.